Commit Graph

104 Commits

Author SHA1 Message Date
Clemens Ladisch
271ebfca58 [ALSA] virtuoso: separate D2/D2X init functions
Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
10e6d5f9b6 [ALSA] oxygen: add I2C support
Add a function to write I2C registers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
e97f79994a [ALSA] oxygen: fix line-in recording selection (now for real)
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:30 +02:00
Clemens Ladisch
43dd89c7e7 [ALSA] oxygen: disable clock of unused I2S inputs
Disable the master clock outputs of any unused I2S inputs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
db12b8e301 [ALSA] oxygen: move MIDI flag to model struct
Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
87eedd2fd4 [ALSA] oxygen: make SPI/2-wire configuration model-specific
Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
f009ad9b39 [ALSA] oxygen: change model-specific PCM device configuration
When specifying which PCM devices to use, model drivers now use flags
that also specify the routing between PCM devices and DMA channels
instead of just DMA channel bits.  This simplifies some code that checks
for these flags.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
fa5d8106cb [ALSA] oxygen: add monitor controls
Add controls to enable monitoring of the analog and digital inputs.

To allow monitoring after loading the driver when nothing has been
played back or recorded yet, the I2S input and outputs are initialized
to a valid configuration.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Clemens Ladisch
33fa724e29 [ALSA] virtuoso: move PCM1796 symbols to a header file
Move the PCM1796 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Clemens Ladisch
f5b2368ba8 [ALSA] oxygen: move WM8785 symbols to a header file
Move the WM8786 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Harvey Harrison
ff143874d0 [ALSA] sound: virtuoso.c fix shadowed variable warning
Use priv_idx as an identifier.
sound/pci/oxygen/virtuoso.c:277:15: warning: symbol 'index' shadows an earlier one
sound/pci/oxygen/virtuoso.c:56:12: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:18 +02:00
Clemens Ladisch
b930b9f41d [ALSA] oxygen: add owner field
I forgot to set the module owner for the HiFier/Xonar models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-29 11:28:16 +01:00
Clemens Ladisch
902b05c117 [ALSA] oxygen: fix line-in recording selection
The GPIO pin 0 of the CM9780 must be set when muting the line input even
on non-Xonar cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Takashi Iwai
f007dc045a [ALSA] oxygen - Fix section mismatch
Removed invalid __devinit and __devexit that are remaining after
split to a helper module.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Clemens Ladisch
2ea85986dd [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
While the AK4396 and WM8785 datasheets say that the SPI clock cycle
length must be at least 200 ns, 320 ns seems not to work reliably with
the controller, so we better use 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:23 +01:00
Clemens Ladisch
7c0141591f [ALSA] virtuoso: monitor external power on D2X
On the Xonar D2X, monitor the GPIO pin that indicates whether external
power is present.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:18 +01:00
Clemens Ladisch
5f7b9b4577 [ALSA] oxygen: add front panel capture
When a second AC97 codec is present, add a PCM device for capturing from
the front panel.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
a360156049 [ALSA] oxygen: add front panel controls
Add mixer controls for the front panel AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
1e821dd276 [ALSA] oxygen: use AC97 interrupt
After an AC97 register read or write, use the AC97 interrupt instead of
polling to wait for the access to be completed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
911b499af4 [ALSA] oxygen: make line-in exclusive only on Xonar
Move the line input switching code to the Virtuoso driver because only
the Xonar cards bypass the analog mixer for line input.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
236c4920ea [ALSA] oxygen: fix AK4396 double rate upper limit
Fix the upper sample rate limit for the double rate mode of the AK4396
to the value from the datasheet.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:16 +01:00
Clemens Ladisch
c626026dd7 [ALSA] add TempoTec HiFier driver
Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch
b78e3dbb04 [ALSA] oxygen: more initialization
Initialize more registers of the controller and the second AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch
976cd62700 [ALSA] oxygen: make the number of analog output configurable
Add a field to struct oxygen_model to allow model drivers for cards with
less than eight output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Clemens Ladisch
cd93dc8cca [ALSA] oxygen: remove MIDI for generic cards
None of the reference design models have MIDI, only the X-Meridian
allows to connect a MIDI adapter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:13 +01:00
Clemens Ladisch
33c646e4ff [ALSA] oxygen: fix SPDIF input rates
Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not
supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:13 +01:00
Clemens Ladisch
02f21c9d6b [ALSA] oxygen: add SPDIF loopback control
Add a mixer control for the SPDIF loopback function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:09 +01:00
Clemens Ladisch
c57cccc038 [ALSA] oxygen: optimize snd_pcm_hardware structures
Add one more indirection to the lookup of the snd_pcm_hardware
structures so that we can save the space of the duplicate ones.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
7f0b89465b [ALSA] oxygen: add 192 kHz SPDIF input support
Change the oxygen_spdif_input_bits_changed() function so that clock
changes on the SPDIF input are correctly detected.  This means that
sample rates greater than 96 kHz are now supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
5a256f862c [ALSA] oxygen: fix DAC source register fields
Fix some wrong values for the definitions of the source masks for DACS 1
and 3.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
e9d88a8bd9 [ALSA] oxygen: fix control filter
Actually use the template that was maybe changed by the control filter
instead of the original one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
7ef37cd954 [ALSA] oxygen: move model-specific data out of common header
Instead of having model-specific fields in the common struct oxygen, put
them into a private structure that is allocated together with the card
structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
3b94253bc9 [ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785
According to the datasheets, the SPI clock cycle must be at least 200 ns
for the AK4396 and the WM8785, so we cannot use the default 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
71e22a4b77 [ALSA] oxygen: allow more sample rates with WM8785
Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards
that have a WM8785 ADC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
878ac3ee76 [ALSA] oxygen: add more symbols
Add symbol definitions for the various codecs and GPIO pins.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
44fb7aae82 [ALSA] oxygen: remove MIDI autodetection
The MIDI bit in the MISC register is set by default and cannot be used
to detect the presence of a MIDI port.  Instead, add a parameter to the
oxygen_pci_probe() function so that model drivers can specify this.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:06 +01:00
Clemens Ladisch
db2396d495 [ALSA] oxygen: fix pause handling
Use the DMA_PAUSE register for pausing instead of stopping DMA.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:06 +01:00
Clemens Ladisch
c9946b2c80 [ALSA] oxygen: remove magic numbers
Replace some magic numbers with register symbols.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:05 +01:00
Clemens Ladisch
e005954934 [ALSA] oxygen: fix playback routing
The default playback routing must be 0xe4, not 0xe1; the front and
surround DACs were exchanged.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:04 +01:00
Clemens Ladisch
c2353a0826 [ALSA] oxygen: add register definitions
Add more symbols for registers and register fields.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:04 +01:00
Clemens Ladisch
05855ba3f4 [ALSA] oxygen: make the I2S format configurable
Add proper register bit symbols for the I2S format field, and allow card
models to configure the I2S format to be used for the DACs and ADCs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:03 +01:00
Clemens Ladisch
747c6016ce [ALSA] oxygen: make PCM limits configurable
Add a callback to the model structure to allow modification of the
hardware PCM limits.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
ccc80fb467 [ALSA] oxygen: add control filter to model struct
Allow the models to modify mixer controls before they are added to the
card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
e85e09250a [ALSA] oxygen: make all DMA channels configurable
Allow the card models to specify whether each of the hardware DMA
channels is used.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
84aa6b7ba7 [ALSA] oxygen: make SPI configuration configurable
Add a field to the model structure so that it is possible to have a card
where the SPI outputs 4 and 5 are used for an EEPROM.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:59 +01:00
Clemens Ladisch
31c77643a0 [ALSA] oxygen: make AC97 codec optional
Only initialize and create mixer controls for the first AC97 codec when
one has actually been detected.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:59 +01:00
Clemens Ladisch
fb920b7d8b [ALSA] oxygen: rename PCM to Master
Rename the 'PCM Playback Volume'/'Switch' mixer controls to 'Master'.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:58 +01:00
Clemens Ladisch
893e44ba5a [ALSA] oxygen: make line-in switch exclusive
The line input cannot be mixed with the other inputs, so we have to mute
the other input switches when it is selected.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:57 +01:00
Clemens Ladisch
01a3affb2e [ALSA] oxygen: use an array of snd_kcontrol pointers
Use an array for the pointers to known controls so that it is easier to
add more.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:57 +01:00
Clemens Ladisch
7113e95812 [ALSA] oxygen: fix channel routing
Do not exchange the surround and back jacks except when in 7.1 mode
where the surround jack is not rear but side.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:56 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Clemens Ladisch
740eb8358f [ALSA] oxygen: use uintptr_t in pointer casts
When we store the DMA channel number in the substream's private_data
pointer, use uintptr_t as an intermediate step when casting from/to
unsigned int to prevent the compiler from whining when the pointer size
is different.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:44 +01:00
Clemens Ladisch
1b8ff22fa8 [ALSA] add Asus Xonar driver
Add the snd-virtuoso driver for the Asus Virtuoso 200 chip used on the
PCI and PCI-E models of the Xonar sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:44 +01:00
Clemens Ladisch
d0ce9946c5 [ALSA] add CMI8788 driver
Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on
the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer,
Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1,
Sondigo Inferno, and TempoTec HIFIER sound cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:44 +01:00