Some systems share FTLB RAMs or entries between sibling CPUs (ie.
hardware threads, or VP(E)s, within a core). These properties require
kernel handling in various places. As a start this patch introduces
cpu_has_shared_ftlb_ram & cpu_has_shared_ftlb_entries feature macros
which we set appropriately for I6400 & I6500 CPUs. Further patches will
make use of these macros as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On pre-r6 systems with the MT ASE the CPS SMP code included checks to
halt the VPE running mips_cps_boot_vpes() if its bit in the struct
core_boot_config vpe_mask field is clear. This was largely done in order
to allow us to start arbitrary VPEs within a core despite the fact that
hardware is typically configured to run only VPE0 after powering up a
core. VPE0 would start the desired other VPEs, halt itself, and the fact
that VPE0 started would be largely hidden & irrelevant.
In MIPSr6 multithreading we have control over which VPs start executing
when a core powers up via the cores CPC registers accessed remotely
through the redirect block. For this reason the MIPSr6 multithreading
path in mips_cps_boot_vpes() hasn't bothered up until now to handle
halting the VP running it.
However it is possible to power up cores entirely in hardware by using a
pwr_up pin associated with the core. Unfortunately some systems wire
this pin to a logic 1, which means that it is possible for a core to
power up at a point that software doesn't expect. The result is that we
generally go execute the kernel on a CPU that ought not to be running &
the results can be unpredictable.
Handle this case by stopping VPs that we don't expect to be running in
mips_cps_boot_vpes() - with this change even if a core powers up it will
do nothing useful & all VPs within it will stop running before they
proceed to run general kernel code & do any damage. Ideally we would
produce some sort of warning here, but given the stage of core bringup
this happens at that would be non-trivial. We also will only hit this if
a core starts up after being offlined via hotplug, and when that happens
we will already produce a warning that the CPU didn't power down in
cps_cpu_die() which seems sufficient.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16198/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we get into a state where a core that ought to power down isn't doing
so then the current result is that another CPU gets stuck inside
cps_cpu_die() waiting for CPU that ought to be powering down to do so.
The best case scenario is that we then trigger RCU stall messages or
lockup messages, but neither makes it particularly clear what's
happening.
Handle this more gracefully by introducing a timeout beyond which we
warn the user that the core didn't power down & stop waiting for it.
This at least allows the CPU running cps_cpu_die() to continue normally,
and hopefully presuming the CPU that powered back up is doing nothing
harmful the system will continue functioning as normal.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16197/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Systems using the MIPS Coherence Manager (CM) cannot support multi-core
SMP with dcache aliasing. This is because CPU caches are VIPT, but
interventions in CM-based systems provide only the physical address to
remote caches. This means that interventions may behave incorrectly in
the presence of an aliasing dcache, since the physical address used
when handling an intervention may lead to operation on an aliased cache
line rather than the correct line.
Prevent us from running into this issue by refusing to boot secondary
cores in systems where dcache aliasing may occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16196/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rather than using BUG_ON in the case of an invalid attempt to lock
access to a non-zero VP on a pre-CM3 system, use WARN_ON so that we have
even the slightest chance of recovery.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CM3 provides a GCR_CL_OTHER register per VP, rather than only per core.
This means that we don't need to prevent other VPs within a core from
racing with code that makes use of the core-other register region.
Reduce locking overhead by demoting the per-core spinlock providing
protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 &
higher.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we're running on a system with only 1 possible CPU then it makes no
sense to reserve or initialise IPIs since we'll never use them. Avoid
doing so.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16192/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reduce the log level for branch emulation error messages issued before
sending SIGILL by `__compute_return_epc_for_insn' as these are triggered
by user software and are not an event that would normally require any
attention. The same signal sent from elsewhere does not actually leave
any trace in the kernel log at all.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16402/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This is a user-visible message, so we want it to be spelled correctly.
Fixes: 5f9f41c474 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix:
* commit 8467ca0122 ("MIPS: Emulate the new MIPS R6 branch compact
(BC) instruction"),
* commit 84fef63012 ("MIPS: Emulate the new MIPS R6 BALC
instruction"),
* commit 69b9a2fd05 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC
instructions"),
* commit 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC
instructions"),
* commit c893ce38b2 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and
BEQZALC instructions")
and send SIGILL rather than returning -SIGILL for R6 branch and jump
instructions. Returning -SIGILL is never correct as the API defines
this function's result upon error to be -EFAULT and a signal actually
issued.
Fixes: 8467ca0122 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction")
Fixes: 84fef63012 ("MIPS: Emulate the new MIPS R6 BALC instruction")
Fixes: 69b9a2fd05 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions")
Fixes: 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Fixes: c893ce38b2 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16399/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix commit 319824eabc ("MIPS: kernel: branch: Do not emulate the
branch likelies on MIPS R6") and also send SIGILL rather than returning
-SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
longer supported in R6, except where emulated. Returning -SIGILL is
never correct as the API defines this function's result upon error to be
-EFAULT and a signal actually issued.
Fixes: 319824eabc ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16398/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the more accurate `sigill_r2r6' name for the label used in the case
of sending SIGILL in the absence of the instruction emulator for an
earlier ISA level instruction that has been removed as from the R6 ISA,
so that the `sigill_r6' name is freed for the situation where an R6
instruction is not supposed to be interpreted, because the executing
processor does not support the R6 ISA.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16397/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix commit e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP ASE.") and
send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
ASE instruction has been encountered in `__compute_return_epc_for_insn'
as our Reserved Instruction exception handler would in response to an
attempt to actually execute the instruction. Sending SIGBUS only makes
sense for the unaligned PC case, since moved to `__compute_return_epc'.
Adjust function documentation accordingly, correct formatting and use
`pr_info' rather than `printk' as the other exit path already does.
Fixes: e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP ASE.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 2.6.14+
Patchwork: https://patchwork.linux-mips.org/patch/16396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit fb6883e580 ("MIPS: microMIPS: Support handling of
delay slots.") and actually decode the regular MIPS JALX major
instruction opcode, the handling of which has been added with the said
commit for EPC calculation in `__compute_return_epc_for_insn'.
Fixes: fb6883e580 ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement support for 1 & 2 byte cmpxchg() using read-modify-write atop
a 4 byte cmpxchg(). This allows us to support these atomic operations
despite the MIPS ISA only providing 4 & 8 byte atomic operations.
This is required in order to support queued rwlocks (qrwlock) in a later
patch, since these make use of a 1 byte cmpxchg() in their slow path.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement 1 & 2 byte xchg() using read-modify-write atop a 4 byte
cmpxchg(). This allows us to support these atomic operations despite the
MIPS ISA only providing for 4 & 8 byte atomic operations.
This is required in order to support queued spinlocks (qspinlock) in a
later patch, since these make use of a 2 byte xchg() in their slow path.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement support for parsing 'memmap' kernel command line parameter.
This patch covers parsing of the following two formats for 'memmap'
parameter values:
- nn[KMG]@ss[KMG]
- nn[KMG]$ss[KMG]
([KMG] = K M or G (kilo, mega, giga))
These two allowed formats for parameter value are already documented
in file kernel-parameters.txt in Documentation/admin-guide folder.
Some architectures already support them, but Mips did not prior to
this patch.
Excerpt from Documentation/admin-guide/kernel-parameters.txt:
memmap=nn[KMG]@ss[KMG]
[KNL] Force usage of a specific region of memory.
Region of memory to be used is from ss to ss+nn.
memmap=nn[KMG]$ss[KMG]
Mark specific memory as reserved.
Region of memory to be reserved is from ss to ss+nn.
Example: Exclude memory from 0x18690000-0x1869ffff
memmap=64K$0x18690000
or
memmap=0x10000$0x18690000
There is no need to update this documentation file with respect to
this patch.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16508/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Adjust the atomic loop in the MIPS_ATOMIC_SET operation of the sysmips
system call to branch straight back to the linked load rather than
jumping via a different subsection (whose purpose remains a mystery to
me).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
EVA linked loads (LLE) and conditional stores (SCE) should be used on
EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system
call, or else the atomic set will apply to the kernel view of the
virtual address space (potentially unmapped on EVA kernels) rather than
the user view (TLB mapped).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/16151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.
Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a61 ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.
Invert the branch condition to fix that particular issue.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add a definition of the perf registers for the new I6500 core.
Since I6500 has the same event definitions as I6400, re-use the existing
i6400 map structures by renaming them to a slightly more generic
'i6x00_***_map'.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce the I6500 PRID & probe it just the same way as I6400. The MIPS
I6500 is the latest in Imagination Technologies' I-Class range of CPUs,
with a focus on scalability & heterogeneity. It introduces the notion of
multiple clusters to the MIPS Coherent Processing System, allowing for a
far higher total number of cores & threads in a system when compared
with its predecessors. Clusters don't need to be identical, and may
contain differing numbers of cores & IOCUs, or cores with differing
properties.
This patch alone adds the basic support for booting Linux on an I6500
CPU without support for any of its new functionality, for which support
will be introduced in further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16190/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
KProbes of __seccomp_filter() are not very useful without access to
the syscall arguments.
Do what x86 does, and populate a struct seccomp_data to be passed to
__secure_computing(). This allows samples/bpf/tracex5 to extract a
sensible trace.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16368/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The module load code has previously had entirely separate
implementations for rel & rela style relocs, which unnecessarily
duplicates a whole lot of code. Unify the implementations of both types
of reloc, sharing the bulk of the code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we hit an error whilst processing a reloc then we would return early
from apply_relocate & potentially not free entries in r_mips_hi16_list,
thereby leaking memory. Fix this by ensuring that we always run the code
to free r_mipps_hi16_list when errors occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 861667dc82 ("MIPS: Fix race condition in module relocation code.")
Fixes: 04211a5746 ("MIPS: Bail on unsupported module relocs")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The code handling the pop76 opcode (ie. bnezc & jialc instructions) in
__compute_return_epc_for_insn() needs to set the value of $31 in the
jialc case, which is encoded with rs = 0. However its check to
differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately
backwards, meaning that if we emulate a bnezc instruction we clobber $31
& if we emulate a jialc instruction it actually behaves like a jic
instruction.
Fix this by inverting the check of rs to match the way the instructions
are actually encoded.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Cc: stable <stable@vger.kernel.org> # v4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16178/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since introduction of tracing for init functions the in_kernel_space()
check is no longer correct, as it ignores the init sections. As a
result, when probes are inserted (and disabled) in the init functions,
a branch instruction is inserted instead of a nop, which is likely to
result in random crashes during boot.
Remove the MIPS-specific in_kernel_space() method and replace it with a
generic core_kernel_text() that also checks for init sections during
system boot stage.
Fixes: 42c269c88d ("ftrace: Allow for function tracing to record init functions on boot up")
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All performance counters on I6400 (odd and even) are capable of counting
any of the available events, so drop current logic of using the extra
bit to determine which counter to use.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 4e88a86213 ("MIPS: Add cases for CPU_I6400")
Fixes: fd716fca10 ("MIPS: perf: Fix I6400 event numbers")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15991/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This fixes a regression in commit 4d6501dce0 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit
4d6501dce0.
Fixes: 4d6501dce0 ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
While examining output from trial builds with -Wformat-security enabled,
many strings were found that should be defined as "const", or as a char
array instead of char pointer. This makes some static analysis easier,
by producing fewer false positives.
As these are all trivial changes, it seemed best to put them all in a
single patch rather than chopping them up per maintainer.
Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c]
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Daode Huang <huangdaode@hisilicon.com>
Cc: Qianqian Xie <xieqianqian@huawei.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: Jason Litzinger <jlitzingerdev@gmail.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bit searching functions accept "unsigned long" indices but
"nr_cpumask_bits" is "int" which is signed, so inevitable sign
extensions occur on x86_64. Those MOVSX are #1 MOVSX bloat by number of
uses across whole kernel.
Change "nr_cpumask_bits" to unsigned, this number can't be negative
after all. It allows to do implicit zero-extension on x86_64 without
MOVSX.
Change signed comparisons into unsigned comparisons where necessary.
Other uses looks fine because it is either argument passed to a function
or comparison is already unsigned.
Net win on allyesconfig type of kernel: ~2.8 KB (!)
add/remove: 0/0 grow/shrink: 8/725 up/down: 93/-2926 (-2833)
function old new delta
xen_exit_mmap 691 735 +44
qstat_read 426 440 +14
__cpufreq_cooling_register 1678 1687 +9
trace_rb_cpu_prepare 447 455 +8
vermagic 54 60 +6
nfp_driver_version 54 60 +6
rcu_torture_stats_print 1147 1151 +4
find_next_push_cpu 267 269 +2
xen_irq_resume 961 960 -1
...
init_vp_index 946 906 -40
od_set_powersave_bias 328 281 -47
power_cpu_exit 193 139 -54
arch_show_interrupts 3538 3484 -54
select_idle_sibling 1558 1471 -87
Total: Before=158358910, After=158356077, chg -0.00%
Same arguments apply to "nr_cpu_ids" but I haven't yet found enough
courage to delve into this issue (and proper fix may require new type
"cpu_t" which is whole separate story).
Link: http://lkml.kernel.org/r/20170309205322.GA1728@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
support; virtual interrupt controller performance improvements; support
for userspace virtual interrupt controller (slower, but necessary for
KVM on the weird Broadcom SoCs used by the Raspberry Pi 3)
* MIPS: basic support for hardware virtualization (ImgTec
P5600/P6600/I6400 and Cavium Octeon III)
* PPC: in-kernel acceleration for VFIO
* s390: support for guests without storage keys; adapter interruption
suppression
* x86: usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits; emulation of CPL3 CPUID faulting
* generic: first part of VCPU thread request API; kvm_stat improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZEHUkAAoJEL/70l94x66DBeYH/09wrpJ2FjU4Rqv7FxmqgWfH
9WGi4wvn/Z+XzQSyfMJiu2SfZVzU69/Y67OMHudy7vBT6knB+ziM7Ntoiu/hUfbG
0g5KsDX79FW15HuvuuGh9kSjUsj7qsQdyPZwP4FW/6ZoDArV9mibSvdjSmiUSMV/
2wxaoLzjoShdOuCe9EABaPhKK0XCrOYkygT6Paz1pItDxaSn8iW3ulaCuWMprUfG
Niq+dFemK464E4yn6HVD88xg5j2eUM6bfuXB3qR3eTR76mHLgtwejBzZdDjLG9fk
32PNYKhJNomBxHVqtksJ9/7cSR6iNPs7neQ1XHemKWTuYqwYQMlPj1NDy0aslQU=
=IsiZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- HYP mode stub supports kexec/kdump on 32-bit
- improved PMU support
- virtual interrupt controller performance improvements
- support for userspace virtual interrupt controller (slower, but
necessary for KVM on the weird Broadcom SoCs used by the Raspberry
Pi 3)
MIPS:
- basic support for hardware virtualization (ImgTec P5600/P6600/I6400
and Cavium Octeon III)
PPC:
- in-kernel acceleration for VFIO
s390:
- support for guests without storage keys
- adapter interruption suppression
x86:
- usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits
- emulation of CPL3 CPUID faulting
generic:
- first part of VCPU thread request API
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
kvm: nVMX: Don't validate disabled secondary controls
KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
Revert "KVM: Support vCPU-based gfn->hva cache"
tools/kvm: fix top level makefile
KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
KVM: Documentation: remove VM mmap documentation
kvm: nVMX: Remove superfluous VMX instruction fault checks
KVM: x86: fix emulation of RSM and IRET instructions
KVM: mark requests that need synchronization
KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
KVM: add explicit barrier to kvm_vcpu_kick
KVM: perform a wake_up in kvm_make_all_cpus_request
KVM: mark requests that do not need a wakeup
KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
KVM: x86: always use kvm_make_request instead of set_bit
KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
s390: kvm: Cpu model support for msa6, msa7 and msa8
KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
kvm: better MWAIT emulation for guests
KVM: x86: virtualize cpuid faulting
...
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- unwinder fixes and enhancements
- improve ftrace interaction with the unwinder
- optimize the code footprint of WARN() and related debugging
constructs
- ... plus misc updates, cleanups and fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/unwind: Dump all stacks in unwind_dump()
x86/unwind: Silence more entry-code related warnings
x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
x86/unwind: Remove unused 'sp' parameter in unwind_dump()
x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
x86/unwind: Ensure stack pointer is aligned
debug: Avoid setting BUGFLAG_WARNING twice
x86/unwind: Silence entry-related warnings
x86/unwind: Read stack return address in update_stack_state()
x86/unwind: Move common code into update_stack_state()
debug: Fix __bug_table[] in arch linker scripts
debug: Add _ONCE() logic to report_bug()
x86/debug: Define BUG() again for !CONFIG_BUG
x86/debug: Implement __WARN() using UD0
x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
x86/ftrace: Clean up ftrace_regs_caller
x86/ftrace: Add stack frame pointer to ftrace_caller
x86/ftrace: Move the ftrace specific code out of entry_32.S
...
Pull timer updates from Thomas Gleixner:
"The timer departement delivers:
- more year 2038 rework
- a massive rework of the arm achitected timer
- preparatory patches to allow NTP correction of clock event devices
to avoid early expiry
- the usual pile of fixes and enhancements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
arm64/arch_timer: Mark errata handlers as __maybe_unused
Clocksource/mips-gic: Remove redundant non devicetree init
MIPS/Malta: Probe gic-timer via devicetree
clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource: arm_arch_timer: simplify ACPI support code.
acpi/arm64: Add GTDT table parse driver
clocksource: arm_arch_timer: split MMIO timer probing.
clocksource: arm_arch_timer: add structs to describe MMIO timer
clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
clocksource: arm_arch_timer: refactor arch_timer_needs_probing
clocksource: arm_arch_timer: split dt-only rate handling
x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
um/time: Set ->min_delta_ticks and ->max_delta_ticks
tile/time: Set ->min_delta_ticks and ->max_delta_ticks
score/time: Set ->min_delta_ticks and ->max_delta_ticks
...
Pull uaccess unification updates from Al Viro:
"This is the uaccess unification pile. It's _not_ the end of uaccess
work, but the next batch of that will go into the next cycle. This one
mostly takes copy_from_user() and friends out of arch/* and gets the
zero-padding behaviour in sync for all architectures.
Dealing with the nocache/writethrough mess is for the next cycle;
fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
sold on access_ok() in there, BTW; just not in this pile), same for
reducing __copy_... callsites, strn*... stuff, etc. - there will be a
pile about as large as this one in the next merge window.
This one sat in -next for weeks. -3KLoC"
* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
HAVE_ARCH_HARDENED_USERCOPY is unconditional now
CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
m32r: switch to RAW_COPY_USER
hexagon: switch to RAW_COPY_USER
microblaze: switch to RAW_COPY_USER
get rid of padding, switch to RAW_COPY_USER
ia64: get rid of copy_in_user()
ia64: sanitize __access_ok()
ia64: get rid of 'segment' argument of __do_{get,put}_user()
ia64: get rid of 'segment' argument of __{get,put}_user_check()
ia64: add extable.h
powerpc: get rid of zeroing, switch to RAW_COPY_USER
esas2r: don't open-code memdup_user()
alpha: fix stack smashing in old_adjtimex(2)
don't open-code kernel_setsockopt()
mips: switch to RAW_COPY_USER
mips: get rid of tail-zeroing in primitives
mips: make copy_from_user() zero tail explicitly
mips: clean and reorder the forest of macros...
mips: consolidate __invoke_... wrappers
...
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.
Make the MIPS arch's clockevent drivers initialize these fields properly.
This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from these
drivers.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: John Crispin <john@phrozen.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Commit fbde2d7d82 ("MIPS: Add generic SMP IPI support") introduced a
sanity check that an IPI IRQ domain can be found during boot, in order
to ensure that IPIs are able to be set up in systems using such domains.
However it was added at a point where systems may have used an IPI IRQ
domain in some situations but not others, and we could not know which
were the case until runtime, so commit 578bffc82e ("MIPS: Don't BUG_ON
when no IPI domain is found") made that check simply skip IPI init if no
domain were found in order to fix the boot for systems such as QEMU
Malta.
We now use IPI IRQ domains for the MIPS CPU interrupt controller, which
means systems which make use of IPI IRQ domains will always do so when
running on multiple CPUs. As a result we now strengthen the sanity check
to ensure that an IPI IRQ domain is found when multiple CPUs are present
in the system.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the smp-mt IPI code that supported single-core multithreaded
systems and instead make use of the IPI IRQ domain support provided by
the MIPS CPU interrupt controller driver. This removes some less than
nice code, the horrible split between arch & board code and the
duplication that led to within board code.
The lantiq portion of this patch has only been compile tested. Malta has
been tested & is functional.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15837/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
KGDB is a kernel debug stub and it can't be used to debug userland as it
can only safely access kernel memory.
On MIPS however KGDB has always got the register state of sleeping
processes from the userland register context at the beginning of the
kernel stack. This is meaningless for kernel threads (which never enter
userland), and for user threads it prevents the user seeing what it is
doing while in the kernel:
(gdb) info threads
Id Target Id Frame
...
3 Thread 2 (kthreadd) 0x0000000000000000 in ?? ()
2 Thread 1 (init) 0x000000007705c4b4 in ?? ()
1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201
Get the register state instead from the (partial) kernel register
context stored in the task's thread_struct for resume() to restore. All
threads now correctly appear to be in context_switch():
(gdb) info threads
Id Target Id Frame
...
3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201
Call clobbered registers which aren't saved and exception registers
(BadVAddr & Cause) which can't be easily determined without stack
unwinding are reported as 0. The PC is taken from the return address,
such that the state presented matches that found immediately after
returning from resume().
Fixes: 8854700115 ("[MIPS] kgdb: add arch support for the kernel's kgdb core")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15829/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Turning on DEBUG in smp-cps.c, or compiling the kernel with
CONFIG_DYNAMIC_DEBUG enabled results the build error:
arch/mips/kernel/smp-cps.c: In function 'play_dead':
./include/linux/dynamic_debug.h:126:3: error: 'core' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
Fix this by always initialising the variable.
Fixes: 0d2808f338 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15848/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
After the split of linux/sched.h, KASLR stopped building.
Fix this by including the correct header file for init_thread_union
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15849/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch_check_elf contains a usage of current_cpu_data that will call
smp_processor_id() with preemption enabled and therefore triggers a
"BUG: using smp_processor_id() in preemptible" warning when an fpxx
executable is loaded.
As a follow-up to commit b244614a60 ("MIPS: Avoid a BUG warning during
prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by
using raw_current_cpu_data instead. The rationale quoted from the previous
commit:
"It is assumed throughout the kernel that if any CPU has an FPU, then
all CPUs would have an FPU as well, so it is safe to perform the check
with preemption enabled - change the code to use raw_ variant of the
check to avoid the warning."
Fixes: 46490b5725 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
CC: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15951/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This the mips version of commit c1bd55f922 ("x86: opt into
HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit").
Simply use the tls system call argument instead of extracting the tls
argument by magic from the pt_regs structure.
See commit 3033f14ab7 ("clone: support passing tls argument via C
rather than pt_regs magic") for more background.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15855/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
