Commit Graph

581 Commits

Author SHA1 Message Date
Sudeep Holla
0d3f2c92e0 irqchip/gic: Remove redundant gic_set_irqchip_flags
Now that the GIC chip implementation enables IRQCHIP_SKIP_SET_WAKE and
IRQCHIP_MASK_ON_SUSPEND by default, the platforms requiring them need
not override the irqchip flags as before.

This patch removes all the users of gic_set_irqchip_flags and the
function itself.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1436971109-20189-2-git-send-email-sudeep.holla@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-27 08:09:38 +02:00
Sudeep Holla
aec89ef72b irqchip/gic: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
The GIC controller doesn't provides any facility to configure the wakeup
sources. For the same reason, GIC chip implementation can't provide
irq_set_wake functionality, but that results in the irqchip core
preventing the systems from entering sleep states like "suspend to RAM".

The GICv1/v2 controllers support wakeup events. They signal these wakeup
events even when CPU interface is disabled which means the wakeup
outputs are always enabled with the required logic in always-on domain.
An implementation can powerdown the GIC completely, but then the wake-up
must be relayed to some control logic within the power controller that
acts as wake-up interrupt controller.

Setting the IRQCHIP_SKIP_SET_WAKE flags will ensure that the interrupts
from GIC can work as wakeup interrupts and resume from suspend-to-{idle,
ram}. The wakeup interrupt sources need to use enable_irq_wake() and the
irqchip core will then set the IRQD_WAKEUP_STATE flag.

Also it's always safer to mask all the non wakeup interrupts are masked
at the chip level when suspending. The irqchip infrastructure can handle
masking of those interrupts at the chip level. The chip implementation
just have to indicate that with IRQCHIP_MASK_ON_SUSPEND.

This patch enables IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so
that the irqchip core allows and handles the power managemant wake up
modes.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1436971109-20189-1-git-send-email-sudeep.holla@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-27 08:09:37 +02:00
Wang Long
faca10b9e6 drivers/irqchip: Replace pr_warning by pr_warn
Update the last pr_warning callsite in drivers/irqchip.

Signed-off-by: Wang Long <long.wanglong@huawei.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <wanglong@laoqinren.net>
Cc: <peifeiyue@huawei.com>
Cc: <jason@lakedaemon.net>
Cc: <kgene@kernel.org>
Cc: <k.kozlowski@samsung.com>
Link: http://lkml.kernel.org/r/1437466261-147373-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:42 +02:00
Felipe Balbi
6ed3464897 irqchip: omap-intc: Improve IRQ handler
As it turns out the current IRQ number will *always* be available from
SIR register which renders the reads of PENDING registers as plain
unnecessary overhead.

In order to catch any situation where SIR reads as zero, we're adding
a WARN() to turn it into a very verbose error and users actually
report it.

With this patch average running time of omap_intc_handle_irq() reduced
from about 28.5us to 19.8us as measured by the kernel function
profiler.

Tested with BeagleBoneBlack Rev A5C.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: Linux ARM Kernel Mailing List <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/20150720204910.GH5394@saruman.tx.rr.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:42 +02:00
Magnus Damm
e10fc03c4f irqchip/renesas-irqc: Make use of irq_find_mapping()
Instead of locally caching the virq as domain_irq simply rely on the
IRQ domain code and irq_find_mapping().  This reduces the delta
between the IRQC driver and the generic chip implementation.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: jason@lakedaemon.net
Cc: geert+renesas@glider.be
Cc: horms@verge.net.au
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150720100635.2552.20906.sendpatchset@little-apple
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20 13:19:00 +02:00
Magnus Damm
7d153751c7 irqchip/renesas-irqc: Use linear IRQ domain
Use linear IRQ domain instead of irq_domain_add_simple() that also
handles non-DT cases. This reduces the delta between the IRQC code and
the generic chip implementation.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: jason@lakedaemon.net
Cc: geert+renesas@glider.be
Cc: horms@verge.net.au
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150720100625.2552.63939.sendpatchset@little-apple
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20 13:19:00 +02:00
Magnus Damm
35c3f67f11 irqchip/renesas-irqc: Get rid of IRQF_VALID
IRQF_VALID is not needed on ARM anymore, so get rid of it.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: jason@lakedaemon.net
Cc: geert+renesas@glider.be
Cc: horms@verge.net.au
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150720100614.2552.86867.sendpatchset@little-apple
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20 13:18:59 +02:00
Thomas Gleixner
9fc0fd6b05 irqchip/spear-shirq: Prepare shirq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:23 +02:00
Thomas Gleixner
71093eb2cf irqchip/versatile-fpga: Prepare fpga_irq_handle for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:23 +02:00
Thomas Gleixner
e616e9af87 irqchip/tb10x: Prepare tb10x_irq_cascade for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
4df18a668c irqchip/s3c24xx: Prepare s3c_irq_demux for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
14873aa1d1 irqchip/mmp: Prepare icu_mux_irq_demux for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
283653a368 irqchip/keystone: Prepare keystone_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
99705f995a irqchip/imgpdc: Prepare pdc_intc_perip_isr for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
00db2ae52a irqchip/brcmstb-l2: Prepare brcmstb_l2_intc_irq_handle for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
77b563ed06 irqchip/exynos: Prepare combiner_handle_cascade_irq for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.
    
Search and update was done with coccinelle and the invaluable help of
Julia Lawall.
    
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
2015-07-16 22:53:22 +02:00
Thomas Gleixner
a595fc51a3 irqchip/mips-gic: Use irq_set_chip_handler_name_locked
Use irq_set_handler_name_locked() as it avoids a redundant lookup of
the irq descriptor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-12 17:31:56 +02:00
Thomas Gleixner
0a2b64979a irqchip/metag-ext: Use irq_set_chip_handler_name_locked()
Hand in irq_data and avoid the redundant lookup of irq_desc.

Originally-from: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-12 09:39:11 +02:00
Thomas Gleixner
d2aa914d27 irqchip/vt8500: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-12 09:37:47 +02:00
Jiang Liu
5b29264c65 irqchip: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://lkml.kernel.org/r/1433391238-19471-11-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11 23:14:27 +02:00
Jiang Liu
72f86db4dd irqchip/mips-gic: Use access helper irq_data_get_affinity_mask()
Use access helper irq_data_get_affinity_mask() to hide implementation
details of struct irq_desc.

[ tglx: Verified with coccinelle ]

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1433145945-789-30-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11 23:14:27 +02:00
Thomas Gleixner
9f2135419f irqchip/vic: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:27 +02:00
Thomas Gleixner
fcd3c5bee1 irqchip/versatile: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:26 +02:00
Thomas Gleixner
22890b0dbe irqchip/tb10x: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:26 +02:00
Thomas Gleixner
3200a71207 irqchip/sunxi-nmi: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
2015-07-11 23:14:26 +02:00
Thomas Gleixner
07d22c23d6 irqchip/orion: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:26 +02:00
Thomas Gleixner
832b404ea0 irqchip/metag: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-metag@vger.kernel.org
2015-07-11 23:14:26 +02:00
Thomas Gleixner
bc4d2c074a irqchip/imgpdc: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:26 +02:00
Thomas Gleixner
4d83fcf8d6 irqchip/gic: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
2015-07-11 23:14:26 +02:00
Thomas Gleixner
f286c17359 irqchip/brcmstb-l2: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
2015-07-11 23:14:25 +02:00
Thomas Gleixner
99e32ab173 irqchip/bcm7120-l2: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
2015-07-11 23:14:25 +02:00
Thomas Gleixner
3a7946eed8 irqchip/bcm7038-l1: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
2015-07-11 23:14:25 +02:00
Thomas Gleixner
741ff96613 irqchip/exynos-combiner: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
|
-irq_set_handler_data(E1, E2);
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_handler_data(E1, E2) != 0)
-   BUG();
...
|
-irq_set_handler_data(E1, E2);
...
)
-irq_set_chained_handler(E1, E3);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
2015-07-11 23:14:25 +02:00
Joel Porquet
41a83e06e2 irqchip: Prepare for local stub header removal
The IRQCHIP_DECLARE macro moved to to 'include/linux/irqchip.h', so
the local irqchip.h became an empty shell, which solely includes
include/linux/irqchip.h

Include the global header in all irqchip drivers instead of the local
header, so we can remove it.

Signed-off-by: Joel Porquet <joel@porquet.org>
Cc: vgupta@synopsys.com
Cc: monstr@monstr.eu
Cc: ralf@linux-mips.org
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1882096.X39jVG8e0D@joel-zenbook
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11 23:14:23 +02:00
Thomas Gleixner
d452bca82d irqchip/sirfsoc: Fix generic chip allocation wreckage
irq_alloc_domain_generic_chips() can only be called once for an
irqdomain. The sirfsoc init calls it twice and because the return
value is not checked it does not notice the wreckage.

The code works by chance because the first call already allocates two
chips and therefor the second call to sirfsoc_alloc_gc() operates on
the proper generic chip instance.

Use a single call and setup the two chips in the obvious correct way.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Barry Song <baohua@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/20150706101543.470696950@linutronix.de
2015-07-11 23:14:23 +02:00
Thomas Gleixner
b66231183a irqchip/dw-apb-ictl: Fix generic domain chip wreckage
The num_ct argument of irq_alloc_domain_generic_chips() tells the core
code how many chip types (for different control flows,
e.g. edge/level) should be allocated. It does not control how many
generic chip instances are created because that's determined from the
irq domain size and the number of interrupts per chip.

The dw-apb init abuses the num_ct argument for allocating one or two
chip types depending on the number of interrupts. That's completely
wrong because the alternate type is never used.

This code was obviously never tested on a system which has more than
32 interrupts as that would have never worked due to the unitialized
second generic chip instance.

Hand in the proper num_ct=1 and fixup the chip initialization along
with the interrupt handler.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/20150706101543.373582262@linutronix.de
2015-07-11 23:14:23 +02:00
Linus Torvalds
14a6f1989d Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq update from Thomas Gleixner:
 "The last update for 4.2 is just moving a macro from a local header to
  the global one, so it can be used in architecture code as well.

  Cleanup of the now empty local header is 4.3 material"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h
2015-07-04 09:22:51 -07:00
Joel Porquet
91e20b5040 irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h
At the moment the IRQCHIP_DECLARE macro is only declared locally in
drivers/irqchip/irqchip.h. It prevents from using it directly in arch/*
directories whenever irqchip drivers only exist there, which happens in a few
cases (e.g. arc, arm, microblaze and mips).

This patch makes the macro to be globally defined, i.e. in
include/linux/irqchip.h, and thus usable for arch-specific declarations of
irqchip drivers. In this way, it is very similar to what clocksource does (ie
CLOCKSOURCE_OF_DECLARE is defined in include/linux/clocksource.h).

For now, this patch only moves the declaration of the macro
IRQCHIP_DECLARE to the global header 'include/linux/irqchip.h' and make
'drivers/irqchip/irqchip.h' include 'include/linux/irqchip.h'. Later, other
patches will get rid of 'drivers/irqchip/irqchip.h' and modify all the impacted
irqchip drivers.

Signed-off-by: Joel Porquet <joel@porquet.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1435865565-14114-1-git-send-email-joel@porquet.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-02 22:34:38 +02:00
Linus Torvalds
78c10e556e Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...
2015-06-27 12:44:34 -07:00
Linus Torvalds
e8a0b37d28 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...
2015-06-26 12:20:00 -07:00
Linus Torvalds
55a7d4b85c h8300 pull request for 4.2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVi5eKAAoJEEdC8EELKDmcZWoQANh4UC+JGcP3XJ+AWyJpX1Rg
 VQMmSAiF/QZr3ty9sbU/6v3pNK5B1s2etY7lWzzCsp7GMhYln83OjwJn8pkcAvRk
 4GoEio4Yp0RMTOYk1nvKEhUGnxLwpma+xX5ulZkSTaYhZl++eX8HUGmfHhpxMcK9
 Unz1Y7vRIRaNUIawZECijxVj9yvteczwdwjWBp7AH2HChZ3LWJGo2xikd1Jwizx8
 zPv+mdaHkV9gbORS53hvqVaXXjiZVmLKQEz6LlWHubuWysf98YcBzNAhSKpjQzqW
 cwjXyw3MNc5fPjliwUstN/9ImWFdRJgwmdQ0DJ1v6kWPbHMQ4lCxeasy02YJ7l0R
 TWUOTyTSGT7Hd8CRrryo7akQ3nt8g7fZAR6nVujexbjkSt9ZbBSplAikiSKRbjU2
 7jkolYSM1ADqEeBBwcDnG2O45Pv8PxKGa4/8MV2hkcvrkkJp2lW+KybY0qp19MWb
 Dw09QYzFb5u6sKqD6AsjJQ6GKxLxNn3yBKk16V1yF0kAvQRdIj0XPgtMnGUgdkAw
 QA1nRQM25CLyOtH9SVWogRLof8UTZUlPtUCxKRww2//pAVkKGHg/afnnkqN933Yc
 Kv7/Mz2es6Km+D4qkQetnXF/IOxWfVUvnQa23Oe7gmkg4KNNrGO6bo7iQXDjDrHa
 LuNfJZRG5DzDjbdcp2t3
 =fE8E
 -----END PGP SIGNATURE-----

Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato.

We dropped arch/h8300 two years ago as stale and old, this is a new and
more modern rewritten arch support for the same architecture.

* tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits)
  h8300: fix typo.
  h8300: Always build dtb
  h8300: Remove ARCH_WANT_IPC_PARSE_VERSION
  sh-sci: Get register size from platform device
  clk: h8300: fix error handling in h8s2678_pll_clk_setup()
  h8300: Symbol name fix
  h8300: devicetree source
  h8300: configs
  h8300: IRQ chip driver
  h8300: clocksource
  h8300: clock driver
  h8300: Build scripts
  h8300: library functions
  h8300: Memory management
  h8300: miscellaneous functions
  h8300: process helpers
  h8300: compressed image support
  h8300: Low level entry
  h8300: kernel startup
  h8300: Interrupt and exceptions
  ...
2015-06-25 13:07:24 -07:00
Yoshinori Sato
8a7644821a h8300: IRQ chip driver
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-06-23 13:35:56 +09:00
Linus Torvalds
407a2c7205 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - plug a potential race related to chained interrupt handlers

   - core updates which address the needs of the x86 irqdomain conversion

   - new irqchip callback to support affinity settings for VCPUs

   - the usual pile of updates to interrupt chip drivers

   - a few helper functions to allow further cleanups and
     simplifications

  I have a largish pile of coccinelle scripted/verified cleanups and
  simplifications pending on top of that, but I prefer to send that
  towards the end of the merge window when the arch/driver changes have
  hit your tree to avoid API change wreckage as far as possible"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  genirq: Remove bogus restriction in irq_move_mask_irq()
  irqchip: atmel-aic5: Add sama5d2 support
  irq: spear-shirq: Fix race in installing chained IRQ handler
  irq: irq-keystone: Fix race in installing chained IRQ handler
  gpio: gpio-tegra: Fix race in installing chained IRQ handler
  gpio: gpio-mxs: Fix race in installing chained IRQ handler
  gpio: gpio-mxc: Fix race in installing chained IRQ handler
  ARM: gemini: Fix race in installing GPIO chained IRQ handler
  GPU: ipu: Fix race in installing IPU chained IRQ handler
  ARM: sa1100: convert SA11x0 related code to use new chained handler helper
  irq: Add irq_set_chained_handler_and_data()
  irqchip: exynos-combiner: Save IRQ enable set on suspend
  genirq: Introduce helper function irq_data_get_affinity_mask()
  genirq: Introduce helper function irq_data_get_node()
  genirq: Introduce struct irq_common_data to host shared irq data
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED
  irqchip: renesas: intc-irqpin: Improve binding documentation
  genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip
  ...
2015-06-22 19:42:56 -07:00
Paul Burton
44e08e7099 MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchip
Move the driver for Ingenic SoC interrupt controllers into
drivers/irqchip where it belongs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10147/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:10 +02:00
Paul Burton
892b8cf06d IRQCHIP: irq_cpu: declare irqchip table entry
Allow the MIPS CPU interrupt controller to be probed from DT using the
generic __irqchip_of_table for platforms which use irqchip_init. This
will avoid such platforms needing to duplicate the compatible string &
init function pointer.

[ralf@linux-mips.org: Resolved conflict due the preceeding commit that
moves irq-cpu.c.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Cc: Felix Fietkau <nbd@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10131/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:52 +02:00
Ralf Baechle
67e38cf293 MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.
While at it, rename it because in drivers/irqchip no longer every CPU is
a MIPS.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:50 +02:00
Nicolas Ferre
62a993df31 irqchip: atmel-aic5: Add sama5d2 support
Add sama5d2 support to irq-atmel-aic5.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/1434632855-27272-1-git-send-email-nicolas.ferre@atmel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 15:29:52 +02:00
Russell King
2aedd0fdc6 irq: spear-shirq: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z0X-0002T1-6U@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 14:03:09 +02:00
Russell King
9414b6e2d5 irq: irq-keystone: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z0S-0002Ss-1V@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 14:03:08 +02:00
Javier Martinez Canillas
6fd4899a54 irqchip: exynos-combiner: Save IRQ enable set on suspend
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during a Suspend-to-RAM. This means that if a
IRQ is used as a source, the interrupts for the devices are disabled
when the system is resumed from a sleep state so are not triggered.

Save the interrupt enable set register for each combiner group and
restore it after resume to make sure that the interrupts are enabled.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Chanho Park <parkch98@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: http://lkml.kernel.org/r/1434087795-13990-1-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-16 11:34:41 +02:00