Commit Graph

255365 Commits

Author SHA1 Message Date
Hans de Goede
51886df0ca [media] pwc: Enable power-management by default on tested models
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:37 -03:00
Hans de Goede
4bf7c61c8a [media] pwc: Add a bunch of pwc custom API to feature-removal-schedule.txt
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:37 -03:00
Hans de Goede
294e289602 [media] pwc: Add v4l2 controls for pan/tilt on Logitech QuickCam Orbit/Sphere
This makes the API for this:
1) v4l2 spec compliant
2) match that of the UVC Logitech QuickCam Sphere models

For now this operates in parellel to the sysfs interface for this, but the
intend is to deprecate the sysfs interface and remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:45 -03:00
Hans de Goede
c11271349a [media] pwc: Allow dqbuf / read to complete while waiting for controls
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:45 -03:00
Hans de Goede
6c9cac89c0 [media] pwc: Replace control code with v4l2-ctrls framework
Also remove all the converting from native range to 0-65535 and back
that was going on. This is no longer needed now that we no longer support
v4l1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:45 -03:00
Hans de Goede
04613c5e60 [media] pwc: properly allocate dma-able memory for ISO buffers
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:44 -03:00
Hans de Goede
4fba471e40 [media] pwc: Allow multiple opens
Allow multiple opens of the /dev/video node so that control panel apps
can be open to-gether with streaming apps.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:44 -03:00
Hans de Goede
6eba93573d [media] pwc: Move various initialization to driver load and / or stream start
Doing a bunch of initialization every time /dev/video is opened, and thus
for example when the udev rules probe for capabilities makes no sense,
do it at driver load, resp. stream start instead.

This is a preparation patch for allowing multiple opens of the /dev/video
node.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:44 -03:00
Hans de Goede
3b4d0ec791 [media] pwc: Make power-saving a per device option
as vcinterface must be set before calling pwc_camera_power()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:44 -03:00
Hans de Goede
52a9254750 [media] pwc: Remove some unused PWC_INT_PIPE left overs
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:43 -03:00
Hans de Goede
b824bb4b12 [media] pwc: Get rid of error_status and unplugged variables
Having 2 ways of tracking disconnection is too much, remove both and
instead simply set pdev->udev to NULL on disconnect. Also check for
pdev->udev being NULL in all possible entry paths.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:43 -03:00
Hans de Goede
1a4ede65f3 [media] pwc: Fix non CodingStyle compliant 3 space indent in pwc.h
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:43 -03:00
Hans de Goede
885fe18f55 [media] pwc: Replace private buffer management code with videobuf2
Looking at the pwc buffer management code has made it clear to me it needed
some serious fixing. Not only was there a ton of code duplication even
internally to pwc (read and mmap wait for frame code was duplicated), the
code also was outright buggy. With the worst offender being dqbuf, which
just round robin returned all the mmap buffers, without paying any attention
to them being queued by the app with qbuf or not. And qbuf itself was a noop.

So I set out to fix this and already had some cleanups in place when
I read Jonathan Corbet's lwn article on videobuf2, this inspired me to just
rip out the buffer management code and replace it with videobuf2, greatly
reducing the amount of code, and fixing all bugs in one go:

Many thanks to Jonathan for the timely article on this !

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:43 -03:00
Hans de Goede
5f40d91552 [media] pwc: remove __cplusplus guards from private header
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:43 -03:00
Hans de Goede
c246412117 [media] pwc: Remove a bunch of bogus sanity checks / don't return EFAULT wrongly
The chances if any of these becoming NULL magically are 0% And if they
do become NULL oopsing is the right thing to do (so that the user logs a
bug with the kernel rather then with whatever app he was using).

Returning EFAULT to userspace should only be done when userspace supplies
a bad address, not on driver bugs / hw issues, so in the few cases where the
check is not bogus return something else.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:42 -03:00
Hans de Goede
e7d712cc99 [media] gspca: s/strncpy/strlcpy/
Just like in userspace strncpy does not guarantee 0 termination. Use strlcpy
instead which does guarantee 0 termination.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:42 -03:00
Hans de Goede
2f2ea0f3f2 [media] gspca_sunplus: Fix streaming on logitech quicksmart 420
Don't issue a stream stop to the camera at the end of sd_start, this fixes
streaming with this particular model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:42 -03:00
Hans de Goede
c27cea03e7 [media] gspca: Add new se401 camera driver
Based on the old v4l1 camera by Jeroen Vreeken driver which recently got
removed from the kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:41 -03:00
Hans de Goede
fa4376d28e [media] gspca: reset image_len to 0 on LAST_PACKET when discarding frame
Reset image and image_len to NULL/0 on LAST_PACKET when we're in discard
frame mode, just like we do when not discarding the current frame.

The new se401 driver uses image_len for SOF/EOF detection and thus depends on
this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:39 -03:00
Hans de Goede
21144ea601 [media] videodev2.h Add SE401 compressed RGB format
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:39 -03:00
Jean-François Moine
0fdee88e54 [media] gspca - ov519: Fix a LED inversion
In the webcam 041e:405f, the LED is inverted.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:39 -03:00
Jean-François Moine
b877a9a7fb [media] gspca - ov519: Fix sensor detection problems
The sensor of some webcams could not be detected due to timing problems
in sensor register reading. This patch adds bridge register readings
before sensor register reading.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Stefan Richter
686a9488cd [media] firedtv: change some -EFAULT returns to more fitting error codes
Mauro Carvalho Chehab wrote:
> I'm validating if all drivers are behaving equally with respect to the
> error codes returned to userspace, and double-checking with the API.
>
> On almost all places, -EFAULT code is used only to indicate when
> copy_from_user/copy_to_user fails. However, firedtv uses a lot of
> -EFAULT, where it seems to me that other error codes should be used
> instead (like -EIO for bus transfer errors and -EINVAL/-ERANGE for
> invalid/out of range parameters).

This concerns only the CI (CAM) related code of firedtv of which I know
little.  Let's just pass through the error returns of lower level I/O
code where applicable, and -EACCES (permission denied) when a seemingly
valid but negative FCP response or an unknown-to-firedtv CA message is
received.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Henrik Kurelid <henrik@kurelid.se>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Mauro Carvalho Chehab
7a286cc188 [media] return -ENOTTY for unsupported ioctl's at legacy drivers
Those drivers are not relying at the V4L2 core to handle the ioctl's.
So, we need to manually patch them every time a change goes to the
core.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-By: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Mauro Carvalho Chehab
9190d191b1 [media] v4l2 core: return -ENOTTY if an ioctl doesn't exist
Currently, -EINVAL is used to return either when an IOCTL is not
implemented, or if the ioctl was not implemented.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Mauro Carvalho Chehab
c28f53f6cd [media] DocBook/dvb: Use generic descriptions for the video API
While here, removes the bogus EINTERNAL error codes.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Mauro Carvalho Chehab
66b30b5d51 [media] DocBook/dvb: Use generic descriptions for the frontend API
Move generic stuff into gen-errors.xml, and remove them from
DVB API. While here, removes two bogus error codes that aren't
supported or used on Linux: EINTERNAL and ENOSIGNAL.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:38 -03:00
Mauro Carvalho Chehab
16d6c0b02c [media] dvb-bt8xx: Don't return -EFAULT when a device is not found
When a device (or their PCI structs) are not found, the error should
be -ENODEV. -EFAULT is reserved for errors while copying arguments
from/to userspace.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:37 -03:00
Mauro Carvalho Chehab
c1798c90ad [media] DocBook/demux.xml: Remove generic errors
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:37 -03:00
Mauro Carvalho Chehab
b424f60c5b [media] DocBook/audio.xml: Remove generic errors
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.
Also remove the EINTERNAL error code, as no DVB driver returns
it, and this error code is not defined on POSIX or on Linux.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:37 -03:00
Mauro Carvalho Chehab
3de530f805 [media] DVB: Point to the generic error chapter
Just like the V4L, MC and LIRC API's, point to the generic error
chapter for ioctl's. This will allow moving generic error codes
to just one place inside all media API's.

A latter patch will remove the generic errors from each specific
ioctl.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:37 -03:00
Mauro Carvalho Chehab
7464aa50c6 [media] nxt6000: i2c bus error should return -EIO
data from/to userspace. Don't mix it with I2C bus error (-EIO).

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:37 -03:00
Mauro Carvalho Chehab
d316b5fba3 [media] siano: bad parameter is -EINVAL and not -EFAULT
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:36 -03:00
Mauro Carvalho Chehab
c55d6f8270 [media] DocBook: Add return error codes to LIRC ioctl session
Add a reference for the generic error code chapter to LIRC ioctl
description.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:36 -03:00
Mauro Carvalho Chehab
10dc380f79 [media] DocBook: Add an error code session for LIRC interface
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:36 -03:00
Mauro Carvalho Chehab
4c14e4a93f [media] DocBook: Remove V4L generic error description for ioctl()
V4L ioctl function descripton also has a generic error chapter.
Remove it, as it is now obsoleted by a general, multi-API generic
error descriptions.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:36 -03:00
Mauro Carvalho Chehab
9e1d50756b [media] DocBook/media-ioc-setup-link.xml: Remove EBUSY
The EBUSY is already described as a generic error condition, with a
similar text.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Mauro Carvalho Chehab
dfcf4f9d97 [media] DocBook: Use the generic error code page also for MC API
Instead of having their own generic error codes at the MC API, move
its section to the generic one and be sure that all media ioctl's
will point to it.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Mauro Carvalho Chehab
43c1daa47d [media] DocBook: Use the generic ioctl error codes for all V4L ioctl's
Be sure that all VIDIOC_* ioctl are using the return error macro, and
aren't specifying generic error codes internally.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Mauro Carvalho Chehab
6d1724925d [media] DocBook: Add a chapter to describe media errors
There are several errors reported by V4L that aren't described.
They can occur on almost all ioctl's. Instead of adding them
into each ioctl, create a new chapter.

For V4L, the new chapter will automatically be listed on all
places, as there's a macro used everywhere there.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Jonathan Corbet
28720944d8 [media] marvell-cam: use S/G DMA by default
Scatter/gather DMA mode works nicely on this platform and is clearly the
best way of doing things.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Jonathan Corbet
cbc4f3a277 [media] marvell-cam: Working s/g DMA
The core Marvell camera driver can now do scatter/gather DMA on controllers
which support that functionality.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:35 -03:00
Hans Verkuil
60c0732244 [media] v4l2-ctrls.c: add support for V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK
Normally no control events will go to the filehandle that called the
VIDIOC_S_CTRL/VIDIOC_S_EXT_CTRLS ioctls. This is to prevent a feedback
loop.

This can now be overridden by setting the new V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK
flag.

Based on suggestions from Mauro Carvalho Chehab <mchehab@redhat.com> and
Laurent Pinchart <laurent.pinchart@ideasonboard.com>.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:34 -03:00
Hans Verkuil
3ad57c3384 [media] v4l2-event.h: add overview documentation to the header
It's getting confusing who is linking to what, so add an overview at
the start of the header.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:34 -03:00
Hans Verkuil
3f66f0ed31 [media] v4l2-ctrls/v4l2-events: small coding style cleanups
Thanks to Laurent Pinchart <laurent.pinchart@ideasonboard.com>.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:34 -03:00
Hans Verkuil
e969084030 [media] DocBook: update V4L Event Interface section
Starting with v3.1 the V4L2 API provides certain guarantees with respect to
events. Document these.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:34 -03:00
Hans Verkuil
1de7310ac9 [media] v4l2-framework.txt: update v4l2_event section
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:33 -03:00
Hans Verkuil
98019f5e88 [media] v4l2-framework.txt: updated v4l2_fh_init documentation
v4l2_fh_init now returns void instead of int, updated the doc.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:33 -03:00
Hans Verkuil
71c6c4c918 [media] v4l2-ctrls: v4l2_ctrl_handler_setup code simplification
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:32 -03:00
Hans Verkuil
e64025850d [media] v4l2-ctrls: split try_or_set_ext_ctrls()
Split try_or_set_ext_ctrls() into a validate_ctrls() part ('Phase 1')
and merge the second part ('Phase 2') into try_set_ext_ctrls().

This makes a lot more sense and it also does the validation before
trying to try/set the controls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:32 -03:00