Alexei Starovoitov says:
====================
pull-request: bpf 2018-12-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix bpf uapi pointers for 32-bit architectures, from Daniel.
2) improve verifer ability to handle progs with a lot of branches, from Alexei.
3) strict btf checks, from Yonghong.
4) bpf_sk_lookup api cleanup, from Joe.
5) other misc fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Missing reads{x}()/writes{x}() getting in the way of some drivers [Jose Abreu]
- Builds defaulting to ARCv2 ISA based configsa [Kevin Hilman]
- Miscll fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DXP7
-----END PGP SIGNATURE-----
Merge tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes/updates from Vineet Gupta
- Missing reads{x}()/writes{x}() getting in the way of some drivers [Jose Abreu]
- Builds defaulting to ARCv2 ISA based configsa [Kevin Hilman]
- Misc fixes
* tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: io.h: Implement reads{x}()/writes{x}()
ARC: change defconfig defaults to ARCv2
arc: [devboards] Add support of NFSv3 ACL
ARC: mm: fix uninitialised signal code in do_page_fault
ARC: [plat-hsdk] Enable DW APB GPIO support
ARCv2: boot log unaligned access in use
ARC: IOC: panic if kernel was started with previously enabled IOC
ARC: remove redundant 'default n' from Kconfig
This is a full revert of ac5b2c1891 ("mm: thp: relax __GFP_THISNODE for
MADV_HUGEPAGE mappings") and a partial revert of 89c83fb539 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask").
By not setting __GFP_THISNODE, applications can allocate remote hugepages
when the local node is fragmented or low on memory when either the thp
defrag setting is "always" or the vma has been madvised with
MADV_HUGEPAGE.
Remote access to hugepages often has much higher latency than local pages
of the native page size. On Haswell, ac5b2c1891 was shown to have a
13.9% access regression after this commit for binaries that remap their
text segment to be backed by transparent hugepages.
The intent of ac5b2c1891 is to address an issue where a local node is
low on memory or fragmented such that a hugepage cannot be allocated. In
every scenario where this was described as a fix, there is abundant and
unfragmented remote memory available to allocate from, even with a greater
access latency.
If remote memory is also low or fragmented, not setting __GFP_THISNODE was
also measured on Haswell to have a 40% regression in allocation latency.
Restore __GFP_THISNODE for thp allocations.
Fixes: ac5b2c1891 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Fixes: 89c83fb539 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask")
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A "short" ARS (address range scrub) instructs the platform firmware to
return known errors. In contrast, a "long" ARS instructs platform
firmware to arrange every data address on the DIMM to be read / checked
for poisoned data.
The conversion of the flags in commit d3abaf43ba "acpi, nfit: Fix
Address Range Scrub completion tracking", changed the meaning of passing
'0' to acpi_nfit_ars_rescan(). Previously '0' meant "not short", now '0'
is ARS_REQ_SHORT. Pass ARS_REQ_LONG to restore the expected scrub-type
behavior of user-initiated ARS sessions.
Fixes: d3abaf43ba ("acpi, nfit: Fix Address Range Scrub completion tracking")
Reported-by: Jacek Zloch <jacek.zloch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit cfe30b8720 "libnvdimm, pmem: adjust for section collisions with
'System RAM'" enabled Linux to workaround occasions where platform
firmware arranges for "System RAM" and "Persistent Memory" to collide
within a single section boundary. Unfortunately, as reported in this
issue [1], platform firmware can inflict the same collision between
persistent memory regions.
The approach of interrogating iomem_resource does not work in this
case because platform firmware may merge multiple regions into a single
iomem_resource range. Instead provide a method to interrogate regions
that share the same parent bus.
This is a stop-gap until the core-MM can grow support for hotplug on
sub-section boundaries.
[1]: https://github.com/pmem/ndctl/issues/76
Fixes: cfe30b8720 ("libnvdimm, pmem: adjust for section collisions with...")
Cc: <stable@vger.kernel.org>
Reported-by: Patrick Geary <patrickg@supermicro.com>
Tested-by: Patrick Geary <patrickg@supermicro.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for libnvdimm growing new restrictions to detect section
conflicts between persistent memory regions, enable nfit_test to
allocate aligned resources. Use a gen_pool to allocate nfit_test's fake
resources in a separate address space from the virtual translation of
the same.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----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=3dD7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181205' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit earlier in the week as usual, but there's a fix here that should
go in sooner rather than later.
Under a combination of circumstance, the direct issue path in blk-mq
could corrupt data. This wasn't easy to hit, but the ones that are
affected by it, seem to hit it pretty easily. Full explanation in the
patch. None of the regular filesystem and storage testing has
triggered it, even though it's been around since 4.19-rc1.
Outside of that, whitelist trim tweak for certain Samsung devices for
libata"
* tag 'for-linus-20181205' of git://git.kernel.dk/linux-block:
blk-mq: fix corruption with direct issue
libata: whitelist all SAMSUNG MZ7KM* solid-state disks
When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwsim
* AP mode (client powersave related)
* CSA/FTM interaction
* a busy loop in IE handling
* and similar
-----BEGIN PGP SIGNATURE-----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=MDbC
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg:
====================
As it's been a while, we have various fixes for
* hwsim
* AP mode (client powersave related)
* CSA/FTM interaction
* a busy loop in IE handling
* and similar
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=VW/F
-----END PGP SIGNATURE-----
Merge tag 'for-4.20-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A patch in 4.19 introduced a sanity check that was too strict and a
filesystem cannot be mounted.
This happens for filesystems with more than 10 devices and has been
reported by a few users so we need the fix to propagate to stable"
* tag 'for-4.20-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable
Revert a problematic recent commit that attempted to fix
a system-wide suspend issue related to the freezer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJcB7qkAAoJEILEb/54YlRxhYcQALPV+/QzRpRbgtD4IOP7daYp
S1oZw6TTol79kWeL3Ts6a34lTjeG9QTDEahhXVPnNTgCcBuPpuNU4W/a7lSuPCZ3
yjcEND4OH9Ui9x25vWEFhh9AtHGK79M15DLY38ytZapWBqwBc3NYm0+3uL0xmP2n
gtk4SYtuDULnvRel6yei1tnKJ6ZLuKHEjlNrqerpmHhKmxu9VP8mG31daU9HPUBK
FyJIAiQY3RwnVNC8mmYHMqgAYsCGIR/kMoW5wSb+LYeTppYq9hAZINcUFOV32jSb
ebheoQ8sT1UhXtVD5Z0l7A3x4Mg9W9ngE3ZVS84f5R3XGrs73ExCOBpBF0GLjRjc
857WqhzWFjNYoyS8PFmwCkzMLDxMeUO2UEu/8lCtOH1efNCX75IFBIPRJhY2IhYH
ml6psr6DKAbnK1CgUV4L3jEaadCK9GqLs43jEuNveX0EmWAJtibLXNY3QtVV5a4C
xXrsPy297j0e/xq2KDCtRov+dwENe7Rm5N0Qzqkk9V/T3XB89UnDmynjXXGSzNWK
SkW/3EbUG/EbrF1Kv62vMUy4HFEUgzLjrL8ls2ooZu0mvQk2qeJgLnhnqI1XUp6+
4VJ4B/48rHXaSLdctnoYlhRWMkn4DK5jmjun1wHf4HZ+ESiKXoS5R70Jy2cMorbv
bmMfbuoCHkmq8RLs9Hdz
=ef93
-----END PGP SIGNATURE-----
Merge tag 'pm-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a problematic recent commit that attempted to fix a system-wide
suspend issue related to the freezer"
* tag 'pm-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "exec: make de_thread() freezable"
Acer AIO Veriton Z4860G/Z6860G with the same ALC286 codec has issues
with the input from external microphone. The issue can be fixed by
the fixup ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE for Veriton Z4660G.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer AIO Veriton Z4660G with ALC286 codec has issue with the input
from external microphones connecting via 'Front Mic' jack. The fixup
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE enables the jack sensing of
the headset and fix the audio input issue of external microphone.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer AIO Aspire C24-860 with ALC286 can't detect the headset
microphone. Just like another Acer AIO U27-880, it needs a different
pin value for 0x18 and the headset fixup to make headset mic work.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer Aspire U27-880(AIO) with ALC286 codec can not detect headset mic
and internal mic not working either. It needs the similar quirk like
Sony laptops to fix headphone jack sensing and enables use of the
internal microphone.
Unfortunately jack sensing for the headset mic is still not working.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of devm_thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
If the connection is broken, then xs_tcp_state_change() will take care
of scheduling the socket close as soon as appropriate. xs_read_stream()
just needs to report the error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we do not exit the socket read callback without clearing
XPRT_SOCK_DATA_READY.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When discarding message data from the stream, we're better off using
the discard iterator, since that will work with non-TCP streams.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the allocator fails before it has reached the target number of pages,
then we need to recheck that we're not seeking past the page buffer.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The RPC code is occasionally hanging when the receive code fails to
empty the socket buffer due to a partial read of the data. When we
convert that to an EAGAIN, it appears we occasionally leave data in the
socket. The fix is to just keep reading until the socket returns
EAGAIN/EWOULDBLOCK.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
This function was modified to support the information element extension
case (WLAN_EID_EXTENSION) in a manner that would result in an infinite
loop when going through set of IEs that include WLAN_EID_RIC_DATA and
contain an IE that is in the after_ric array. The only place where this
can currently happen is in mac80211 ieee80211_send_assoc() where
ieee80211_ie_split_ric() is called with after_ric[].
This can be triggered by valid data from user space nl80211
association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The
only known application having an option to include WLAN_EID_RIC_DATA in
these requests is wpa_supplicant and it had a bug that prevented this
specific contents from being used (and because of that, not triggering
this kernel bug in an automated test case ap_ft_ric) and now that this
bug is fixed, it has a workaround to avoid this kernel issue.
WLAN_EID_RIC_DATA is currently used only for testing purposes, so this
does not cause significant harm for production use cases.
Fixes: 2512b1b18d ("mac80211: extend ieee80211_ie_split to support EXTENSION")
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NullFunc packets should never be duplicate just like
QoS-NullFunc packets.
We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449
CC: <stable@vger.kernel.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.
Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.
Fixes: f027c2aca0 ("mac80211: add ieee80211_tx_status_noskb")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.
This basically reverts the change in commit 68e5fc4a25 ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.
Fixes: 68e5fc4a25 ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: Peter Shih <pihsun@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB-serial console implementation has never reported the actual
terminal settings used. Despite storing the corresponding cflags in its
struct console, these were never honoured on later tty open() where the
tty termios would be left initialised to the driver defaults.
Unlike the serial console implementation, the USB-serial code calls
subdriver open() already at console setup. While calling set_termios()
and write() before open() looks like it could work for some USB-serial
drivers, others definitely do not expect this, so modelling this after
serial core is going to be intrusive, if at all possible.
Instead, use a (renamed) tty helper to save the termios data used at
console setup so that the tty termios reflects the actual terminal
settings after a subsequent tty open().
Note that the calls to tty_init_termios() (tty_driver_install()) and
tty_save_termios() are serialised using the disconnect mutex.
This specifically fixes a regression that was triggered by a recent
change adding software flow control to the pl2303 driver: a getty trying
to disable flow control while leaving the baud rate unchanged would now
also set the baud rate to the driver default (prior to the flow-control
change this had been a noop).
Fixes: 7041d9c3f0 ("USB: serial: pl2303: add support for tx xon/xoff flow control")
Cc: stable <stable@vger.kernel.org> # 4.18
Cc: Florian Zumbiehl <florz@florz.de>
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
This reverts commit 3aa2177e47.
That commit triggered a new WARN when unloading the module (see at the
end of the commit message). When a class_dev is embedded in a structure
then that class_dev is the thing that controls the lifetime of that
structure, for that reason device managed allocations can't be used here.
See Documentation/kobject.txt.
Revert the above patch, so the struct is allocated using kzalloc and we
have a release function for it that frees the allocated memory, otherwise
it is broken.
------------[ cut here ]------------
Device 'cros_ec' does not have a release() function, it is broken and must be fixed.
WARNING: CPU: 3 PID: 3675 at drivers/base/core.c:895 device_release+0x80/0x90
Modules linked in: btusb btrtl btintel btbcm bluetooth ...
CPU: 3 PID: 3675 Comm: rmmod Not tainted 4.20.0-rc4 #76
Hardware name: Google Kevin (DT)
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : device_release+0x80/0x90
lr : device_release+0x80/0x90
sp : ffff00000c47bc70
x29: ffff00000c47bc70 x28: ffff8000e86b0d40
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000056000000 x24: 0000000000000015
x23: ffff8000f0bbf860 x22: ffff000000d320a0
x21: ffff8000ee93e100 x20: ffff8000ed931428
x19: ffff8000ed931418 x18: 0000000000000020
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000400 x14: 0000000000000143
x13: 0000000000000000 x12: 0000000000000400
x11: 0000000000000157 x10: 0000000000000960
x9 : ffff00000c47b9b0 x8 : ffff8000e86b1700
x7 : 0000000000000000 x6 : ffff8000f7d520b8
x5 : ffff8000f7d520b8 x4 : 0000000000000000
x3 : ffff8000f7d58e68 x2 : ffff8000e86b0d40
x1 : 37d859939c964800 x0 : 0000000000000000
Call trace:
device_release+0x80/0x90
kobject_put+0x74/0xe8
device_unregister+0x20/0x30
ec_device_remove+0x34/0x48 [cros_ec_dev]
platform_drv_remove+0x28/0x48
device_release_driver_internal+0x1a8/0x240
driver_detach+0x40/0x80
bus_remove_driver+0x54/0xa8
driver_unregister+0x2c/0x58
platform_driver_unregister+0x10/0x18
cros_ec_dev_exit+0x1c/0x2d8 [cros_ec_dev]
__arm64_sys_delete_module+0x16c/0x1f8
el0_svc_common+0x84/0xd8
el0_svc_handler+0x2c/0x80
el0_svc+0x8/0xc
---[ end trace a57c4625f3c60ae8 ]---
Cc: stable@vger.kernel.org
Fixes: 3aa2177e47 ("mfd: cros_ec: Use devm_kzalloc for private data")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is
in 0781:5591, will aggressively request LPM of U1/U2 during runtime,
when using this thumb drive as the OS installation key we found the
device will generate failure during U1 exit path making it dropped
from the USB bus, this causes a corrupted installation in system at
the end.
i.e.,
[ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004
[ 166.918327] usb usb2-port2: link state change
[ 166.918337] usb usb2-port2: do warm reset
[ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms
[ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms
[ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s
[ 167.276050] usb 2-2: USB disconnect, device number 2
[ 167.276058] usb 2-2: unregistering device
[ 167.276060] usb 2-2: unregistering interface 2-2:1.0
[ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk
[ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00
...
Analyzed the USB trace in the link layer we realized it is because
of the 6-ms timer of tRecoveryConfigurationTimeout which documented
on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from
Recovery.Configuration"; device initiates U1 exit -> Recovery.Active
-> Recovery.Configuration, then the host timer timeout makes the link
transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.
Interestingly, the other higher volume of SanDisk Ultra Flair sharing
the same VID:PID, such as 64GB, would not request LPM during runtime,
it sticks at U0 always, thus disabling LPM does not affect those thumb
drives at all.
The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot and KASAN found the following invalid-free bug in
port_over_current_notify():
--------------------------------------------------------------------------
BUG: KASAN: double-free or invalid-free in port_over_current_notify
drivers/usb/core/hub.c:5192 [inline]
BUG: KASAN: double-free or invalid-free in port_event
drivers/usb/core/hub.c:5241 [inline]
BUG: KASAN: double-free or invalid-free in hub_event+0xd97/0x4140
drivers/usb/core/hub.c:5384
CPU: 1 PID: 32710 Comm: kworker/1:3 Not tainted 4.20.0-rc3+ #129
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_invalid_free+0x64/0xa0 mm/kasan/report.c:336
__kasan_slab_free+0x13a/0x150 mm/kasan/kasan.c:501
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
port_over_current_notify drivers/usb/core/hub.c:5192 [inline]
port_event drivers/usb/core/hub.c:5241 [inline]
hub_event+0xd97/0x4140 drivers/usb/core/hub.c:5384
process_one_work+0xc90/0x1c40 kernel/workqueue.c:2153
worker_thread+0x17f/0x1390 kernel/workqueue.c:2296
kthread+0x35a/0x440 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
--------------------------------------------------------------------------
The problem is caused by use of a static array to store
environment-string pointers. When the routine is called by multiple
threads concurrently, the pointers from one thread can overwrite those
from another.
The solution is to use an ordinary automatic array instead of a static
array.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+98881958e1410ec7e53c@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add another Apple Cinema Display to the list of supported displays.
Signed-off-by: Alexander Theissen <alex.theissen@me.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pstapriv->max_num_sta is always <= NUM_STA, since max_num_sta is either
set in _rtw_init_sta_priv() or rtw_set_beacon().
Fixes: ef9209b642 ("staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8b7a13c3f4 ("staging: r8712u: Fix possible buffer
overrun") we fix a potential off by one by making the limit smaller.
The better fix is to make the buffer larger. This makes it match up
with the similar code in other drivers.
Fixes: 8b7a13c3f4 ("staging: r8712u: Fix possible buffer overrun")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver defines three states for a cppi channel.
- idle: .chan_busy == 0 && not in .pending list
- pending: .chan_busy == 0 && in .pending list
- busy: .chan_busy == 1 && not in .pending list
There are cases in which the cppi channel could be in the pending state
when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
is called.
cppi41_stop_chan() has a bug for these cases to set channels to idle state.
It only checks the .chan_busy flag, but not the .pending list, then later
when cppi41_runtime_resume() is called the channels in .pending list will
be transitioned to busy state.
Removing channels from the .pending list solves the problem.
Fixes: 975faaeb99 ("dma: cppi41: start tear down only if channel is busy")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Bin Liu <b-liu@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA buffer descriptors aren't allocated from atomic context, so they
can use the less heavyweigth GFP_NOWAIT.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dmaengine documentation states that device_terminate_all may be
asynchronous and need not wait for the active transfers to stop.
This allows us to move most of the functionality currently implemented
in the sdma channel termination function to run in a worker, outside
of any atomic context. Moving this out of atomic context has two
benefits: we can now sleep while waiting for the channel to terminate,
instead of busy waiting and the freeing of the dma descriptors happens
with IRQs enabled, getting rid of a warning in the dma mapping code.
As the termination is now async, we need to implement the
device_synchronize dma engine function which simply waits for the
worker to finish its execution.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit fe5b85c656. The SDMA engine needs the descriptors to
be contiguous in memory. As the dma pool API is only able to provide a
single descriptor per alloc invocation there is no guarantee that multiple
descriptors satisfy this requirement. Also the code in question is broken
as it only allocates memory for a single descriptor, without looking at the
number of descriptors required for the transfer, leading to out-of-bounds
accesses when the descriptors are written.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit c1199875d3, as this depends on another commit
that is going to be reverted.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is troublesome to add a diagnostic like this to the Makefile
parse stage because the top-level Makefile could be parsed with
a stale include/config/auto.conf.
Once you are hit by the error about non-retpoline compiler, the
compilation still breaks even after disabling CONFIG_RETPOLINE.
The easiest fix is to move this check to the "archprepare" like
this commit did:
829fe4aa9a ("x86: Allow generating user-space headers without a compiler")
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Fixes: 4cd24de3a0 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com
Link: https://lkml.org/lkml/2018/12/4/206
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to
store a replacement entry in the Xarray at the given xas-index with the
DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked
value of the entry relative to the current Xarray state to be specified.
In most contexts dax_unlock_entry() is operating in the same scope as
the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry()
case the implementation needs to recall the original entry. In the case
where the original entry is a 'pmd' entry it is possible that the pfn
performed to do the lookup is misaligned to the value retrieved in the
Xarray.
Change the api to return the unlock cookie from dax_lock_page() and pass
it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was
assuming that the page was PMD-aligned if the entry was a PMD entry with
signatures like:
WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0
RIP: 0010:dax_insert_entry+0x2b2/0x2d0
[..]
Call Trace:
dax_iomap_pte_fault.isra.41+0x791/0xde0
ext4_dax_huge_fault+0x16f/0x1f0
? up_read+0x1c/0xa0
__do_fault+0x1f/0x160
__handle_mm_fault+0x1033/0x1490
handle_mm_fault+0x18b/0x3d0
Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org
Fixes: 9f32d22130 ("dax: Convert dax_lock_mapping_entry to XArray")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the armada thermal module is inserted, removed and then reinserted,
the system panics as per the messages below. The reason is that "edit"
a live resource in the resource tree twice, and end up with it pointing
to some other hardware.
Editing live resources (resources that are part of the registered
resource tree) is not permissible - the resource tree is an ordered
set of resources, sorted by start address, and when a new resource is
inserted, it is validated that it (a) fits within its parent resource
and (b) does not overlap a neighbouring resource.
Get rid of this resource editing. We can instead adjust the return
value from ioremap() as ioremap() deals with the creation of page-
based mappings - provided the adjustment does not cross a page
boundary.
SError Interrupt on CPU1, code 0xbf000000 -- SError
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
pstate: 20400085 (nzCv daIf +PAN -UAO)
pc : regmap_mmio_read+0x3c/0x60
lr : regmap_mmio_read+0x3c/0x60
sp : ffffff800d453900
x29: ffffff800d453900 x28: ffffff800096a1d0
x27: 0000000000000100 x26: ffffff80009696d8
x25: ffffff8000969000 x24: ffffffc13a588918
x23: ffffffc13a9a28a8 x22: ffffff800d4539dc
x21: 0000000000000084 x20: ffffff800d4539dc
x19: ffffffc13a5d5480 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
x9 : 0000000000000000 x8 : ffffffc13a5d5a80
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffff800851be70 x2 : ffffff800851bd60
x1 : ffffff800d492ff8 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
Call trace:
dump_backtrace+0x0/0x158
show_stack+0x14/0x1c
dump_stack+0x90/0xb0
panic+0x128/0x298
print_tainted+0x0/0xa8
arm64_serror_panic+0x74/0x80
do_serror+0x5c/0xb8
el1_error+0xb4/0x144
regmap_mmio_read+0x3c/0x60
_regmap_bus_reg_read+0x18/0x20
_regmap_read+0x64/0x180
regmap_read+0x44/0x6c
armada_ap806_init+0x24/0x5c [armada_thermal]
armada_thermal_probe+0x2c8/0x37c [armada_thermal]
platform_drv_probe+0x4c/0xb0
really_probe+0x21c/0x2b4
driver_probe_device+0x58/0xfc
__driver_attach+0xd4/0xd8
bus_for_each_dev+0x50/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x1c4/0x228
driver_register+0x6c/0x124
__platform_driver_register+0x4c/0x54
armada_thermal_driver_init+0x20/0x1000 [armada_thermal]
do_one_initcall+0x30/0x204
do_init_module+0x5c/0x1d4
load_module+0x1a88/0x212c
__se_sys_finit_module+0xa0/0xac
__arm64_sys_finit_module+0x1c/0x24
el0_svc_common+0x94/0xf0
el0_svc_handler+0x24/0x80
el0_svc+0x8/0x3c0
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,21806000
Memory Limit: none
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The .validate phylink callback should empty the supported bitmap when
the interface mode is invalid.
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mvpp2_phylink_validate() relies on the interface field of
phylink_link_state to determine valid link modes. However, when called
from phylink_sfp_module_insert() this field in not initialized. The
default switch case then excludes 10G link modes. This allows 10G SFP
modules that are detected correctly to be configured at max rate of
2.5G.
Catch the uninitialized PHY mode case, and allow 10G rates.
Fixes: d97c9f4ab0 ("net: mvpp2: 1000baseX support")
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid()
pointer") removed the unnecessary indirection through a function
pointer, but in doing so, also removed the negation operator too:
- if (priv->data->is_valid && !priv->data->is_valid(priv)) {
+ if (armada_is_valid(priv)) {
which results in:
armada_thermal f06f808c.thermal: Temperature sensor reading not valid
armada_thermal f2400078.thermal: Temperature sensor reading not valid
armada_thermal f4400078.thermal: Temperature sensor reading not valid
at boot, or whenever the "temp" sysfs file is read. Replace the
negation operator.
Fixes: 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid() pointer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
