Commit Graph

16129 Commits

Author SHA1 Message Date
David S. Miller
1c114f42a5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-08-10 15:59:38 -07:00
John W. Linville
533b12c88d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2010-08-10 16:16:58 -04:00
Mat Martineau
cff70fae11 Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM
remote_tx_win is intended to be set on receipt of an L2CAP
configuration request.  The value is used to determine the size of the
transmit window on the remote side of an ERTM connection, so L2CAP
can stop sending frames when that remote window is full.

An incorrect remote_tx_win value will cause the stack to not fully
utilize the tx window (performance impact), or to overfill the remote
tx window (causing dropped frames or a disconnect).

This patch removes an extra setting of remote_tx_win when a
configuration response is received.  The transmit window has a
different meaning in a response - it is an informational value
less than or equal to the local tx_win.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10 07:59:11 -04:00
Mat Martineau
86b1b26326 Bluetooth: Fix endianness issue with L2CAP MPS configuration
Incoming configuration values must be converted to native CPU order
before use.  This fixes a bug where a little-endian MPS value is
compared to a native CPU value.  On big-endian processors, this
can cause ERTM and streaming mode segmentation to produce PDUs
that are larger than the remote stack is expecting, or that would
produce fragmented skbs that the current FCS code cannot handle.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10 07:59:09 -04:00
Ben Greear
9871e50edd net: Use NET_XMIT_SUCCESS where possible.
This is based on work originally done by Patric McHardy.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10 02:51:11 -07:00
Jarek Poplawski
68fd26b598 pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles
Verify in register_qdisc() some basic qdisc class handlers are present.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10 01:39:14 -07:00
Jarek Poplawski
da7115d94a pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles
Add dummy .unbind_tcf and .put qdisc class ops for easier verification.
(All other schedulers have it like this.)

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10 01:39:13 -07:00
Johannes Berg
fe100acddf cfg80211: fix locking in action frame TX
Accesses to "wdev->current_bss" must be
locked with the wdev lock, which action
frame transmission is missing.

Cc: stable@kernel.org [2.6.33+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-09 15:18:57 -04:00
Jarek Poplawski
eb4a5527b1 pkt_sched: Fix sch_sfq vs tcf_bind_filter oops
Since there was added ->tcf_chain() method without ->bind_tcf() to
sch_sfq class options, there is oops when a filter is added with
the classid parameter.

Fixes commit 7d2681a6ff
netdev thread: null pointer at cls_api.c

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Reported-by: Franchoze Eric <franchoze@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07 22:45:41 -07:00
Changli Gao
cece1945bf net: disable preemption before call smp_processor_id()
Although netif_rx() isn't expected to be called in process context with
preemption enabled, it'd better handle this case. And this is why get_cpu()
is used in the non-RPS #ifdef branch. If tree RCU is selected,
rcu_read_lock() won't disable preemption, so preempt_disable() should be
called explictly.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07 20:35:43 -07:00
Dmitry Popov
ba78e2ddca tcp: no md5sig option size check bug
tcp_parse_md5sig_option doesn't check md5sig option (TCPOPT_MD5SIG)
length, but tcp_v[46]_inbound_md5_hash assume that it's at least 16
bytes long.

Signed-off-by: Dmitry Popov <dp@highloadlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07 20:24:28 -07:00
David S. Miller
e225567960 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-08-06 13:30:43 -07:00
Jarek Poplawski
ce9e76c845 net: Fix napi_gro_frags vs netpoll path
The netpoll_rx_on() check in __napi_gro_receive() skips part of the
"common" GRO_NORMAL path, especially "pull:" in dev_gro_receive(),
where at least eth header should be copied for entirely paged skbs.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05 13:21:25 -07:00
John W. Linville
c0068c8589 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2010-08-05 15:54:28 -04:00
stephen hemminger
d7100da026 ppp: make channel_ops const
The PPP channel ops structure should be const.
Cleanup the declarations to use standard C99 format.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:17 -07:00
David Howells
3b5bac2bde RxRPC: Fix a potential deadlock between the call resend_timer and state_lock
RxRPC can potentially deadlock as rxrpc_resend_time_expired() wants to get
call->state_lock so that it can alter the state of an RxRPC call.  However, its
caller (call_timer_fn()) has an apparent lock on the timer struct.

The problem is that rxrpc_resend_time_expired() isn't permitted to lock
call->state_lock as this could cause a deadlock against rxrpc_send_abort() as
that takes state_lock and then attempts to delete the resend timer by calling
del_timer_sync().

The deadlock can occur because del_timer_sync() will sit there forever waiting
for rxrpc_resend_time_expired() to return, but the latter may then wait for
call->state_lock, which rxrpc_send_abort() holds around del_timer_sync()...

This leads to a warning appearing in the kernel log that looks something like
the attached.

It should be sufficient to simply dispense with the locks.  It doesn't matter
if we set the resend timer expired event bit and queue the event processor
whilst we're changing state to one where the resend timer is irrelevant as the
event can just be ignored by the processor thereafter.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35-rc3-cachefs+ #115
-------------------------------------------------------
swapper/0 is trying to acquire lock:
 (&call->state_lock){++--..}, at: [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc]

but task is already holding lock:
 (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&call->resend_timer){+.-...}:
       [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa
       [<ffffffff81056184>] lock_acquire+0x57/0x6d
       [<ffffffff8103bb9c>] del_timer_sync+0x3c/0x86
       [<ffffffffa002bb7a>] rxrpc_send_abort+0x50/0x97 [af_rxrpc]
       [<ffffffffa002bdd9>] rxrpc_kernel_abort_call+0xa1/0xdd [af_rxrpc]
       [<ffffffffa0061588>] afs_deliver_to_call+0x129/0x368 [kafs]
       [<ffffffffa006181b>] afs_process_async_call+0x54/0xff [kafs]
       [<ffffffff8104261d>] worker_thread+0x1ef/0x2e2
       [<ffffffff81045f47>] kthread+0x7a/0x82
       [<ffffffff81002cd4>] kernel_thread_helper+0x4/0x10

-> #0 (&call->state_lock){++--..}:
       [<ffffffff81055237>] validate_chain+0x727/0xd23
       [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa
       [<ffffffff81056184>] lock_acquire+0x57/0x6d
       [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43
       [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc]
       [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5
       [<ffffffff81036828>] __do_softirq+0xa2/0x13e
       [<ffffffff81002dcc>] call_softirq+0x1c/0x28
       [<ffffffff810049f0>] do_softirq+0x38/0x80
       [<ffffffff810361a2>] irq_exit+0x45/0x47
       [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96
       [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20
       [<ffffffff810011ac>] cpu_idle+0x4d/0x83
       [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1

other info that might help us debug this:

1 lock held by swapper/0:
 #0:  (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5

stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-cachefs+ #115
Call Trace:
 <IRQ>  [<ffffffff81054414>] print_circular_bug+0xae/0xbd
 [<ffffffff81055237>] validate_chain+0x727/0xd23
 [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa
 [<ffffffff810539a7>] ? mark_lock+0x42f/0x51f
 [<ffffffff81056184>] lock_acquire+0x57/0x6d
 [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc]
 [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43
 [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc]
 [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc]
 [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5
 [<ffffffff8103b675>] ? run_timer_softirq+0x182/0x2a5
 [<ffffffffa002007e>] ? rxrpc_resend_time_expired+0x0/0x96 [af_rxrpc]
 [<ffffffff810367ef>] ? __do_softirq+0x69/0x13e
 [<ffffffff81036828>] __do_softirq+0xa2/0x13e
 [<ffffffff81002dcc>] call_softirq+0x1c/0x28
 [<ffffffff810049f0>] do_softirq+0x38/0x80
 [<ffffffff810361a2>] irq_exit+0x45/0x47
 [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96
 [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20
 <EOI>  [<ffffffff81049de1>] ? __atomic_notifier_call_chain+0x0/0x86
 [<ffffffff8100955b>] ? mwait_idle+0x6e/0x78
 [<ffffffff81009552>] ? mwait_idle+0x65/0x78
 [<ffffffff810011ac>] cpu_idle+0x4d/0x83
 [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:16 -07:00
Changli Gao
f2f009812f sch_sfq: add sanity check for the packet length
The packet length should be checked before the packet data is dereferenced.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:16 -07:00
Changli Gao
12dc96d167 cls_rsvp: add sanity check for the packet length
The packet length should be checked before the packet data is dereferenced.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:15 -07:00
Changli Gao
4b95c3d40d cls_flow: add sanity check for the packet length
The packet length should be checked before the packet data is dereferenced.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:15 -07:00
Changli Gao
36d12690a2 act_nat: fix on the TX path
On the TX path, skb->data points to the ethernet header, not the network
header. So when validating the packet length for accessing we should
take the ethernet header into account.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04 21:53:14 -07:00
Linus Torvalds
3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Juuso Oikarinen
93c08c3291 mac80211: Fix compilation warning when CONFIG_INET is not set
The warning is:
  net/mac80211/main.c:688: warning: label ‘fail_ifa’ defined but not used

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04 15:28:37 -04:00
Johannes Berg
1601b1e56e mac80211: fix scan locking wrt. hw scan
Releasing the scan mutex while starting scans
can lead to unexpected things happening, so
we shouldn't do that. Fix that and hold the
mutex across the scan triggering.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04 15:27:36 -04:00
Linus Torvalds
6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Ville Tervo
adb08edea0 Bluetooth: Check result code of L2CAP information response
Check result code of L2CAP information response. Otherwise
it would read invalid feature mask and access invalid memory.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04 07:25:17 -07:00
Gustavo F. Padovan
6340650400 Bluetooth: Don't send RFC for Basic Mode if only it is supported
If the remote side doesn't support Enhanced Retransmission Mode neither
Streaming Mode, we shall not send the RFC option.

Some devices that only supports Basic Mode do not understanding the RFC
option. This patch fixes the regression found with these devices.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04 07:23:00 -07:00
Jiri Kosina
d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Oliver Hartkopp
cff0d6e6ed can-raw: Fix skb_orphan_try handling
Commit fc6055a5ba (net: Introduce
skb_orphan_try()) allows an early orphan of the skb and takes care on
tx timestamping, which needs the sk-reference in the skb on driver level.
So does the can-raw socket, which has not been taken into account here.

The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info,
which fixes the problem discovered by Matthias Fuchs here:

      http://marc.info/?t=128030411900003&r=1&w=2

Even if it's not a primary tx timestamp topic it fits well into some skb
shared tx context. Or should be find a different place for the information to
protect the sk reference until it reaches the driver level?

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03 00:31:48 -07:00
David S. Miller
3578b0c8ab Revert "net: remove zap_completion_queue"
This reverts commit 15e83ed788.

As explained by Johannes Berg, the optimization made here is
invalid.  Or, at best, incomplete.

Not only destructor invocation, but conntract entry releasing
must be executed outside of hw IRQ context.

So just checking "skb->destructor" is insufficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03 00:24:04 -07:00
Changli Gao
a427615e04 net: cleanup inclusion
Commit ab95bfe01f replaces bridge and macvlan
hooks in __netif_receive_skb(), so dev.c doesn't need to include their headers.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02 22:45:49 -07:00
David S. Miller
00dad5e479 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/e1000e/hw.h
	net/bridge/br_device.c
	net/bridge/br_input.c
2010-08-02 22:22:46 -07:00
stephen hemminger
66d50d2550 u32: negative offset fix
It was possible to use a negative offset in a u32 match to reference
the ethernet header or other parts of the link layer header.
This fixes the regression caused by:

commit fbc2e7d9cf
Author: Changli Gao <xiaosuo@gmail.com>
Date:   Wed Jun 2 07:32:42 2010 -0700

    cls_u32: use skb_header_pointer() to dereference data safely

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02 22:07:45 -07:00
Changli Gao
c893b8066c ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
6c79bf0f24 subtracts PPPOE_SES_HLEN from mtu at
the front of ip_fragment(). So the later subtraction should be removed. The
MTU of 802.1q is also 1500, so MTU should not be changed.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Bart De Schuymer <bdschuym@pandora.bo>
----
 net/ipv4/ip_output.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
Signed-off-by: Bart De Schuymer <bdschuym@pandora.bo>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02 17:25:07 -07:00
Josh Hunt
3c0fef0b7d net: Add getsockopt support for TCP thin-streams
Initial TCP thin-stream commit did not add getsockopt support for the new
socket options: TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK. This adds support
for them.

Signed-off-by: Josh Hunt <johunt@akamai.com>
Tested-by: Andreas Petlund <apetlund@simula.no>
Acked-by: Andreas Petlund <apetlund@simula.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02 17:25:06 -07:00
David S. Miller
83bf2e4089 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2010-08-02 15:07:58 -07:00
Aneesh Kumar K.V
0b1208b1aa fs/9p: destroy fid on failed remove
9P spec says:
"It is correct to consider remove to be a clunk with the
side effect of removing the file if permissions allow. "

So even if remove fails we need to destroy the fid.

Without this patch an rmdir on a directory with contents leave
the new cloned directory fid fid attached to fidlist. On umount
we dump the fids on the fidlist

~# rmdir /mnt2/test4/
rmdir: failed to remove `/mnt2/test4/': Directory not empty
~# umount /mnt2/
~# dmesg
[  228.474323] Found fid 3 not clunked

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:36 -05:00
Aneesh Kumar K.V
eda25e4616 net/9p: Implement TXATTRCREATE 9p call
TXATTRCREATE:  Prepare a fid for setting xattr value on a file system object.

 size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
 size[4] RXATTRCREATE tag[2]

txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.

flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."

The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:34 -05:00
Aneesh Kumar K.V
0ef63f345c net/9p: Implement attrwalk 9p call
TXATTRWALK: Descend a ATTR namespace

 size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
 size[4] RXATTRWALK tag[2] size[8]

txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:33 -05:00
M. Mohan Kumar
ef56547efa 9p: Implement LOPEN
Implement 9p2000.L version of open(LOPEN) interface in 9p client.

For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.

Synopsis:

    size[4] Tlopen tag[2] fid[4] mode[4]

    size[4] Rlopen tag[2] qid[13] iounit[4]

[Fix mode bit format - jvrao@linux.vnet.ibm.com]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02 14:28:32 -05:00
Venkateswararao Jujjuri (JV)
5643135a28 fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:32 -05:00
M. Mohan Kumar
01a622bd74 9p: Implement TMKDIR
Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:31 -05:00
M. Mohan Kumar
4b43516ab1 9p: Implement TMKNOD
Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:30 -05:00
Venkateswararao Jujjuri (JV)
50cc42ff3d 9p: Define and implement TSYMLINK for 9P2000.L
Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:29 -05:00
Venkateswararao Jujjuri (JV)
652df9a7fd 9p: Define and implement TLINK for 9P2000.L
This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:25 -05:00
Sripathi Kodi
87d7845aa0 9p: Implement client side of setattr for 9P2000.L protocol.
SYNOPSIS

      size[4] Tsetattr tag[2] attr[n]

      size[4] Rsetattr tag[2]

    DESCRIPTION

      The setattr command changes some of the file status information.
      attr resembles the iattr structure used in Linux kernel. It
      specifies which status parameter is to be changed and to what
      value. It is laid out as follows:

         valid[4]
            specifies which status information is to be changed. Possible
            values are:
            ATTR_MODE       (1 << 0)
            ATTR_UID        (1 << 1)
            ATTR_GID        (1 << 2)
            ATTR_SIZE       (1 << 3)
            ATTR_ATIME      (1 << 4)
            ATTR_MTIME      (1 << 5)
            ATTR_ATIME_SET  (1 << 7)
            ATTR_MTIME_SET  (1 << 8)

            The last two bits represent whether the time information
            is being sent by the client's user space. In the absense
            of these bits the server always uses server's time.

         mode[4]
            File permission bits

         uid[4]
            Owner id of file

         gid[4]
            Group id of the file

         size[8]
            File size

         atime_sec[8]
            Time of last file access, seconds

         atime_nsec[8]
            Time of last file access, nanoseconds

         mtime_sec[8]
            Time of last file modification, seconds

         mtime_nsec[8]
            Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to
   p9_iattr_dotl structure and passes it down to the client. The
   only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
   parameters because I don't think these are needed in our case.
   The client user space can request updating just ctime by calling
   chown(fd, -1, -1). This is handled on server side without a need
   for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
   size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
   none of them does: if the request succeeds, all changes were made;
   if it fails, none were."
   I have not done anything to implement this specifically because I
   don't see a reason.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:10 -05:00
Sripathi Kodi
f085312204 9p: getattr client implementation for 9P2000.L protocol.
SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for
        9P2000.L. It introduces a new structure p9_stat_dotl for getting
        Linux stat information along with QID. The data layout is similar to
        stat structure in Linux user space with the following major
        differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense
        on the client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02 14:25:09 -05:00
Aneesh Kumar K.V
69d4b4436b net/9p: Handle the server returned error properly
We need to get the negative errno value in the kernel
even for dotl.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:08 -05:00
Sripathi Kodi
7751bdb3a0 9p: readdir implementation for 9p2000.L
This patch implements the kernel part of readdir() implementation for 9p2000.L

    Change from V3: Instead of inode, server now sends qids for each dirent

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.

    This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
    This function sends P9_TREADDIR command to the server. In response the server
    sends a buffer filled with dirent structures. This is different from the
    existing v9fs_dir_readdir() call which receives stat structures from the server.
    This results in significant speedup of readdir() on large directories.
    For example, doing 'ls >/dev/null' on a directory with 10000 files on my
    laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
    with the new readdir.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:07 -05:00
Changli Gao
6661481d5a netfilter: nf_conntrack_acct: use skb->len for accounting
use skb->len for accounting as xt_quota does. Since nf_conntrack works
at the network layer, skb_network_offset should always returns ZERO.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02 17:56:28 +02:00
Dan Carpenter
cff6b8a9b8 9p: strlen() doesn't count the terminator
This is an off by one bug because strlen() doesn't count the NULL
terminator.  We strcpy() addr into a fixed length array of size
UNIX_PATH_MAX later on.

The addr variable is the name of the device being mounted.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 10:37:17 -05:00