AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
610,797 Commits 7 Branches 0 Tags 1.9 GiB
2b47d54ed4
Commit Graph

4543 Commits

Author SHA1 Message Date
Rich Felker
2b47d54ed4 sh: add J2 atomics using the cas.l instruction 
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-08-05 03:29:34 +00:00
Rich Felker
834da19705 sh: add AT_HWCAP flag for J-Core cas.l instruction 
The J-Core cpu has, as an ISA extension, an atomic compare-and-swap
instruction cas.l which applications need to use (instead the imask or
gusa atomic models, which are fundamentally limited to UP) for
synchronization in order to be compatible with SMP systems. Provide a
hwcap flag so that it's possible to do runtime selection and support
both.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-08-05 03:29:32 +00:00
Rich Felker
5a846abad0 sh: add support for J-Core J2 processor 
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the
changes to add J2 support build on existing SH-2 support. However, J2
does not duplicate the memory-mapped SH-2 features like the cache
interface. Instead, the cache interfaces is described in the device
tree, and new code is added to be able to access the flat device tree
at early boot before it is unflattened.

Support is also added for receiving interrupts on trap numbers in the
range 16 to 31, since the J-Core aic1 interrupt controller generates
these traps. This range was unused but nominally for hardware
exceptions on SH-2, and a few values in this range were used for
exceptions on SH-2A, but SH-2A has its own version of the relevant
code.

No individual cpu subtypes are added for J2 since the intent moving
forward is to represent SoCs with device tree rather than as
hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item
exists only to fit into the existing cpu selection mechanism until it
is overhauled.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-08-05 03:29:31 +00:00
Rich Felker
03767daa13 sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE 
Such a configuration could only be selected by manually selecting
CONFIG_OF; SH_DEVICE_TREE selects both. The affected code is using the
flat DTB at boot time and thus rightfully should depend on
OF_FLATTREE, not just OF.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Rich Felker
b46ed37042 sh: allow clocksource drivers to register sched_clock backends 
There is no arch-specific sched_clock implementation for sh, resulting
in use of the old default jiffies-based implementation. Instead, use
the modern generic sched_clock framework so that drivers can register
better backends.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Paul Gortmaker
e75438e2a2 sh: make heartbeat driver explicitly non-modular 
The Kconfig for this driver is currently:

config HEARTBEAT
        bool "Heartbeat LED"

....meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Paul Gortmaker
f368d47587 sh: make board-secureedge5410 explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

config SH_SECUREEDGE5410
        bool "SecureEdge5410"

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We don't replace module.h with init.h since the file already has that.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Paul Gortmaker
f15412aa08 sh: make mm/asids-debugfs explicitly non-modular 
The Makefile/Kconfig currently controlling compilation of this code is:

obj-$(CONFIG_DEBUG_FS)          += $(debugfs-y)
debugfs-y                       := asids-debugfs.o

lib/Kconfig.debug:config DEBUG_FS
lib/Kconfig.debug:      bool "Debug Filesystem"

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular code, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Paul Gortmaker
7a65a34fae sh: make time.c explicitly non-modular 
The Makefile currently controlling compilation of this code is:

obj-y   := debugtraps.o dma-nommu.o dumpstack.o                 \
[...]
           syscalls_$(BITS).o time.o topology.o traps.o         \
           traps_$(BITS).o unwinder.o

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular code, so that when reading
the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Rich Felker
72cc564f16 sh: fix futex/robust_list on nommu models 
The futex cmpxchg runtime testing in kernel/futex.c depends on
accesses to address 0 producing EFAULT, which obviously does not work
on nommu. Since SH always has cmpxchg, disable the broken runtime
detection.

At some point this should be fixed at the kernel/futex.c level. UP
machines can always provide a working cmpxchg with interrupt masking,
and SMP cannot function without a working cmpxchg anyway.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Rich Felker
57155c6523 sh: disable aliased page logic on NOMMU models 
SH3/4 (with MMU) have a virtually indexed cache, requiring explicit
work to avoid consistency problems arising from having the same
physical address range cached in multiple cache lines. This is
unneeded for the NOMMU case, and some of the resulting code paths
(kmap_coherent) don't work. SH2 only avoided this problem by having a
4-way associative cache with way size equal to the page size (4k),
yielding no cache index bits outside of the page offset and thus no
aliases.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Rich Felker
bbe6c77857 sh: make sigcontext definition consistent across fpu/nofpu models 
Up until now, the SH version of the sigcontext structure, and thus
mcontext_t/ucontext_t, varied depending on the cpu model the kernel
was built to run on. SH-4 (including SH-4A) and SH-2A used the form
with space for FPU registers, and everything else used a form that
omitted them.

From a userspace perspective, however, the structure layout must be
fixed for a given ABI. Traditionally glibc and uClibc used the form
with space for FPU registers only when __SH4__ (which implies FPU;
__SH4_NOFPU__ is the predefined macro for SH-4 but with no-FPU ABI)
was defined. As a result:

- SH-4 no-FPU programs never matched kernel sigcontext.

- SH-3 programs did not match kernel sigcontext if run on SH-4,
  despite an apparent intent that they be compatible.

- SH-2 and SH-2A programs (using uClibc) did not match kernel
  sigcontext if run on SH-2A.

The mismatch might seem inconsequential because it occurs at the end
of the sigcontext structure, but sigcontext is embedded as uc_mcontext
in ucontext_t, where it is followed by uc_sigmask, an important member
for signal handlers to have access to. In particular, access to
uc_sigmask is necessary for a correct implementation of thread
cancellation.

It would be possible to retain support for both sigcontext ABIs via a
personality mechanism, but since many configurations were already
broken and nobody noticed, and since there are very few if any users
of legacy no-FPU models anymore, I have opted to just remove the
variation and always include space for the FPU registers in
sigcontext. This was proposed and discussed on a thread "SH sigcontext
ABI is broken" cross-posted to linux-sh, libc-alpha, and musl libc
lists in June 2015, and no objections were raised.

Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Rich Felker
190fe191cf sh: add support for linking a builtin device tree blob in the kernel 
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Pan Xinhui
ff18143cee sh: cmpxchg: fix a bit shift bug in big_endian os 
Correct bitoff in big endian OS.
Current code works correctly for 1 byte but not for 2 bytes.

Fixes: 3226aad81a ("sh: support 1 and 2 byte xchg")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rich Felker <dalias@libc.org>
 2016-07-31 03:33:32 +00:00
Linus Torvalds
f64d6e2aaa DeviceTree update for 4.8: 
- Removal of most of_platform_populate() calls in arch code. Now the DT
 core code calls it in the default case and platforms only need to call
 it if they have special needs.
 
 - Use pr_fmt on all the DT core print statements.
 
 - CoreSight binding doc improvements to block name descriptions.
 
 - Add dt_to_config script which can parse dts files and list
 corresponding kernel config options.
 
 - Fix memory leak hit with a PowerMac DT.
 
 - Correct a bunch of STMicro compatible strings to use the correct
 vendor prefix.
 
 - Fix DA9052 PMIC binding doc to match what is actually used in dts
 files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXm9KcAAoJEPr7XbWNvGHDRT4QAIIIOSB4AWHardnMLROgGge9
 aOQKZ/05O9feOcxYKe8FkQbcH+IujJjrUL+yrRD36yGQPAyBP21gtcmmfrkCcwFM
 kH915f/JbGvXpfwEf8dcarHhzYH6FFJiQGduPpWfwSSWynx+xq5EKPwCqYzMg8bN
 SExxt7vUx1MKFOExZ0K8BNCo8VMVLUWQoJ1DNeJDuL25Op4EU3i2l1HQNYV/3XDk
 BSA3x7Lw3GjrWEH20VWYn2Azq1OFLY+E2FC2lnG4nbkk5X8dZbUH9PR1Sk7uTQDj
 uxTjWe59NBpliCxKSAbMbTAU/WwSB1pJ0I+zDJBiQsdFT+nb5F4zOrs3qSKHa/A9
 Rv6AC8k5gdSMrDB1dOspfF2vWvOOInXgNV4/Kza0D92mbCpwyUuF+vhE6rfcMrZU
 OiD7rj2/fvO7Y9fUAhrp6zrfrOfH9B1Z9vS+940AlK96YwPE2+J0SA2vBxR/wg8H
 7fj4Ud5X+SFisXWQhh5Wlv0W9o6e7C7fsi8vpkQ7gufmezLFWVnJKsUfQaxGEwhG
 Hkhm9kuSHHMd+6dEnn2756DnNfJAtQv6rSR0/QR4Lf9y5L4dvR3kAQIci8X/nx4P
 sIk+IJWGZG6wziZq59hh+SO6HEqdSNuvh+5sbR0iUimdE/1HsDBdPiocXf/r8iwK
 NY9nGeZPRrXmFgdpoZfm
 =wLMr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...
 2016-07-30 11:32:01 -07:00
Linus Torvalds
a6408f6cb6 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull smp hotplug updates from Thomas Gleixner:
 "This is the next part of the hotplug rework.

   - Convert all notifiers with a priority assigned

   - Convert all CPU_STARTING/DYING notifiers

     The final removal of the STARTING/DYING infrastructure will happen
     when the merge window closes.

  Another 700 hundred line of unpenetrable maze gone :)"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  timers/core: Correct callback order during CPU hot plug
  leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
  powerpc/numa: Convert to hotplug state machine
  arm/perf: Fix hotplug state machine conversion
  irqchip/armada: Avoid unused function warnings
  ARC/time: Convert to hotplug state machine
  clocksource/atlas7: Convert to hotplug state machine
  clocksource/armada-370-xp: Convert to hotplug state machine
  clocksource/exynos_mct: Convert to hotplug state machine
  clocksource/arm_global_timer: Convert to hotplug state machine
  rcu: Convert rcutree to hotplug state machine
  KVM/arm/arm64/vgic-new: Convert to hotplug state machine
  smp/cfd: Convert core to hotplug state machine
  x86/x2apic: Convert to CPU hotplug state machine
  profile: Convert to hotplug state machine
  timers/core: Convert to hotplug state machine
  hrtimer: Convert to hotplug state machine
  x86/tboot: Convert to hotplug state machine
  arm64/armv8 deprecated: Convert to hotplug state machine
  hwtracing/coresight-etm4x: Convert to hotplug state machine
  ...
 2016-07-29 13:55:30 -07:00
Linus Torvalds
0e06f5c0de Merge branch 'akpm' (patches from Andrew) 
Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2

 - most(?) of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
  thp: fix comments of __pmd_trans_huge_lock()
  cgroup: remove unnecessary 0 check from css_from_id()
  cgroup: fix idr leak for the first cgroup root
  mm: memcontrol: fix documentation for compound parameter
  mm: memcontrol: remove BUG_ON in uncharge_list
  mm: fix build warnings in <linux/compaction.h>
  mm, thp: convert from optimistic swapin collapsing to conservative
  mm, thp: fix comment inconsistency for swapin readahead functions
  thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
  shmem: split huge pages beyond i_size under memory pressure
  thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
  khugepaged: add support of collapse for tmpfs/shmem pages
  shmem: make shmem_inode_info::lock irq-safe
  khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
  thp: extract khugepaged from mm/huge_memory.c
  shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
  shmem: add huge pages support
  shmem: get_unmapped_area align huge page
  shmem: prepare huge= mount option and sysfs knob
  mm, rmap: account shmem thp pages
  ...
 2016-07-26 19:55:54 -07:00
Linus Torvalds
1cd04d293c This is the bulk of GPIO changes for the v4.8 kernel cycle. 
Core changes:
 
 - The big item is of course the completion of the character
   device ABI. It has now replaced and surpassed the former
   unmaintainable sysfs ABI: we can now hammer (bitbang)
   individual lines or sets of lines and read individual lines
   or sets of lines from userspace, and we can also register
   to listen to GPIO events from userspace. As a tie-in we
   have two new tools in tools/gpio: gpio-hammer and
   gpio-event-mon that illustrate the proper use of the new
   ABI. As someone said: the wild west days of GPIO are now
   over.
 
 - Continued to remove the pointless
   ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols.
   I'm patching hexagon, openrisc, powerpc, sh, unicore,
   ia64 and microblaze. These are either ACKed by their
   maintainers or patched anyways after a grace period and
   no response from maintainers. Some archs (ARM) come in from
   their trees, and others (x86) are still not fixed, so I
   might send a second pull request to root it out later in
   this merge window, or just defer to v4.9.
 
 - The GPIO tools are moved to the tools build system.
 
 New drivers:
 
 - New driver for the MAX77620/MAX20024.
 
 - New driver for the Intel Merrifield.
 
 - Enabled PCA953x for the TI PCA9536.
 
 - Enabled PCA953x for the Intel Edison.
 
 - Enabled R8A7792 in the RCAR driver.
 
 Driver improvements:
 
 - The STMPE and F7188x now supports the .get_direction()
   callback.
 
 - The Xilinx driver supports setting multiple lines at
   once.
 
 - ACPI support for the Vulcan GPIO controller.
 
 - The MMIO GPIO driver supports device tree probing.
 
 - The Acer One 10 is supported through the _DEP ACPI
   attribute.
 
 Cleanups:
 
 - A major cleanup of the OF/DT support code. It is way
   easier to read and understand now, probably this improves
   performance too.
 
 - Drop a few redundant .owner assignments.
 
 - Remove CLPS711x boardfile support: we are 100% DT.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXlcT4AAoJEEEQszewGV1zACwQAK5SZr0F5c3QvYbJSiJBCGA7
 MZKUYHnYoBpZaPKcFKoOXEM1WOvlABlh9U0y0xkL8gQ6giyKup1wYJJCuYgW29gL
 ny4r7Z8rs2Wm1ujL+FLAwuxIwCY3BnhUucp8YiSaHPBuKRfsHorFPvXiAgLZjNYC
 Qk3Q48xYW4inw9sy2BbMfsU3CZnkvgy5euooyy1ezwachRhuHdBy/MVCG012PC4s
 0d6LGdByEx1uK4NeV7ssPys444M8unep2EWgy6Rvc1U+FmGA487EvL+X8nxTQTj3
 uTMxA8nddmZTEeEIqhpRw/dPiFlWxPFwfWmNEre05gKLb/LUK2tgsUOnmIFgVUw/
 t41IzdQNLQQZxmiXplZn6s5mAr2VNuTxkRq1CIl4SwQW+Uy4TU3q8aDPkKzsyhiR
 yw6o6ul0pQs8UZEggnht8ie6JiSnJ55ehI/nlRxpK/797Ff6Yp4FARs3ZtFnQDDu
 SWewnbRatZQ89lvy4BA7QCWeV4Scjk4k/e2HjUAFnkfMDaYqpi4vTdzwnWdVjd+F
 hMgu6VnkN3oSE7ZMrKJMh7b7h1uMnIwKBFWbkrlOEuhT1X0ZDsEOBv5juSBPYomN
 EOIJUyWqxn0ZfxeONbdbCPteYlfJF+TW/rE9LQMxS1nNwsqw2IQW6NCmrM9Nx6Fv
 FP++26nYMTSh82gwOYw3
 =NwcK
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...
 2016-07-26 19:16:01 -07:00
Kirill A. Shutemov
dcddffd41d mm: do not pass mm_struct into handle_mm_fault 
We always have vma->vm_mm around.

Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-07-26 16:19:19 -07:00
Aneesh Kumar K.V
e77b0852b5 mm/mmu_gather: track page size with mmu gather and force flush if page size change 
This allows an arch which needs to do special handing with respect to
different page size when flushing tlb to implement the same in mmu
gather.

Link: http://lkml.kernel.org/r/1465049193-22197-3-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-07-26 16:19:19 -07:00
Aneesh Kumar K.V
e9d55e1570 mm: change the interface for __tlb_remove_page() 
This updates the generic and arch specific implementation to return true
if we need to do a tlb flush.  That means if a __tlb_remove_page
indicate a flush is needed, the page we try to remove need to be tracked
and added again after the flush.  We need to track it because we have
already update the pte to none and we can't just loop back.

This change is done to enable us to do a tlb_flush when we try to flush
a range that consists of different page sizes.  For architectures like
ppc64, we can do a range based tlb flush and we need to track page size
for that.  When we try to remove a huge page, we will force a tlb flush
and starts a new mmu gather.

[aneesh.kumar@linux.vnet.ibm.com: mm-change-the-interface-for-__tlb_remove_page-v3]
  Link: http://lkml.kernel.org/r/1465049193-22197-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1464860389-29019-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-07-26 16:19:19 -07:00
Linus Torvalds
c86ad14d30 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull locking updates from Ingo Molnar:
 "The locking tree was busier in this cycle than the usual pattern - a
  couple of major projects happened to coincide.

  The main changes are:

   - implement the atomic_fetch_{add,sub,and,or,xor}() API natively
     across all SMP architectures (Peter Zijlstra)

   - add atomic_fetch_{inc/dec}() as well, using the generic primitives
     (Davidlohr Bueso)

   - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
     Waiman Long)

   - optimize smp_cond_load_acquire() on arm64 and implement LSE based
     atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
     on arm64 (Will Deacon)

   - introduce smp_acquire__after_ctrl_dep() and fix various barrier
     mis-uses and bugs (Peter Zijlstra)

   - after discovering ancient spin_unlock_wait() barrier bugs in its
     implementation and usage, strengthen its semantics and update/fix
     usage sites (Peter Zijlstra)

   - optimize mutex_trylock() fastpath (Peter Zijlstra)

   - ... misc fixes and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
  locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
  locking/static_keys: Fix non static symbol Sparse warning
  locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
  locking/atomic, arch/tile: Fix tilepro build
  locking/atomic, arch/m68k: Remove comment
  locking/atomic, arch/arc: Fix build
  locking/Documentation: Clarify limited control-dependency scope
  locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
  locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
  locking/atomic, arch/mips: Convert to _relaxed atomics
  locking/atomic, arch/alpha: Convert to _relaxed atomics
  locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
  locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
  locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
  locking/atomic: Fix atomic64_relaxed() bits
  locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  ...
 2016-07-25 12:41:29 -07:00
Thomas Gleixner
e3cfce17d3 sh/perf: Convert the hotplug notifiers to state machine callbacks 
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-sh@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153334.597790464@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-07-14 09:34:39 +02:00
Michal Hocko
884ed4cb8a sh: get rid of superfluous __GFP_REPEAT 
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

PGALLOC_GFP uses __GFP_REPEAT but {pgd,pmd}_alloc allocate from
{pgd,pmd}_cache but both caches are allocating up to PAGE_SIZE objects.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-15-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-06-24 17:23:52 -07:00
Michal Hocko
32d6bd9059 tree wide: get rid of __GFP_REPEAT for order-0 allocations part I 
This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-06-24 17:23:52 -07:00
Kefeng Wang
2b65893235 sh: Remove unnecessary of_platform_populate with default match table 
After patch "of/platform: Add common method to populate default bus",
it is possible for arch code to remove unnecessary callers of
of_platform_populate with default match table.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
 2016-06-23 15:00:34 -05:00
Kefeng Wang
bb8e15d604 of: iommu: make of_iommu_init() postcore_initcall_sync 
The of_iommu_init() is called multiple times by arch code,
make it postcore_initcall_sync, then we can drop relevant
calls fully.

Note, the IOMMUs should have a chance to perform some basic
initialisation before we start adding masters to them. So
postcore_initcall_sync is good choice, it ensures of_iommu_init()
called before of_platform_populate.

Acked-by: Rich Felker <dalias@libc.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
 2016-06-23 14:57:40 -05:00
Peter Zijlstra
b53d6bedbe locking/atomic: Remove linux/atomic.h:atomic_fetch_or() 
Since all architectures have this implemented now natively, remove this
dead code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-06-16 10:48:32 +02:00
Peter Zijlstra
7d9794e752 locking/atomic, arch/sh: Implement atomic_fetch_{add,sub,and,or,xor}() 
Implement FETCH-OP atomic primitives, these are very similar to the
existing OP-RETURN primitives we already have, except they return the
value of the atomic variable _before_ modification.

This is especially useful for irreversible operations -- such as
bitops (because it becomes impossible to reconstruct the state prior
to modification).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-06-16 10:48:29 +02:00
Peter Zijlstra
726328d92a locking/spinlock, arch: Update and fix spin_unlock_wait() implementations 
This patch updates/fixes all spin_unlock_wait() implementations.

The update is in semantics; where it previously was only a control
dependency, we now upgrade to a full load-acquire to match the
store-release from the spin_unlock() we waited on. This ensures that
when spin_unlock_wait() returns, we're guaranteed to observe the full
critical section we waited on.

This fixes a number of spin_unlock_wait() users that (not
unreasonably) rely on this.

I also fixed a number of ticket lock versions to only wait on the
current lock holder, instead of for a full unlock, as this is
sufficient.

Furthermore; again for ticket locks; I added an smp_rmb() in between
the initial ticket load and the spin loop testing the current value
because I could not convince myself the address dependency is
sufficient, esp. if the loads are of different sizes.

I'm more than happy to remove this smp_rmb() again if people are
certain the address dependency does indeed work as expected.

Note: PPC32 will be fixed independently

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chris@zankel.net
Cc: cmetcalf@mellanox.com
Cc: davem@davemloft.net
Cc: dhowells@redhat.com
Cc: james.hogan@imgtec.com
Cc: jejb@parisc-linux.org
Cc: linux@armlinux.org.uk
Cc: mpe@ellerman.id.au
Cc: ralf@linux-mips.org
Cc: realmz6@gmail.com
Cc: rkuo@codeaurora.org
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Cc: vgupta@synopsys.com
Cc: ysato@users.sourceforge.jp
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-06-14 11:55:15 +02:00
Linus Walleij
fdcfdfa1b5 sh: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB 
This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2016-06-08 09:55:20 +02:00
Linus Torvalds
5b26fc8824 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild 
Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...
 2016-05-26 22:01:22 -07:00
Linus Torvalds
bdc6b758e4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull perf updates from Ingo Molnar:
 "Mostly tooling and PMU driver fixes, but also a number of late updates
  such as the reworking of the call-chain size limiting logic to make
  call-graph recording more robust, plus tooling side changes for the
  new 'backwards ring-buffer' extension to the perf ring-buffer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  perf record: Read from backward ring buffer
  perf record: Rename variable to make code clear
  perf record: Prevent reading invalid data in record__mmap_read
  perf evlist: Add API to pause/resume
  perf trace: Use the ptr->name beautifier as default for "filename" args
  perf trace: Use the fd->name beautifier as default for "fd" args
  perf report: Add srcline_from/to branch sort keys
  perf evsel: Record fd into perf_mmap
  perf evsel: Add overwrite attribute and check write_backward
  perf tools: Set buildid dir under symfs when --symfs is provided
  perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
  perf annotate: Sort list of recognised instructions
  perf annotate: Fix identification of ARM blt and bls instructions
  perf tools: Fix usage of max_stack sysctl
  perf callchain: Stop validating callchains by the max_stack sysctl
  perf trace: Fix exit_group() formatting
  perf top: Use machine->kptr_restrict_warned
  perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
  perf machine: Do not bail out if not managing to read ref reloc symbol
  perf/x86/intel/p4: Trival indentation fix, remove space
  ...
 2016-05-25 17:05:40 -07:00
Michal Hocko
6904817607 vdso: make arch_setup_additional_pages wait for mmap_sem for write killable 
most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-23 17:04:14 -07:00
Konstantin Khlebnikov
7efb2a7b85 arch/defconfig: remove CONFIG_RESOURCE_COUNTERS 
This option was replaced by PAGE_COUNTER which is selected by MEMCG.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-23 17:04:14 -07:00
Zhaoxiu Zeng
fff7fb0b2d lib/GCD.c: use binary GCD algorithm instead of Euclidean 
The binary GCD algorithm is based on the following facts:
	1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2)
	2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b)
	3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b)

Even on x86 machines with reasonable division hardware, the binary
algorithm runs about 25% faster (80% the execution time) than the
division-based Euclidian algorithm.

On platforms like Alpha and ARMv6 where division is a function call to
emulation code, it's even more significant.

There are two variants of the code here, depending on whether a fast
__ffs (find least significant set bit) instruction is available.  This
allows the unpredictable branches in the bit-at-a-time shifting loop to
be eliminated.

If fast __ffs is not available, the "even/odd" GCD variant is used.

I use the following code to benchmark:

	#include <stdio.h>
	#include <stdlib.h>
	#include <stdint.h>
	#include <string.h>
	#include <time.h>
	#include <unistd.h>

	#define swap(a, b) \
		do { \
			a ^= b; \
			b ^= a; \
			a ^= b; \
		} while (0)

	unsigned long gcd0(unsigned long a, unsigned long b)
	{
		unsigned long r;

		if (a < b) {
			swap(a, b);
		}

		if (b == 0)
			return a;

		while ((r = a % b) != 0) {
			a = b;
			b = r;
		}

		return b;
	}

	unsigned long gcd1(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd2(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	unsigned long gcd3(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);
		if (b == 1)
			return r & -r;

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == 1)
				return r & -r;
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd4(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;
		if (b == r)
			return r;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == r)
				return r;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = {
		gcd0, gcd1, gcd2, gcd3, gcd4,
	};

	#define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0]))

	#if defined(__x86_64__)

	#define rdtscll(val) do { \
		unsigned long __a,__d; \
		__asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \
		(val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \
	} while(0)

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		unsigned long long start, end;
		unsigned long long ret;
		unsigned long gcd_res;

		rdtscll(start);
		gcd_res = gcd(a, b);
		rdtscll(end);

		if (end >= start)
			ret = end - start;
		else
			ret = ~0ULL - start + 1 + end;

		*res = gcd_res;
		return ret;
	}

	#else

	static inline struct timespec read_time(void)
	{
		struct timespec time;
		clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time);
		return time;
	}

	static inline unsigned long long diff_time(struct timespec start, struct timespec end)
	{
		struct timespec temp;

		if ((end.tv_nsec - start.tv_nsec) < 0) {
			temp.tv_sec = end.tv_sec - start.tv_sec - 1;
			temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec;
		} else {
			temp.tv_sec = end.tv_sec - start.tv_sec;
			temp.tv_nsec = end.tv_nsec - start.tv_nsec;
		}

		return temp.tv_sec * 1000000000ULL + temp.tv_nsec;
	}

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		struct timespec start, end;
		unsigned long gcd_res;

		start = read_time();
		gcd_res = gcd(a, b);
		end = read_time();

		*res = gcd_res;
		return diff_time(start, end);
	}

	#endif

	static inline unsigned long get_rand()
	{
		if (sizeof(long) == 8)
			return (unsigned long)rand() << 32 | rand();
		else
			return rand();
	}

	int main(int argc, char **argv)
	{
		unsigned int seed = time(0);
		int loops = 100;
		int repeats = 1000;
		unsigned long (*res)[TEST_ENTRIES];
		unsigned long long elapsed[TEST_ENTRIES];
		int i, j, k;

		for (;;) {
			int opt = getopt(argc, argv, "n:r:s:");
			/* End condition always first */
			if (opt == -1)
				break;

			switch (opt) {
			case 'n':
				loops = atoi(optarg);
				break;
			case 'r':
				repeats = atoi(optarg);
				break;
			case 's':
				seed = strtoul(optarg, NULL, 10);
				break;
			default:
				/* You won't actually get here. */
				break;
			}
		}

		res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops);
		memset(elapsed, 0, sizeof(elapsed));

		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			/* Do we have args? */
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			unsigned long long min_elapsed[TEST_ENTRIES];
			for (k = 0; k < repeats; k++) {
				for (i = 0; i < TEST_ENTRIES; i++) {
					unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]);
					if (k == 0 || min_elapsed[i] > tmp)
						min_elapsed[i] = tmp;
				}
			}
			for (i = 0; i < TEST_ENTRIES; i++)
				elapsed[i] += min_elapsed[i];
		}

		for (i = 0; i < TEST_ENTRIES; i++)
			printf("gcd%d: elapsed %llu\n", i, elapsed[i]);

		k = 0;
		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			for (i = 1; i < TEST_ENTRIES; i++) {
				if (res[j][i] != res[j][0])
					break;
			}
			if (i < TEST_ENTRIES) {
				if (k == 0) {
					k = 1;
					fprintf(stderr, "Error:\n");
				}
				fprintf(stderr, "gcd(%lu, %lu): ", a, b);
				for (i = 0; i < TEST_ENTRIES; i++)
					fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n");
			}
		}

		if (k == 0)
			fprintf(stderr, "PASS\n");

		free(res);

		return 0;
	}

Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got:

  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 10174
  gcd1: elapsed 2120
  gcd2: elapsed 2902
  gcd3: elapsed 2039
  gcd4: elapsed 2812
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9309
  gcd1: elapsed 2280
  gcd2: elapsed 2822
  gcd3: elapsed 2217
  gcd4: elapsed 2710
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9589
  gcd1: elapsed 2098
  gcd2: elapsed 2815
  gcd3: elapsed 2030
  gcd4: elapsed 2718
  PASS
  zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
  gcd0: elapsed 9914
  gcd1: elapsed 2309
  gcd2: elapsed 2779
  gcd3: elapsed 2228
  gcd4: elapsed 2709
  PASS

[akpm@linux-foundation.org: avoid #defining a CONFIG_ variable]
Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-20 17:58:30 -07:00
Petr Mladek
42a0bb3f71 printk/nmi: generic solution for safe printk in NMI 
printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc88093 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-20 17:58:30 -07:00
Jiri Slaby
e64646946e exit_thread: accept a task parameter to be exited 
We need to call exit_thread from copy_process in a fail path.  So make it
accept task_struct as a parameter.

[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
  non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-20 17:58:30 -07:00
Jiri Slaby
5f56a5dfdb exit_thread: remove empty bodies 
Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-20 17:58:30 -07:00
Ingo Molnar
21f77d231f perf/core improvements and fixes: 
User visible:
 
 - Honour the kernel.perf_event_max_stack knob more precisely by not counting
   PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
   the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)
 
 - Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)
 
 - Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)
 
 - Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)
 
 - Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)
 
 - Store vdso buildid unconditionally, as it appears in callchains and
   we're not checking those when creating the build-id table, so we
   end up not being able to resolve VDSO symbols when doing analysis
   on a different machine than the one where recording was done, possibly
   of a different arch even (arm -> x86_64) (He Kuang)
 
 Infrastructure:
 
 - Generalize max_stack sysctl handler, will be used for configuring
   multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)
 
 Cleanups:
 
 - Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
   open coded strings (Masami Hiramatsu)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXOn7eAAoJENZQFvNTUqpAsOAP/3f/XJekPQAnMcKRBp2noCuj
 nRu1kBltVJyP8iOU5PKSJwel4F9ykNNMl+/rzzxHDo13IM8uc+HnZOJZ6e9mJIJ1
 xqjdqM4EDlYYoFApJzCjTK6CMlevCazosdQT1bbmMDYVPc2uQR/GnutFrzqf/Plg
 hEougIGtfrdy85g95CRdxpy2yMwDK4EwsiDRm9ib1hnuamQZl97buWemBVqSJmLY
 p82E2aMU5Fv5+B8AO4I7V88ZmgpmryjxpM+LjffgNUDSKsSHrlG4NiQ3znV1bgst
 Rc++w78+qxoIozOu6/IX8eSI2L/1eyM/yQ6Qre0KuvYXCl+NopTAYSSJlaA4tyHF
 c55z7HucuyATN3PrFRHlbWUT/RMIVC0j0lnZOc7SJLl90hJQ+nv0iZcbYwMbeHu1
 3LGlcd9jDwQYiClbaT9ATxZJ8B9An0/k/HJdatbAHN0wRomP2Ozz/qD2nmEbUwpV
 sCyLOo/LJkvVkuUjSg6ZiOArNIk4iTSPSAUV+SAL6YOEOZMAX5ISUJQ174+zFC9a
 gqtVsCXvwLIsndXb8ys1r9/fit/MUci0OzKX3SG1K765+E4Bk23KcAgMNbM/a7lp
 ZmHDXMC+yBYcnYNnaxkp7c55CWUlKGOeR4e+KmB99KoeIleYgPhD2UM5beo61TmN
 yUEPtiiFiZmTRkiAu83R
 =7OdF
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160516' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Honour the kernel.perf_event_max_stack knob more precisely by not counting
  PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
  the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)

- Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)

- Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)

- Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)

- Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)

- Store vdso buildid unconditionally, as it appears in callchains and
  we're not checking those when creating the build-id table, so we
  end up not being able to resolve VDSO symbols when doing analysis
  on a different machine than the one where recording was done, possibly
  of a different arch even (arm -> x86_64) (He Kuang)

Infrastructure changes:

- Generalize max_stack sysctl handler, will be used for configuring
  multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)

Cleanups:

- Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
  open coded strings (Masami Hiramatsu)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-05-20 08:20:14 +02:00
Linus Torvalds
1eccc6e152 This is the bulk of GPIO changes for kernel cycle v4.7: 
Core infrastructural changes:
 
 - Support for natively single-ended GPIO driver stages. This
   means that if the hardware has registers to configure open
   drain or open source configuration, we use that rather than
   (as we did before) try to emulate it by switching the line
   to an input to get high impedance. This is also documented
   throughly in Documentation/gpio/driver.txt for those of you
   who did not understand one word of what I just wrote.
 
 - Start to do away with the unnecessarily complex and
   unitelligible ARCH_REQUIRE_GPIOLIB and
   ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
   the time when the GPIO subsystem was unmaintained. Archs can
   now just select GPIOLIB and be done with it, cleanups to
   arches will trickle in for the next kernel. Some minor archs
   ACKed the changes immediately so these are included in this
   pull request.
 
 - Advancing the use of the data pointer inside the GPIO device
   for storing driver data by switching the PowerPC, Super-H
   Unicore and a few other subarches or subsystem drivers in
   ALSA SoC, Input, serial, SSB, staging etc to use it.
 
 - The initialization now reads the input/output state of the
   GPIO lines, so that each GPIO descriptor knows - if this
   callback is implemented - whether the line is input or
   output. This also reflects nicely in userspace "lsgpio".
 
 - It is now possible to name GPIO producer names, line names,
   from the device tree. (Platform data has been supported for
   a while.) I bet we will get a similar mechanism for ACPI
   one of those days. This makes is possible to get sensible
   producer names for e.g. GPIO rails in "lsgpio" in userspace.
 
 New drivers:
 
 - New driver for the Loongson1.
 
 - The XLP driver now supports Broadcom Vulcan ARM64.
 
 - The IT87 driver now supports IT8620 and IT8628.
 
 - The PCA953X driver now supports Galileo Gen2.
 
 Driver improvements:
 
 - MCP23S08 was switched to use the gpiolib irqchip helpers and
   now also suppors level-triggered interrupts.
 
 - 74x164 and RCAR now supports the .set_multiple() callback
 
 - AMDPT was converted to use generic GPIO.
 
 - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
   support the new single ended callback for open drain
   and in some cases open source.
 
 - Implement the .get_direction() callback for a few more drivers
   like PL061, Xgene.
 
 Cleanups:
 
 - Paul Gortmaker combed through the drivers and de-modularized
   those who are not really modules.
 
 - Move the GPIO poweroff DT bindings to the power subdir where
   they belong.
 
 - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
   point. That's what it is handling, nothing more, nothing less.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXOuJ5AAoJEEEQszewGV1zNXsQAII5wtkP69WRJ3goYBKg1dZN
 DkuLqZyVI4hCgRhptzUW10gDLHKKOCVubfetTJHSpyG/dWDJXPCyH6FHF+pW6lMX
 y+em8kAvWctKpaosy4EM7O55/IohW0/fNCTOfzfrUNivjydFuA2XwPUiPqC7111O
 DeKlC/t+W1JEvZTiKMi83pKq+9wqhiHmD0qxRHhV57S+MT8e7mdlSKOp7uUkKPkg
 LPlerXosnmeFjL2emuSnKl/tq8pOyruU6uaIGG/uwpbo2W86Dok9GY2GWkQ4pANT
 pDtprc4aJ/Clf6Q0CoKwQbmAozqTDeJo+Und9tRs2KuZRly2bWOcyVE0lyK+Y4s0
 544LcKw2q6cB9ARZ6JExEVRJejPISGKMqo9TaHkyNSIJoiiatKYvNS4WVeFtTgbI
 W+1WfM1svPymNRqVPO1PMLV+3m9dalDH2WjtaFF21uCAQ/G0AuPEHjEDbbx0HIpb
 qrvWmYzZ97Rm/LdYROFRO53nEdCp2jh6c3n4/2kGYM8H0suvGxXZsB1g4i+Dm+B+
 qKVTS282azlDuH9ohXeXizeb6atK6s8TC3Rmew97SmXDO00cUQzEQO/ZquRLHY9r
 n83afQ4OL2Z9yruAxAk7pCshVSyheOsHuFPuZ7bwPW31VMdoWNRkhnaTUXMjGfYg
 3y39IHrCKWNMCCVM1iNl
 =z4d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel cycle v4.7:

  Core infrastructural changes:

   - Support for natively single-ended GPIO driver stages.

     This means that if the hardware has registers to configure open
     drain or open source configuration, we use that rather than (as we
     did before) try to emulate it by switching the line to an input to
     get high impedance.

     This is also documented throughly in Documentation/gpio/driver.txt
     for those of you who did not understand one word of what I just
     wrote.

   - Start to do away with the unnecessarily complex and unitelligible
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
     evolutional artifact from the time when the GPIO subsystem was
     unmaintained.

     Archs can now just select GPIOLIB and be done with it, cleanups to
     arches will trickle in for the next kernel.  Some minor archs ACKed
     the changes immediately so these are included in this pull request.

   - Advancing the use of the data pointer inside the GPIO device for
     storing driver data by switching the PowerPC, Super-H Unicore and
     a few other subarches or subsystem drivers in ALSA SoC, Input,
     serial, SSB, staging etc to use it.

   - The initialization now reads the input/output state of the GPIO
     lines, so that each GPIO descriptor knows - if this callback is
     implemented - whether the line is input or output.  This also
     reflects nicely in userspace "lsgpio".

   - It is now possible to name GPIO producer names, line names, from
     the device tree.  (Platform data has been supported for a while).
     I bet we will get a similar mechanism for ACPI one of those days.
     This makes is possible to get sensible producer names for e.g.
     GPIO rails in "lsgpio" in userspace.

  New drivers:

   - New driver for the Loongson1.

   - The XLP driver now supports Broadcom Vulcan ARM64.

   - The IT87 driver now supports IT8620 and IT8628.

   - The PCA953X driver now supports Galileo Gen2.

  Driver improvements:

   - MCP23S08 was switched to use the gpiolib irqchip helpers and now
     also suppors level-triggered interrupts.

   - 74x164 and RCAR now supports the .set_multiple() callback

   - AMDPT was converted to use generic GPIO.

   - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
     support the new single ended callback for open drain and in some
     cases open source.

   - Implement the .get_direction() callback for a few more drivers like
     PL061, Xgene.

  Cleanups:

   - Paul Gortmaker combed through the drivers and de-modularized those
     who are not really modules.

   - Move the GPIO poweroff DT bindings to the power subdir where they
     belong.

   - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
     point.  That's what it is handling, nothing more, nothing less"

* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
  MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  gpio: zevio: make it explicitly non-modular
  gpio: timberdale: make it explicitly non-modular
  gpio: stmpe: make it explicitly non-modular
  gpio: sodaville: make it explicitly non-modular
  pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
  gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
  gpio: dt-bindings: add wd,mbl-gpio bindings
  gpio: of: make it possible to name GPIO lines
  gpio: make gpiod_to_irq() return negative for NO_IRQ
  gpio: xgene: implement .get_direction()
  gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
  gpio: tegra: Implement gpio_get_direction callback
  gpio: set up initial state from .get_direction()
  gpio: rename gpio-generic.c into gpio-mmio.c
  gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
  gpio: dwapb: add gpio-signaled acpi event support
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: remove name from dwapb_port_property
  gpio/qoriq: select IRQ_DOMAIN
  ...
 2016-05-17 17:39:42 -07:00
Arnaldo Carvalho de Melo
cfbcf46845 perf core: Pass max stack as a perf_callchain_entry context 
This makes perf_callchain_{user,kernel}() receive the max stack
as context for the perf_callchain_entry, instead of accessing
the global sysctl_perf_event_max_stack.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2016-05-16 23:11:50 -03:00
Linus Torvalds
3e21e5dda4 MMC core: 
- Add TRACE support to be able to debug request flow
  - Extend/improve reset support for (e)MMC
  - Convert MMC pwrseq to platform device drivers
  - Use IDA for indexes
  - Some additional minor improvements
 
 MMC host:
  - sdhci: Re-factoring, clean-ups and improvements
  - sdhci-acpi|pci: Use MMC_CAP_AGGRESSIVE_PM for Broxton
  - omap/omap_hsmmc: Convert to use dma_request_chan()
  - usdhi6rol0: Add support for UHS modes
  - sh_mmcif: Update runtime PM support
  - tmio: Wolfram Sang steps in as maintainer
  - tmio: Add UHS-I mode support
  - sh_mobile_sdhi: Add UHS-I mode support
  - tmio/sdhi: Re-factoring, clean-ups and improvements
  - dw_mmc: Re-factoring and clean-ups
  - davinci: Convert to use dma_request_chan()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXObOWAAoJEP4mhCVzWIwp3P4QANEb2z7NgUOw3DTti87r05gj
 N3PNafNIn7EjrtuBenaVNZUkGnjnzVanNYEMArGFIdeVhJ/ZCCJY1fUOK161NUmO
 1zRCOSufD9mRmhNtKb7jKu1YboXPRyKDaPVBTSSVrQPBw699tALGHCyAFvgFFKPD
 RvTPHSvH1vTy0VF50/ao/vl1ci89nxp6PBG/5xe1rorBHH1CYaiPgWtniMqc09Ix
 LiAO8Ox7fNd4WgK1tO56xJgEN2WA+Pbqy/7UabO+OjXoAMbPmO/l8vP0/9MqlBaX
 WZyDVwusQ9VhyDMsQ6tpZa6k8G3u3LOeolZWHKQqHpJYbNuwP+szh4gdJRb838CC
 AIz9UWC35ERn7yYD0aL5ok0TQhf4NJhJZibbGT2zNtnUVaSJnrJsqNtQOtEVLI9v
 KxzSiKsAAC0fGpyvze3/yU4JXc1yJd8EXm1iakF5KYBimC+wzVRqQmuDUPrLjTG5
 iypctu+yqb2OXmKbedsCruJ7nnLYAcGFKAaUSvCxn7AO4e44YEU7VIeWdC+NO6+s
 vf9HNfKwiorw2mkYNcfnJgTjzqXhimOp+94WAOUBMhi1w+OZ1TUlSriTyBbK3s1G
 rb4I37T7oLZIpDitfvmra9ORqNyUr0AlG3728BScN/Rc3731uEIBRd11h32hUoXk
 b8a9ORVfHZHMrv5+5T0N
 =89kT
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add TRACE support to be able to debug request flow
   - Extend/improve reset support for (e)MMC
   - Convert MMC pwrseq to platform device drivers
   - Use IDA for indexes
   - Some additional minor improvements

  MMC host:
   - sdhci: Re-factoring, clean-ups and improvements
   - sdhci-acpi|pci: Use MMC_CAP_AGGRESSIVE_PM for Broxton
   - omap/omap_hsmmc: Convert to use dma_request_chan()
   - usdhi6rol0: Add support for UHS modes
   - sh_mmcif: Update runtime PM support
   - tmio: Wolfram Sang steps in as maintainer
   - tmio: Add UHS-I mode support
   - sh_mobile_sdhi: Add UHS-I mode support
   - tmio/sdhi: Re-factoring, clean-ups and improvements
   - dw_mmc: Re-factoring and clean-ups
   - davinci: Convert to use dma_request_chan()"

* tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc: (99 commits)
  mmc: mmc: Fix partition switch timeout for some eMMCs
  mmc: sh_mobile_sdhi: enable SDIO IRQs for RCar Gen3
  mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards
  mmc: sdhci-st: correct name of sd-uhs-sdr50 property
  MAINTAINERS: update entry for TMIO MMC driver
  mmc: block: improve logging of handling emmc timeouts
  mmc: sdhci: removed unneeded function wrappers
  mmc: core: remove the invalid message in mmc_select_timing
  mmc: core: fix using wrong io voltage if mmc_select_hs200 fails
  mmc: sdhci-of-arasan: fix set_clock when a phy is supported
  mmc: omap: Use dma_request_chan() for requesting DMA channel
  mmc: mmc: Attempt to flush cache before reset
  mmc: sh_mobile_sdhi: check return value when changing clk
  mmc: sh_mobile_sdhi: only change the clock on RCar Gen2+
  mmc: tmio/sdhi: introduce flag for RCar 2+ specific features
  mmc: sh_mobile_sdhi: make clk_update function more compact
  mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel
  mmc: sdhci-of-at91: add presets setup
  mmc: usdhi6rol0: add pinctrl to set pin drive strength
  mmc: usdhi6rol0: add support for UHS modes
  ...
 2016-05-16 19:10:40 -07:00
Linus Torvalds
3469d261ea Merge branch 'locking-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull support for killable rwsems from Ingo Molnar:
 "This, by Michal Hocko, implements down_write_killable().

  The main usecase will be to update mm_sem usage sites to use this new
  API, to allow the mm-reaper introduced in commit aac4536355 ("mm,
  oom: introduce oom reaper") to tear down oom victim address spaces
  asynchronously with minimum latencies and without deadlock worries"

[ The vfs will want it too as the inode lock is changed from a mutex to
  a rwsem due to the parallel lookup and readdir updates ]

* 'locking-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix comment on register clobbering
  locking/rwsem: Fix down_write_killable()
  locking/rwsem, x86: Add frame annotation for call_rwsem_down_write_failed_killable()
  locking/rwsem: Provide down_write_killable()
  locking/rwsem, x86: Provide __down_write_killable()
  locking/rwsem, s390: Provide __down_write_killable()
  locking/rwsem, ia64: Provide __down_write_killable()
  locking/rwsem, alpha: Provide __down_write_killable()
  locking/rwsem: Introduce basis for down_write_killable()
  locking/rwsem, sparc: Drop superfluous arch specific implementation
  locking/rwsem, sh: Drop superfluous arch specific implementation
  locking/rwsem, xtensa: Drop superfluous arch specific implementation
  locking/rwsem: Drop explicit memory barriers
  locking/rwsem: Get rid of __down_write_nested()
 2016-05-16 13:41:02 -07:00
Wolfram Sang
010629436d mmc: sh_mobile_sdhi: remove obsolete include file 
A few SH boards include the file but don't make use of it (no named
interrupts). The SDHI code removed support for this feature as well.
So, drop the references and ultimately remove the unneeded file.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rich Felker <dalias@libc.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 2016-05-02 10:36:04 +02:00
Masahiro Yamada
be1fb0e8eb kbuild: delete unnecessary "@:" 
Since commit 2aedcd098a ('kbuild: suppress annoying "... is up to
date." message'), $(call if_changed,...) is evaluated to "@:"
when there is nothing to do.

We no longer need to add "@:" after $(call if_changed,...) to
suppress "... is up to date." message.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
 2016-04-20 10:36:57 +02:00
Michal Hocko
e4a2b01ed3 locking/rwsem, sh: Drop superfluous arch specific implementation 
Since "locking, rwsem: drop explicit memory barriers" the arch specific
code is basically same as the the generic one so we can drop the
superfluous code.

Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-5-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-04-13 10:42:19 +02:00
Michal Hocko
2e927c6422 locking/rwsem: Drop explicit memory barriers 
sh and xtensa seem to be the only architectures which use explicit
memory barriers for rw_semaphore operations even though they are not
really needed because there is the full memory barrier is always implied
by atomic_{inc,dec,add,sub}_return() resp. cmpxchg(). Remove them.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-3-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-04-13 10:42:18 +02:00
Michal Hocko
f8e04d8545 locking/rwsem: Get rid of __down_write_nested() 
This is no longer used anywhere and all callers (__down_write()) use
0 as a subclass. Ditch __down_write_nested() to make the code easier
to follow.

This shouldn't introduce any functional change.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-2-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2016-04-13 10:42:16 +02:00
Linus Walleij
efed58f1c5 sh: x3proto-gpio: switch to gpiochip_add_data() 
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2016-03-30 10:53:51 +02:00