Commit Graph

120769 Commits

Author SHA1 Message Date
Sanjeev Premi
e178ccb335 mfd: Fix mismatch in twl4030 mutex lock-unlock
A mutex is locked on entry into twl4030_madc_conversion().
Immediate return on some error conditions leaves the
mutex locked.

This patch ensures that mutex is always unlocked before
leaving the function.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:27 +02:00
Randy Dunlap
2b959e7f87 mfd: twl6030-pwm.c needs MODULE_LICENSE
twl6030_pwm: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hemanth V <hemanthv@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:27 +02:00
Keshava Munegowda
e2e49d5719 mfd: Fix the omap-usb-host clock API usage on usbhs_disable()
usbhs_disable function was invoking clk_enable() instead of
clk_disable(), thus only increasing the clock usage counter and
preventing this particular clock from being ever turned off.
Because of this, the power domain of omap4 the USB Host subsystem
would never reach lower power states.This patch calls clk_disable()
in usbhs_disable function

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:27 +02:00
Mark Brown
ccd80c7142 mfd: Acknowledge WM8994 IRQs before reporting
This ensures we never have a window where we've handled an interrupt but
not told the hardware about it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:27 +02:00
Mark Brown
88c939770d mfd: Acknowlege all WM831x IRQs before we handle them
Ensure that we never have a window where we've handled an interrupt (and
therefore need to be notified of new events) but haven't yet told the
interrupt controller that this is the case (so any new events will be
discarded).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:27 +02:00
Jesper Juhl
b1224cd113 mfd: Avoid two assignments if failures happen in tps65910_i2c_probe
In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a
tiny optimization.

We assign to init_data->irq and init_data->irq_base long before we
need them, and there are two potential exits from the function before
they are needed.

Moving the assignments below these two potential exits means we
completely avoid doing them in these two (failure) cases.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Dan Carpenter
6daa663dc4 regulator: Storing tps65912 error codes in u8
get_ctrl_reg() returns -EINVAL so the error handling won't work here
if reg is a u8.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Jesper Juhl
dc7e412d43 mfd: Don't leak init_data in tps65910_i2c_probe
There are a couple of situations where we leak init_data in
drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take
care of them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Jin Park
f7eb6c5e8e regulator: aat2870: Add AAT2870 regulator driver
Add regulator driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Jin Park
4b0d711be3 backlight: Add AAT2870 backlight driver
Add backlight driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Jin Park
09d6292bef mfd: Add AAT2870 mfd driver
Add mfd core driver for AnalogicTech AAT2870.
The AAT2870 is communication through I2C and contains backlight and
regulator components.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:26 +02:00
Jesper Juhl
7785bf11f3 mfd: Remove dead code from max8997-irq
We either hit one of the case's or the default in the switch statement
in get_i2c(), so the 'return ERR_PTR(-EINVAL);' at the end of the
function is just dead code - remove it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:25 +02:00
Linus Walleij
54f323b132 mfd: Move TPS55910 Kconfig option
Having another TPS chip at the end of the Kconfig when all it's
relatives are grouped together in their own section seems totally
counter-intuitive. Move it, also in the Makefile.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:25 +02:00
Om Prakash
4dcaa6b6df mfd: Fix missing stmpe kerneldoc
Generating kerneldoc for STMPE result in warnings, so fix this by
adding missing documentation.

Signed-off-by: Om Prakash <omprakash.pal@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:25 +02:00
Axel Lin
63c8a58d22 mfd: Fix off-by-one value range checking for tps65912_i2c_write
If bytes == (TPS6591X_MAX_REGISTER + 1), we have a buffer overflow when
doing memcpy(&msg[1], src, bytes).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:25 +02:00
Mark Brown
a5e06781f0 mfd: Add devices for WM831x clocking module
With the new generic clk API that should appear at some point we should be
able to support the clocking sensibly in Linux.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:24 +02:00
Axel Lin
2f2233413a mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:24 +02:00
Mark Brown
5608801baf mfd: Don't ask about the TPS65912 core driver in Kconfig
The user has to select the I2C and SPI drivers individually and they select
the core driver for the device so there's no point in presenting the user
with an option for the core driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:24 +02:00
Dimitris Papastamos
08256712a2 mfd: Fix off by one in WM831x IRQ code
The GPIO IRQs aren't the first IRQs defined, we need to subtract the base
for the GPIOs as well to use them for array indexes.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:24 +02:00
Oleg Drokin
59dead5a0c mfd: Add tps65921 support from twl-core
Very similar to TPS65920
List of differences: http://www.ti.com/litv/pdf/swcu066b

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:24 +02:00
Mark Brown
b00cd68eb3 mfd: Ensure value written by wm831x_set_bits() is within the mask
Purely for defensiveness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:23 +02:00
Mark Brown
ec2328c30b mfd: Implement tps65910 IRQ cleanup
The tps65910_irq_exit() cleanup function was generating a warning from
sparse due to the lack of a prototype. This wasn't causing GCC warnings
as the driver wasn't cleaning up its IRQs on exit at all so there was no
use of an unprototyped function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:23 +02:00
Alexander Stein
19921ef612 mfd: Add tunnelcreek watchdog to lpc_sch devices
Tunnel Creek has an additional watchdog core.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:23 +02:00
Linus Walleij
6af75ecd57 mfd: Update ab8500 subdevice list
This synchronize the subdevice entries for the AB8500 MFD driver
with the latest development of subdrivers for things like battery
charging and temperature monitoring.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:23 +02:00
Robert Rosengren
5cef8df5e3 mfd: ab8500-core MFD devices marked as initdata
Internal MFD device structs are marked as __devinitdata since the kernel
will allocate memory for the same when calling mfd_add_devices.

Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
Reviewed-by: Johan Palsson <johan.palsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Margarita Olaya
9260ad98dc tps65912: add regulator driver
The tps65912 consist of 4 DCDCs and 10 LDOs. The output voltages can be
configured by the SPI or I2C interface, they are meant to supply power
to the main processor and other components.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Margarita Olaya
668a6cc710 tps65912: gpio: add gpio driver
TPS65912 has five GPIOs that can be configured for different
purposes.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Margarita Olaya
d49a0f3f14 tps65912: irq: add interrupt controller
This module controls the interrupt handling for the tps65912.
The interrupt sources can be the following:

- GPIO
- PWRON signal
- PWRHOLD signal
- Temperature detection

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Margarita Olaya
36e52873c6 mfd: tps65912: Add new mfd device
The tps65912 chip is a power management IC. It contains the following
components:

- Regulators
- GPIO controller

The core driver is registered as a platform driver, it provides communication
through I2C and SPI interfaces.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:22 +02:00
Peter Huewe
8504d63804 mfd: Use kstrtoul_from_user in ab8500
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Peter Huewe
402fb48700 mfd: Use kstrtoul_from_user in ab3550
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Lars-Peter Clausen
914e6d4e36 mfd: Use generic irq chip for jz4740-adc
Use the generic irq chip framework for implementing the irq chip for
the jz4740-adc driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Mark Brown
f85dbda076 mfd: Fix error handling if BUG() isn't enabled in WM8994
Even if we would've BUG()ed we should still tidy up after ourselves if that
isn't enabled in the kernel config.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Mark Brown
98ae1ccaf6 mfd: Fix WM8994 IRQ register cache restore on resume
When the byte swap was factored out into the per-register I/O functions
the register restore for the IRQ mask cache (which we use and store in
CPU native format for the interrupt handler) was not updated to do a byte
swap when it uses the bulk I/O. Fix this by writing the cache out one
register at a time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Mark Brown
78bb3688ea mfd: Support multiple active WM831x AUXADC conversions
The WM831x AUXADC hardware can schedule multiple conversions at once,
allowing higher performance when more than one source is in use as we
can have the hardware start new conversions without having to wait for
a register write.

Take advantage of this in the interrupt driven case, maintaining a list of
callers that are waiting for AUXADC conversions and completing them all
simultaneously. The external interface of the AUXADC is not changed so
there will be limited use of the feature immediately.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Mark Brown
a2495bc727 mfd: Restructure wm8994-core device revision handling
Switch on the device type before revision since anything we do here will
be device as well as revision specific.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Sascha Hauer
d1738aef38 mfd: Allocate wm835x irq descs dynamically
This allows boards to leave the irq_base field unitialized and
prevents them having to reserve irqs in the platform.
pdata can be optional for irq support now. Without pdata the
driver allocates some free irq range. With pdata and irq_base > 0
the driver allocates exactly the specified irq.
Without pdata the irq defaults to IRQF_TRIGGER_LOW.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Mark Brown
e69b6de181 mfd: Refactor wm831x AUXADC handling into a separate file
In preparation for some additional work on the wm831x AUXADC code move the
support into a separate file. This is a simple code motion patch, there
should be no functional changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Mark Brown
c1a82780b4 mfd: Read wm831x AUXADC conversion results before acknowledging interrupt
Ensure that there's no possibility of loosing an AUXADC interrupt by reading
the conversion result in the IRQ handler when using interrupts. Otherwise
it's possible that under very heavy load a new conversion could be initiated
before the acknowledgement for a previous interrupt has happened.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Mark Brown
5c05a8d1f0 mfd: Support dynamic allocation of IRQ range for wm831x
Use irq_allocate_desc() to get the IRQ range, which turns into a noop on
non-sparse systems. Since all existing users are non-sparse there should
be no compatibility issues.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:19 +02:00
Mark Brown
b9d03d999b mfd: Only register wm831x RTC device if the 32.768kHz crystal is enabled
The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only
be enabled via OTP or InstantConfig, not runtime software) the RTC can't
function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:19 +02:00
Mark Brown
266a5e02fe mfd: Allow touchscreen to be disabled on wm831x devices
Allow platform data to flag the touchscreen as disabled so that if the
touch driver is built in we don't end up causing lots of work by spuriously
detecting touchscreen activity on systems where it isn't in use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:19 +02:00
Mark Brown
eb503dc16b mfd: Implement support for multiple WM831x devices
Systems using this functionality will be uncommon.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:19 +02:00
Mark Brown
ca7a71824a mfd: Fix bus lock interaction for WM831x IRQ set_type() operation
The WM831x IRQ set_type() operation is doing a direct register write when
called but since set_type() is called with the bus lock held this isn't
legal and could cause deadlocks in the IRQ core.

Fix this by posting the updates into an array and syncing in the
bus_sync_unlock() callback.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:19 +02:00
Linus Torvalds
f0d15c96d4 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  gpio-charger: Fix checking return value of request_any_context_irq
  power_supply: MAX17042: Support additional properties
  max8903_charger: Allow platform data to be __initdata
  power_supply: Add charger driver for MAX8998/LP3974
  power_supply: Add charger driver for MAX8997/8966
  max17042_battery: Remove obsolete cleanup for clientdata
  twl4030_charger: Fix warnings
  wm831x_power: Support multiple instances
  wm831x_backup: Support multiple instances
  apm_power: Fix style error in macros
  s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()
  bq20z75: Enable detection after registering
  bq20z75: Add support for external notification
2011-07-31 06:24:50 -10:00
Linus Torvalds
f33c596a2f Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  smc91c92_cs.c: fix bogus compiler warning
  orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002
  hostap_cs: support cards with "Version 01.02" as third product ID
  pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3
  pxa2xx pcmcia - stargate 2 use gpio array.
  pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
  drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
2011-07-31 06:23:08 -10:00
Linus Torvalds
250f8e3db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sungem: fix compile failure caused by trivial #include consolidation
2011-07-30 10:51:11 -10:00
Linus Torvalds
464c9098bb Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...
2011-07-30 08:57:57 -10:00
Linus Torvalds
6c6e3b828b Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (71 commits)
  [SCSI] fcoe: cleanup cpu selection for incoming requests
  [SCSI] fcoe: add fip retry to avoid missing critical keep alive
  [SCSI] libfc: fix warn on in lport retry
  [SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of error
  [SCSI] libfc: cleanup sending SRR request
  [SCSI] libfc: two minor changes in comments
  [SCSI] libfc, fcoe: ignore rx frame with wrong xid info
  [SCSI] libfc: release exchg cache
  [SCSI] libfc: use FC_MAX_ERROR_CNT
  [SCSI] fcoe: remove unused ptype field in fcoe_rcv_info
  [SCSI] bnx2fc: Update copyright and bump version to 1.0.4
  [SCSI] bnx2fc: Tx BDs cache in write tasks
  [SCSI] bnx2fc: Do not arm CQ when there are no CQEs
  [SCSI] bnx2fc: hold tgt lock when calling cmd_release
  [SCSI] bnx2fc: Enable support for sequence level error recovery
  [SCSI] bnx2fc: HSI changes for tape
  [SCSI] bnx2fc: Handle REC_TOV error code from firmware
  [SCSI] bnx2fc: REC/SRR link service request and response handling
  [SCSI] bnx2fc: Support 'sequence cleanup' task
  [SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage
  ...
2011-07-30 08:36:02 -10:00
Linus Torvalds
664a41b8a9 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-30 00:08:53 -07:00