Commit Graph

1028 Commits

Author SHA1 Message Date
Linus Torvalds
1ec5c1867a This is the bulk of GPIO changes for the v4.11 cycle
Core changes:
 
 - Augment fwnode_get_named_gpiod() to configure the GPIO pin
   immediately after requesting it like all other APIs do.
   This is a treewide change also updating all users.
 
 - Pass a GPIO label down to gpiod_request() from
   fwnode_get_named_gpiod(). This makes debugfs and the userspace
   ABI correctly reflect the current in-kernel consumer of a pin
   taken using this abstraction. This is a treewide change also
   updating all users.
 
 - Rename devm_get_gpiod_from_child() to
   devm_fwnode_get_gpiod_from_child() to reflect the fact that this
   function is operating on a fwnode object. This is a treewide
   change also updating all users.
 
 - Make it possible to take multiple GPIOs in a single hog of device
   tree hogs.
 
 - The refactorings switching GPIO chips to use the .set_config()
   callback using standard pin control properties and providing
   a backend into the pin control subsystem that were also merged
   into the pin control tree naturally appear here too.
 
 Testing instrumentation:
 
 - A whole slew of cleanups and improvements to the mockup GPIO
   driver. We now have an extended userspace test exercising the
   subsystem, and we can inject interrupts etc from userspace
   to fully test the core GPIO functionality.
 
 New drivers:
 
 - New driver for the Cortina Systems Gemini GPIO controller.
 
 - New driver for the Exar XR17V352/354/358 chips.
 
 - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.
 
 Driver changes:
 
 - RCAR: set the irqchip parent device, add fine-grained runtime
   PM support.
 
 - pca953x: support optional RESET control line on the chip.
 
 - DaVinci: cleanups and simplifications. Add support for multiple
   instances.
 
 - .set_multiple() and naming of lines on more or less all of the
   ISA/PCI GPIO controllers.
 
 - mcp23s08: refactored to use regmap as a first step to further
   rewrites and modernizations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYrqvqAAoJEEEQszewGV1zoHsP/i1iZBEywR9+yIx/p2/F2mJu
 nriuYFlp0V3FjHQAQ//YCA9+Catri+ZqT5l+BmG/EYdqqikHbziTyS0YArlfrMHv
 OOBfDmfftexvRI/jQAl+X/nIW531ZjYo6ZApFy/2TirTwfkI7DIMi6ujm09fcG5D
 BgCT1KuszbVtyrmhrQvbeEdVKw0qLAgwnn5eOOCQE4KuDB3s7eyal0rJaDEXhpMF
 kH/y6eySs4FChEhAEmCkM6205F5T4c2YFjL1bo5Fkh/WPrVPaKI0Ny16qbaDWU9K
 W9RaJUzf92KIW0MgcRl+r8Lxn+GekN6/jvrxddQ/Ajs/Dkh5r2JCrm7RIC9tBPcJ
 VbLfjL+cMehlSEu9eyxRQcAIeuUYCqkN8ghuVoj9xt/tDtNYsQIcJZtfW1yjmONq
 mFsd5KhfBFgspQkwF4IX3hthaqj8MH4zefQdWzAGPZMGEA1rrx2kVSEdZD3EV4VN
 84qt5Cx9hLllafthJOGjEIZFCjPIpbMRwTQ+fmc+1IB1DgN8Kc5E1FMssKbUEoOK
 2eLquLvd7iNDMidTjoi87YAisW9qnrPeRDywsqeXdQf7fzpB97gX4MQfJ5fJWEYr
 3uHCfu2u4J4cff9ygg8c4ut7ePEjz+ld/sBh9EHicbbryR4I5ZG7Ne1aQhsmb2M5
 dHZSRfQYEQ4Nl7cMJQuh
 =O81I
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...
2017-02-23 08:46:04 -08:00
Dmitry Torokhov
b0c9d043d4 Subsequent immutable branch between MFD and Input due for the v4.11 merge window
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYoXvBAAoJEFGvii+H/HdhPCMP/1KAxTGNt/6405t/5mTf1+Fz
 YtxyLTqZq9cpECYmbFiiyFaP4/VJTLVkesmNbji8RD8pR5UpGLS0f/HLKxs/M9dv
 bOwnk0kRhFiZ0ozE+bEmcNEqUZRPb1uNhaiD2z5qphBQgYGFRDl6TbajSnCi/UaE
 wfcJcDdI29Z/6BYQPSqKhcSQsZSowoVdHA1uIcTJ5Oq5pvnmwL8IVP9Rj++FUafI
 bElqpIZeFffbORKJUjRpp6vmhB2IDcmBxj5aayB6Q4ItbuQ17yzBI5Mgy+j+6/dc
 Q+k5JKLwskMk4uoDKka0RYODtmrEjxnIz+6EzDvQbk14EZ5duDfecNaCaE0RAcXC
 0O5VAdBifygjI+QuV9Wu5FaOhwl+1cxcecRtq0YEutbPYl1UHERRG88Ys1xOIHpg
 jGQB06JVbwzQ1a2BkGZRBIGhv1cSEIcEM9mQ1Iq6ZKrsqdma60dqgsYb/dQ7Fn6E
 4Tk+WZsaPjM2bwOKU4xjm/itO1tYdNA2mOy+K8EXgMq5XrwuinderJpdhx/Lg5Z8
 h2Qv10LixZA61gotJ8TNKJF1KaHEGudfqfvt+iUn0LxtXJ3dDuiRxmVuGTZrdNN3
 0RmmjF0A5GzZ2JBPV+p3lZksWNP7yvm2btANNuAquwlkupEVhc3YY8hcKkgKC6dM
 0r9rh75NxpdQ9bl22QUP
 =wmTw
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-input-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge in cros-ec changes applied through MFD branch to resolve
conflicts.
2017-02-15 09:24:23 -08:00
Gwendal Grignou
6ccc3a3381 input: cros_ec_keyb: Add Tablet Mode switch
Add switch to report tablet mode.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13 09:25:19 +00:00
Douglas Anderson
cdd7950e7a input: cros_ec_keyb: Add non-matrix buttons and switches
On some newer boards using mkbp we're hooking up non-matrix buttons and
switches to the EC but NOT to the main application processor.

Let's add kernel support to handle this.  Rather than creating a whole
new input driver, we'll continue to use cros_ec_keyb and just report the
new keys.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-08 11:36:23 +00:00
Boris Brezillon
4b0947974e gpio: Rename devm_get_gpiod_from_child()
Rename devm_get_gpiod_from_child() into
devm_fwnode_get_gpiod_from_child() to reflect the fact that this
function is operating on a fwnode object.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04 21:27:26 +01:00
Dmitry Torokhov
8b1a315b35 Input: tca8418 - switch to using generic device properties
Let's drop legacy platform data support (there are no users in mainline)
and switch to using generic device properties, which will make the driver
simpler (non-OF boards can use property sets to describe hardware).

Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:49 -08:00
Dmitry Torokhov
aef01aad89 Input: matrix-keypad - switch to using generic device properties
Instead of being OF-specific, let's switch to using generic device
properties, which will make this code usable on ACPI, device tree and
legacy boards that use property sets.

As part of the change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:48 -08:00
Alexander Stein
b2987d7438 gpio: Pass GPIO label down to gpiod_request
Currently all users of fwnode_get_named_gpiod() have no way to
specify a label for the GPIO. So GPIOs listed in debugfs are shown
with label "?". With this change a proper label is used.

Also adjust all users so they can pass a label, properly retrieved
from device tree properties.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26 09:59:52 +01:00
Andy Shevchenko
a264d10ff4 gpiolib: Convert fwnode_get_named_gpiod() to configure GPIO
Make fwnode_get_named_gpiod() consistent with the rest of
gpiod_get() like API, i.e. configure GPIO pin immediately after
request.

Besides obvious clean up it will help to configure pins based
on firmware provided resources.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26 09:59:32 +01:00
Dmitry Torokhov
0cce284537 Linux 4.10-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYhRv9AAoJEHm+PkMAQRiG/uAH+wYT9qwvT460pUC6F1X5PNdN
 H5KvaGsRNP1SjjQid5CrAFFDs52pFKf9GoV0Rn2WRoHAmEF1Dps4y/bMtR1GlsRB
 IfOU+bnmH1Mmj4RCXUoFgFgYJVXC0WOz9SM5aCOAAZLCRF9BdkTpRo8lijuh141k
 7YMqpaRhr/rJvQRZMEX+Q8HhfyNHz53olrykYp+O4x5F/CUihFzH76pY28j0YihS
 wd/DdxrWyFn35DcFGfDb3yK7J2a6pGtnFw3RP4gU8DsH/Ks0133cR/2lOAtGDECN
 dAGbLHoTvj3L4Twz5aiH6WRkXUkfDLK9UhxD/82UgLLmP5XvG1RdKZUNQ60CL5g=
 =2TBu
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc5' into next

Sync up with mainline to bring up improvements in various subsystems.
2017-01-24 12:37:43 -08:00
Guenter Roeck
14fdb924af Input: keyboard - drop unnecessary calls to input_set_drvdata
If there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:25 -08:00
Guenter Roeck
de3a00ef21 Input: keyboard - drop unnecessary calls to device_init_wakeup
Calling device_init_wakeup in the remove function is unnecessary since the
device is going away, and thus won't be able to cause any wakeups under any
circumstances. Besides, the driver cleanup code already handles the
necessary cleanup.

Similarly, disabling wakeup in the probe error path is unnecessary, as is
disabling wakeup in the probe function in the first place.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21 23:53:19 -08:00
Guenter Roeck
b4e66e7d19 Input: keyboard - use local variables consistently
If a function declares a variable to access a structure element,
use it consistently.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21 23:51:54 -08:00
Guenter Roeck
666c0b8366 Input: keyboard - drop calls to platform_set_drvdata and i2c_set_clientdata
There is no call to i2c_get_clientdata(), platform_get_drvdata(),
or dev_get_drvdata() in any of the drivers in this patch.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21 23:51:49 -08:00
Hans de Goede
83e4947a56 Input: gpio-keys - add support for setkeycode
gpio-keys input devices created by the soc_button_array driver are
configured with key-codes based on ACPI provided information.

Unfortunately on some tablets this info is wrong, and we need to have
a quirk to fix things up.

Add support for input_setkeycode to the gpio-keys driver, so that
the existing udev hwdb mechanism can be used to fix things up on these
tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21 11:46:53 -08:00
Jaechul Lee
72d1f2346d Input: tm2-touchkey - add touchkey driver support for TM2
This patch adds support for the TM2 touch key and led functionality.

The driver interfaces with userspace through an input device and reports
KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by
"/sys/class/leds/tm2-touchkey/brightness".

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18 14:50:23 -08:00
Guenter Roeck
8beb7172b4 Input: bcm-keypad - drop unnecessary call to platform_set_drvdata
There is no call to platform_get_drvdata() or dev_get_drvdata().
Drop the unnecessary call to platform_set_drvdata().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18 11:49:22 -08:00
Guenter Roeck
e634d08dec Input: twl4030_keypad - drop unnecessary call to platform_set_drvdata
There is no call to platform_get_drvdata() or dev_get_drvdata().
Drop the unnecessary call to platform_set_drvdata().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18 11:49:20 -08:00
Guenter Roeck
2057e15945 Input: cros_ec_keyb - drop unnecessary call to dev_set_drvdata and other changes
There is no call to platform_get_drvdata() or dev_get_drvdata().
Drop the unnecessary call to dev_set_drvdata().
Other relevant changes:
  Use existing variable 'dev' instead of dereferencing it several times

This conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop dev_set_drvdata()
- Use local variable 'struct device *dev' consistently

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18 11:33:00 -08:00
Maxime Ripard
259b77ef85 Input: tca8418 - use the interrupt trigger from the device tree
The TCA8418 might be used using different interrupt triggers on various
boards. This is not working so far because the current code forces a
falling edge trigger.

The device tree already provides a trigger type, so let's use whatever it
sets up, and since we can be loaded without DT, keep the old behaviour for
the non-DT case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-17 14:17:39 -08:00
Akinobu Mita
de901cc31d Input: mpr121 - switch to device tree probe
This driver currently only supports legacy platform data probe.  This
change adds device tree support and gets rid of platform data probe code
since no one is actually using mpr121 platform data in the mainline.

The device tree property parsing code is based on the work of
atmel_captouch driver.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15 15:08:46 -08:00
Akinobu Mita
08fea55e37 Input: mpr121 - handle multiple bits change of status register
This driver reports input events on their interrupts which are triggered
by the sensor's status register changes.  But only single bit change is
reported in the interrupt handler.  So if there are multiple bits are
changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15 15:08:44 -08:00
Akinobu Mita
9723ddc8fe Input: mpr121 - set missing event capability
This driver reports misc scan input events on the sensor's status
register changes.  But the event capability for them was not set in the
device initialization, so these events were ignored.

This change adds the missing event capability.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15 15:08:43 -08:00
Akinobu Mita
a4b1aeb726 Input: mpr121 - remove unused field in struct mpr121_touchkey
Remove unused key_val field in struct mpr121_touchkey.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15 15:08:42 -08:00
Akinobu Mita
890fa16762 Input: mpr121 - annotate PM methods as __maybe_unused
Instead of using #ifdef, let's mark suspend and resume methods as
__maybe_unused to provide better compile coverage.

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15 15:08:40 -08:00
Linus Torvalds
af79ce47ef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:

 - updated support for Synaptics RMI4 devices, including support for
   SMBus controllers, firmware update support, sensor tuning, and PS/2
   guest support

 - ALPS driver now supports tracksticks on SS5 controllers

 - i8042 now uses chassis info to skip selftest on Asus laptops as list
   of individual models became too unwieldy

 - miscellaneous fixes to other drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits)
  Input: imx6ul_tsc - generalize the averaging property
  Input: drv260x - use generic device properties
  Input: drv260x - use temporary for &client->dev
  Input: drv260x - fix input device's parent assignment
  Input: synaptics-rmi4 - add support for F34 V7 bootloader
  Input: drv260x - fix initializing overdrive voltage
  Input: ALPS - fix protcol -> protocol
  Input: i8042 - comment #else/#endif of CONFIG_PNP
  Input: lpc32xx-keys - fix invalid error handling of a requested irq
  Input: synaptics-rmi4 - fix debug for sensor clip
  Input: synaptics-rmi4 - store the attn data in the driver
  Input: synaptics-rmi4 - allow to add attention data
  Input: synaptics-rmi4 - f03 - grab data passed by transport device
  Input: synaptics-rmi4 - add support for F03
  Input: imx6ul_tsc - convert int to u32
  Input: imx6ul_tsc - add mask when set REG_ADC_CFG
  Input: synaptics-rmi4 - have only one struct platform data
  Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions
  Input: synaptics-rmi4 - remove mutex calls while updating the firmware
  Input: drv2667 - fix misuse of regmap_update_bits
  ...
2016-12-17 16:45:00 -08:00
Vladimir Zapolskiy
951a086437 Input: lpc32xx-keys - fix invalid error handling of a requested irq
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option
disabled or enabled, in the latter case IRQs are allocated starting
at least from the value specified by NR_IRQS and going upwards, so
the check of (irq >= NR_IRQ) to decide about an error code returned by
platform_get_irq() is completely invalid, don't attempt to overrule
irq subsystem in the driver.

The change fixes lpc32xx_keys driver initialization on boot:

  lpc32xx_keys 40050000.key: failed to get platform irq
  lpc32xx_keys: probe of 40050000.key failed with error -22

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07 19:21:05 -08:00
Sudeep Holla
dadbb0aa36 Input: gpio_keys - set input direction explicitly
Commit 700a38b27e ("Input: gpio_keys - switch to using generic device
properties") switched to use generic device properties for GPIO keys and
commit 5feeca3c1e ("Input: gpio_keys - add support for GPIO descriptors")
switched from legacy GPIO numbers to GPIO descriptors.

Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag
to set the GPIO direction as input. However devm_get_gpiod_from_child
doesn't have such provisions and hence fwnode_get_named_gpiod can't set
it as input.

This breaks few platforms with the following error:
" gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
  unable to lock HW IRQ <n> for IRQ
  genirq: Failed to request resources for POWER (irq <x>) on irqchip
  gpio_keys: Unable to claim irq <x>; error -22
  gpio-keys: probe failed with error -22 "

This patch fixes the issue by setting input direction explicitly for
gpio lines described by generic properties.

Fixes: 700a38b27e ("Input: gpio_keys - switch to using generic device properties")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-17 09:16:33 -08:00
Dmitry Torokhov
700a38b27e Input: gpio_keys - switch to using generic device properties
Make use of the device property API in this driver so that both OF based
systems and ACPI based systems can use this driver.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:32 -08:00
Geert Uytterhoeven
5feeca3c1e Input: gpio_keys - add support for GPIO descriptors
GPIO descriptors are the preferred way over legacy GPIO numbers
nowadays. Convert the driver to use GPIO descriptors internally but
still allow passing legacy GPIO numbers from platform data to support
existing platforms.

Based on commits 633a21d80b ("input: gpio_keys_polled: Add support
for GPIO descriptors") and 1ae5ddb6f8 ("Input: gpio_keys_polled -
request GPIO pin as input.").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:31 -08:00
Dmitry Torokhov
0860913b02 Input: gpio_keys - fix leaking DT node references
for_each_available_child_of_node(node, pp) takes reference to 'pp' and
drops it when attempting next iteration. However if we exit the loop early
we need to drop the reference ourselves.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:30 -08:00
Dmitry Torokhov
f9645f2258 Input: gpio_keys - annotate PM methods as __maybe_unused
Instead of using #ifdef, let's mark suspend and resume methods as
__maybe_unused to provide better compile coverage.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:30 -08:00
Dmitry Torokhov
ea6aabf877 Input: gpio_keys_polled - always use gpiod_get_value_cansleep
It does not matter if given GPIO may sleep or not when reading state,
polling is always done in a non-atomic context, so we should always
be able to simply use gpiod_get_value_cansleep().

Also let's note in the logs when we fail to read gpio state.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:29 -08:00
Dmitry Torokhov
0f78ba96bb Input: gpio_keys_polled - keep button data constant
Commit 633a21d80b ("input: gpio_keys_polled: Add support for GPIO
descriptors") placed gpio descriptor into gpio_keys_button structure, which
is supposed to be part of platform data and not modifiable by the driver.
To keep the data constant, let's move the descriptor to
gpio_keys_button_data structure instead.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07 16:24:29 -08:00
Arnd Bergmann
ea4348c846 Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning
Older versions of gcc warn about the tca8418_irq_handler function
as they can't keep track of the variable assignment inside of the
loop when using the -Wmaybe-unintialized flag:

drivers/input/keyboard/tca8418_keypad.c: In function ‘tca8418_irq_handler’:
drivers/input/keyboard/tca8418_keypad.c:172:9: error: ‘reg’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/input/keyboard/tca8418_keypad.c:165:5: note: ‘reg’ was declared here

This is fixed in gcc-6, but it's possible to rearrange the code
in a way that avoids the warning on older compilers as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26 16:01:18 -07:00
Colin Ian King
6d86c4714d Input: pxa27x_keypad - fix typo "debpunce" -> "debounce"
Trivial fix to typo in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26 16:01:15 -07:00
Dmitry Torokhov
4a7126a25b Linux 4.8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJX8Zc4AAoJEHm+PkMAQRiGQG8H/2Hd4IwJh75snGY5LAiWt6ra
 kGM/SobvLAMtcoxXCeHqf2bZrxa2Zz9tnEzhuLMGaf9a3l79xHa8YumK5KS1JPGV
 6lZBvuPi8BIyT0cpYH000e5ehHfhP6pSGJKZ2EuLv43HcBeVZEGAf3/8jSAlNA15
 bwFy2ZEkwJGThbnT6au0Y3s9h8LcNjtllu9hjfb+/9oNGvp8r4QhdVodIqIQ4cv6
 SeUfv7Pn2LZDMCSaTP9bh2KaR4dwYZHFsVe75x2wND5Sfq7DVBBfFkAoV/RwJDTM
 gBc3PNnmzb/tix6ohOrSQnSiGsXv1uASxvHH3RD2zG6g7Aj9Eq/+Z7ZdPu2+o+U=
 =U+ef
 -----END PGP SIGNATURE-----

Merge tag 'v4.8' into next

Sync up with mainline to bring in I2C host notify changes and other
updates.
2016-10-13 17:25:40 -07:00
Linus Torvalds
d4e65476bc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "You will get

   - a new driver for Elan eKTF2127 touchscreen controllers

   - a new "gpio-decoder" driver to read and report state of several
     GPIO lines

   - an ADC resistor ladder driver

   - the ft6326 driver is removed because edt-ft5x06 handles the same
     devices just fine.

  .. plus the regular slew of driver fixes/enhancements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()
  Input: ektf2127 - mark PM functions as __maybe_unused
  Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
  Input: add support for Elan eKTF2127 touchscreen controller
  Input: serio - add hangup support
  Input: tps65218-pwrbutton - add support for tps65217 variant
  Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes
  Input: jornada720_kbd - remove unneeded mach/hardware.h include
  Input: focaltech - mark focaltech_set_resolution() static
  Input: wdt87xx_i2c - fix the flash erase issue
  Input: gpio-keys-polled - don't use unit-address with button nodes
  Input: add generic input driver to read encoded GPIO lines
  Input: add ADC resistor ladder driver
  Input: pegasus_notetaker - directly include workqueue header
  Input: elants_i2c - get product id on recovery mode for FW update
  Input: wm97xx - remove deprecated create_singletheread_workqueue
  Input: mc13783_ts - remove deprecated create_singletheread_workqueue
  Input: psmouse - remove deprecated create_singletheread_workqueue
  Input: jornada720_kbd - switch to using dev_dbg
  Input: jornada720_kbd - get rid of mach/irqs.h include
  ...
2016-10-07 09:12:19 -07:00
Linus Torvalds
d042380886 - Core Frameworks
- Add the MFD bindings doc to MAINTAINERS
 
 - New Drivers
    - X-Powers AC100 Audio CODEC and RTC
    - TI LP873x PMIC
    - Rockchip RK808 PMIC
    - Samsung Exynos Low Power Audio
 
  - New Device Support
    - Add support for STMPE1600 variant to stmpe
    - Add support for PM8018 PMIC to pm8921-core
    - Add support for AXP806 PMIC in axp20x
    - Add support for AXP209 GPIO in axp20x
 
  - New Functionality
    - Add support for Reset to all STMPE variants
    - Add support for MKBP event support to cros_ec
    - Add support for USB to intel_soc_pmic_bxtwc
    - Add support for IRQs and Power Button to tps65217
 
  - Fix-ups
    - Clean-up defunct author emails; da9063, max14577
    - Kconfig fixups; wm8350-i2c, as3722
    - Constify; altera-a10sr, sm501
    - Supply PCI IDs; intel-lpss-pci
    - Improve clocking; qcom_rpm
    - Fix IRQ probing; ucb1x00-core
    - Ensure fault log is cleared; da9052
    - Remove NO_IRQ check; ucb1x00-core
    - Supply I2C properties; intel-lpss-acpi, intel-lpss-pci
    - Non standard declaration; tps65217, max8997-irq
    - Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs,
                          cros_ec_spi
    - Make non-modular; altera-a10sr, intel_msic, smsc-ece1099,
                        sun6i-prcm, twl-core,
    - OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808,
                   axp20x, lp873x, exynos5433-lpass, act8945a,
                   aspeed-scu, twl6040, arizona
 
  - Bug Fixes
    - Release OF pointer; qcom_rpm
    - Avoid double shifting in suspend/resume; 88pm80x
    - Fix 'defined but not used' error; exynos-lpass
    - Fix 'sleeping whilst attomic'; atmel-hlcdc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJX9giOAAoJEFGvii+H/Hdh8aEP/iiHosBZsksZ4we8KAdoXkxi
 x5nnJvS9+4b5yaasSiN8e2xs9YMOlHu1CNZDZ3RJZ+rLusdVeg5ju5p5WED83pvi
 ltiPMhyqruM3d0rieTRHxeJFmmEf2exwKV3Y+5lo9586dFfJrmGp2AxScId4TtwP
 CcsjwYRx/WvVfWrv1xWsjd9b1RDlWglt3dcVhdKAQbvPPOy5O4ymXNMFs0DuFyZ+
 2A16sw7hdYenXSvAHlZzS5IqXP9JEeosu3O/mUUZKF3PO55t+KbQBGZiwXoal4gp
 1dwrdBjlrZaHcDa5Ra9x+jQ2kxIkyUT44CXKAHa7llTfZQkZIgnv/fWUhB8C5JxU
 iaqnN9rWQ2MNjt3Us/n1TSJH2kEnSNbzrQixE0n8yjIBsZePWlW2ZpWYRF7GPG2i
 2pB8oNz/NdDkKWdosR3ArnseNOKVcC+GtD+mHk0aKMPghPq+gDIRrdM0CFyWeIZE
 w/Cf+HHZPR0O1VuYZ9bHIhbgnEbz5xUADOtBAdppIBQiNEI/G9lJpG6Ft4FTQoPi
 CIbnnB/wxxMaEl85rUPYGkxQniuUI5f0tMv3k2ZtAZMKcqn6iXtiIOuXceM2vUdy
 ze1uddH4HuHLcrJT5x+J72XJL6RXzZKxOqd0b7BcXnvMVFJrWgleH1JQ2WqazAEW
 il1u28IkFusm/BW/0dps
 =Ja7p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...
2016-10-07 08:35:35 -07:00
Dmitry Torokhov
c758f96a8c Merge branch 'next' into for-linus
Prepare first round of input updates for 4.9 merge window.
2016-10-03 16:42:21 -07:00
Axel Lin
d095c500fd Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
Current code uses devm_input_allocate_device() so don't explicitly call
input_free_device if input_register_device fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26 20:01:59 -07:00
Russell King
72f6d0b9ea Input: jornada720_kbd - remove unneeded mach/hardware.h include
The Jornada720 keyboard driver does not make use of anything from the
mach/hardware.h header, so this header can be removed.

Tested-by: Adam Wysocki <armlinux@chmurka.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10 10:47:47 -07:00
Vic Yang
44051a6825 Input: cros_ec_keyb: Stop handling interrupts directly
Because events other that keyboard ones will be handled by now on by
other drivers, stop directly handling interrupts and instead listen to
the new notifier in the MFD driver.

Signed-off-by: Vic Yang <victoryang@google.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 10:51:09 +01:00
Alexandre Belloni
680772647d Input: add ADC resistor ladder driver
A common way of multiplexing buttons on a single input in cheap devices is
to use a resistor ladder on an ADC. This driver supports that configuration
by polling an ADC channel provided by IIO.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-29 20:00:58 -07:00
Linus Torvalds
b09c412aa4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
 "Simply small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - remove redundant regulator_disable call
  Input: synaptics-rmi4 - fix register descriptor subpacket map construction
  Input: tegra-kbc - fix inverted reset logic
  Input: silead - use devm_gpiod_get
  Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
2016-08-26 18:36:23 -07:00
Dmitry Torokhov
99ff4d3af8 Input: jornada720_kbd - switch to using dev_dbg
Switch to using dev_dbg instead of naked printk so that output is uniform
with the other driver messages in the kernel.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22 14:17:19 -07:00
Russell King
0f631d87d9 Input: jornada720_kbd - get rid of mach/irqs.h include
Switch the jornada720 keyboard driver to obtain its interrupt from the
platform device, rather than via a hard-coded interrupt number obtained
from the mach/irqs.h header.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22 14:17:17 -07:00
Russell King
a8a7bdc598 Input: jornada720_kbd - switch to devm_* APIs
Switch the jornada720_kbd driver to use the devm_* APIs.  This is in
preparation to removing the mach/irqs.h include from this driver.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22 14:17:16 -07:00
Masahiro Yamada
fae16989be Input: tegra-kbc - fix inverted reset logic
Commit fe6b0dfaba ("Input: tegra-kbc - use reset framework")
accidentally converted _deassert to _assert, so there is no code
to wake up this hardware.

Fixes: fe6b0dfaba ("Input: tegra-kbc - use reset framework")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22 14:14:45 -07:00
Linus Torvalds
39fada5527 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
 "Two new drivers for touchscreen controllers:

   - Silead touchscreen controllers
   - SiS 9200 family touchscreen controllers

  and a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: silead - remove some dead code
  Input: sis-i2c - select CONFIG_CRC_ITU_T
  Input: add driver for SiS 9200 family I2C touchscreen controllers
  Input: ili210x - fix permissions on "calibrate" attribute
  Input: elan_i2c - properly wake up touchpad on ASUS laptops
  Input: add driver for Silead touchscreens
  Input: elantech - fix debug dump of the current packet
  Input: rotary_encoder - support binary encoding of states
  Input: xpad - power off wireless 360 controllers on suspend
  Input: i8042 - break load dependency between atkbd/psmouse and i8042
  Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
  Input: cros_ec_keyb - cleanup use of dev
2016-08-05 23:24:15 -04:00