David reported that perf report for i686 target data on x86_64 host
failed to work because it tried to find out cross-compiled objdump.
However objdump for x86_64 is compatible to i686 so that it doesn't need
to do it at all. To prevent similar artifacts, normalize arch name when
comparing host and file architectures.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding test to validate perf_event_attr data for command:
'stat'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding test to validate perf_event_attr data for command:
'record group -e {cycles,instructions}'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test attr suite is run only if it's run under perf source directory,
or tests are found in installed path.
Otherwise tests are omitted (notification is displayed) and finished as
successful.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idea is run perf session with kidnapping sys_perf_event_open
function. For each sys_perf_event_open call we store the perf_event_attr
data to the file to be checked later against what we expect.
You can run this by:
$ python ./tests/attr.py -d ./tests/attr/ -p ./perf -v
v2 changes:
- preserve errno value in the hook
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121031145247.GB1027@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As 'perf top' has no data files to run scripts against. Also add a
is_report_browser() helper function to judge whether the running browser
is for 'perf report'.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351699257-5102-1-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the browser still shows the abort label.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351643663-23828-18-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If git is installed we'll have a 'perf --version' output of this form:
$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.rc3.g3afad6
Now on a machine without git installed:
$ mv /home/acme/bin/git /home/acme/bin/git.OFF
$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.0-rc2
That is, no error message due to git not being installed will appear on the
screen and instead the version string in the top level Makefile will be
used.
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-am6yp6phvxyjmyndxogpunjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's another source of overhead in the perf version string generator:
git update-index -q --refresh
... which will iterate the whole checked out tree. This can be pretty
slow on NFS volumes, but takes some time even with local SSD disks and a
fully cached kernel tree:
$ perf stat --null --repeat 3 --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):
0.306999221 seconds time elapsed ( +- 0.56% )
So remove the .dirty differentiator as well - it adds little information
because locally patched git trees are common, but seldom are the perf
tools modified.
So a lot of version strings are reported as 'dirty' while in fact they
are pristine perf builds. For example 99% of my perf builds are not
patched but the kernel tree is slightly patched, which adds the .dirty
tag.
Eliminating that tag speeds up version generation by another order of
magnitude:
$ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
PERF_VERSION = 3.7.rc3.g4b0bd3
PERF_VERSION = 3.7.rc3.g4b0bd3
PERF_VERSION = 3.7.rc3.g4b0bd3
Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):
0.021270923 seconds time elapsed ( +- 1.94% )
(Also clean up some of the comments around this code.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030085441.GC8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building perf is pretty slow on trees that have a lot of commits
relative to the nearest Git tag. This slowness manifests itself during
version string generation:
$ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
PERF_VERSION = 3.7.rc3.1458.g5399b3b
PERF_VERSION = 3.7.rc3.1458.g5399b3b
PERF_VERSION = 3.7.rc3.1458.g5399b3b
Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):
2.857503976 seconds time elapsed ( +- 0.22% )
The build can be even slower than that, when one over NFS volumes.
The reason for the slowness is that util/PERF-VERSION-GEN uses "git
describe" to generate the string, which has to count the "number of
commits distance" from the nearest tag - the ".1458." count in the
output above. For that Git had to extract and decompress 1458 Git
objects, which takes time and bandwidth.
But this "number of commits" value is mostly irrelevant in practice. We
either want to know an approximate tag name, or we want to know the
precise sha1.
So this patch simplifies the version string to:
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
which speeds up the version string generation script by an order of
magnitude:
$ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
PERF_VERSION = 3.7.rc3.g5399b3b.dirty
Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):
0.307633559 seconds time elapsed ( +- 0.84% )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030084600.GB8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without defining ARCH=arm, building perf for Android ARM will fail,
because it needs architecture specific files.
So add related relevant information to the android documentation.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351518066-4791-1-git-send-email-js1304@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf detects no libelf during the build, it'll use internal mini
elf parser instead of libelf. But as it only supports minimal
functionalities, it also disables support to 'probe' builtin command.
Currently it didn't warned to user. Fix it.
$ sudo apt-get remove libelf-dev
$ make
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
CHK bionic
CHK libelf
CHK glibc
Makefile:491: No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev
CHK libunwind
CHK libaudit
$ make NO_LIBELF=1
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
CHK bionic
CHK libaudit
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8ww8zc4hhpxabfskxs3u5ede@git.kernel.org
[ committer note: The package needed is elfutils-libelf-devel, not elfutils-devel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 0c1fe6b:
'perf tools: Have the page size value available for all tools'
Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.
Fix it by initializing it on the binding init routine.
Reported-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mmap_pages default value is not power of 2 (UINT_MAX).
Together with perf_evlist__mmap function returning error value different
from EPERM, we get misleading error message: "--mmap_pages/-m value must
be a power of two."
Fixing this by adding extra check for UINT_MAX value for this error
condition.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350743599-4805-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this function, other modules can basically check whether a file is
a legal perf data file by checking its first 8 bytes against all
possible perf magic numbers.
Change the function name from check_perf_magic to more meaningful
is_perf_magic as suggested by acme.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-7-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Integrate the script browser into "perf report" framework, users can use
function key 'r' or the drop down menu to list all perf scripts and
select one of them, just like they did for the annotation.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-6-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Integrate the script browser into annotation, users can press function
key 'r' to list all perf scripts and select one of them to run that
script, the output will be shown in a separate browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-5-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a script browser, so that user can check all the available
scripts for current perf data file and run them inside the main perf
report or annotation browsers, for all perf samples or for samples
belong to one thread/symbol.
Please be noted: current script browser is only for report use, and
doesn't cover the record phase, IOW it must run against one existing
perf data file.
The work flow is, users can use function key to list all the available
scripts for current perf data file in system and chose one, which will
be executed with popen("perf script -s xxx.xx",) and all the output
lines are put into one ui browser, pressing 'q' or left arrow key will
make it return to previous browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-4-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As suggested by Arnaldo, many scripts have their own usages and need
capture specific events or tracepoints, so only those scripts whose
target events match the events in current perf data file should be
listed in the script browser menu.
This patch will add the event match checking, by opening "xxx-record"
script to cherry pick out all events name and comparing them with
those inside the perf data file.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-3-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.
Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:
1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.
2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving dso_* related functions into dso object.
Keeping symbol loading related functions still in the symbol object as
it seems more convenient.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving BUILD_ID_SIZE define into build-id object, plus include related
changes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of parse_events usually have their own error handling. Move
the fprintf for a bad event to parse_events_options, which is the only
one who should need it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351283415-13170-25-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.
So provide --pre and --post command hooks to allow doing just that.
perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
-- make -s -j64 O=defconfig-build/ bzImage
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise they will be not written in an output file.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-5-git-send-email-avagin@openvz.org
[ committer note: Fixed up wrt changes made in the immediate previous patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
You may want to know where and how long a task is sleeping. A callchain
may be found in sched_switch and a time slice in stat_iowait, so I add
handler in perf inject for merging this events.
My code saves sched_switch event for each process and when it meets
stat_iowait, it reports the sched_switch event, because this event
contains a correct callchain. By another words it replaces all
stat_iowait events on proper sched_switch events.
I use the next sequence of commands for testing:
perf record -e sched:sched_stat_sleep -e sched:sched_switch \
-e sched:sched_process_exit -g -o ~/perf.data.raw \
~/test-program
perf inject -v -s -i ~/perf.data.raw -o ~/perf.data
perf report --stdio -i ~/perf.data
100.00% foo [kernel.kallsyms] [k] __schedule
|
--- __schedule
schedule
|
|--79.75%-- schedule_hrtimeout_range_clock
| schedule_hrtimeout_range
| poll_schedule_timeout
| do_select
| core_sys_select
| sys_select
| system_call_fastpath
| __select
| __libc_start_main
|
--20.25%-- do_nanosleep
hrtimer_nanosleep
sys_nanosleep
system_call_fastpath
__GI___libc_nanosleep
__libc_start_main
And here is test-program.c:
#include<unistd.h>
#include<time.h>
#include<sys/select.h>
int main()
{
struct timespec ts1;
struct timeval tv1;
int i;
long s;
for (i = 0; i < 10; i++) {
ts1.tv_sec = 0;
ts1.tv_nsec = 10000000;
nanosleep(&ts1, NULL);
tv1.tv_sec = 0;
tv1.tv_usec = 40000;
select(0, NULL, NULL, NULL,&tv1);
}
return 1;
}
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org
[ committer note: Made it use evsel->handler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch "perf inject" can only handle data from pipe.
I want to use "perf inject" for reworking events. Look at my following patch.
v2: add information about new options in tools/perf/Documentation/
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-2-git-send-email-avagin@openvz.org
[ committer note: fixed it up to cope with 5852a44, 5ded57a, 002439e & f62d3f0 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>