If a timer fires after kvm_inject_pending_timer_irqs() but before
local_irq_disable() the code will enter guest mode and only inject such
timer interrupt the next time an unrelated event causes an exit.
It would be simpler if the timer->pending irq conversion could be done
with IRQ's disabled, so that the above problem cannot happen.
For now introduce a new vcpu requests bit to cancel guest entry.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
A guest vcpu instance can be scheduled to a different physical CPU
between the test for KVM_REQ_MIGRATE_TIMER and local_irq_disable().
If that happens, the timer will only be migrated to the current pCPU on
the next exit, meaning that guest LAPIC timer event can be delayed until
a host interrupt is triggered.
Fix it by cancelling guest entry if any vcpu request is pending. This
has the side effect of nicely consolidating vcpu->requests checks.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: nfs_updatepage(): don't mark page as dirty if an error occurred
NFS: Fix filehandle size comparisons in the mount code
NFS: Reduce the NFS mount code stack usage.
Fix a sign issue in xdr_decode_fhstatus3()
Fix incorrect comparison in nfs_validate_mount_data()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: refactor wait_for_completion_timeout()
sched: fix wait_for_completion_timeout() spurious failure under heavy load
sched: rt: dont stop the period timer when there are tasks wanting to run
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
xen: don't drop NX bit
xen: mask unwanted pte bits in __supported_pte_mask
xen: Use wmb instead of rmb in xen_evtchn_do_upcall().
x86: fix NULL pointer deref in __switch_to
There is a race in the COW logic. It contains a shortcut to avoid the
COW and reuse the page if we have the sole reference on the page,
however it is possible to have two racing do_wp_page()ers with one
causing the other to mistakenly believe it is safe to take the shortcut
when it is not. This could lead to data corruption.
Process 1 and process2 each have a wp pte of the same anon page (ie.
one forked the other). The page's mapcount is 2. Then they both
attempt to write to it around the same time...
proc1 proc2 thr1 proc2 thr2
CPU0 CPU1 CPU3
do_wp_page() do_wp_page()
trylock_page()
can_share_swap_page()
load page mapcount (==2)
reuse = 0
pte unlock
copy page to new_page
pte lock
page_remove_rmap(page);
trylock_page()
can_share_swap_page()
load page mapcount (==1)
reuse = 1
ptep_set_access_flags (allow W)
write private key into page
read from page
ptep_clear_flush()
set_pte_at(pte of new_page)
Fix this by moving the page_remove_rmap of the old page after the pte
clear and flush. Potentially the entire branch could be moved down
here, but in order to stay consistent, I won't (should probably move all
the *_mm_counter stuff with one patch).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 89f5b7da2a ("Reinstate ZERO_PAGE
optimization in 'get_user_pages()' and fix XIP") broke vmware, as
reported by Jeff Chua:
"This broke vmware 6.0.4.
Jun 22 14:53:03.845: vmx| NOT_IMPLEMENTED
/build/mts/release/bora-93057/bora/vmx/main/vmmonPosix.c:774"
and the reason seems to be that there's an old bug in how we handle do
FOLL_ANON on VM_SHARED areas in get_user_pages(), but since it only
triggered if the whole page table was missing, nobody had apparently hit
it before.
The recent changes to 'follow_page()' made the FOLL_ANON logic trigger
not just for whole missing page tables, but for individual pages as
well, and exposed this problem.
This fixes it by making the test for when FOLL_ANON is used more
careful, and also makes the code easier to read and understand by moving
the logic to a separate inline function.
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I noted that the 'struct tty_struct *real_tty' is not used in this
function, so I removed the code about 'real_tty'.
Signed-off-by: Gustavo Fernando Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some of the requirement rules are now more relaxed. Also correct a
contradiction in the previous update
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following sparse warnings:
fs/dcache.c:2183:19: warning: symbol 'filp_cachep' was not declared. Should it be static?
fs/dcache.c:115:3: warning: context imbalance in 'dentry_iput' - unexpected unlock
fs/dcache.c:188:2: warning: context imbalance in 'dput' - different lock contexts for basic block
fs/dcache.c:400:2: warning: context imbalance in 'prune_one_dentry' - different lock contexts for basic block
fs/dcache.c:431:22: warning: context imbalance in 'prune_dcache' - different lock contexts for basic block
fs/dcache.c:563:2: warning: context imbalance in 'shrink_dcache_sb' - different lock contexts for basic block
fs/dcache.c:1385:6: warning: context imbalance in 'd_delete' - wrong count at exit
fs/dcache.c:1636:2: warning: context imbalance in '__d_unalias' - unexpected unlock
fs/dcache.c:1735:2: warning: context imbalance in 'd_materialise_unique' - different lock contexts for basic block
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The path that __d_path() computes can become slightly inconsistent when it
races with mount operations: it grabs the vfsmount_lock when traversing mount
points but immediately drops it again, only to re-grab it when it reaches the
next mount point. The result is that the filename computed is not always
consisent, and the file may never have had that name. (This is unlikely, but
still possible.)
Fix this by grabbing the vfsmount_lock for the whole duration of
__d_path().
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: John Johansen <jjohansen@suse.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Current memfree FW has a bug which in some cases, assumes that ICM
pages passed to it are cleared. This patch uses __GFP_ZERO to
allocate all ICM pages passed to the FW. Once firmware with a fix is
released, we can make the workaround conditional on firmware version.
This fixes the bug reported by Arthur Kepner <akepner@sgi.com> here:
http://lists.openfabrics.org/pipermail/general/2008-May/050026.html
Cc: <stable@kernel.org>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
[ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing
ICM memory and memset()ing it to 0. - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
fl_insert and fl_remove are not used right now in the kernel. Remove them.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generic_readlink calls ERR_PTR for negative and positive values
(vfs_readlink returns length of "link"), but it should not
(not an errno) and does not need to.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The POSIX.1 draft spec for futimens()/utimensat() says:
Only a process with the effective user ID equal to the
user ID of the file, *or with write access to the file*,
or with appropriate privileges may use futimens() or
utimensat() with a null pointer as the times argument
or with both tv_nsec fields set to the special value
UTIME_NOW.
The important piece here is "with write access to the file", and
this matters for futimens(), which deals with an argument that
is a file descriptor referring to the file whose timestamps are
being updated, The standard is saying that the "writability"
check is based on the file permissions, not the access mode with
which the file is opened. (This behavior is consistent with the
semantics of FreeBSD's futimes().) However, Linux is currently
doing the latter -- futimens(fd, times) is a library
function implemented as
utimensat(fd, NULL, times, 0)
and within the utimensat() implementation we have the code:
f = fget(dfd); // dfd is 'fd'
...
if (f) {
if (!(f->f_mode & FMODE_WRITE))
goto mnt_drop_write_and_out;
The check should instead be based on the file permissions.
Thanks to Miklos for pointing out how to do this check.
Miklos also pointed out a simplification that could be
made to my first version of this patch, since the checks
for the pathname and file descriptor cases can now be
conflated.
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The POSIX.1 draft spec for utimensat() says:
Only a process with the effective user ID equal to the
user ID of the file or with appropriate privileges may use
futimens() or utimensat() with a non-null times argument
that does not have both tv_nsec fields set to UTIME_NOW
and does not have both tv_nsec fields set to UTIME_OMIT.
If this condition is violated, then the error EPERM should result.
However, the current implementation does not generate EPERM if
one tv_nsec field is UTIME_NOW while the other is UTIME_OMIT.
It should give this error for that case.
This patch:
a) Repairs that problem.
b) Removes the now unneeded nsec_special() helper function.
c) Adds some comments to explain the checks that are being
performed.
Thanks to Miklos, who provided comments on the previous iteration
of this patch. As a result, this version is a little simpler and
and its logic is better structured.
Miklos suggested an alternative idea, migrating the
is_owner_or_cap() checks into fs/attr.c:inode_change_ok() via
the use of an ATTR_OWNER_CHECK flag. Maybe we could do that
later, but for now I've gone with this version, which is
IMO simpler, and can be more easily read as being correct.
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The POSIX.1 draft spec for utimensat() says that if a times[n].tv_nsec
field is UTIME_OMIT or UTIME_NOW, then the value in the corresponding
tv_sec field is ignored. See the last sentence of this para, from
the spec:
If the tv_nsec field of a timespec structure has
the special value UTIME_NOW, the file's relevant
timestamp shall be set to the greatest value
supported by the file system that is not greater than
the current time. If the tv_nsec field has the
special value UTIME_OMIT, the file's relevant
timestamp shall not be changed. In either case,
the tv_sec field shall be ignored.
However the current Linux implementation requires the tv_sec value to be
zero (or the EINVAL error results). This requirement should be removed.
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes utimensat() to make its behavior consistent
with that of utime()/utimes() when dealing with files marked
immutable and append-only.
The current utimensat() implementation also returns EPERM if
'times' is non-NULL and the tv_nsec fields are both UTIME_NOW.
For consistency, the
(times != NULL && times[0].tv_nsec == UTIME_NOW &&
times[1].tv_nsec == UTIME_NOW)
case should be treated like the traditional utimes() case where
'times' is NULL. That is, the call should succeed for a file
marked append-only and should give the error EACCES if the file
is marked as immutable.
The simple way to do this is to set 'times' to NULL
if (times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW).
This is also the natural approach, since POSIX.1 semantics consider the
times == {{x, UTIME_NOW}, {y, UTIME_NOW}}
to be exactly equivalent to the case for
times == NULL.
(Thanks to Miklos for pointing this out.)
Patch 3 in this series relies on the simplification provided
by this patch.
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
devcgroup_inode_permission() expects MAY_FOO, not FMODE_FOO; kindly
keep your misdesign consistent if you positively have to inflict it
on the kernel.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch addresses a very sporadic pi-futex related failure in
highly threaded java apps on large SMP systems.
David Holmes reported that the pi_state consistency check in
lookup_pi_state triggered with his test application. This means that
the kernel internal pi_state and the user space futex variable are out
of sync. First we assumed that this is a user space data corruption,
but deeper investigation revieled that the problem happend because the
pi-futex code is not handling a fault in the futex_lock_pi path when
the user space variable needs to be fixed up.
The fault happens when a fork mapped the anon memory which contains
the futex readonly for COW or the page got swapped out exactly between
the unlock of the futex and the return of either the new futex owner
or the task which was the expected owner but failed to acquire the
kernel internal rtmutex. The current futex_lock_pi() code drops out
with an inconsistent in case it faults and returns -EFAULT to user
space. User space has no way to fixup that state.
When we wrote this code we thought that we could not drop the hash
bucket lock at this point to handle the fault.
After analysing the code again it turned out to be wrong because there
are only two tasks involved which might modify the pi_state and the
user space variable:
- the task which acquired the rtmutex
- the pending owner of the pi_state which did not get the rtmutex
Both tasks drop into the fixup_pi_state() function before returning to
user space. The first task which acquired the hash bucket lock faults
in the fixup of the user space variable, drops the spinlock and calls
futex_handle_fault() to fault in the page. Now the second task could
acquire the hash bucket lock and tries to fixup the user space
variable as well. It either faults as well or it succeeds because the
first task already faulted the page in.
One caveat is to avoid a double fixup. After returning from the fault
handling we reacquire the hash bucket lock and check whether the
pi_state owner has been modified already.
Reported-by: David Holmes <david.holmes@sun.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Holmes <david.holmes@sun.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kernel/futex.c | 93 ++++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 73 insertions(+), 20 deletions(-)
snd_assert() in save_mixer() and restore_mixer() in sb_mixer.c is
just wrong. The debug code wasn't tested at all, obviously...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The irq handler may be called before the proper initialization of hardware.
Call snd_aw2_saa7146_setup() before the irq handler registration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Christian Borntraeger reported that reinstating cond_resched() with
CONFIG_PREEMPT caused a performance regression on lmbench:
For example select file 500:
23 microseconds
32 microseconds
and that's really because we totally unnecessarily do the cond_resched()
in the innermost loop of select(), which is just silly.
This moves it out from the innermost loop (which only ever loops ove the
bits in a single "unsigned long" anyway), which makes the performance
regression go away.
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The zonelist patches caused the loop that checks for available
objects in permitted zones to not terminate immediately. One object
per zone per allocation may be allocated and then abandoned.
Break the loop when we have successfully allocated one object.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch changes the function reserve_bootmem_node() from void to int,
returning -ENOMEM if the allocation fails.
This fixes a build problem on x86 with CONFIG_KEXEC=y and
CONFIG_NEED_MULTIPLE_NODES=y
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
netns: Don't receive new packets in a dead network namespace.
sctp: Make sure N * sizeof(union sctp_addr) does not overflow.
pppoe: warning fix
ipv6: Drop packets for loopback address from outside of the box.
ipv6: Remove options header when setsockopt's optlen is 0
mac80211: detect driver tx bugs
As noticed by Gabriel Campana, the kmalloc() length arg
passed in by sctp_getsockopt_local_addrs_old() can overflow
if ->addr_num is large enough.
Therefore, enforce an appropriate limit.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix warning:
drivers/net/pppoe.c: In function 'pppoe_recvmsg':
drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast
because skb->len is unsigned int and total_len is size_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Which was removed in the hope that generic legacy IDE quirk in
drivers/pci/probe.c is sufficient for Cypress IDE.
It isn't, as this controller has non-standard BAR layout:
secondary channel registers are in the BAR0-1 of the second
PCI function - not in the BAR2-3 of the same function, as the
generic quirk routine assumes.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vast majority of these build failures are gcc-4.3 warnings
about static functions and objects being referenced from
non-static (read: "extern inline") functions, in conjunction
with our -Werror.
We cannot just convert "extern inline" to "static inline",
as people keep suggesting all the time, because "extern inline"
logic is crucial for generic kernel build.
So
- just make sure that all callees of critical "extern inline"
functions are also "extern inline";
- use "static inline", wherever it's possible.
traps.c: work around gcc-4.3 being too smart about array
bounds-checking.
TODO: add "gnu_inline" attribute to all our "extern inline"
functions to ensure desired behaviour with future compilers.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With built-in scsi disk driver, the final link fails with a following
error:
`.exit.text' referenced in section `.rodata' of drivers/built-in.o:
defined in discarded section `.exit.text' of drivers/built-in.o
This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4
versions, and also with -O2 and gcc-4.3.
The problem is in sd.c:sd_major() being inlined into __exit function
exit_sd(), and the compiler generating a jump table in .rodata section
for the 'switch' statement in sd_major(). So we have references to
discarded section.
Fixed with a big hammer in the form of -fno-jump-tables.
Note that jump tables vs. discarded sections is a generic problem,
other architectures are just lucky not to suffer from it. But with
a slightly more complex switch/case statement it can be reproduced
on x86 as well. So maybe at some point we should consider
-fno-jump-tables as a generic compile option...
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To calculate addresses of locally defined variables, GCC uses 32-bit
displacement from the GP. Which doesn't work for per cpu variables in
modules, as an offset to the kernel per cpu area is way above 4G.
The workaround is to force allocation of a GOT entry for per cpu variable
using ldq instruction with a 'literal' relocation.
I had to use custom asm/percpu.h, as a required argument magic doesn't
work with asm-generic/percpu.h macros.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
BAST: Remove old IDE driver
pcmcia ide kingston compactflash's have a new manufacturer id
pcmcia: add another pata/ide ID
pcmcia: add an pata/ide ID
ide: increase timeout in wait_drive_not_busy()
palm_bk3710: fix resource management
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: Kconfig menu touch-up
firewire: Kconfig menu touch-up
firewire: deadline for PHY config transmission
firewire: fw-ohci: unify printk prefixes
firewire: fill_bus_reset_event needs lock protection
firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID
firewire: fw-ohci: disable PHY packet reception into AR context
firewire: fw-ohci: use of uninitialized data in AR handler
firewire: don't panic on invalid AR request buffer
