The pointer 'node' is being assigned with a value that is never
read and is re-assigned later. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
Several drivers cast a struct device pointer to a struct
platform_device pointer only to then call platform_get_drvdata().
To improve readability, these constructs can be simplified
by using dev_get_drvdata() directly.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFKBAABCgA0FiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAl1DQ3MWHHNlYW5wYXVs
QGNocm9taXVtLm9yZwAKCRCW9w39qEoHCtmoB/9Qesjz6sh2CZ8PhehHi2hLniiY
33ojx73lPkAPY2INbSTMiPFyCRvB9emvIYG68nkHNX+Ey7ZjQIzXenuzFLLFfO5P
jS3phHs2UtFfMAfOaxApF11vtnwzGQu3GqpLnoC80DzcLzpDAXJgaV608LcTwzug
48NHVvG7pzOKyPOyVQG5q/YJ1H8hqr7rxSdAfOlradCwoo3PoNxIU2ieqF0YrrmV
nn18E4XpTS9PRS+zxl4KPVIivHg1HS+Ii23V6C+y5fPEW/lVO2WOahm1wW/WD5Mt
07o0WOZkU4qLjAmLyWgmzpLlZ/Scl2WIhje2Z5EkpD+o7wVlOaqA2tge3OTZ
=aA5E
-----END PGP SIGNATURE-----
Merge tag 'msm-fixes-2019_08_01' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
- Fix the dma_sync calls applied last week (Rob)
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 02 Aug 2019 05:54:27 AM AEST
# gpg: using RSA key 96F70DFDA84A070A
# gpg: Can't check signature: public key not found
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801200439.GV104440@art_vandelay
Looks like a regression got introduced into nv50_mstc_atomic_check()
that somehow didn't get found until now. If userspace changes
crtc_state->active to false but leaves the CRTC enabled, we end up
calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in
asyh->dp.pbn. However, if the display is inactive we end up calculating
a PBN of 0, which inadvertently causes us to have an allocation of 0.
>From there, if userspace then disables the CRTC afterwards we end up
accidentally attempting to free the VCPI twice:
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
Call Trace:
drm_atomic_helper_check_modeset+0x3f3/0xa60 [drm_kms_helper]
? drm_atomic_check_only+0x43/0x780 [drm]
drm_atomic_helper_check+0x15/0x90 [drm_kms_helper]
nv50_disp_atomic_check+0x83/0x1d0 [nouveau]
drm_atomic_check_only+0x54d/0x780 [drm]
? drm_atomic_set_crtc_for_connector+0xec/0x100 [drm]
drm_atomic_commit+0x13/0x50 [drm]
drm_atomic_helper_set_config+0x81/0x90 [drm_kms_helper]
drm_mode_setcrtc+0x194/0x6a0 [drm]
? vprintk_emit+0x16a/0x230
? drm_ioctl+0x163/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
drm_ioctl_kernel+0xaa/0xf0 [drm]
drm_ioctl+0x208/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
nouveau_drm_ioctl+0x63/0xb0 [nouveau]
do_vfs_ioctl+0x405/0x660
? recalc_sigpending+0x17/0x50
? _copy_from_user+0x37/0x60
ksys_ioctl+0x5e/0x90
? exit_to_usermode_loop+0x92/0xe0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x59/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
---[ end trace 4c395c0c51b1f88d ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for
[MST PORT:00000000e288eb7d] found in mst state 000000008e642070
So, fix this by doing what we probably should have done from the start: only
call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so
that VCPI allocations remain for as long as the CRTC is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com
drm-fixes-5.3-2019-07-31:
amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs
amdkfd:
- fix memory alignment for VegaM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com
Commit f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.
Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.
Fixes: f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/i2c/busses/i2c-s3c2410.c: In function 'i2c_s3c_irq_nextbyte':
drivers/i2c/busses/i2c-s3c2410.c:431:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (i2c->state == STATE_READ)
^
drivers/i2c/busses/i2c-s3c2410.c:439:2: note: here
case STATE_WRITE:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
offset of 3 cycles (compared to 4 in eg. SAMA5D3).
Cc: stable@vger.kernel.org # 5.2.x
[needs applying to i2c-at91.c instead for earlier kernels]
Fixes: 0ef6f3213d ("i2c: at91: add support for new alternative command mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Driver was not disabling TXRDY interrupt after last TX byte.
This caused interrupt storm until transfer timeouts for slow
or broken device on the bus. The patch fixes the interrupt storm
on my SAMA5D2-based board.
Cc: stable@vger.kernel.org # 5.2.x
[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes: fac368a040 ("i2c: at91: add new driver")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO
(patch 6a43074e2f) introduced two problems with BIO fragment handling
for direct IOs:
1) The dio size processed is calculated by incrementing the ret variable
by the size of the bio fragment issued for the dio. However, this size
is obtained directly from bio->bi_iter.bi_size AFTER the bio submission
which may result in referencing the bi_size value after the bio
completed, resulting in an incorrect value use.
2) The ret variable is not incremented by the size of the last bio
fragment issued for the bio, leading to an invalid IO size being
returned to the user.
Fix both problem by using dio->size (which is incremented before the bio
submission) to update the value of ret after bio submissions, including
for the last bio fragment issued.
Fixes: 6a43074e2f ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix a couple of UAF on error paths (RZA1, GICv3 ITS)
- Fix iMX GPCv2 trigger setting
- Add missing of_node_put on error path in MBIGEN
- Add another bunch of /* fall-through */ to silence warnings
-----BEGIN PGP SIGNATURE-----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=oXHS
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
A small bunch of fixes from the irqchip department:
- Fix a couple of UAF on error paths (RZA1, GICv3 ITS)
- Fix iMX GPCv2 trigger setting
- Add missing of_node_put on error path in MBIGEN
- Add another bunch of /* fall-through */ to silence warnings
This LSM was added in v5.1 and needs an entry in the MAINTAINERS file.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error
handling case instead of 0, as done elsewhere in this function.
Fixes: e8ac9389f0 ("RDMA: Fix allocation failure on pointer pd")
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
Fixes: dc3ea265b8 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
We encountered a use-after-free bug when unloading the driver:
[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640] dump_stack+0x9a/0xeb
[ 3562.126911] print_address_description+0xe3/0x2e0
[ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545] __kasan_report+0x15c/0x1df
[ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174] kasan_report+0xe/0x20
[ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158] ? qlist_free_all+0x51/0xb0
[ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833] ? quarantine_reduce+0x1fa/0x270
[ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577] process_one_work+0x90c/0x1860
[ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320] worker_thread+0x87/0xbb0
[ 3562.156687] ? __kthread_parkme+0xb6/0x180
[ 3562.158058] ? process_one_work+0x1860/0x1860
[ 3562.159429] kthread+0x320/0x3e0
[ 3562.161391] ? kthread_park+0x120/0x120
[ 3562.162744] ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602] save_stack+0x19/0x80
[ 3562.189586] __kasan_slab_free+0x11d/0x160
[ 3562.190571] kfree+0xf5/0x2f0
[ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514] disable_device+0x14e/0x260 [ib_core]
[ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329] __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288] do_syscall_64+0x95/0x470
[ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe
The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.
Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.
Fixes: 4be90bc60d ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
The check for QP type different than XRC has excluded driver QP
types from the resource tracker.
As a result, "rdma resource show" user command would not show opened
driver QPs which does not reflect the real state of the system.
Check QP type explicitly instead of assuming enum values/ordering.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801104354.11417-1-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Due to the complexity of client->remove() callbacks it is desirable to not
hold any locks while calling them. Remove the last one by tracking only
the highest client ID and running backwards from there over the xarray.
Since the only purpose of that lock was to protect the linked list, we can
drop the lock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
lockdep reports:
WARNING: possible circular locking dependency detected
modprobe/302 is trying to acquire lock:
0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990
but task is already holding lock:
000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&device->client_data_rwsem){++++}:
down_read+0x3f/0x160
ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
cm_process_work+0x29/0x110 [ib_cm]
cm_req_handler+0x10f5/0x1c00 [ib_cm]
cm_work_handler+0x54c/0x311d [ib_cm]
process_one_work+0x4aa/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
process_one_work+0x45f/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)ib_cm){+.+.}:
lock_acquire+0xc8/0x1d0
flush_workqueue+0x102/0x990
cm_remove_one+0x30e/0x3c0 [ib_cm]
remove_client_context+0x94/0xd0 [ib_core]
disable_device+0x10a/0x1f0 [ib_core]
__ib_unregister_device+0x5a/0xe0 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
__mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
mlx5_remove_device+0x144/0x150 [mlx5_core]
mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
__x64_sys_delete_module+0x227/0x350
do_syscall_64+0xc3/0x6a4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.
The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.
Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.
This will fence the two unregistration paths without holding any locks.
Cc: <stable@vger.kernel.org>
Fixes: 921eab1143 ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When CONFIG_KASAN_SW_TAGS=n, set_tag() is compiled away. GCC throws a
warning,
mm/kasan/common.c: In function '__kasan_kmalloc':
mm/kasan/common.c:464:5: warning: variable 'tag' set but not used
[-Wunused-but-set-variable]
u8 tag = 0xff;
^~~
Fix it by making __tag_set() a static inline function the same as
arch_kasan_set_tag() in mm/kasan/kasan.h for consistency because there
is a macro in arch/arm64/include/asm/kasan.h,
#define arch_kasan_set_tag(addr, tag) __tag_set(addr, tag)
However, when CONFIG_DEBUG_VIRTUAL=n and CONFIG_SPARSEMEM_VMEMMAP=y,
page_to_virt() will call __tag_set() with incorrect type of a
parameter, so fix that as well. Also, still let page_to_virt() return
"void *" instead of "const void *", so will not need to add a similar
cast in lowmem_page_address().
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
The mdp5 drm/kms driver currently does not work on command-mode DSI
panels due to 'vblank wait timed out' errors. This causes a latency
of seconds, or tens of seconds in some cases, before content is shown
on the panel. This hardware does not have the something that we can use
as a frame counter available when running in command mode, so we need to
fall back to using timestamps by setting the max_vblank_count to zero.
This can be done on a per-CRTC basis, so the convert mdp5 to use
drm_crtc_set_max_vblank_count().
This change was tested on a LG Nexus 5 (hammerhead) phone.
Suggested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org
GCC throws a warning,
arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
pud_t pud;
^~~
because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Remove rcu_read_lock()/rcu_read_unlock() from debug exception
handlers since we are sure those are not preemptible and
interrupts are off.
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
On a system with two security states, if SCR_EL3.FIQ is cleared,
non-secure IRQ priorities get shifted to fit the secure view but
priority masks aren't.
On such system, it turns out that GIC_PRIO_IRQON masks the priority of
normal interrupts, which obviously ends up in a hang.
Increase GIC_PRIO_IRQON value (i.e. lower priority) to make sure
interrupts are not blocked by it.
Cc: Oleg Nesterov <oleg@redhat.com>
Fixes: bd82d4bd21 ("arm64: Fix incorrect irqflag restore for priority masking")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[will: fixed Fixes: tag]
Signed-off-by: Will Deacon <will@kernel.org>
- sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred probe
- dw_mmc: Fix occasional hang after tuning on eMMC
- meson-mx-sdio: Fix misuse of GENMASK macro
- mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES
-----BEGIN PGP SIGNATURE-----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=arat
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred
probe
- dw_mmc: Fix occasional hang after tuning on eMMC
- meson-mx-sdio: Fix misuse of GENMASK macro
- mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES
* tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_spi: Enable stable writes
mmc: meson-mx-sdio: Fix misuse of GENMASK macro
mmc: dw_mmc: Fix occasional hang after tuning on eMMC
mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if
the GPIOLIB is disabled.
- Preserve the descriptor flags when setting the
initial direction on lines.
-----BEGIN PGP SIGNATURE-----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=2Uyx
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Three GPIO fixes, all touching the core, so quite important:
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is
disabled.
- Preserve the descriptor flags when setting the initial direction on
lines"
* tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: Preserve desc->flags when setting state
gpio: don't WARN() on NULL descs if gpiolib is disabled
gpiolib: fix incorrect IRQ requesting of an active-low lineevent
The bochs driver (and virtual hardware) requires buffer objects to
reside in video ram to display them to the screen. So it can not
display the framebuffer console because the respective buffer object
is permanently pinned in system memory.
Using a shadow buffer for the console solves this problem. The console
emulation will pin the buffer object only during updates from the shadow
buffer. Otherwise, the bochs driver can freely relocated the buffer
between system memory and video ram.
v2:
* select shadow FB via struct drm_mode_config.prefer_shadow_fbdev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315833/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes DRM clients to not map the buffer by default. The
buffer, like any buffer object, should be mapped and unmapped when
needed.
An unmapped buffer object can be evicted to system memory and does
not consume video ram until displayed. This allows to use generic fbdev
emulation with drivers for low-memory devices, such as ast and mgag200.
This change affects the generic framebuffer console. HW-based consoles
map their console buffer once and keep it mapped. Userspace can mmap this
buffer into its address space. The shadow-buffered framebuffer console
only needs the buffer object to be mapped during updates. While not being
updated from the shadow buffer, the buffer object can remain unmapped.
Userspace will always mmap the shadow buffer.
v2:
* change DRM client to not map buffer by default
* manually map client buffer for fbdev with HW framebuffer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315830/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DRM clients, such as the fbdev emulation, have their buffer objects
mapped by default. Mapping a buffer implicitly prevents its relocation.
Hence, the buffer may permanently consume video memory while it's
allocated. This is a problem for drivers of low-memory devices, such as
ast, mgag200 or older framebuffer hardware, which will then not have
enough memory to display other content (e.g., X11).
This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal
DRM clients can use these functions to unmap and remap buffer objects
as needed.
There's no reference counting for vmap operations. Callers are expected
to either keep buffers mapped (as it is now), or call vmap and vunmap
in pairs around code that accesses the mapped memory.
v2:
* remove several duplicated NULL-pointer checks
v3:
* style and typo fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315831/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use SMBUS_MASTER_DATA_READ.MASTER_RD_STATUS bit to check for RX
FIFO empty condition because SMBUS_MASTER_FIFO_CONTROL.MASTER_RX_PKT_COUNT
is not updated for read >= 64 bytes. This fixes the issue when trying to
read from the I2C slave more than 63 bytes.
Fixes: c24b8d574b ("i2c: iproc: Extend I2C read up to 255 bytes")
Cc: stable@kernel.org
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
I fixed it by making mrproper clean everything.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
Same as on x86-64, strip the .comment, .note and debug sections from the
Linux kernel before creating the compressed image for the boot loader.
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
- make spd eeproms world-readable again
-----BEGIN PGP SIGNATURE-----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=Olm4
-----END PGP SIGNATURE-----
Merge tag 'at24-v5.3-rc3-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.3-rc3
- make spd eeproms world-readable again
If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.
The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk
(cherry picked from commit 18398904ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk
(cherry picked from commit de5147b8ce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
(cherry picked from commit 092be382a2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Instead of always calling xen_destroy_contiguous_region() in case the
memory is DMA-able for the used device, do so only in case it has been
made DMA-able via xen_create_contiguous_region() before.
This will avoid a lot of xen_destroy_contiguous_region() calls for
64-bit capable devices.
As the memory in question is owned by swiotlb-xen the PG_owner_priv_1
flag of the first allocated page can be used for remembering.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
range_straddles_page_boundary() is open coding several macros from
include/xen/page.h. Use those instead. Additionally there is no need
to have check_pages_physically_contiguous() as a separate function as
it is used only once, so merge it into range_straddles_page_boundary().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
