Commit Graph

10703 Commits

Author SHA1 Message Date
Linus Torvalds
1ec5c1867a This is the bulk of GPIO changes for the v4.11 cycle
Core changes:
 
 - Augment fwnode_get_named_gpiod() to configure the GPIO pin
   immediately after requesting it like all other APIs do.
   This is a treewide change also updating all users.
 
 - Pass a GPIO label down to gpiod_request() from
   fwnode_get_named_gpiod(). This makes debugfs and the userspace
   ABI correctly reflect the current in-kernel consumer of a pin
   taken using this abstraction. This is a treewide change also
   updating all users.
 
 - Rename devm_get_gpiod_from_child() to
   devm_fwnode_get_gpiod_from_child() to reflect the fact that this
   function is operating on a fwnode object. This is a treewide
   change also updating all users.
 
 - Make it possible to take multiple GPIOs in a single hog of device
   tree hogs.
 
 - The refactorings switching GPIO chips to use the .set_config()
   callback using standard pin control properties and providing
   a backend into the pin control subsystem that were also merged
   into the pin control tree naturally appear here too.
 
 Testing instrumentation:
 
 - A whole slew of cleanups and improvements to the mockup GPIO
   driver. We now have an extended userspace test exercising the
   subsystem, and we can inject interrupts etc from userspace
   to fully test the core GPIO functionality.
 
 New drivers:
 
 - New driver for the Cortina Systems Gemini GPIO controller.
 
 - New driver for the Exar XR17V352/354/358 chips.
 
 - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.
 
 Driver changes:
 
 - RCAR: set the irqchip parent device, add fine-grained runtime
   PM support.
 
 - pca953x: support optional RESET control line on the chip.
 
 - DaVinci: cleanups and simplifications. Add support for multiple
   instances.
 
 - .set_multiple() and naming of lines on more or less all of the
   ISA/PCI GPIO controllers.
 
 - mcp23s08: refactored to use regmap as a first step to further
   rewrites and modernizations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYrqvqAAoJEEEQszewGV1zoHsP/i1iZBEywR9+yIx/p2/F2mJu
 nriuYFlp0V3FjHQAQ//YCA9+Catri+ZqT5l+BmG/EYdqqikHbziTyS0YArlfrMHv
 OOBfDmfftexvRI/jQAl+X/nIW531ZjYo6ZApFy/2TirTwfkI7DIMi6ujm09fcG5D
 BgCT1KuszbVtyrmhrQvbeEdVKw0qLAgwnn5eOOCQE4KuDB3s7eyal0rJaDEXhpMF
 kH/y6eySs4FChEhAEmCkM6205F5T4c2YFjL1bo5Fkh/WPrVPaKI0Ny16qbaDWU9K
 W9RaJUzf92KIW0MgcRl+r8Lxn+GekN6/jvrxddQ/Ajs/Dkh5r2JCrm7RIC9tBPcJ
 VbLfjL+cMehlSEu9eyxRQcAIeuUYCqkN8ghuVoj9xt/tDtNYsQIcJZtfW1yjmONq
 mFsd5KhfBFgspQkwF4IX3hthaqj8MH4zefQdWzAGPZMGEA1rrx2kVSEdZD3EV4VN
 84qt5Cx9hLllafthJOGjEIZFCjPIpbMRwTQ+fmc+1IB1DgN8Kc5E1FMssKbUEoOK
 2eLquLvd7iNDMidTjoi87YAisW9qnrPeRDywsqeXdQf7fzpB97gX4MQfJ5fJWEYr
 3uHCfu2u4J4cff9ygg8c4ut7ePEjz+ld/sBh9EHicbbryR4I5ZG7Ne1aQhsmb2M5
 dHZSRfQYEQ4Nl7cMJQuh
 =O81I
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...
2017-02-23 08:46:04 -08:00
Dave Airlie
94000cc329 Linux 4.10-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
 8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
 nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
 98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
 9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
 RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
 =VMy8
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
2017-02-23 12:10:12 +10:00
Andrea Arcangeli
7a0c4cf85b userfaultfd: selftest: test UFFDIO_ZEROPAGE on all memory types
This will verify -EINVAL is returned with hugetlbfs/shmem and it'll do a
functional test of UFFDIO_ZEROPAGE on anonymous memory.

Link: http://lkml.kernel.org/r/20161216144821.5183-42-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Mike Rapoport
da5502c0a3 userfaultfd: non-cooperative: selftest: add test for FORK, MADVDONTNEED and REMAP events
Add test for userfaultfd events used in non-cooperative scenario when
the process that monitors the userfaultfd and handles user faults is not
the same process that causes the page faults.

Link: http://lkml.kernel.org/r/20161216144821.5183-41-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Mike Rapoport
aa0d272174 userfaultfd: non-cooperative: selftest: add ufd parameter to copy_page
With future addition of event tests, copy_page will be called with
different userfault file descriptors

Link: http://lkml.kernel.org/r/20161216144821.5183-40-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Mike Rapoport
6228b8f2d1 userfaultfd: non-cooperative: selftest: introduce userfaultfd_open
userfaultfd_open will be needed by the non cooperative selftest.

Link: http://lkml.kernel.org/r/20161216144821.5183-39-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Mike Rapoport
419624daf0 userfaultfd: shmem: add userfaultfd_shmem test
The test verifies that anonymous shared mapping can be used with userfault
using the existing testing method.  The shared memory area is allocated
using mmap(..., MAP_SHARED | MAP_ANONYMOUS, ...) and released using
madvise(MADV_REMOVE)

Link: http://lkml.kernel.org/r/20161216144821.5183-35-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Mike Rapoport
cac673292b userfaultfd: shmem: allow registration of shared memory ranges
Expand the userfaultfd_register/unregister routines to allow shared
memory VMAs.

Currently, there is no UFFDIO_ZEROPAGE and write-protection support for
shared memory VMAs, which is reflected in ioctl methods supported by
uffdio_register.

Link: http://lkml.kernel.org/r/20161216144821.5183-34-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:28 -08:00
Mike Kravetz
9903bd7b73 userfaultfd: hugetlbfs: add userfaultfd_hugetlb test
Test userfaultfd hugetlb functionality by using the existing testing
method (in userfaultfd.c).  Instead of an anonymous memeory, a hugetlbfs
file is mmap'ed private.  In this way fallocate hole punch can be used
to release pages.  This is because madvise(MADV_DONTNEED) is not
supported for huge pages.

Use the same file, but create wrappers for allocating ranges and
releasing pages.  Compile userfaultfd.c with HUGETLB_TEST defined to
produce an executable to test userfaultfd hugetlb functionality.

Link: http://lkml.kernel.org/r/20161216144821.5183-23-aarcange@redhat.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:28 -08:00
Daniel Thompson
0937577d5f tools/vm: add missing Makefile rules
Currently the tools/vm Makefile has a rather arbitrary implicit build
rule; page-types is the first value in TARGETS so lets just build that
one!  Additionally there is no install rule and this is needed for make -C
tools vm_install to work properly.

Provide a more sensible implicit build rule and a new install rule.

Note that the variables names used by the install rule (DESTDIR and
sbindir) are copied from prior-art in tools/power/cpupower.

Link: http://lkml.kernel.org/r/20170113165630.27541-1-daniel.thompson@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:26 -08:00
Linus Torvalds
caa5942897 staging/iio driver patches for 4.11-rc1
Here is the big staging and iio driver patchsets for 4.11-rc1.
 
 We almost broke even this time around, with only a few thousand lines
 added overall, as we removed the old and obsolete i4l code, but added
 some new drivers for the RPi platform, as well as adding some new IIO
 drivers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2j/w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymZ1ACdFR4o6xYrWEizmao4a/u+lUZE1aIAnRmcGcIc
 J+leO1n9bE5iadQvKYUW
 =sKVA
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/iio driver updates from Greg KH:
 "Here is the big staging and iio driver patchsets for 4.11-rc1.

  We almost broke even this time around, with only a few thousand lines
  added overall, as we removed the old and obsolete i4l code, but added
  some new drivers for the RPi platform, as well as adding some new IIO
  drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits)
  Staging: vc04_services: Fix the "space prohibited" code style errors
  Staging: vc04_services: Fix the "wrong indent" code style errors
  staging: octeon: Use net_device_stats from struct net_device
  Staging: rtl8192u: ieee80211: ieee80211.h - style fix
  Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix
  Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix
  Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix
  Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix
  Staging: rtl8192u: r8192U.h - style fix
  Staging: rtl8192u: r8192U_core.c - style fix
  Staging: rtl8192u: r819xU_cmdpkt.c - style fix
  staging: rtl8192u: blank lines aren't necessary before a close brace '}'
  staging: rtl8192u: Adding space after enum and struct definition
  staging: rtl8192u: Adding space after struct definition
  Staging: ks7010: Add required and preferred spaces around operators
  Staging: ks7010: ks*: Remove redundant blank lines
  Staging: ks7010: ks*: Add missing blank lines after declarations
  staging: visorbus, replace init_timer with setup_timer
  staging: vt6656: rxtx.c Removed multiple dereferencing
  staging: vt6656: Alignment match open parenthesis
  ...
2017-02-22 12:14:01 -08:00
Linus Torvalds
b2064617c7 driver core patches for 4.11-rc1
Here is the "small" driver core patches for 4.11-rc1.
 
 Not much here, some firmware documentation and self-test updates, a
 debugfs code formatting issue, and a new feature for call_usermodehelper
 to make it more robust on systems that want to lock it down in a more
 secure way.
 
 All of these have been linux-next for a while now with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2jKg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymCEACgozYuqZZ/TUGW0P3xVNi7fbfUWCEAn3nYExrc
 XgevqeYOSKp2We6X/2JX
 =aZ+5
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "small" driver core patches for 4.11-rc1.

  Not much here, some firmware documentation and self-test updates, a
  debugfs code formatting issue, and a new feature for call_usermodehelper
  to make it more robust on systems that want to lock it down in a more
  secure way.

  All of these have been linux-next for a while now with no reported
  issues"

* tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: handle null pointers while printing node name and path
  Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()
  Make static usermode helper binaries constant
  kmod: make usermodehelper path a const string
  firmware: revamp firmware documentation
  selftests: firmware: send expected errors to /dev/null
  selftests: firmware: only modprobe if driver is missing
  platform: Print the resource range if device failed to claim
  kref: prefer atomic_inc_not_zero to atomic_add_unless
  debugfs: improve formatting of debugfs_real_fops()
2017-02-22 11:44:32 -08:00
Linus Torvalds
e30aee9e10 char/misc driver patches for 4.11-rc1
Here is the big char/misc driver patchset for 4.11-rc1.
 
 Lots of different driver subsystems updated here.  Rework for the hyperv
 subsystem to handle new platforms better, mei and w1 and extcon driver
 updates, as well as a number of other "minor" driver updates.  Full
 details are in the shortlog below.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2iRQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynhFACguVE+/ixj5u5bT5DXQaZNai/6zIAAmgMWwd/t
 YTD2cwsJsGbTT1fY3SUe
 =CiSI
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patchset for 4.11-rc1.

  Lots of different driver subsystems updated here: rework for the
  hyperv subsystem to handle new platforms better, mei and w1 and extcon
  driver updates, as well as a number of other "minor" driver updates.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  goldfish: Sanitize the broken interrupt handler
  x86/platform/goldfish: Prevent unconditional loading
  vmbus: replace modulus operation with subtraction
  vmbus: constify parameters where possible
  vmbus: expose hv_begin/end_read
  vmbus: remove conditional locking of vmbus_write
  vmbus: add direct isr callback mode
  vmbus: change to per channel tasklet
  vmbus: put related per-cpu variable together
  vmbus: callback is in softirq not workqueue
  binder: Add support for file-descriptor arrays
  binder: Add support for scatter-gather
  binder: Add extra size to allocator
  binder: Refactor binder_transact()
  binder: Support multiple /dev instances
  binder: Deal with contexts in debugfs
  binder: Support multiple context managers
  binder: Split flat_binder_object
  auxdisplay: ht16k33: remove private workqueue
  auxdisplay: ht16k33: rework input device initialization
  ...
2017-02-22 11:38:22 -08:00
Linus Torvalds
8ff546b801 USB/PHY patches for 4.11-rc1
Here is the big USB and PHY driver updates for 4.11-rc1.
 
 Nothing major, just the normal amount of churn in the usb gadget and dwc
 and xhci controllers, new device ids, new phy drivers, a new usb-serial
 driver, and a few other minor changes in different USB drivers.
 
 All have been in linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykh7ACffotTJvB/gwpuSIWh6qhA8KQ9mH8AnjlxMafv
 b5b3vfOXJ8/N0Go25VwI
 =7fqN
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and PHY driver updates for 4.11-rc1.

  Nothing major, just the normal amount of churn in the usb gadget and
  dwc and xhci controllers, new device ids, new phy drivers, a new
  usb-serial driver, and a few other minor changes in different USB
  drivers.

  All have been in linux-next for a long time with no reported issues"

* tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: cdc-wdm: remove logically dead code
  USB: serial: keyspan: drop header file
  USB: serial: io_edgeport: drop io-tables header file
  usb: musb: add code comment for clarification
  usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver
  usb: misc: usbtest: remove redundant check on retval < 0
  USB: serial: upd78f0730: sort device ids
  USB: serial: upd78f0730: add ID for EVAL-ADXL362Z
  ohci-hub: fix typo in dbg_port macro
  usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  usb: musb: tusb6010: Clean up tusb_omap_dma structure
  usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  usb: musb: cppi_dma: Clean up cppi structure
  usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  usb: musb: dma: Add a DMA completion platform callback
  drivers: usb: usbip: Add missing break statement to switch
  usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()
  USB: serial: mos7840: fix another NULL-deref at open
  USB: serial: console: clean up sanity checks
  USB: serial: console: fix uninitialised spinlock
  ...
2017-02-22 11:15:59 -08:00
Linus Torvalds
3051bf36c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...
2017-02-22 10:15:09 -08:00
Ingo Molnar
8a5897fec9 perf/core improvements and fixes:
New features:
 
 - Make -a/--all-cpus be the default target in 'perf record' and 'perf stat',
   just like it is with 'perf trace' (Jiri Olsa)
 
 - Introduce -q/--quiet to the 'annotate', 'diff' and 'report', fix up
   its behaviour in 'record'. This makes the output more compact by
   elliminating headers, leaving just the histogram lines (Namhyung Kim)
 
 Fixes:
 
 - Handle offline/absent CPUs (Jan Stancek)
 
 Infrastructure:
 
 - Filter out -specs=/a/b/c from CC options when building the python
   support, allowing that feature to be built with clang (Arnaldo Carvalho de Melo)
 
 - Fix DEBUG=1 build with clang (Arnaldo Carvalho de Melo)
 
 Trivial:
 
 - Fix spelling of 'preempt' in a libtraceevent function name (Steven Rostedt)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYqzrTAAoJENZQFvNTUqpADCwP/inGA8OeQGTgZgt5FW/fcrAS
 eXZUy3GPtRl1UQ/8FyegwMgkNziaipr3UbND0+lpuqdamh9uDw25jtR/h5tKJQ1R
 ni11sHJJBJIkCJIMeuDRQMrOYf7vMp3tnVOoPsYc2ZLXh5F9ZvlFS2AcSffe6OaT
 dmISHcPDgpp2PepHm2hWDxsOaaH3NhM/SePJy8zaQfQe9duUwceAAYceIZDNE3gW
 vI8lDPXF5xeetELDe3Mv+kxcCMjI8QqlQBJbtxfBLHb68w3BFGYqzuJIUvxIEDtk
 YkupAht35VV7of2m0aCzZpi8/rr5HnmRif7VHP9a1CBTUlGpFH7f8mz4VNvBHUqi
 fp6ROOSfuQT6DqWBqXklsF4lxDBVbNNktdLfjrAgZYqOa0e0H6pr02PhW7YG9xSO
 dyHCWFDoU+8aqpUkWB4WcBNQCO/fgAb61LAHYq9IRUQNInOjCxeiHIiYOSzAHk9r
 S17ToUvS9eDph7/8dtF0IVLbfKQfCouO/09HLhkR49ftncJneS68dWwRs0h/iE5O
 +MXltscN91bJ8Dwm3zMa+gHPmy2HSudmHirphmcWNdo19biyTEGuBr89yL2bqmtC
 Z4cMjhYjOEiG78k7LLrvHFYDTyHtj0TD8lQRR27X8AYXOkv3fwXG1zO5qQrYCGMK
 5DN1TTl0EP7GUmfV9fMo
 =LWfb
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.11-20170220' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Make -a/--all-cpus be the default target in 'perf record' and 'perf stat',
   just like it is with 'perf trace' (Jiri Olsa)

 - Introduce -q/--quiet to the 'annotate', 'diff' and 'report', fix up
   its behaviour in 'record'. This makes the output more compact by
   elliminating headers, leaving just the histogram lines (Namhyung Kim)

Fixes:

 - Handle offline/absent CPUs (Jan Stancek)

Infrastructure changes:

 - Filter out -specs=/a/b/c from CC options when building the python
   support, allowing that feature to be built with clang (Arnaldo Carvalho de Melo)

 - Fix DEBUG=1 build with clang (Arnaldo Carvalho de Melo)

Trivial changes:

 - Fix spelling of 'preempt' in a libtraceevent function name (Steven Rostedt)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-21 09:05:29 +01:00
Linus Torvalds
43e31e4047 ACPI updates for v4.11-rc1
- Update of the ACPICA code in the kernel to upstream revision
    20170119 including:
    * Fixes related to the handling of the bit width and bit offset
      fields in Generic Address Structure (Lv Zheng).
    * ACPI resources handling fix related to invalid resource
      descriptors (Bob Moore).
    * Fix to enable implicit result conversion for several ASL
      library functions (Bob Moore).
    * Support for method invocations as target operands in AML
      (Bob Moore).
    * Fix to use a correct operand type for DeRefOf() in some
      situations (Bob Moore).
    * Utilities updates (Bob Moore, Lv Zheng).
    * Disassembler/debugger updates (David Box, Lv Zheng).
    * Build fixes (Colin Ian King, Lv Zheng).
    * Update of copyright notices in all files (Bob Moore).
 
  - Fix for modalias handling for SPI and I2C devices with
    DT-compatible identification strings (Dan O'Donovan).
 
  - Fixes for the ACPI EC and button drivers (Lv Zheng).
 
  - ACPI processor handling fix related to CPU hotplug (online/offline)
    on x86 (Vitaly Kuznetsov).
 
  - Suspend quirk to save/restore NVS memory over S3 transitions for
    Lenovo G50-45 (Zhang Rui).
 
  - Message formatting fix for the ACPI APEI code (Colin Ian King).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYq3J5AAoJEILEb/54YlRx9UcP/0434BwmytZkmo5vKGtmzyuE
 G4RoVNgCegq6BX8KxbML6UHHb+z7XlSHgH3mTU+Csin3OOQ4w3rgDyhwUEK2mWBO
 5bU1hwHRZfy4cpPGrAVDdAXSARJRaRBrl4Y8nZx2SD34WCVzMZJVEvBPPkjVFJP0
 1XQuGvteORcuOD5Sc1XfEStsJUVo5Uim9IaF0tHrdXhkrlsNWgMTIxt9TIKdUOJ0
 JtPK/qNQz5xK4DYo5ny9yLEAxhUFmHoQZzRLWST27eeIxtSZLAErk/Jp64sSQ1uK
 tsHD++7PrjfniHxp+uVPZKi3BexM1CyvQ7sv/amQILgH4cUhWBx7kNZtb85muwWw
 OlgkFZino19oKmdu0w/1KgLAQ71PDo+oMcc+yR1PFWwGhaYR3n/MEsjmQI8/VvcA
 PrCOOrsrW4CNZGf6nN9xunsXMMXacWMdQBV0TspXRRmtFnXdSixp7AurJl8UFg7u
 7j8vUgn2HVOIvEnBxVQCOFT2nZLyEzRL+gXNjWxGs3WJsUlYGKjD7f/SGgo3ztQh
 4VxX0aXWk1vSQ/X1sszhF4GWHIgeeYYY06gvH0cXImRZhI5X0hrLuJrNt5vxoP+u
 RzsXGuHZ5VA0YxEHOPq/o7EmG1va0JnbuyGFvdR3QUOsqIG1Z/+5DZzdJybm0chq
 E+/X0juoMuY/ZB0BXi6t
 =aJJ+
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170119, which among other things updates copyright notices in all of
  the ACPICA files, fix a couple of issues in the ACPI EC and button
  drivers, fix modalias handling for non-discoverable devices with
  DT-compatible identification strings, add a suspend quirk for one
  platform and fix a message in the APEI code.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20170119 including:

      + Fixes related to the handling of the bit width and bit offset
        fields in Generic Address Structure (Lv Zheng)
      + ACPI resources handling fix related to invalid resource
        descriptors (Bob Moore)
      + Fix to enable implicit result conversion for several ASL library
        functions (Bob Moore)
      + Support for method invocations as target operands in AML (Bob
        Moore)
      + Fix to use a correct operand type for DeRefOf() in some
        situations (Bob Moore)
      + Utilities updates (Bob Moore, Lv Zheng)
      + Disassembler/debugger updates (David Box, Lv Zheng)
      + Build fixes (Colin Ian King, Lv Zheng)
      + Update of copyright notices in all files (Bob Moore)

   - Fix for modalias handling for SPI and I2C devices with
     DT-compatible identification strings (Dan O'Donovan)

   - Fixes for the ACPI EC and button drivers (Lv Zheng)

   - ACPI processor handling fix related to CPU hotplug (online/offline)
     on x86 (Vitaly Kuznetsov)

   - Suspend quirk to save/restore NVS memory over S3 transitions for
     Lenovo G50-45 (Zhang Rui)

   - Message formatting fix for the ACPI APEI code (Colin Ian King)"

* tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  ACPICA: Update version to 20170119
  ACPICA: Tools: Update common signon, remove compilation bit width
  ACPICA: Source tree: Update copyright notices to 2017
  ACPICA: Linuxize: Restore and fix Intel compiler build
  x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
  spi: acpi: Initialize modalias from of_compatible
  i2c: acpi: Initialize info.type from of_compatible
  ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()
  ACPI: save NVS memory for Lenovo G50-45
  ACPI, APEI, EINJ: fix malformed newline escape
  ACPI / button: Remove lid_init_state=method mode
  ACPI / button: Change default behavior to lid_init_state=open
  ACPI / EC: Use busy polling mode when GPE is not enabled
  ACPI / EC: Remove old CLEAR_ON_RESUME quirk
  ACPICA: Update version to 20161222
  ACPICA: Parser: Update parse info table for some operators
  ACPICA: Fix a problem with recent extra support for control method invocations
  ACPICA: Parser: Allow method invocations as target operands
  ACPICA: Fix for implicit result conversion for the ToXXX functions
  ACPICA: Resources: Not a valid resource if buffer length too long
  ..
2017-02-20 17:55:15 -08:00
Linus Torvalds
02c3de1105 Power management updates for v4.11-rc1
- Operating Performance Points (OPP) framework fixes, cleanups and
    switch over from RCU-based synchronization to reference counting
    using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach).
 
  - cpufreq core cleanups and documentation updates (Viresh Kumar,
    Rafael Wysocki).
 
  - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer).
 
  - New cpufreq-dt sub-driver for TI SoCs requiring special handling,
    like in the AM335x, AM437x, DRA7x, and AM57x families, along with
    new DT bindings for it (Dave Gerlach, Paul Gortmaker).
 
  - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian).
 
  - intel_pstate driver updates including a new sysfs knob to control
    the driver's operation mode and fixes related to the no_turbo
    sysfs knob and the hardware-managed P-states feature support
    (Rafael Wysocki, Srinivas Pandruvada).
 
  - New interface to export ultra-turbo frequencies for the powernv
    cpufreq driver (Shilpasri Bhat).
 
  - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
    Wei Yongjun).
 
  - devfreq core fixes, mostly related to the sysfs interface exported
    by it (Chanwoo Choi, Chris Diamand).
 
  - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
    Choi).
 
  - Device PM QoS extension to support CPUs and support for per-CPU
    wakeup (device resume) latency constraints in the cpuidle menu
    governor (Alex Shi).
 
  - Wakeup IRQs framework fixes (Grygorii Strashko).
 
  - Generic power domains framework update including a fix to make
    it handle asynchronous invocations of *noirq suspend/resume
    callbacks correctly (Ulf Hansson, Geert Uytterhoeven).
 
  - Assorted fixes and cleanups in the core suspend/hibernate code,
    PM QoS framework and x86 ACPI idle support code (Corentin Labbe,
    Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers).
 
  - Update of the analyze_suspend.py script is updated to version 4.5
    offering multiple improvements (Todd Brandt).
 
  - New tool for intel_pstate diagnostics using the pstate_sample
    tracepoint (Doug Smythies).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYq3IjAAoJEILEb/54YlRx/lYP+gNXhfETSzjd4kWSHy3FVEDb
 gc5rMiE2j0OYgVSXwBI7p4EqMPy56lSWBASvbF2o6v9CIxb880KLFEsMDCVHwn46
 6xfEnIRxf1oeRqn7EG9ZPIcTgNsUyvK+gah7zgLXu/0KU7ceXxygvNk47qpeOZ8f
 dKYgIk/TOSGPC8H2nsg8VBKlK/ZOj5hID4F3MmFw6yDuWVCYuh2EokYXS4Nx0JwY
 UQGpWtz+FWWs71vhgVl33GbPXWvPqA7OMe0btZ3RCnhnz4tA/mH+jDWiaspCdS3J
 vKGeZyZptjIMJcufm3X7s7ghYjELheqQusMODDXk4AaWQ5nz8V5/h7NThYfa9J1b
 M93Tb0rMb2MqUhBpv/M6D3qQroZmhq55QKfQrul3QWSOiQUzTWJcbbpyeBQ7nkrI
 F1qNqQfuCnBL/r9y7HpW8P2iFg9kCHkwTtXMdp/lzGXdKzSGtAUSkYg5ohnUzQTp
 2WCPTEk+5DxLVPjW5rDoZOotr5p1kdcdWBk6r3MEWRokZK6PJo7rJBcnTtXSo2mO
 lLRba006q+fTlI5wZtjAI0rOiS3JgtT6cRx7uPjZlze9TGjklJhdsCPJbM5gcOT+
 YiOxvqD+9if5QRSxiEZNj3bQ43wYhXmpctfIanyxziq09BPIPxvgfRR/BkUzc34R
 ps4CIvImim5v5xc8Zsbk
 =57xJ
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The majority of changes go into the Operating Performance Points (OPP)
  framework and cpufreq this time, followed by devfreq and some
  scattered updates all over.

  The OPP changes are mostly related to switching over from RCU-based
  synchronization, that turned out to be overly complicated and
  problematic, to reference counting using krefs.

  In the cpufreq land there are core cleanups, documentation updates, a
  new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
  SoCs that require special handling, ARM64 SoCs support for the qoriq
  driver, intel_pstate updates, powernv driver update and assorted
  fixes.

  The devfreq changes are mostly fixes related to the sysfs interface
  and some Exynos drivers updates.

  Apart from that, the cpuidle menu governor will support per-CPU PM QoS
  constraints for the wakeup latency now, some bugs in the wakeup IRQs
  framework are fixed, the generic power domains framework should handle
  asynchronous invocations of *noirq suspend/resume callbacks from now
  on, the analyze_suspend.py script is updated and there is a new tool
  for intel_pstate diagnostics.

  Specifics:

   - Operating Performance Points (OPP) framework fixes, cleanups and
     switch over from RCU-based synchronization to reference counting
     using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)

   - cpufreq core cleanups and documentation updates (Viresh Kumar,
     Rafael Wysocki)

   - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)

   - New cpufreq-dt sub-driver for TI SoCs requiring special handling,
     like in the AM335x, AM437x, DRA7x, and AM57x families, along with
     new DT bindings for it (Dave Gerlach, Paul Gortmaker)

   - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)

   - intel_pstate driver updates including a new sysfs knob to control
     the driver's operation mode and fixes related to the no_turbo sysfs
     knob and the hardware-managed P-states feature support (Rafael
     Wysocki, Srinivas Pandruvada)

   - New interface to export ultra-turbo frequencies for the powernv
     cpufreq driver (Shilpasri Bhat)

   - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Wei Yongjun)

   - devfreq core fixes, mostly related to the sysfs interface exported
     by it (Chanwoo Choi, Chris Diamand)

   - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
     Choi)

   - Device PM QoS extension to support CPUs and support for per-CPU
     wakeup (device resume) latency constraints in the cpuidle menu
     governor (Alex Shi)

   - Wakeup IRQs framework fixes (Grygorii Strashko)

   - Generic power domains framework update including a fix to make it
     handle asynchronous invocations of *noirq suspend/resume callbacks
     correctly (Ulf Hansson, Geert Uytterhoeven)

   - Assorted fixes and cleanups in the core suspend/hibernate code, PM
     QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
     Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)

   - Update of the analyze_suspend.py script is updated to version 4.5
     offering multiple improvements (Todd Brandt)

   - New tool for intel_pstate diagnostics using the pstate_sample
     tracepoint (Doug Smythies)"

* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
  MAINTAINERS: cpufreq: add bmips-cpufreq.c
  PM / QoS: Fix memory leak on resume_latency.notifiers
  PM / Documentation: Spelling s/wrtie/write/
  PM / sleep: Fix test_suspend after sleep state rework
  cpufreq: CPPC: add ACPI_PROCESSOR dependency
  cpufreq: make ti-cpufreq explicitly non-modular
  cpufreq: Do not clear real_cpus mask on policy init
  tools/power/x86: Debug utility for intel_pstate driver
  AnalyzeSuspend: fix drag and zoom bug in javascript
  PM / wakeirq: report a wakeup_event on dedicated wekup irq
  PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
  PM / wakeirq: Enable dedicated wakeirq for suspend
  cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
  cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  Documentation: dt: add bindings for ti-cpufreq
  PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
  cpufreq: qoriq: Don't look at clock implementation details
  cpufreq: qoriq: add ARM64 SoCs support
  PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
  cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
  ...
2017-02-20 17:41:31 -08:00
Linus Torvalds
7aa7d60811 LEDs for 4.11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYq0qJAAoJEL1qUBy3i3wmPCgP/3XMatJDziwedPfs1qZXNXPM
 LLFGsmCtSC79TXyWYg9jgDoLKbt2G8Rb1KAvfhhPd7H/HRQD0YjwEHEzYv6BYE7O
 yns6t1ea1pZUGtqwPjSwvVybdZZgOsDI8T6OxIv2Tj7m4sI9w26undFPnWF7dIyG
 Kv14fLncXh1q4iwaXSfjFokI3V+o1xUH/fvLaLQ7w0EgbQn6VTgdn+fJr6aM1LH5
 tcMyBnmaRg4D++erXPeqYxhRtG+Fn3NGolFjDWAXAxyxooVcyD9zJpdx65I2T03U
 eVUI7gIpB/niOnskVTwJsd/hKI/aow3lDU+tRWgZvicuM6Sj7GI1zKuVU13aoKFw
 TwcAnEE7oQJFuU4AmbDlHjso31cWcOOStKNFQXjOP1qbU6O5Q3SWaYET5cWaUNWM
 hanY/hoU3U40x7m64HM67TT6frz6jEbNorY/bUvVX+JHrJcKTFFReBeIMgrIT/St
 0wZNHptYeOjkLHB+jURgnBVm6bTc4DJjtjnCTFQ/kOOiPgo6CikXFzzBzJHgPI9L
 /NfOsT13v2R6BJlvHgjNqIbj1gRCFHSYGloI5PBWAG5hk5z38GcJPlqvWxCQWOXs
 NSfzLPUiavkfOW1U/OQTNHeeDZXKBuWMui1QlpTX3XkGPviDwtoGxezzgSAltdMo
 LxIt/v0G4q5xJV3nDR19
 =amlj
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "New features and improvements:

   - add new optional brightness_hw_changed attribute for the LEDs that
     may have their brightness level changed autonomously (outside of
     kernel control) by hardware / firmware. The attribute supports
     userspace notifications through POLLPRI events

   - add led_brightness_hw_mon tool that demonstrates how to use the
     aforementioned feature

   - add LED_ON enum for LEDs that can be only turned on/off, and don't
     allow setting other brightness levels

   - allow for adjusting heartbeat trigger blink brightness level

  Fixes and cleanups:

   - avoid harmless maybe-uninitialized warning in leds-ktd2692.c

   - add context to the existing example entries in common LED bindings
     to make the documentation more clear"

* tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: ledtrig-heartbeat: Make top brightness adjustable
  tools/leds: Add led_hw_brightness_mon program
  leds: class: Add new optional brightness_hw_changed attribute
  leds: ktd2692: avoid harmless maybe-uninitialized warning
  leds: add LED_ON brightness as boolean value
  DT: leds: Improve examples by adding some context
2017-02-20 17:31:23 -08:00
Linus Torvalds
8b5abde16b Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
 "A laundry list of changes: KASAN improvements/fixes for ptdump, a
  self-test fix, PAT cleanup and wbinvd() avoidance, removal of stale
  code and documentation updates"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ptdump: Add address marker for KASAN shadow region
  x86/mm/ptdump: Optimize check for W+X mappings for CONFIG_KASAN=y
  x86/mm/pat: Use rb_entry()
  x86/mpx: Re-add MPX to selftests Makefile
  x86/mm: Remove CONFIG_DEBUG_NX_TEST
  x86/mm/cpa: Avoid wbinvd() for PREEMPT
  x86/mm: Improve documentation for low-level device I/O functions
2017-02-20 15:57:19 -08:00
Linus Torvalds
8a9365a472 Merge branch 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpufeature updates from Ingo Molnar:
 "The main changes in this cycle were related to enable ring-3
  MONITOR/MWAIT instructions support on supported CPUs, by Grzegorz
  Andrejczuk and Piotr Luc"

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeature: Move RING3MWAIT feature to avoid conflicts
  x86/cpufeature: Enable RING3MWAIT for Knights Mill
  x86/cpufeature: Enable RING3MWAIT for Knights Landing
  x86/cpufeature: Add RING3MWAIT to CPU features
  x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
  x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
  x86/cpufeature: Add AVX512_VPOPCNTDQ feature
2017-02-20 14:37:08 -08:00
Linus Torvalds
4abaa800fd Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm update from Ingo Molnar:
 "This adds a new SYSRET testcase"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/x86: Add a selftest for SYSRET to noncanonical addresses
2017-02-20 14:03:03 -08:00
Linus Torvalds
42e1b14b6e Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Implement wraparound-safe refcount_t and kref_t types based on
     generic atomic primitives (Peter Zijlstra)

   - Improve and fix the ww_mutex code (Nicolai Hähnle)

   - Add self-tests to the ww_mutex code (Chris Wilson)

   - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
     Bueso)

   - Micro-optimize the current-task logic all around the core kernel
     (Davidlohr Bueso)

   - Tidy up after recent optimizations: remove stale code and APIs,
     clean up the code (Waiman Long)

   - ... plus misc fixes, updates and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  fork: Fix task_struct alignment
  locking/spinlock/debug: Remove spinlock lockup detection code
  lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
  lkdtm: Convert to refcount_t testing
  kref: Implement 'struct kref' using refcount_t
  refcount_t: Introduce a special purpose refcount type
  sched/wake_q: Clarify queue reinit comment
  sched/wait, rcuwait: Fix typo in comment
  locking/mutex: Fix lockdep_assert_held() fail
  locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
  locking/rwsem: Reinit wake_q after use
  locking/rwsem: Remove unnecessary atomic_long_t casts
  jump_labels: Move header guard #endif down where it belongs
  locking/atomic, kref: Implement kref_put_lock()
  locking/ww_mutex: Turn off __must_check for now
  locking/atomic, kref: Avoid more abuse
  locking/atomic, kref: Use kref_get_unless_zero() more
  locking/atomic, kref: Kill kref_sub()
  locking/atomic, kref: Add kref_read()
  locking/atomic, kref: Add KREF_INIT()
  ...
2017-02-20 13:23:30 -08:00
Linus Torvalds
7f4eb0a6d5 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "On the kernel side the main changes in this cycle were:

   - Add Intel Kaby Lake CPU support (Srinivas Pandruvada)

   - AMD uncore driver updates for fam17 (Janakarajan Natarajan)

   - Intel/PT updates and core events optimizations and cleanups
     (Alexander Shishkin)

   - cgroups events fixes (David Carrillo-Cisneros)

   - kprobes improvements (Masami Hiramatsu)

   - ... plus misc fixes and updates.

  On the tooling side the main changes were:

   - Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
     CC=clang, to, for instance, take advantage of better warnings
     (Arnaldo Carvalho de Melo):

   - Introduce the 'delta-abs' 'perf diff' compute method, that orders
     the histogram entries by the absolute value of the percentage delta
     for a function in two perf.data files, i.e. the functions that
     changed the most (increase or decrease in samples) comes first
     (Namhyung Kim)

   - Add support for parsing Intel uncore vendor event files and add
     uncore vendor events for the Intel server processors (Haswell,
     Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
     (Andi Kleen)

   - Introduce 'perf ftrace' a perf front end to the kernel's ftrace
     function and function_graph tracer, defaulting to the
     "function_graph" tracer, more work will be done in reviving this
     effort, forward porting it from its initial patch submission
     (Namhyung Kim)

   - Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
     hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)

   - Account thread wait time (off CPU time) separately: sleep, iowait
     and preempt, based on the prev_state of the last event, show the
     breakdown when using "perf sched timehist --state" (Namhyumg Kim)

   - Add more triggers to switch the output file (perf.data.TIMESTAMP).

     Now, in addition to switching to a different output file when
     receiving a SIGUSR2, one can also specify file size and time based
     triggers:

           perf record -a --switch-output=signal

     is equivalent to what we had before:

           perf record -a --switch-output

     While we can also ask for the file to be "sliced" by size, taking
     into account that that will happen only when we get woken up by the
     kernel, i.e. one has to take into account the --mmap-pages (the
     size of the perf mmap ring buffer):

           perf record -a --switch-output=2G

     will break the perf.data output into multiple files limited to 2GB
     of samples, right when generating the output.

     For time based samples, alert() will be used, so to have 1 minute
     limited perf.data output files:

          perf record -a --switch-output=1m

     (Jiri Olsa)

   - Improve 'perf trace' (Arnaldo Carvalho de Melo)

   - 'perf kallsyms' toy tool to look for extended symbol information on
     the running kernel and demonstrate the machine/thread/symbol APIs
     for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
     Melo)

   - ... plus tons of other changes, see the shortlog and Git log for
     details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
  perf tools: Add missing parse_events_error() prototype
  perf pmu: Fix check for unset alias->unit array
  perf tools: Be consistent on the type of map->symbols[] interator
  perf intel pt decoder: clang has no -Wno-override-init
  perf evsel: Do not put a variable sized type not at the end of a struct
  perf probe: Avoid accessing uninitialized 'map' variable
  perf tools: Do not put a variable sized type not at the end of a struct
  perf record: Do not put a variable sized type not at the end of a struct
  perf tests: Synthesize struct instead of using field after variable sized type
  perf bench numa: Make sure dprintf() is not defined
  Revert "perf bench futex: Sanitize numeric parameters"
  tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
  tools: Set the maximum optimization level according to the compiler being used
  tools: Suppress request for warning options not existent in clang
  samples/bpf: Reset global variables
  samples/bpf: Ignore already processed ELF sections
  samples/bpf: Add missing header
  perf symbols: dso->name is an array, no need to check it against NULL
  perf tests record: No need to test an array against NULL
  perf symbols: No need to check if sym->name is NULL
  ...
2017-02-20 12:21:13 -08:00
Linus Torvalds
f7458a5d63 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The RCU changes in this cycle are:

   - Dynticks updates, consolidating open-coded counter accesses into a
     well-defined API

   - SRCU updates: Simplify algorithm, add formal verification

   - Documentation updates

   - Miscellaneous fixes

   - Torture-test updates

  Most of the diffstat comes from the relatively large documentation
  update"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  srcu: Reduce probability of SRCU ->unlock_count[] counter overflow
  rcutorture: Add CBMC-based formal verification for SRCU
  srcu: Force full grace-period ordering
  srcu: Implement more-efficient reader counts
  rcu: Adjust FQS offline checks for exact online-CPU detection
  rcu: Check cond_resched_rcu_qs() state less often to reduce GP overhead
  rcu: Abstract extended quiescent state determination
  rcu: Abstract dynticks extended quiescent state enter/exit operations
  rcu: Add lockdep checks to synchronous expedited primitives
  rcu: Eliminate unused expedited_normal counter
  llist: Clarify comments about when locking is needed
  rcu: Fix comment in rcu_organize_nocb_kthreads()
  rcu: Enable RCU tracepoints by default to aid in debugging
  rcu: Make rcu_cpu_starting() use its "cpu" argument
  rcu: Add comment headers to expedited-grace-period counter functions
  rcu: Don't wake rcuc/X kthreads on NOCB CPUs
  rcu: Re-enable TASKS_RCU for User Mode Linux
  rcu: Once again use NMI-based stack traces in stall warnings
  rcu: Remove short-term CPU kicking
  rcu: Add long-term CPU kicking
  ...
2017-02-20 11:21:17 -08:00
Namhyung Kim
68ba32352d perf record: Honor --quiet option properly
It should call perf_quiet_option() to suppress messages.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-7-namhyung@kernel.org
[ Fix merge clash with 483635a9d0 ("perf record: Add -a as default target") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:50:36 -03:00
Namhyung Kim
eddaef8896 perf annotate: Add -q/--quiet option
The -q/--quiet option is to suppress any message.  Sometimes users just
want to see the numbers and it can be used for that case.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:47:18 -03:00
Namhyung Kim
63b42fce86 perf diff: Add -q/--quiet option
The -q/--quiet option is to suppress any message.  Sometimes users just
want to see the numbers and it can be used for that case.

Committer notes:

Before:

  # perf diff | head -10
  Failed to open /tmp/perf-6678.map, continuing without symbols
  Failed to open /tmp/perf-6678.map, continuing without symbols
  Failed to open /tmp/perf-2646.map, continuing without symbols
  # Event 'cycles'
  #
  # Baseline  Delta Abs  Shared Object               Symbol
  # ........  .........  ..........................  ............................................
  #
       5.36%     -1.76%  [kernel.vmlinux]            [k] intel_idle
       2.80%     +1.48%  firefox                     [.] 0x00000000000101fe
      57.12%     -1.25%  libxul.so                   [.] 0x00000000009bea92
       1.36%     -1.11%  [kernel.vmlinux]            [k] __schedule
       4.26%     -1.00%  perf-6678.map               [.] 0x00007fac4b0e9320

After:

  # perf diff -q | head -10
       5.36%     -1.76%  [kernel.vmlinux]            [k] intel_idle
       2.80%     +1.48%  firefox                     [.] 0x00000000000101fe
      57.12%     -1.25%  libxul.so                   [.] 0x00000000009bea92
       1.36%     -1.11%  [kernel.vmlinux]            [k] __schedule
       4.26%     -1.00%  perf-6678.map               [.] 0x00007fac4b0e9320
       1.86%     +0.95%  [kernel.vmlinux]            [k] update_blocked_averages
       0.80%     -0.70%  [kernel.vmlinux]            [k] native_sched_clock
       0.74%     -0.58%  [kernel.vmlinux]            [k] native_write_msr
       0.76%     -0.56%  qemu-system-x86_64          [.] 0x00000000002395c0
                 +0.54%  libpulsecommon-10.0.so      [.] 0x000000000002d91b
  #

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:47:08 -03:00
Namhyung Kim
27fafab59a perf report: Add -q/--quiet option
The -q/--quiet option is to suppress any message.  Sometimes users just
want to see the numbers and it can be used for that case.

Before:

  $ perf report | head -15
  Failed to open /lib/modules/3.19.3-3-ARCH/kernel/fs/ext4/ext4.ko.gz, continuing without symbols
  Failed to open /lib/modules/3.19.3-3-ARCH/kernel/fs/jbd2/jbd2.ko.gz, continuing without symbols
  Failed to open /tmp/perf-14507.map, continuing without symbols
  ...
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 39K of event 'cycles'
  # Event count (approx.): 30444796573
  #
  # Overhead  Command      Shared Object        Symbol
  # ........  ...........  ...................  .........................
  #
       9.28%  swapper	   [kernel.vmlinux]     [k] intel_idle
       5.64%  swapper	   [kernel.vmlinux]     [k] native_write_msr_safe
       1.93%  swapper	   [kernel.vmlinux]     [k] __switch_to
       1.89%  swapper	   [kernel.vmlinux]     [k] menu_select
       1.75%  sched-pipe   [kernel.vmlinux]     [k] __switch_to

After:

  $ perf report -q | head
       9.28%  swapper	   [kernel.vmlinux]     [k] intel_idle
       5.64%  swapper	   [kernel.vmlinux]     [k] native_write_msr_safe
       1.93%  swapper	   [kernel.vmlinux]     [k] __switch_to
       1.89%  swapper	   [kernel.vmlinux]     [k] menu_select
       1.75%  sched-pipe   [kernel.vmlinux]     [k] __switch_to
       1.67%  swapper	   [kernel.vmlinux]     [k] cpu_startup_entry
       1.48%  sched-pipe   [kernel.vmlinux]     [k] enqueue_entity
       1.46%  swapper	   [kernel.vmlinux]     [k] __schedule
       1.36%  swapper	   [kernel.vmlinux]     [k] native_read_tsc
       1.34%  sched-pipe   [kernel.vmlinux]     [k] __schedule

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-4-namhyung@kernel.org
[ Removed builtin-report.c verbose > 0 hunk added to the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:46:58 -03:00
Namhyung Kim
bb963e1650 perf utils: Check verbose flag properly
It now can have negative value to suppress the message entirely.  So it
needs to check it being positive.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:35:54 -03:00
Namhyung Kim
80df198820 perf utils: Add perf_quiet_option()
The perf_quiet_option() is to suppress all messages.  It's intended to
be called just after parsing options.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:16:32 -03:00
Rafael J. Wysocki
014f40393e Merge branch 'acpica'
* acpica: (22 commits)
  ACPICA: Update version to 20170119
  ACPICA: Tools: Update common signon, remove compilation bit width
  ACPICA: Source tree: Update copyright notices to 2017
  ACPICA: Linuxize: Restore and fix Intel compiler build
  ACPICA: Update version to 20161222
  ACPICA: Parser: Update parse info table for some operators
  ACPICA: Fix a problem with recent extra support for control method invocations
  ACPICA: Parser: Allow method invocations as target operands
  ACPICA: Fix for implicit result conversion for the ToXXX functions
  ACPICA: Resources: Not a valid resource if buffer length too long
  ACPICA: Utilities: Update debug output
  ACPICA: Disassembler: Add Switch/Case disassembly support
  ACPICA: EFI: Add efihello demo application
  ACPICA: MSVC: Fix MSVC6 build issues
  ACPICA: Linux-specific header: Add support for s390x compilation
  ACPICA: Hardware: Add sleep register hooks
  ACPICA: Macro header: Fix some typos in comments
  ACPICA: Hardware: Sort access bit width algorithm
  ACPICA: Utilities: Add power of two rounding support
  ACPICA: Hardware: Add access_width/bit_offset support in acpi_hw_write()
  ...
2017-02-20 14:27:08 +01:00
Rafael J. Wysocki
eee77a8a0d Merge branch 'pm-tools'
* pm-tools:
  tools/power/x86: Debug utility for intel_pstate driver
  AnalyzeSuspend: fix drag and zoom bug in javascript
  scripts: analyze_suspend.py: Update to upstream v4.5
  scripts: analyze_suspend.py: Update to upstream v4.4
  scripts: analyze_suspend.py: Update to upstream v4.3
2017-02-20 14:26:34 +01:00
Al Viro
b8826e506e selftest for default_file_splice_read() infoleak
bug fixed in commit b9dc6f65bc ("fix a fencepost error in pipe_advance()")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-02-18 22:07:24 -05:00
Jiri Olsa
483635a9d0 perf record: Add -a as default target
Running 'perf record' with no target (-a, -p, -t, etc) will now collect
system wide data.

Commiter notes:

Testing it:

  [root@jouet ~]# perf record
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.351 MB perf.data (366 samples) ]
  #

is equivalent to:

  # perf record -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.411 MB perf.data (978 samples) ]
  #

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170217170018.GA15389@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 17:32:38 -03:00
Jiri Olsa
0d79f8b931 perf stat: Add -a as default target
Boris asked for default -a option in case we monitor only uncore events.

While implementing that I thought it might be actually useful to make it
overall default.

Running 'perf stat' will now collect system wide data.

Committer note:

Testing it:

  # perf stat
  ^C
   Performance counter stats for 'system wide':

         3571.559178      cpu-clock (msec)          #    4.000 CPUs utilized
               3,346      context-switches          #    0.937 K/sec
                 277      cpu-migrations            #    0.078 K/sec
              57,271      page-faults               #    0.016 M/sec
       4,535,633,835      cycles                    #    1.270 GHz
       6,389,736,516      instructions              #    1.41  insn per cycle
       1,541,293,875      branches                  #  431.547 M/sec
          14,526,396      branch-misses             #    0.94% of all branches

         0.892950118 seconds time elapsed

  #

Requested-and-Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170217170034.GB15389@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 17:31:10 -03:00
Jiri Olsa
99e7138eb7 perf tools: Fail on using multiple bits long terms without value
Currently we allow not to specify value for numeric terms and we set
them to value 1. This was originaly meant just for single bit terms to
allow user to type:

  $ perf record -e 'cpu/cpu-cycles,any'

instead of:

  $ perf record -e 'cpu/cpu-cycles,any=1'

However it works also for multi bits terms like:

  $ perf record -e 'cpu/event/' ls
  ...
  $ perf evlist -v
  ..., config: 0x1, ...

After discussion with Peter we decided making such term usage to fail,
like:

  $ perf record -e 'cpu/event/' ls
  event syntax error: 'cpu/event/'
                       \___ no value assigned for term
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 17:28:22 -03:00
Jiri Olsa
67b49b38f7 perf tools: Move new_term arguments into struct parse_events_term template
We need to add yet another parameter to new_term function in following
patch, so it's better to move first all the current params into template
struct parse_events_term and use it as a single argument.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 17:27:54 -03:00
Jiri Olsa
85e0d50965 perf build: Add special fixdep cleaning rule
Ingo reported following build failure:

On Sat, Feb 11, 2017 at 12:12:34PM +0100, Ingo Molnar wrote:
>
> So I had this oldish 32-bit 15.10 Ubuntu installation around (fully updated), and
> trying to build perf gave me:
>
> deimos:~/tip/tools/perf> make
>   BUILD:   Doing 'make -j4' parallel build
> make[3]: *** No rule to make target '/usr/include/x86_64-linux-gnu/sys/types.h', needed by 'fixdep.o'.  Stop.
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> Now this got a bit better after I did a 'make mrproper' in the kernel tree:
>
> deimos:~/tip/tools/perf> make
>   BUILD:   Doing 'make -j4' parallel build
>   HOSTCC   fixdep.o
> /home/mingo/tip/tools/build/fixdep: 1: /home/mingo/tip/tools/build/fixdep: Syntax error: "(" unexpected
> /home/mingo/tip/tools/build/Makefile.build:101: recipe for target 'fixdep.o' failed
> make[3]: *** [fixdep.o] Error 2
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> After some digging it turns out that my 'fixdep' binary was 64-bit:
>
> deimos:~/tip/tools/perf> file /home/mingo/tip/tools/build/fixdep
> /home/mingo/tip/tools/build/fixdep: ELF 64-bit LSB executable, x86-64, version 1
> (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
> 2.6.32, BuildID[sha1]=d527f736b57b5ba47210fbcb562a3b52867d21c1, not stripped
>
> But it did not get cleaned out by 'make clean'.
>
> Only after I did a 'make clean' in tools/ itself, did it get built properly.

It shows we don't clean up properly the fixdep objects, so adding
special rule for that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 16:04:38 -03:00
Jan Stancek
da8a58b56c perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in cpu_topology_map
There are 2 problems wrt. cpu_topology_map on systems with sparse CPUs:

1. offline/absent CPUs will have their socket_id and core_id set to -1
   which triggers:
   "socket_id number is too big.You may need to upgrade the perf tool."

2. size of cpu_topology_map (perf_env.cpu[]) is allocated based on
   _SC_NPROCESSORS_CONF, but can be indexed with CPU ids going above.
   Users of perf_env.cpu[] are using CPU id as index. This can lead
   to read beyond what was allocated:
   ==19991== Invalid read of size 4
   ==19991==    at 0x490CEB: check_cpu_topology (topology.c:69)
   ==19991==    by 0x490CEB: test_session_topology (topology.c:106)
   ...

For example:
  _SC_NPROCESSORS_CONF == 16
  available: 2 nodes (0-1)
  node 0 cpus: 0 6 8 10 16 22 24 26
  node 0 size: 12004 MB
  node 0 free: 9470 MB
  node 1 cpus: 1 7 9 11 23 25 27
  node 1 size: 12093 MB
  node 1 free: 9406 MB
  node distances:
  node   0   1
    0:  10  20
    1:  20  10

This patch changes HEADER_NRCPUS.nr_cpus_available from _SC_NPROCESSORS_CONF
to max_present_cpu and updates any user of cpu_topology_map to iterate
with nr_cpus_avail.

As a consequence HEADER_CPU_TOPOLOGY core_id and socket_id lists get longer,
but maintain compatibility with pre-patch state - index to cpu_topology_map is
CPU id.

  perf test 36 -v
  36: Session topology                           :
  --- start ---
  test child forked, pid 22211
  templ file: /tmp/perf-test-gmdX5i
  CPU 0, core 0, socket 0
  CPU 1, core 0, socket 1
  CPU 6, core 10, socket 0
  CPU 7, core 10, socket 1
  CPU 8, core 1, socket 0
  CPU 9, core 1, socket 1
  CPU 10, core 9, socket 0
  CPU 11, core 9, socket 1
  CPU 16, core 0, socket 0
  CPU 22, core 10, socket 0
  CPU 23, core 10, socket 1
  CPU 24, core 1, socket 0
  CPU 25, core 1, socket 1
  CPU 26, core 9, socket 0
  CPU 27, core 9, socket 1
  test child finished with 0
  ---- end ----
  Session topology: Ok

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/d7c05c6445fca74a8442c2c73cfffd349c52c44f.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 12:56:35 -03:00
Jan Stancek
43db2843a4 perf header: Make build_cpu_topology skip offline/absent CPUs
When build_cpu_topo() encounters offline/absent CPUs, it fails to find any
sysfs entries and returns failure.

This leads to build_cpu_topology() and write_cpu_topology() failing as
well.

Because HEADER_CPU_TOPOLOGY has not been written, read leaves cpu_topology_map
NULL and we get NULL ptr deref at:

  ...
   cmd_test
    __cmd_test
     test_and_print
      run_test
       test_session_topology
        check_cpu_topology

  36: Session topology                           :
  --- start ---
  test child forked, pid 14902
  templ file: /tmp/perf-test-4CKocW
  failed to write feature HEADER_CPU_TOPOLOGY
  perf: Segmentation fault
  Obtained 9 stack frames.
  ./perf(sighandler_dump_stack+0x41) [0x5095f1]
  /lib64/libc.so.6(+0x35250) [0x7f4b7c3c9250]
  ./perf(test_session_topology+0x1db) [0x490ceb]
  ./perf() [0x475b68]
  ./perf(cmd_test+0x5b9) [0x4763c9]
  ./perf() [0x4945a3]
  ./perf(main+0x69f) [0x427e8f]
  /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f4b7c3b5b35]
  ./perf() [0x427fb9]
  test child interrupted
  ---- end ----
  Session topology: FAILED!

This patch makes build_cpu_topology() skip offline/absent CPUs, by checking
their presence against cpu_map built from online CPUs.

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/a271b770175524f4961d4903af33798358a4a518.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 12:37:04 -03:00
Jan Stancek
92a7e12780 perf cpumap: Add cpu__max_present_cpu()
Similar to cpu__max_cpu() (which returns the max possible CPU), returns
the max present CPU.

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8ea4601b5cacc49927235b4ebac424bd6eeccb06.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 12:33:05 -03:00
Arnaldo Carvalho de Melo
8074bf51fe perf session: Fix DEBUG=1 build with clang
The struct branch_stack->branch_stack.cycles field is a u64 :16
bitfield, and this somehow confuses clang 4.0 when checking the
arguments of a printf format, so cast the :16 to unsigned short to help
it.

Silences this:

  util/session.c:935:4: error: format specifies type 'unsigned short' but the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat]
                          e->flags.cycles,
                          ^~~~~~~~~~~~~~~
  1 error generated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eo2t4uhlbne105z72tvyzkp1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 12:27:26 -03:00
Steven Rostedt (VMware)
9c72fd0ff0 tools lib traceevent: It's preempt not prempt
Fix the typo of the function name pevent_data_prempt_count()

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: c52d9e4e67 ("tools lib traceevent: Add retrieval of preempt count and latency flags")
Link: http://lkml.kernel.org/r/20170216201352.469c99de@grimm.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 10:31:44 -03:00
Arnaldo Carvalho de Melo
4be92cf018 perf python: Filter out -specs=/a/b/c from the python binding cc options
The -spec=/path/to/file can be used to change what gcc puts in the cc,
ld, etc command lines, but this is not present in clang, filter it out
at the setup.py file by changing python2's internal variable where it
keeps its initial CFLAGS value.

With this all of perf can be built in at least Fedora 25, fixing this
problem:

    GEN      /tmp/build/perf/python/perf.so
    CC       /tmp/build/perf/builtin-buildid-list.o
  clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
  clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
  error: command 'clang' failed with exit status 1

Now I need to change all the containers where I have clang to build
perf with it, so that we can check that in other distros (opensuse, debian,
ubuntu, etc) this also works.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g9lhgr162ao8ao29vvf0hgm1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 10:31:13 -03:00
Arnaldo Carvalho de Melo
8bd8c65333 tools perf scripting python: clang doesn't have -spec, remove it
Gcc has a -spec option to override what options to pass to cc, etc, and
in some distros this is used, like in fedora, where we end up getting
this passed to gcc that makes clang, that doesn't have this option to
stop the build:

  CC       /tmp/build/perf/util/scripting-engines/trace-event-python.o
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]

So filter this out when the compiler used is clang, this way we
can build the python scripting support in tools/perf/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2gosxoiouf24pnlknp7w7q4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17 10:31:13 -03:00
David S. Miller
3f64116a83 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-02-16 19:34:01 -05:00
Thomas Gleixner
5b1ad68f9b Merge branch 'linus' into x86/mm
Make sure to get the latest fixes before applying the ptdump enhancements.
2017-02-16 19:51:27 +01:00
Linus Torvalds
3c7a9f32f9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) In order to avoid problems in the future, make cgroup bpf overriding
    explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov.

 2) LLC sets skb->sk without proper skb->destructor and this explodes,
    fix from Eric Dumazet.

 3) Make sure when we have an ipv4 mapped source address, the
    destination is either also an ipv4 mapped address or
    ipv6_addr_any(). Fix from Jonathan T. Leighton.

 4) Avoid packet loss in fec driver by programming the multicast filter
    more intelligently. From Rui Sousa.

 5) Handle multiple threads invoking fanout_add(), fix from Eric
    Dumazet.

 6) Since we can invoke the TCP input path in process context, without
    BH being disabled, we have to accomodate that in the locking of the
    TCP probe. Also from Eric Dumazet.

 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we
    aren't even updating that sysctl value. From Marcus Huewe.

 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon.

[ This is the second version of the pull that reverts the nested
  rhashtable changes that looked a bit too scary for this late in the
  release  - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  rhashtable: Revert nested table changes.
  ibmvnic: Fix endian errors in error reporting output
  ibmvnic: Fix endian error when requesting device capabilities
  net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification
  net: xilinx_emaclite: fix freezes due to unordered I/O
  net: xilinx_emaclite: fix receive buffer overflow
  bpf: kernel header files need to be copied into the tools directory
  tcp: tcp_probe: use spin_lock_bh()
  uapi: fix linux/if_pppol2tp.h userspace compilation errors
  packet: fix races in fanout_add()
  ibmvnic: Fix initial MTU settings
  net: ethernet: ti: cpsw: fix cpsw assignment in resume
  kcm: fix a null pointer dereference in kcm_sendmsg()
  net: fec: fix multicast filtering hardware setup
  ipv6: Handle IPv4-mapped src to in6addr_any dst.
  ipv6: Inhibit IPv4-mapped src address on the wire.
  net/mlx5e: Disable preemption when doing TC statistics upcall
  rhashtable: Add nested tables
  tipc: Fix tipc_sk_reinit race conditions
  gfs2: Use rhashtable walk interface in glock_hash_walk
  ...
2017-02-16 08:37:18 -08:00
Doug Smythies
48385dd740 tools/power/x86: Debug utility for intel_pstate driver
This utility can be used to debug and tune the performance of the
intel_pstate driver.

This utility can be used in two ways:

 - If there is Linux trace file with pstate_sample events enabled, then
   this utility can parse the trace file and generate performance plots.

 - If user has not specified a trace file as input via command line
   parameters, then this utility enables and collects trace data for a
   user-specified interval and generates performance plots.

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-16 00:54:57 +01:00
Mickaël Salaün
d498f8719a bpf: Rebuild bpf.o for any dependency update
This is needed to force a rebuild of bpf.o when one of its dependencies
(e.g. uapi/linux/bpf.h) is updated.

Add a phony target.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15 12:16:17 -05:00
Mickaël Salaün
cdc6a4ba88 bpf: Remove redundant ifdef
Remove a useless ifdef __NR_bpf as requested by Wang Nan.

Inline one-line static functions as it was in the bpf_sys.h file.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/828ab1ff-4dcf-53ff-c97b-074adb895006@huawei.com
Acked-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15 12:14:54 -05:00
Arnaldo Carvalho de Melo
34a0548f01 perf tools: Add missing parse_events_error() prototype
As pointed out by clang, we were not providing a prototype for a
function before using it:

  util/parse-events.y:699:6: error: conflicting types for 'parse_events_error'
  void parse_events_error(YYLTYPE *loc, void *data,
       ^
  /tmp/build/perf/util/parse-events-bison.c:2224:7: note: previous implicit declaration is here
        yyerror (&yylloc, _data, scanner, YY_("syntax error"));
        ^
  /tmp/build/perf/util/parse-events-bison.c:65:25: note: expanded from macro 'yyerror'
  #define yyerror         parse_events_error

  1 error generated.

One line fix it.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170215130605.GC4020@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-15 11:20:49 -03:00
Arnaldo Carvalho de Melo
b30a7d1fc9 perf pmu: Fix check for unset alias->unit array
The alias->unit field is an array, so to check that it is not set we
should see if it is an empty string, i.e. alias->unit[0], instead of
checking alias->unit != NULL, as this will _always_ evaluate to 'true'.

Pointed out by clang.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-15 10:06:20 -03:00
Stephen Rothwell
5463b3d043 bpf: kernel header files need to be copied into the tools directory
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 22:27:31 -05:00
Jacek Anaszewski
ae3473231e tools/leds: Add led_hw_brightness_mon program
LED subsystem supports POLLPRI on "brightness_hw_changed" sysfs file
of LED class devices. This tool demonstrates how to use the feature.

Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2017-02-14 22:20:23 +01:00
Arnaldo Carvalho de Melo
a0b2f5af4c perf tools: Be consistent on the type of map->symbols[] interator
In a few cases we were using 'enum map_type' and that triggered this
warning when using clang:

  util/session.c:1923:16: error: comparison of constant 2 with expression of type 'enum map_type' is always true
      [-Werror,-Wtautological-constant-out-of-range-compare]
        for (i = 0; i < MAP__NR_TYPES; ++i) {

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i6uyo6bsopa2dghnx8qo7rri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 16:19:56 -03:00
Arnaldo Carvalho de Melo
35670dd0c9 perf intel pt decoder: clang has no -Wno-override-init
So set it only for other compilers, allowing us to overcome yet another
build failure due to an inexistent clang -W option:

  error: unknown warning option '-Wno-override-init'; did you mean '-Wno-override-module'? [-Werror,-Wunknown-warning-option]

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-oaa1ici3j8nygp4pzl2oobh3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 16:18:02 -03:00
Arnaldo Carvalho de Melo
c24ae6d961 perf evsel: Do not put a variable sized type not at the end of a struct
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using a existing thread_map and
cpu_map constructors:

With this we avoid this while compiling with clang:

  util/evsel.c:1659:17: error: field 'map' with variable sized type 'struct cpu_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
          struct cpu_map map;
                         ^
  util/evsel.c:1667:20: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
          struct thread_map map;
                            ^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-207juvrqjiar7uvas2s83v5i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:56:54 -03:00
Arnaldo Carvalho de Melo
8a2efd6dd5 perf probe: Avoid accessing uninitialized 'map' variable
Genuine problem detected with clang, the warnings are spot on:

  util/probe-event.c:2079:7: error: variable 'map' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
                  if (addr) {
                      ^~~~
  util/probe-event.c:2094:6: note: uninitialized use occurs here
          if (map && !is_kprobe) {
              ^~~
  util/probe-event.c:2079:3: note: remove the 'if' if its condition is always true
                  if (addr) {
                  ^~~~~~~~~~
  util/probe-event.c:2075:8: error: variable 'map' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
                          if (kernel_get_symbol_address_by_name(tp->symbol,
                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/probe-event.c:2094:6: note: uninitialized use occurs here
          if (map && !is_kprobe) {
              ^~~
  util/probe-event.c:2075:4: note: remove the 'if' if its condition is always false
                          if (kernel_get_symbol_address_by_name(tp->symbol,
                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/probe-event.c:2064:17: note: initialize the variable 'map' to silence this warning
          struct map *map;
                         ^
                          = NULL

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m3501el55i10hctfbmi2qxzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:28:41 -03:00
Arnaldo Carvalho de Melo
89896051f8 perf tools: Do not put a variable sized type not at the end of a struct
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using an existing thread_map
constructor.

With this we avoid this while compiling with clang:

  util/parse-events.c:2024:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
                  struct thread_map map;
                                  ^
  1 error generated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tqocbplnyyhpst6drgm2u4m3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:19 -03:00
Arnaldo Carvalho de Melo
9d6aae7254 perf record: Do not put a variable sized type not at the end of a struct
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using an existing thread_map
constructor.

With this we avoid this while compiling with clang:

  builtin-record.c:659:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
                  struct thread_map map;
                                    ^
  1 error generated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c9drclo52ezxmwa7qxklin2y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:19 -03:00
Arnaldo Carvalho de Melo
423d856a4d perf tests: Synthesize struct instead of using field after variable sized type
End result is the same, its an ABI, so the struct won't change, avoid
using a GNU extension, so that we can catch other cases that may be bugs.

Caught when building with clang:

  tests/parse-no-sample-id-all.c:53:20: error: field 'attr' with variable sized type 'struct attr_event' not at the end of a struct or class is a GNU extension
        [-Werror,-Wgnu-variable-sized-type-not-at-end]
          struct attr_event attr;
                            ^
  1 error generated.

Testing it:

  # perf test sample_id
  24: Parse with no sample_id_all bit set        : Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e2vs1x771fc208uvxnwcf08b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:18 -03:00
Arnaldo Carvalho de Melo
6aa4d82640 perf bench numa: Make sure dprintf() is not defined
When building with clang we get this error:

  bench/numa.c:46:9: error: 'dprintf' macro redefined [-Werror,-Wmacro-redefined]
  #define dprintf(x...) do { if (g && g->p.show_details >= 1) printf(x); } while (0)
          ^
  /usr/include/bits/stdio2.h:145:12: note: previous definition is here
  #   define dprintf(fd, ...) \
             ^
    CC       /tmp/build/perf/tests/parse-no-sample-id-all.o
  1 error generated.

So, make sure it is undefined before using that name.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jakub Jelen <jjelen@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f654o2svtrutamvxt7igwz74@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:18 -03:00
Arnaldo Carvalho de Melo
16cab3226f Revert "perf bench futex: Sanitize numeric parameters"
This reverts commit 60758d6668.

Now that libsubcmd makes sure that OPT_UINTEGER options will not
return negative values, we can revert this patch while addressing
the problem it solved:

  # perf bench futex hash -t  -4
  # Running 'futex/hash' benchmark:
   Error: switch `t' expects an unsigned numerical value
   Usage: perf bench futex hash <options>

      -t, --threads <n>     Specify amount of threads
  # perf bench futex hash -t-4
  # Running 'futex/hash' benchmark:
   Error: switch `t' expects an unsigned numerical value
   Usage: perf bench futex hash <options>

      -t, --threads <n>     Specify amount of threads
  #

IMO it is more reasonable to flat out refuse to process a negative
number than to silently turn it into an absolute value.

This also helps in silencing clang's complaint about asking for an
absolute value of an unsigned integer:

  bench/futex-hash.c:133:10: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
          nsecs = futexbench_sanitize_numeric(nsecs);
                ^
  bench/futex.h:104:42: note: expanded from macro 'futexbench_sanitize_numeric'
  #define futexbench_sanitize_numeric(__n) abs((__n))
                                           ^
  bench/futex-hash.c:133:10: note: remove the call to 'abs' since unsigned values cannot be negative

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2kl68v22or31vw643m2exz8x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:17 -03:00
Arnaldo Carvalho de Melo
b988971662 tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
Options marked OPTION_UINTEGER or OPTION_U64 clearly indicates that an
unsigned value is expected, so just error out when a negative value is
passed, instead of returning something undesired to the tool.

E.g.:

  # perf bench futex hash -t -4
  # Running 'futex/hash' benchmark:
   Error: switch `t' expects an unsigned numerical value
   Usage: perf bench futex hash <options>

      -t, --threads <n>     Specify amount of threads
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mdn8s2raatyhz7tamrsz22r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 15:19:17 -03:00
Michael Ellerman
68bd42d97c selftests/powerpc: Fix remaining fallout from recent changes
In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT).

In math the vmx and fpu names were typoed so they no longer matched
correctly, put back the 'v' and 'f'.

In tm we need to substitute $(OUTPUT) into SIGNAL_CONTEXT_CHK_TESTS so
that the rule matches.

In pmu there is an extraneous ':' on the end of $$BUILD_TARGET for the
clean and install rules, which breaks the logic in the child Makefiles.

Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-14 08:02:27 -07:00
Michael Ellerman
2e8ec87dad selftests/powerpc: Fix the clean rule since recent changes
The clean rule is broken for the powerpc tests:

  make[1]: Entering directory 'tools/testing/selftests/powerpc'
  Makefile:63: warning: overriding recipe for target 'clean'
  ../lib.mk:51: warning: ignoring old recipe for target 'clean'
  /bin/sh: 3: Syntax error: end of file unexpected (expecting "done")
  Makefile:63: recipe for target 'clean' failed

Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-14 08:02:20 -07:00
Michael Ellerman
634ce97cdf selftests: Fix the .S and .S -> .o rules
Both these rules incorrectly use $< (first prerequisite) rather than
$^ (all prerequisites), meaning they don't work if we're using more than
one .S file as input. Switch them to using $^.

They also don't include $(CPPFLAGS) and other variables used in the
default rules, which breaks targets that require those. Fix that by
using the builtin $(COMPILE.S) and $(LINK.S) rules.

Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-14 08:02:01 -07:00
Michael Ellerman
2047f1d8ba selftests: Fix the .c linking rule
Currently we can't build some tests, for example:

  $ make -C tools/testing/selftests/ TARGETS=vm
  ...
  gcc -Wall -I ../../../../usr/include   -lrt -lpthread ../../../../usr/include/linux/kernel.h userfaultfd.c -o tools/testing/selftests/vm/userfaultfd
  /tmp/ccmOkQSM.o: In function `stress':
  userfaultfd.c:(.text+0xc60): undefined reference to `pthread_create'
  userfaultfd.c:(.text+0xca5): undefined reference to `pthread_create'
  userfaultfd.c:(.text+0xcee): undefined reference to `pthread_create'
  userfaultfd.c:(.text+0xd30): undefined reference to `pthread_create'
  userfaultfd.c:(.text+0xd77): undefined reference to `pthread_join'
  userfaultfd.c:(.text+0xe7d): undefined reference to `pthread_join'
  userfaultfd.c:(.text+0xe9f): undefined reference to `pthread_cancel'
  userfaultfd.c:(.text+0xec6): undefined reference to `pthread_join'
  userfaultfd.c:(.text+0xf14): undefined reference to `pthread_join'
  /tmp/ccmOkQSM.o: In function `userfaultfd_stress':
  userfaultfd.c:(.text+0x13e2): undefined reference to `pthread_attr_setstacksize'
  collect2: error: ld returned 1 exit status

This is because the rule for linking .c files to binaries is incorrect.

The first bug is that it uses $< (first prerequisite) instead of $^ (all
preqrequisites), fix it by using ^$.

Secondly the ordering of the prerequisites vs $(LDLIBS) is wrong,
meaning on toolchains that use --as-needed we fail to link (as above).
Fix that by placing $(LDLIBS) *after* ^$.

Finally switch to using the default rule $(LINK.c), so that we get
$(CPPFLAGS) etc. included.

Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-14 08:01:55 -07:00
Michael Ellerman
d83c3ba0b9 selftests: Fix selftests build to just build, not run tests
In commit 88baa78d1f ("selftests: remove duplicated all and clean
target"), the "all" target was removed from individual Makefiles and
added to lib.mk.

However the "all" target was added to lib.mk *after* the existing
"runtests" target. This means "runtests" becomes the first (default)
target for most of our Makefiles.

This has the effect of causing a plain "make" to build *and run* the
tests. Which is at best rude, but depending on which tests are run could
oops someone's build machine.

  $ make -C tools/testing/selftests/
  ...
  make[1]: Entering directory 'tools/testing/selftests/bpf'
  gcc -Wall -O2 -I../../../../usr/include   test_verifier.c -o tools/testing/selftests/bpf/test_verifier
  gcc -Wall -O2 -I../../../../usr/include   test_maps.c -o tools/testing/selftests/bpf/test_maps
  gcc -Wall -O2 -I../../../../usr/include   test_lru_map.c -o tools/testing/selftests/bpf/test_lru_map
   add+sub+mul FAIL
  Failed to load prog 'Function not implemented'!
   unreachable FAIL
  Unexpected error message!
   unreachable2 FAIL
  ...

Fix it by moving the "all" target to the start of lib.mk, making it the
default target.

Fixes: 88baa78d1f ("selftests: remove duplicated all and clean target")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-14 08:01:44 -07:00
Arnaldo Carvalho de Melo
49b3cd306e tools: Set the maximum optimization level according to the compiler being used
To avoid this when using clang:

  warning: optimization level '-O6' is not supported; using '-O3' instead

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaghp8ddvzdsg03putemcq96@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 10:55:27 -03:00
Arnaldo Carvalho de Melo
093b75ef59 tools: Suppress request for warning options not existent in clang
To allow building with clang, avoiding:

  error: unknown warning option '-Wstrict-aliasing=3'; did you mean '-Wstring-plus-int'? [-Werror,-Wunknown-warning-option]

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvthlvmhzfnt7jx73jgmaea1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14 10:34:35 -03:00
Rehas Sachdeva
c6ce3e2fe3 radix tree test suite: Add config option for map shift
Add config option "SHIFT=<value>" to Makefile for building test suite
with any value of RADIX_TREE_MAP_SHIFT between 3 and 7 inclusive.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
[mawilcox@microsoft.com: .gitignore, quieten grep, remove on clean]
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:10 -05:00
Matthew Wilcox
c0cdbf819c radix tree test suite: Run iteration tests for longer
If the -l flag is set, run the tests for 100 seconds each instead of
the normal 10 seconds.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:08 -05:00
Matthew Wilcox
3b7869c31f radix tree test suite: Fix split/join memory leaks
The last of the memory leaks in the test suite was a couple of places in
the split/join testing where I forgot to free the element being removed
from the tree.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:08 -05:00
Matthew Wilcox
6da0396cac radix tree test suite: Fix leaks in regression2.c
None of the malloc'ed data structures were ever being freed.  Found with
-fsanitize=address.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:07 -05:00
Matthew Wilcox
18d0c57394 radix tree test suite: Fix leaky tests
If item_insert() or item_insert_order() failed to insert an item, they
would leak the item they had just created.  This was causing runaway
memory consumption while running the iteration_check testcase, which
proves that Ross has too much memory in his workstation ;-)

Make sure to free the item on error.  Found with -fsanitize=address.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:06 -05:00
Matthew Wilcox
829f83d365 radix tree test suite: Enable address sanitizer
I was looking for a memory scribble and instead found a pile of memory
leaks.  Ensure no more occur in future.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:06 -05:00
Matthew Wilcox
1293d5c5f5 radix-tree: Chain preallocated nodes through ->parent
Chaining through the ->private_data member means we have to zero
->private_data after removing preallocated nodes from the list.
We're about to initialise ->parent anyway, so we can avoid zeroing it.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:04 -05:00
Rehas Sachdeva
73bc029b76 radix tree test suite: Dial down verbosity with -v
Make the output of radix tree test suite less verbose by default and add
-v and -vv command line options for increasing level of verbosity.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:04 -05:00
Matthew Wilcox
5eeb2d23df radix tree test suite: Introduce kmalloc_verbose
To help track down where memory leaks may be, add the ability to turn
on/off printing allocations, frees and delayed frees.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:03 -05:00
Matthew Wilcox
8ac0486831 radix tree test suite: Build separate binaries for some tests
To allow developers to run a subset of tests, build separate multiorder
and idr-test binaries which will run just the tests in those files.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 21:44:02 -05:00
Matthew Wilcox
d37cacc5ad ida: Use exceptional entries for small IDAs
We can use the root entry as a bitmap and save allocating a 128 byte
bitmap for an IDA that contains only a few entries (30 on a 32-bit
machine, 62 on a 64-bit machine).  This costs about 300 bytes of kernel
text on x86-64, so as long as 3 IDAs fall into this category, this
is a net win for memory consumption.

Thanks to Rasmus Villemoes for his work documenting the problem and
collecting statistics on IDAs.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:02 -05:00
Matthew Wilcox
7ad3d4d85c ida: Move ida_bitmap to a percpu variable
When we preload the IDA, we allocate an IDA bitmap.  Instead of storing
that preallocated bitmap in the IDA, we store it in a percpu variable.
Generally there are more IDAs in the system than CPUs, so this cuts down
on the number of preallocated bitmaps that are unused, and about half
of the IDA users did not call ida_destroy() so they were leaking IDA
bitmaps.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 21:44:01 -05:00
Matthew Wilcox
0a835c4f09 Reimplement IDR and IDA using the radix tree
The IDR is very similar to the radix tree.  It has some functionality that
the radix tree did not have (alloc next free, cyclic allocation, a
callback-based for_each, destroy tree), which is readily implementable on
top of the radix tree.  A few small changes were needed in order to use a
tag to represent nodes with free space below them.  More extensive
changes were needed to support storing NULL as a valid entry in an IDR.
Plain radix trees still interpret NULL as a not-present entry.

The IDA is reimplemented as a client of the newly enhanced radix tree.  As
in the current implementation, it uses a bitmap at the last level of the
tree.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2017-02-13 21:44:01 -05:00
Matthew Wilcox
bfa11193c4 radix tree test suite: Remove obsolete CONFIG
radix-tree.c doesn't use these CONFIG options any more.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 16:09:43 -05:00
Matthew Wilcox
991af734c4 radix tree test suite: Use vpath to find lib files
Instead of specifying how to build find_bit.o from lib/find_bit.o,
use vpath to tell make where to find find_bit.c.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 16:09:42 -05:00
Matthew Wilcox
ab3a1ffd11 radix tree test suite: Reduce kernel.h
Many of the definitions in the radix-tree kernel.h are redundant with
others in tools/include, or are no longer used, such as panic().
Move the definition of __init to init.h and in_interrupt() to preempt.h

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 16:09:42 -05:00
Matthew Wilcox
7a4f11b889 radix tree test suite: Remove export.h
The tools/include export.h contains everything we need.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 16:09:41 -05:00
Matthew Wilcox
12ea65390b radix tree test suite: Remove types.h
Move the pieces we still need to tools/include and update a few implicit
includes.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-02-13 16:09:41 -05:00
Matthew Wilcox
a3c7890790 radix tree test suite: Remove mempool
The radix tree hasn't used a mempool since the beginning of git history.
Remove the userspace mempool implementation.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 16:09:36 -05:00
Matthew Wilcox
43a30c2a31 radix tree test suite: Depend on tools/include/asm files
Changing tools/include/asm/bug.h showed a missing dependency in the
Makefile.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Rehas Sachdeva <aquannie@gmail.com>
2017-02-13 16:08:47 -05:00
Arnaldo Carvalho de Melo
5eae7d8425 perf symbols: dso->name is an array, no need to check it against NULL
As it will always evaluate to 'true', as reported by clang:

  util/map.c:390:36: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
          if (map && map->dso && (map->dso->name || map->dso->long_name)) {
                                  ~~~~~~~~~~^~~~ ~~
  util/map.c:393:22: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
                  else if (map->dso->name)
                     ~~  ~~~~~~~~~~^~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-x8cu007cly40kfp8xnpi9kya@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:35 -03:00
Arnaldo Carvalho de Melo
9ef6839bcc perf tests record: No need to test an array against NULL
It will always evaluate to 'true', as clang warns:

    CC       /tmp/build/perf/tests/perf-record.o
    CC       /tmp/build/perf/tests/evsel-roundtrip-name.o
  tests/perf-record.c:69:24: error: comparison of array 'argv' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare]
          if (evlist == NULL || argv == NULL) {
                                ^~~~    ~~~~
  1 error generated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o4977g6p9b3peak9ct6ef48q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:34 -03:00
Arnaldo Carvalho de Melo
a7c3899c06 perf symbols: No need to check if sym->name is NULL
As it is an array, so will always evaluate to 'true', as reported by
clang:

  builtin-sched.c:2070:19: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
                  if (sym && sym->name) {
                          ~~ ~~~~~^~~~
  1 warning generated.

So just ditch all those useless checks.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ydpm927col06paixb775jjx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:34 -03:00
Arnaldo Carvalho de Melo
d6195a6a2c perf evsel: Inform how to make a sysctl setting permanent
When a tool can't open counters due to the kernel.perf_event_paranoit
sysctl setting, we inform how to tweak it to allow the operation to
succeed, in addition to that, suggest setting /etc/sysctl.conf to
make the setting permanent.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4gwe99k4a6p12d4u8bbyttj2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:33 -03:00
Arnaldo Carvalho de Melo
e8c6f437fd tools lib traceevent plugin function: Initialize 'index' variable
Detected with clang:

    CC       /tmp/build/perf/plugin_function.o
  plugin_function.c:145:6: warning: variable 'index' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
          if (parent && ftrace_indent->set)
              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  plugin_function.c:148:29: note: uninitialized use occurs here
          trace_seq_printf(s, "%*s", index*3, "");
                                     ^~~~~
  plugin_function.c:145:2: note: remove the 'if' if its condition is always true
          if (parent && ftrace_indent->set)
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  plugin_function.c:145:6: warning: variable 'index' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
          if (parent && ftrace_indent->set)
              ^~~~~~
  plugin_function.c:148:29: note: uninitialized use occurs here
          trace_seq_printf(s, "%*s", index*3, "");
                                     ^~~~~
  plugin_function.c:145:6: note: remove the '&&' if its condition is always true
          if (parent && ftrace_indent->set)
              ^~~~~~~~~
  plugin_function.c:133:11: note: initialize the variable 'index' to silence this warning
          int index;
                   ^
                    = 0
  2 warnings generated.

Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b5wyjocel55gorl2jq2cbxrr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:33 -03:00
Steven Rostedt (VMware)
14e4d7e0ab tools lib traceevent: Initialize lenght on OLD_RING_BUFFER_TYPE_TIME_STAMP
A undefined value was being used for the OLD_RING_BUFFER_TYPE_TIME_STAMP
case entry, as the 'length' variable was not being initialized, fix it.

Caught by the reporter when building tools/perf/ using clang, which emmitted
this warning:

  kbuffer-parse.c:312:7: warning: variable 'length' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized]
          case OLD_RINGBUF_TYPE_TIME_EXTEND:
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  kbuffer-parse.c:339:29: note: uninitialized use occurs here
          kbuf->next = kbuf->index + length;
                                   ^~~~~~
  kbuffer-parse.c:297:21: note: initialize the variable 'length' to silence this warning
          unsigned int length;
                             ^
                              = 0

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170213121418.47f279e8@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:32 -03:00
Wang YanQing
d7dd112ea5 perf scripting perl: Fix compile error with some perl5 versions
Fix below compile error:

  CC       util/scripting-engines/trace-event-perl.o
  In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0,
                   from util/scripting-engines/trace-event-perl.c:31:
  /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow':
  /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs]
          dTHX;   /* The function called below requires thread context */
			     ^
  cc1: all warnings being treated as errors

After digging perl5 repository, I find out that we will meet this
compile error with perl from v5.21.1 to v5.25.4

Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknight
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 17:22:32 -03:00
Namhyung Kim
be57b3fd21 perf diff: Change default setting to "delta-abs"
The "delta-abs" compute method will show most changed entries on top.
So users can easily see how much effect between the data.  Note that it
also changes the default of -o option to 1 in order to apply the compute
method.  To see original-style (sorted by baseline) use -o 0 option.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170210161856.18422-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 14:29:38 -03:00
Namhyung Kim
4b35994abe perf diff: Add diff.compute config option
The diff.compute config variable is to set the default compute method of
perf diff command (-c option).  Possible values 'delta' (default),
'delta-abs', 'ratio' and 'wdiff'.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 14:29:37 -03:00
Namhyung Kim
d49dd15d69 perf diff: Add diff.order config option
In many cases, I need to look at differences between two data so I often
used the -o option to sort the result base on the difference first.
It'd be nice to have a config option to set it by default.

The diff.order config option is to set the default value of -o/--order
option.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 14:29:37 -03:00
Namhyung Kim
a1668c25a8 perf diff: Add 'delta-abs' compute method
The 'delta-abs' compute method is same as 'delta' but shows entries with
bigger absolute delta first instead of sorting numerically.  This is
only useful together with -o option.

Below is default output (-c delta):

  $ perf diff -o 1 -c delta | grep -v ^# | head
    42.22%   +4.97%  [kernel.kallsyms]  [k] cfb_imageblit
     0.62%   +1.23%  [kernel.kallsyms]  [k] mutex_lock
             +1.15%  [kernel.kallsyms]  [k] copy_user_generic_string
     2.40%   +0.95%  [kernel.kallsyms]  [k] bit_putcs
     0.31%   +0.79%  [kernel.kallsyms]  [k] link_path_walk
             +0.64%  [kernel.kallsyms]  [k] kmem_cache_alloc
     0.00%   +0.57%  [kernel.kallsyms]  [k] __rcu_read_unlock
             +0.45%  [kernel.kallsyms]  [k] alloc_set_pte
     0.16%   +0.45%  [kernel.kallsyms]  [k] menu_select
             +0.41%  ld-2.24.so         [.] do_lookup_x

Now with 'delta-abs' it shows entries have bigger delta value either
positive or negative.

  $ perf diff -o 1 -c delta-abs | grep -v ^# | head
    42.22%   +4.97%  [kernel.kallsyms]  [k] cfb_imageblit
    12.72%   -3.01%  [kernel.kallsyms]  [k] intel_idle
     9.72%   -1.31%  [unknown]          [.] 0x0000000000411343
     0.62%   +1.23%  [kernel.kallsyms]  [k] mutex_lock
     2.40%   +0.95%  [kernel.kallsyms]  [k] bit_putcs
     0.31%   +0.79%  [kernel.kallsyms]  [k] link_path_walk
     1.35%   -0.71%  [kernel.kallsyms]  [k] smp_call_function_single
     0.00%   +0.57%  [kernel.kallsyms]  [k] __rcu_read_unlock
     0.16%   +0.45%  [kernel.kallsyms]  [k] menu_select
     0.72%   -0.44%  [kernel.kallsyms]  [k] lookup_fast

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170210073614.24584-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 14:29:36 -03:00
Arnaldo Carvalho de Melo
192614010a tools include: Introduce linux/compiler-gcc.h
To match the kernel headers structure, setting up things that are
specific to gcc or to some specific version of gcc.

It gets included by linux/compiler.h when gcc is the compiler being
used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fabcqfq4asodq9t158hcs8t3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13 14:29:29 -03:00
Alexei Starovoitov
7f67763337 bpf: introduce BPF_F_ALLOW_OVERRIDE flag
If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
to the given cgroup the descendent cgroup will be able to override
effective bpf program that was inherited from this cgroup.
By default it's not passed, therefore override is disallowed.

Examples:
1.
prog X attached to /A with default
prog Y fails to attach to /A/B and /A/B/C
Everything under /A runs prog X

2.
prog X attached to /A with allow_override.
prog Y fails to attach to /A/B with default (non-override)
prog M attached to /A/B with allow_override.
Everything under /A/B runs prog M only.

3.
prog X attached to /A with allow_override.
prog Y fails to attach to /A with default.
The user has to detach first to switch the mode.

In the future this behavior may be extended with a chain of
non-overridable programs.

Also fix the bug where detach from cgroup where nothing is attached
was not throwing error. Return ENOENT in such case.

Add several testcases and adjust libbpf.

Fixes: 3007098494 ("cgroup: add support for eBPF programs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12 21:52:19 -05:00
Mickaël Salaün
bc6a3d9977 bpf: Add test_tag to .gitignore
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:08 -05:00
Mickaël Salaün
702498a142 bpf: Remove bpf_sys.h from selftests
Add require dependency headers.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:08 -05:00
Mickaël Salaün
f4874d01be bpf: Use bpf_create_map() from the library
Replace bpf_map_create() with bpf_create_map() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:07 -05:00
Mickaël Salaün
5f155c2563 bpf: Use bpf_map_get_next_key() from the library
Replace bpf_map_next_key() with bpf_map_get_next_key() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:07 -05:00
Mickaël Salaün
e58383b803 bpf: Use bpf_map_delete_elem() from the library
Replace bpf_map_delete() with bpf_map_delete_elem() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:07 -05:00
Mickaël Salaün
e5ff7c4019 bpf: Use bpf_map_lookup_elem() from the library
Replace bpf_map_lookup() with bpf_map_lookup_elem() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:07 -05:00
Mickaël Salaün
10ecc728fe bpf: Use bpf_map_update_elem() from the library
Replace bpf_map_update() with bpf_map_update_elem() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:07 -05:00
Mickaël Salaün
2ee89fb9a9 bpf: Use bpf_load_program() from the library
Replace bpf_prog_load() with bpf_load_program() calls.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:06 -05:00
Mickaël Salaün
d02d8986a7 bpf: Always test unprivileged programs
If selftests are run as root, then execute the unprivileged checks as
well. This switch from 243 to 368 tests.

The test numbers are suffixed with "/u" when executed as unprivileged or
with "/p" when executed as privileged.

The geteuid() check is replaced with a capability check.

Handling capabilities requires the libcap dependency.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:06 -05:00
Mickaël Salaün
7f73f39a89 bpf: Change the include directory for selftest
Use the tools include directory instead of the installed one to allow
builds from other kernels.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:06 -05:00
Mickaël Salaün
9a7382662f tools: Sync {,tools/}include/uapi/linux/bpf.h
The tools version of this header is out of date; update it to the latest
version from kernel header.

Synchronize with the following commits:
* b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
* a5e8c07059 ("bpf: add bpf_probe_read_str helper")
* d1b662adcd ("bpf: allow option for setting bpf_l4_csum_replace from scratch")

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 15:56:05 -05:00
Arnaldo Carvalho de Melo
7ea6856d6f perf intel-pt: Use __fallthrough
To address new warnings emmited by gcc 7, e.g.::

    CC       /tmp/build/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.o
    CC       /tmp/build/perf/tests/parse-events.o
  util/intel-pt-decoder/intel-pt-pkt-decoder.c: In function 'intel_pt_pkt_desc':
  util/intel-pt-decoder/intel-pt-pkt-decoder.c:499:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
     if (!(packet->count))
        ^
  util/intel-pt-decoder/intel-pt-pkt-decoder.c:501:2: note: here
    case INTEL_PT_CYC:
    ^~~~
    CC       /tmp/build/perf/util/intel-pt-decoder/intel-pt-decoder.o
  cc1: all warnings being treated as errors

Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mf0hw789pu9x855us5l32c83@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-09 16:32:03 -03:00
Arnaldo Carvalho de Melo
2e2bbc039f perf tests: Avoid possible truncation with dirent->d_name + snprintf
Addressing a few cases spotted by a new warning in gcc 7:

  tests/parse-events.c: In function 'test_pmu_events':
  tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=]
     snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name);
                                       ^~
  In file included from /usr/include/stdio.h:939:0,
                   from /git/linux/tools/perf/util/map.h:9,
                   from /git/linux/tools/perf/util/symbol.h:7,
                   from /git/linux/tools/perf/util/evsel.h:10,
                   from tests/parse-events.c:3:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=]
     snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name);

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 945aea220b ("perf tests: Move test objects into 'tests' directory")
Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-09 14:48:46 -03:00
Arnaldo Carvalho de Melo
3aff8ba0a4 perf bench numa: Avoid possible truncation when using snprintf()
Addressing this warning from gcc 7:

    CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function '__bench_numa':
  bench/numa.c:1582:42: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 8 and 17 [-Werror=format-truncation=]
       snprintf(tname, 32, "process%d:thread%d", p, t);
                                            ^~
  bench/numa.c:1582:25: note: directive argument in the range [0, 2147483647]
       snprintf(tname, 32, "process%d:thread%d", p, t);
                           ^~~~~~~~~~~~~~~~~~~~
  In file included from /usr/include/stdio.h:939:0,
                   from bench/../util/util.h:47,
                   from bench/../builtin.h:4,
                   from bench/numa.c:11:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 17 and 35 bytes into a destination of size 32
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-twa37vsfqcie5gwpqwnjuuz9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-09 14:39:42 -03:00
Bob Moore
7735ca0eb4 ACPICA: Source tree: Update copyright notices to 2017
ACPICA commit 16577e5265923f4999b4d2c0addb2343b18135e1

Affects all files.

Link: https://github.com/acpica/acpica/commit/16577e52
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09 14:47:02 +01:00
Arnaldo Carvalho de Melo
8434a2ec13 perf header: Fix handling of PERF_EVENT_UPDATE__SCALE
In commit daeecbc0c4 ("perf tools: Add event_update event scale type"), the
handling of PERF_EVENT_UPDATE__SCALE cast struct event_update_event->data to a
pointer to event_update_event_scale, uses some field from this casted struct
and then ends up falling through to the handling of another event type,
PERF_EVENT_UPDATE__CPUS were it casts that ev->data to yet another type, oops,
fix it by inserting the missing break.

Noticed when building perf using gcc 7 on Fedora Rawhide:

  util/header.c: In function 'perf_event__process_event_update':
  util/header.c:3207:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
     evsel->scale = ev_scale->scale;
     ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
  util/header.c:3208:2: note: here
    case PERF_EVENT_UPDATE__CPUS:
    ^~~~

This wasn't noticed because probably PERF_EVENT_UPDATE__CPUS comes after
PERF_EVENT_UPDATE__SCALE, so we would just create a bogus evsel->own_cpus when
processing a PERF_EVENT_UPDATE__SCALE to then leak it and create a new cpu map
with the correct data.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: daeecbc0c4 ("perf tools: Add event_update event scale type")
Link: http://lkml.kernel.org/n/tip-lukcf9hdj092ax2914ss95at@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 22:06:18 -03:00
Arnaldo Carvalho de Melo
bdf23a9a19 perf thread_map: Correctly size buffer used with dirent->dt_name
The size of dirent->dt_name is NAME_MAX + 1, but the size for the 'path'
buffer is hard coded at 256, which may truncate it because we also
prepend "/proc/", so that all that into account and thank gcc 7 for this
warning:

  /git/linux/tools/perf/util/thread_map.c: In function 'thread_map__new_by_uid':
  /git/linux/tools/perf/util/thread_map.c:119:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 250 [-Werror=format-truncation=]
     snprintf(path, sizeof(path), "/proc/%s", dirent->d_name);
                                         ^~
  In file included from /usr/include/stdio.h:939:0,
                   from /git/linux/tools/perf/util/thread_map.c:5:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 262 bytes into a destination of size 256
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-csy0r8zrvz5efccgd4k12c82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 17:31:28 -03:00
Arnaldo Carvalho de Melo
7b0214b702 perf top: Use __fallthrough
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

    CC       /tmp/build/perf/builtin-top.o
  builtin-top.c: In function 'display_thread':
  builtin-top.c:644:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (errno == EINTR)
         ^
  builtin-top.c:647:3: note: here
     default:
   ^~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lmcfnnyx9ic0m6j0aud98p4e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 17:31:22 -03:00
Arnaldo Carvalho de Melo
d64b721d27 tools strfilter: Use __fallthrough
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

  util/strfilter.c: In function 'strfilter_node__sprint':
  util/strfilter.c:270:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
     if (len < 0)
        ^
  util/strfilter.c:272:2: note: here
    case '!':
    ^~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z2dpywg7u8fim000hjfbpyfm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 17:31:10 -03:00
Arnaldo Carvalho de Melo
94bdd5edb3 tools string: Use __fallthrough in perf_atoll()
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

    CC       /tmp/build/perf/util/string.o
  util/string.c: In function 'perf_atoll':
  util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (*p)
         ^
  util/string.c:24:3: note: here
     case '\0':
     ^~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ophb30v9apkk6o95el0rqlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 17:31:01 -03:00
Arnaldo Carvalho de Melo
b5bf1733d6 tools include: Add a __fallthrough statement
For cases where implicit fall through case labels are intended,
to let us inform that to gcc >= 7:

    CC       /tmp/build/perf/util/string.o
  util/string.c: In function 'perf_atoll':
  util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (*p)
         ^
  util/string.c:24:3: note: here
     case '\0':
     ^~~~

So we introduce:

  #define __fallthrough __attribute__ ((fallthrough))

And use it in such cases.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/n/tip-qnpig0xfop4hwv6k4mv1wts5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 17:30:58 -03:00
Mickaël Salaün
7a5980f9c0 tools lib bpf: Add missing header to the library
Include stddef.h to define size_t.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joe Stringer <joe@ovn.org>
Link: http://lkml.kernel.org/r/20170207205609.8035-2-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:39:16 -03:00
Andi Kleen
7666702417 perf vendor events intel: Add uncore events for Broadwell DE
This is not a full uncore event list, but a short list of useful
and understandable metrics.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:38:25 -03:00
Andi Kleen
22c8e5526b perf vendor events intel: Add uncore events for Xeon Phi (Knights Landing)
Add metrics for memory and MCDRAM. Minimal metrics only for now.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:38:03 -03:00
Andi Kleen
dd32cb5d8f perf vendor events intel: Add uncore events for Sandy Bridge Server
This is not a full uncore event list, but a short list of useful
and understandable metrics.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:37:35 -03:00
Andi Kleen
6b138c7b14 perf vendor events intel: Add uncore events for IvyBridge Server
This is not a full uncore event list, but a short list of useful
and understandable metrics.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:37:10 -03:00
Andi Kleen
949c84efca perf vendor events intel: Add uncore events for Broadwell Server
This is not a full uncore event list, but a short list of useful
and understandable metrics.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:36:32 -03:00
Andi Kleen
7003f00fdb perf vendor events intel: Add uncore events for Haswell Server processor
This is not a full uncore event list, but a short list of useful and
understandable metrics.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:36:12 -03:00
Arnaldo Carvalho de Melo
2f7db55579 perf tools: Fix include of linux/mman.h
It was using uapi/linux/mmap.h which caused for at least one reporter,
that hasn't specified in what environment the problem manifests itself:

 ----
The original error is:

In file included from util/event.c:2:0:
...tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h:
No such file or directory
 #include <uapi/asm/mman.h>
                           ^
compilation terminated.
 ----

Test built it on these containers:

  # dm
   1 alpine:3.4: Ok
   2 android-ndk:r12b-arm: Ok
   3 archlinux:latest: Ok
   4 centos:5: Ok
   5 centos:6: Ok
   6 centos:7: Ok
   7 debian:7: Ok
   8 debian:8: Ok
   9 debian:experimental: Ok
  10 debian:experimental-x-arm64: Ok
  11 debian:experimental-x-mips: Ok
  12 debian:experimental-x-mips64: Ok
  13 debian:experimental-x-mipsel: Ok
  14 fedora:20: Ok
  15 fedora:21: Ok
  16 fedora:22: Ok
  17 fedora:23: Ok
  18 fedora:24: Ok
  19 fedora:24-x-ARC-uClibc: Ok
  20 fedora:25: Ok
  21 fedora:rawhide: Ok
  22 mageia:5: Ok
  23 opensuse:13.2: Ok
  24 opensuse:42.1: Ok
  25 opensuse:tumbleweed: Ok
  26 ubuntu:12.04.5: Ok
  27 ubuntu:14.04.4-x-linaro-arm64: Ok
  28 ubuntu:15.10: Ok
  29 ubuntu:16.04: Ok
  30 ubuntu:16.04-x-arm: Ok
  31 ubuntu:16.04-x-arm64: Ok
  32 ubuntu:16.04-x-powerpc: Ok
  33 ubuntu:16.04-x-powerpc64: Ok
  34 ubuntu:16.04-x-powerpc64el: Ok
  35 ubuntu:16.04-x-s390: Ok
  36 ubuntu:16.10: Ok

Reported-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: fbef103fad ("perf tools: Do hugetlb handling in more systems")
Link: http://lkml.kernel.org/n/tip-4wm5xmjz5wgbq7ucyz4dyd72@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 16:06:21 -03:00
Dave Hansen
2195bff041 selftests, x86, protection_keys: fix wrong offset in siginfo
The siginfo contains a bunch of information about the fault.
For protection keys, it tells us which protection key's
permissions were violated.

The wrong offset in here leads to reading garbage and thus
failures in the tests.

We should probably eventually move this over to using the
kernel's headers defining the siginfo instead of a hard-coded
offset.  But, for now, just do the simplest fix.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-08 11:15:43 -07:00
Dave Hansen
16846c2d96 selftests, x86, protection_keys: fix uninitialized variable warning
'orig_pkru' might have been uninitialized here.  Fix it.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-08 11:15:35 -07:00
David Carrillo-Cisneros
6467753d61 tools lib traceevent: Robustify do_generate_dynamic_list_file
The dynamic-list-file used to export dynamic symbols introduced in

commit e3d09ec812 ("tools lib traceevent: Export dynamic symbols
used by traceevent plugins")

is generated without any sort of error checking.

I experienced problems due to an old version of nm (v 0.158) that outputs
in a format distinct from the assumed by the script.

Robustify the built of dynamic symbol list  by enforcing that the second
column of $(NM) -u <files> is either "U" (Undefined), "W" or "w" (undefined
weak), which are the possible outputs from non-ancient $(NM) versions.
Print an error if format is unexpected.

v2: Accept "W" and "w" symbol options.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170208052840.112182-1-davidcc@google.com
[ Use STRING1 = STRING1 instead of == to make this work on Ubuntu systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 10:27:45 -03:00
Taeung Song
360e071b18 perf tools: Use zfree() to avoid keeping dangling pointers
The cases changed in this patch are for when we free but keep the
pointer to the freed area, which is not always a good idea.

Be more defensive and zero the pointer to avoid possible use after
free bugs to take more time to be detected.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-5-git-send-email-treeze.taeung@gmail.com
[ rewrote commit log ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:41:12 -03:00
Taeung Song
506fde11a3 perf tools: Use zfree() instead of ad hoc equivalent
We have zfree(&ptr) for this very common pattern:

   free(ptr);
   ptr = NULL;

So use it in a few more places.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-4-git-send-email-treeze.taeung@gmail.com
[ rewrote commit log ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:41:11 -03:00
Taeung Song
5aa365f298 perf tools: Add missing check for failure in a zalloc() call
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:41:11 -03:00
Taeung Song
75fc5ae5cc perf tools: Only increase index if perf_evsel__new_idx() succeeds
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:41:10 -03:00
Uwe Kleine-König
d5c3a937e0 perf probe: Add option --symfs
perf probe makes use of debug symbols, so add --symfs as the other
commands have.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/1469094512-13440-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:41:10 -03:00
Victor Kamensky
9b20065351 perf symbols: Take into account symfs setting when reading file build ID
After commit 5baecbcd9c ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option.  One can see message like this:

  bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols

It happens because code added by 5baecbcd9c opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.

Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.

Also note in latter tree after 5baecbcd9c commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.

Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd9c ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:28:55 -03:00
Ravi Bangoria
27cf5706a0 perf sdt: Show proper hint when event not yet in place via 'perf probe'
All events from 'perf list', except SDT events, can be directly recorded
with 'perf record'. But, the flow is little different for SDT events.

Probe points for SDT event needs to be created using 'perf probe' before
recording it using 'perf record'.

Perf shows misleading hint when a user tries to record SDT event without
first creating a probe point. Show proper hint there.

Before patch:

  $ perf record -a -e sdt_glib:idle__add
    event syntax error: 'sdt_glib:idle__add'
                         \___ unknown tracepoint

    Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
    Hint:  Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
    ...

After patch:

  $ perf record -a -e sdt_glib:idle__add
    event syntax error: 'sdt_glib:idle__add'
                         \___ unknown tracepoint

    Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
    Hint:  SDT event cannot be directly recorded on.
           Please first use 'perf probe sdt_glib:idle__add' before recording it.
    ...

  $ perf probe sdt_glib:idle__add
    Added new event:
      sdt_glib:idle__add   (on %idle__add in /usr/lib64/libglib-2.0.so.0.5000.2)

    You can now use it in all perf tools, such as:

        perf record -e sdt_glib:idle__add -aR sleep 1

  $ perf record -a -e sdt_glib:idle__add
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.175 MB perf.data ]

Suggested-and-Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170203102642.17258-1-ravi.bangoria@linux.vnet.ibm.com
[ s/Please use/Please first use/ and break the Hint line in two ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 09:28:54 -03:00
Andi Kleen
f23610245c perf list: Add debug support for outputing alias string
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure.  For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.

Before:

% perf list
...
cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]

After

% perf list --debug
...
cache:
  l1d.replacement
       [L1D data line replacements]
        cpu/umask=0x1,period=2000003,event=0x51/
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]
        cpu/umask=0x2,period=2000003,cmask=1,event=0x48/

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 08:55:04 -03:00
Andi Kleen
231bb2aa32 perf pmu: Support event aliases for non cpu// pmus
The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.

This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias.  This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 08:55:04 -03:00
Andi Kleen
15b22ed369 perf pmu: Support per pmu json aliases
Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU.  Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).

To avoid printing the events multiple times in perf list filter out
duplicated events during printing.

v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 08:55:03 -03:00
Andi Kleen
fedb2b5182 perf jevents: Add support for parsing uncore json files
Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.

Handle the "ExtSel" field, which just extends the event mask with an
additional bit.

Handle the "Filter" field which adds parameters to the main event
to configure filtering.

Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)

Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)

Then output the fields into the pmu-events data structures which are
compiled into perf.

Filter out zero fields, except for the event itself.

v2: Fix compilation. Add uncore_ prefix at pre-processing time.
    Move eventcode change to separate patch.

v3: Remove extra __maybe_unused

v4: dont duplicate aliases for cpu pmu events

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 08:55:03 -03:00
Andi Kleen
d581141970 perf jevents: Parse eventcode as number
The next patch needs to modify event code. Previously eventcode was just
passed through as a string. Now parse it as a number.

v2: Don't special case 0

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08 08:55:02 -03:00