Commit Graph

221604 Commits

Author SHA1 Message Date
Deng-Cheng Zhu
7f788d2d53 MIPS: add support for software performance events
Software events are required as part of the measurable stuff by the
Linux performance counter subsystem. Here is the list of events added by
this patch:
PERF_COUNT_SW_PAGE_FAULTS
PERF_COUNT_SW_PAGE_FAULTS_MIN
PERF_COUNT_SW_PAGE_FAULTS_MAJ
PERF_COUNT_SW_ALIGNMENT_FAULTS
PERF_COUNT_SW_EMULATION_FAULTS

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Acked-by: David Daney <ddaney@caviumnetworks.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Patchwork: https://patchwork.linux-mips.org/patch/1686/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:48 +01:00
Deng-Cheng Zhu
6dbd972850 MIPS: define local_xchg from xchg_local to atomic_long_xchg
Perf-events is now using local_t helper functions internally. There is a
use of local_xchg(). On MIPS, this is defined to xchg_local() which is
missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h
to atomic_long_xchg(). Then Perf-events can pass the build.

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1687/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:47 +01:00
Florian Fainelli
238dd317f7 MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0

This SoC can be found on commercial products like the Linksys WRTP54G

Original patch by Xin with improvments by Florian.

Signed-off-by: Xin Zhen <xlonestar2000@aim.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1563/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2010-10-29 19:08:46 +01:00
Florian Fainelli
3bc6968adc MIPS: AR7: Initialize GPIO earlier
In order to detect the Titan variant, we must initialize GPIOs earlier since
detection relies on some GPIO values to be set.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1562/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2010-10-29 19:08:46 +01:00
David Daney
340fbb8b12 MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
Declare that OCTEON reference boards have both OHCI and EHCI.

Add platform devices for the corresponding hardware.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1676/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:45 +01:00
David Daney
1643accdaa USB: Add EHCI and OHCH glue for OCTEON II SOCs.
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus.  This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.

The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.

The ehci and ohci blocks share a common clocking and PHY
infrastructure.  Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.

Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:44 +01:00
David Daney
4169b86324 MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
The EHCI and OHCI blocks connection to the I/O bus is controlled by
these registers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1674/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/octeon/cvmx-uctlx-defs.h
2010-10-29 19:08:43 +01:00
David Daney
c9941158fd MIPS: Octeon: Apply CN63XXP1 errata workarounds.
The CN63XXP1 needs a couple of workarounds to ensure memory is not written
in unexpected ways.

All PREF with hints in the range 0-4,6-24 are replaced with PREF 28.  We
pass a flag to the assembler to cover compiler generated code, and patch
uasm for the dynamically generated code.

The write buffer threshold is reduced to 4.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1672/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:43 +01:00
David Daney
468ffde46d WATCHDOG: octeon-wdt: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments.  Since
the watchdog counters are clocked by the I/O clock, use its rate for
timing calculations.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1659/
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:42 +01:00
David Daney
1fa25ab2ca ATA: pata_octeon_cf: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments.  Since the
CF bus timing logic is clocked by the I/O clock, use its rate for delay
calculations.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1660/
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:41 +01:00
David Daney
4b8bca7028 MIPS: Octeon: Use I/O clock rate for calculations.
The I2C and UARTS are clocked by the I/O clock, use its rate for these
devices.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1670/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:41 +01:00
David Daney
e195aa3039 MIPS: Octeon: Add octeon_get_io_clock_rate() for cn63xx
Starting with cn63xx Octeon I/O blocks are clocked at a different rate
than the CPU.  Add a new function octeon_get_io_clock_rate() that
yields the I/O clock rate.

Also rearrange octeon_get_clock_rate() to get the value from the saved
sysinfo structure.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:40 +01:00
David Daney
3b29dadff9 MIPS: Octeon: Remove bogus code from octeon_get_clock_rate()
We can run with any simulator clock rate.  Get rid of the code
overriding it to 6MHz.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:39 +01:00
David Daney
54954a6d6b MIPS: Octeon: Scale Octeon2 clocks in octeon_init_cvmcount()
The per-CPU clocks are synchronized from IPD_CLK_COUNT, on cn63XX it must
be scaled by the clock frequency ratio.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1667/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:38 +01:00
David Daney
f92a6b0875 MIPS: Octeon: Enable Read Inhibit / eXecute Inhibit on Octeon II.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1666/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:38 +01:00
David Daney
0e56b3852b MIPS: Octeon: Probe for Octeon II CPUs.
The OCTEON II ISA extends the original OCTEON ISA, so give it its own
__elf_platform string so optimized libraries can be selected in
userspace.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1665/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:37 +01:00
David Daney
f8bf7e688c MIPS: Octeon: Handle Octeon II caches.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1664/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:36 +01:00
David Daney
1584d7f2d5 MIPS: Add identifiers for Octeon II CPUs.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1662/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:35 +01:00
David Daney
b8db85b5b5 MIPS: Octeon: Update L2 Cache code for CN63XX
The CN63XX has a different L2 cache architecture.  Update the helper
functions to reflect this.

Some joining of split lines was also done to improve readability, as
well as reformatting of comments.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1663/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:35 +01:00
David Daney
a70b13a9f0 MIPS: Octeon: Add cn63XX to Octeon chip detection macros.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1661/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:34 +01:00
David Daney
aa32a955ae MIPS: Octeon: Update register definitions for CN63XX chips
The CN63XX is a new 6-CPU SOC based on the new OCTEON II CPU cores.

Join some lines back together.  This makes some of them exceed 80
columns, but they are uninteresting and this unclutters things.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1668/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:33 +01:00
David Daney
b93b2abce4 MIPS: Octeon: Rewrite DMA mapping functions.
All Octeon chips can support more than 4GB of RAM.  Also due to how Octeon
PCI is setup, even some configurations with less than 4GB of RAM will have
portions that are not accessible from 32-bit devices.

Enable the swiotlb code to handle the cases where a device cannot directly
do DMA.  This is a complete rewrite of the Octeon DMA mapping code.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1639/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:32 +01:00
David Daney
ee71b7d2f8 MIPS: Add a platform hook for swiotlb setup.
This allows platforms that are using the swiotlb to initialize it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1638/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:32 +01:00
David Daney
48e1fd5a81 MIPS: Convert DMA to use dma-mapping-common.h
Use asm-generic/dma-mapping-common.h to handle all DMA mapping operations
and establish a default get_dma_ops() that forwards all operations to the
existing code.

Augment dev_archdata to carry a pointer to the struct dma_map_ops, allowing
DMA operations to be overridden on a per device basis.  Currently this is
never filled in, so the default dma_map_ops are used.  A follow-on patch
sets this for Octeon PCI devices.

Also initialize the dma_debug system as it is now used if it is configured.

Includes fixes by Kevin Cernekee <cernekee@gmail.com>.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1637/
Patchwork: http://patchwork.linux-mips.org/patch/1678/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:31 +01:00
David Daney
43e4f7ae4b MIPS: ip32, ip27, jazz: Make static functions in dma-coherence.h inline.
Any function defined in a header file should be inline.  This helps us
avoid 'unused' compiler warnings when we include the files in more
places in subsequent patches.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1636/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:30 +01:00
David Daney
f00e001e9c MIPS: Octeon: Select ZONE_DMA32
Give us a nice place to allocate coherent DMA memory for 32-bit devices.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1635/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:30 +01:00
David Daney
57575b5c81 MIPS: Octeon: Adjust top of DMA32 zone.
On OCTEON, we reserve the last 256MB of 32-bit PCI address space, mapping
the RAM in this region at a high DMA address.  This makes memory in this
region unavailable for 32-bit DMA.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1634/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:29 +01:00
David Daney
cfd570990f MIPS: Allow MAX_DMA32_PFN to be overridden.
DMA mapping may reduce the usable physical address range usable for
32-bit DMA.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1633/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:28 +01:00
David Daney
f12990720c MIPS: Octeon: Set dma_masks for octeon_mgmt device.
This allows follow-on patches to dma mapping functions to work with
the octeon mgmt device..

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1632/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:27 +01:00
From: jiang.adam@gmail.com
334c86c494 MIPS: IRQ: Add stackoverflow detection
Add stackoverflow detection to mips arch

Signed-off-by: Adam Jiang <jiang.adam@gmail.com>
Cc: dmitri.vorobiev@movial.com
Cc: wuzhangjin@gmail.com
Cc: ddaney@caviumnetworks.com
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
Cc: tj@kernel.org
Cc: tglx@linutronix.de
Cc: mingo@elte.hu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1559/
Patchwork: https://patchwork.linux-mips.org/patch/1651/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:27 +01:00
Thomas Gleixner
b78807158b MIPS: Kconfig cleanup
arch/mips/Kconfig already sets GENERIC_HARDIRQS_NO__DO_IRQ unconditionally.
Remove the redundant select from the Loongson Kconfig.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:26 +01:00
Ralf Baechle
48a26e60c6 MIPS: Remove wait argument of r4k_on_each_cpu
All callers were passing in 1 anyway.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:25 +01:00
Ralf Baechle
c8c5f3fd9f MIPS: More detailed description of r4k_on_each_cpu
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:25 +01:00
Ralf Baechle
7837314d14 MIPS: Get rid of branches to .subsections.
It was a nice optimization - on paper at least.  In practice it results in
branches that may exceed the maximum legal range for a branch.  We can
fight that problem with -ffunction-sections but -ffunction-sections again
is incompatible with -pg used by the function tracer.

By rewriting the loop around all simple LL/SC blocks to C we reduce the
amount of inline assembler and at the same time allow GCC to often fill
the branch delay slots with something sensible or whatever else clever
optimization it may have up in its sleeve.

With this optimization gone we also no longer need -ffunction-sections,
so drop it.

This optimization was originally introduced in 2.6.21, commit
5999eca25c1fd4b9b9aca7833b04d10fe4bc877d (linux-mips.org) rsp.
f65e4fa8e0 (kernel.org).

Original fix for the issues which caused me to pull this optimization by
Paul Gortmaker <paul.gortmaker@windriver.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:24 +01:00
Linus Torvalds
b4020c1b19 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: Cleanup and thus reduce smb session structure and fields used during authentication
  NTLM auth and sign - Use appropriate server challenge
  cifs: add kfree() on error path
  NTLM auth and sign - minor error corrections and cleanup
  NTLM auth and sign - Use kernel crypto apis to calculate hashes and smb signatures
  NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange
  cifs: cifs_convert_address() returns zero on error
  NTLM auth and sign - Allocate session key/client response dynamically
  cifs: update comments - [s/GlobalSMBSesLock/cifs_file_list_lock/g]
  cifs: eliminate cifsInodeInfo->write_behind_rc (try #6)
  [CIFS] Fix checkpatch warnings and bump cifs version number
  cifs: wait for writeback to complete in cifs_flush
  cifs: convert cifsFileInfo->count to non-atomic counter
2010-10-29 10:37:27 -07:00
Linus Torvalds
435f49a518 readv/writev: do the same MAX_RW_COUNT truncation that read/write does
We used to protect against overflow, but rather than return an error, do
what read/write does, namely to limit the total size to MAX_RW_COUNT.
This is not only more consistent, but it also means that any broken
low-level read/write routine that still keeps counts in 'int' can't
break.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-29 10:36:49 -07:00
Kyle McMartin
6a915c2bf0 parisc-agp: fix missing slab.h include
Commit 338e4fab added a missing kfree if the alloc_pci_dev failed
but forgot to include <linux/slab.h> for the definition of
kfree.

Signed-off-by: Kyle McMartin <kyle@redhat.com>
2010-10-29 13:26:48 -04:00
H. Peter Anvin
2d1d7126bb x86, ftrace: Use safe noops, drop trap test
Always use a safe 5-byte noop sequence.  Drop the trap test, since it
is known to return false negatives on some virtualization platforms on
32 bits.  The resulting code is both simpler and safer.

Cc: Daniel Drake <dsd@laptop.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29 13:07:59 -04:00
Anil Ravindranath
592488a32b [SCSI] pmcraid: add support for set timestamp command and other fixes
The following are the fixes in this patch:

1. Added support of set timestamp command in the driver
2. Pass all status code to mgmt application. Earlier we were passing
   only failed ones.
3. Call class_destroy after unregister_chrdev and pci_unregister_driver

Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-29 12:03:01 -05:00
David Miller
f0daed0242 jump_label: Fix unaligned traps on sparc.
The vmlinux.lds.h knobs to emit the __jump_table section in the main
kernel image takes care to align the section, but this doesn't help
for the __jump_table section that gets emitted into modules.

Fix the resulting lack of section alignment by explicitly specifying
it in the assembler.

Signed-off-by: David S. Miller <davem@davemloft.net>
LKML-Reference: <20101023.110624.226758370.davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29 12:57:06 -04:00
Steven Rostedt
95bcd683fb jump label: Make arch_jump_label_text_poke_early() optional
Some archs do not need to do anything special for jump labels on
startup (like MIPS).  This patch adds a weak function stub for
arch_jump_label_text_poke_early();

Cc: Jason Baron <jbaron@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1286218615-24011-2-git-send-email-ddaney@caviumnetworks.com>
LKML-Reference: <20101015201037.703989993@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29 12:56:13 -04:00
Steven Rostedt
de31c3ca81 jump label: Fix error with preempt disable holding mutex
Kprobes and jump label were having a race between mutexes that
was fixed by reordering the jump label. But this reordering
moved the jump label mutex into a preempt disable location.

This patch does a little fiddling to move the grabbing of
the jump label mutex from inside the preempt disable section
and still keep the order correct between the mutex and the
kprobes lock.

Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29 12:55:55 -04:00
Linus Torvalds
f56f44001c Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix kprobes single stepping
  [S390] tape: fix dbf usage
  [S390] dasd: provide a Sense Path Group ID ioctl
  [S390] ftrace: select HAVE_C_RECORDMCOUNT
  [S390] vdso: get rid of redefinition warnings
  [S390] facility detection: remove unused variable
  [S390] hypfs: Fix error handling in hypfs_diag initialization
  [S390] topology: fix cpu masks for topology=off case
  [S390] topology: add SCHED_MC config option
  [S390] Kconfig: add machine type number to code generation options
  [S390] Add z196 machine type to setup_hwcaps
2010-10-29 08:49:18 -07:00
Linus Torvalds
162164f7e9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: fix function prototype
  Squashfs: fix use of __le64 annotated variable
2010-10-29 08:48:58 -07:00
Linus Torvalds
d8d048f69a Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: tidy up device searches in read_balance.
  md/raid1: fix some typos in comments.
  md/raid1: discard unused variable.
  md: unplug writes to external bitmaps.
  md: use separate bio pool for each md device.
  md: change type of first arg to sync_page_io.
  md/raid1: perform mem allocation before disabling writes during resync.
  md: use bio_kmalloc rather than bio_alloc when failure is acceptable.
  md: Fix possible deadlock with multiple mempool allocations.
  md: fix and update workqueue usage
  md: use sector_t in bitmap_get_counter
  md: remove md_mutex locking.
  md: Fix regression with raid1 arrays without persistent metadata.
2010-10-29 08:47:36 -07:00
Tyler Hicks
8747f95481 eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
When printing mount options, print the new ecryptfs_mount_auth_tok_only
mount option.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-10-29 10:31:36 -05:00
Roberto Sassu
f16feb5119 ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
This patch adds a new mount parameter 'ecryptfs_mount_auth_tok_only' to
force ecryptfs to use only authentication tokens which signature has
been specified at mount time with parameters 'ecryptfs_sig' and
'ecryptfs_fnek_sig'. In this way, after disabling the passthrough and
the encrypted view modes, it's possible to make available to users only
files encrypted with the specified authentication token.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Clean up coding style errors found by checkpatch]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-10-29 10:31:36 -05:00
Roberto Sassu
39fac853a7 ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
This patch replaces the check of the 'matching_auth_tok' pointer with
the exit status of ecryptfs_find_auth_tok_for_sig().
This avoids to use authentication tokens obtained through the function
ecryptfs_keyring_auth_tok_for_sig which are not valid.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-10-29 10:31:36 -05:00
Roberto Sassu
aee683b9e7 ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
This patch allows keys requested in the function
ecryptfs_keyring_auth_tok_for_sig()to be released when they are no
longer required. In particular keys are directly released in the same
function if the obtained authentication token is not valid.

Further, a new function parameter 'auth_tok_key' has been added to
ecryptfs_find_auth_tok_for_sig() in order to provide callers the key
pointer to be passed to key_put().

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Initialize auth_tok_key to NULL in ecryptfs_parse_packet_set]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-10-29 10:31:35 -05:00
Tyler Hicks
2e21b3f124 eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
eCryptfs was passing the LOOKUP_OPEN flag through to the lower file
system, even though ecryptfs_create() doesn't support the flag. A valid
filp for the lower filesystem could be returned in the nameidata if the
lower file system's create() function supported LOOKUP_OPEN, possibly
resulting in unencrypted writes to the lower file.

However, this is only a potential problem in filesystems (FUSE, NFS,
CIFS, CEPH, 9p) that eCryptfs isn't known to support today.

https://bugs.launchpad.net/ecryptfs/+bug/641703

Reported-by: Kevin Buhr
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-10-29 10:31:35 -05:00