Commit Graph

659 Commits

Author SHA1 Message Date
Catalin Marinas
a5e9d38b22 ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
This macro is not defined when !CONFIG_MMU so this patch moves the
CONSISTENT_* definitions to the CONFIG_MMU section.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-01 10:12:07 +01:00
Khem Raj
9a40ac8615 ARM: 6164/1: Add kto and kfrom to input operands list.
When functions incoming parameters are not in input operands list gcc
4.5 does not load the parameters into registers before calling this
function but the inline assembly assumes valid addresses inside this
function. This breaks the code because r0 and r1 are invalid when
execution enters v4wb_copy_user_page ()

Also the constant needs to be used as third input operand so account
for that as well.

Tested on qemu arm.

CC: <stable@kernel.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08 19:42:18 +01:00
Anfei
5e27fb78df ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6
Instruction faults on pre-ARMv6 CPUs are interpreted as
a 'translation fault', but do_translation_fault doesn't
handle well if user mode trying to run instruction above
TASK_SIZE, and result in the infinite retry of that
instruction.

CC: <stable@kernel.org>
Signed-off-by: Anfei Zhou <anfei.zhou@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08 19:39:57 +01:00
Nicolas Pitre
17ebba1fe4 ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging
When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page
by kmap_atomic() is always cleared by kunmap_atomic().  This helps find
bad usages such as dereferences after the unmap, or overflow into the
adjacent fixmap areas.

But this debugging aid is completely bypassed when a kmap for the same
page already exists as the kmap is reused instead.  ON VIVT systems we
have no choice but to reuse that kmap due to cache coherency issues,
but on non VIVT systems we should always force the fixmap usage when
debugging is active.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-08 19:25:50 +01:00
Linus Walleij
ea208f646c ARM: 6144/1: TCM memory bug freeing bug
This fixes a bug in mm/init.c when freeing the TCM compile memory,
this was being referred to as a char * which is incorrect: this
will dereference the pointer and feed in the value at the location
instead of the address to it. Change it to a plain char and use
&(char) to reference it.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-27 10:36:07 +01:00
Santosh Shilimkar
a901ff715d ARM: 6139/1: ARMv7: Use the Inner Shareable I-cache on MP
This patch fixes the flush_cache_all for ARMv7 SMP.It was
missing from commit b8349b569a

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-20 23:52:38 +01:00
Linus Torvalds
349e1fba7e Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits)
  Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
  Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
  Input: s3c24xx_ts - Implement generic GPIO configuration callback
  ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
  ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
  ARM: S3C64XX: Add touchscreen platform device definition
  ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
  ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: gpio.h cleanup
  ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Use common functions for gpiolib implementation
  drivers: serial: S5PC100 serial driver cleanup
  ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
  ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
  ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
  ARM: S5PV210: Add GPIOlib support
  ARM: SAMSUNGy: fix broken timer irq base
  ARM: SMDK6440: Add audio devices on board
  ARM: S5P6440: Add audio platform devices
  ...
2010-05-19 11:49:33 -07:00
Linus Torvalds
1d3c6ff44a Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)
  ARM: remove 'select GENERIC_TIME'
  ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO
  ARM: 6074/1: oprofile: convert from sysdev to platform device
  ARM: 6073/1: oprofile: remove old files and update KConfig
  ARM: 6072/1: oprofile: use perf-events framework as backend
  ARM: 6071/1: perf-events: allow modules to query the number of hardware counters
  ARM: 6070/1: perf-events: add support for xscale PMUs
  ARM: 6069/1: perf-events: use numeric ID to identify PMU
  ARM: 6064/1: pmu: register IRQs at runtime
  ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
  ARM: 6134/1: Handle instruction cache maintenance fault properly
  ARM: nwfpe: allow debugging output to be configured at runtime
  ARM: rename mach_cpu_disable() to platform_cpu_disable()
  ARM: 6132/1: PL330: Add common core driver
  ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
  ARM: Move memory mapping into mmu.c
  ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
  ARM: Remove useless linux/bootmem.h includes
  ARM: convert /proc/cpu/aligment to seq_file
  arm: use asm-generic/scatterlist.h
  ...
2010-05-19 11:37:22 -07:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
c39e52a793 Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel
Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig
2010-05-17 11:53:39 +01:00
Russell King
47ab0dee66 ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
Provide a configuration option to allow the ARMv6 to use normal
bufferable memory for coherent DMA.  This option is forced to 'y'
for ARMv7, and offered as a configuration option on ARMv6.

Enabling this option requires drivers to have the necessary barriers
to ensure that data in DMA coherent memory is visible prior to the
DMA operation commencing.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17 11:52:11 +01:00
Kirill A. Shutemov
8c0b742ca7 ARM: 6134/1: Handle instruction cache maintenance fault properly
Between "clean D line..." and "invalidate I line" operations in
v7_coherent_user_range(), the memory page may get swapped out.
And the fault on "invalidate I line" could not be properly handled
causing the oops.

In ARMv6 "external abort on linefetch" replaced by "instruction cache
maintenance fault". Let's handle it as translation fault. It fixes the
issue.

I'm not sure if it's reasonable to check arch version in run-time.
Let's do it in compile time for now.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:52 +01:00
Jason McMullan
64039be822 ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
The L310 cache controller's interface is almost identical
to the L210. One major difference is that the PL310 can
have up to 16 ways.

This change uses the cache's part ID and the Associativity
bits in the AUX_CTRL register to determine the number of ways.

Also, this version prints out the CACHE_ID and AUX_CTRL registers.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:50 +01:00
Russell King
a2227120ee ARM: Move memory mapping into mmu.c
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:49 +01:00
Russell King
ceb683d3bc ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:49 +01:00
Alexey Dobriyan
b7072c63c1 ARM: convert /proc/cpu/aligment to seq_file
Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which makes addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e1612 "Fix rmmod/read/write races in
/proc entries"

This patch is part of an effort to remove the old simple procfs PAGE_SIZE
buffer interface.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:48 +01:00
Russell King
74b8721099 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2010-05-13 09:56:24 +01:00
Vasily Khoruzhick
0741b7d269 ARM: RX1950: Add suspend/resume support for RX1950
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-12 09:19:54 +09:00
Haojian Zhuang
66b1964750 [ARM] mmp: enable L2 in mmp2
Enable Tauros2 L2 in mmp2. Tauros2 L2 is shared in Marvell ARM cores.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Catalin Marinas
b8349b569a ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP
The standard I-cache Invalidate All (ICIALLU) and Branch Predication
Invalidate All (BPIALL) operations are not automatically broadcast to
the other CPUs in an ARMv7 MP system. The patch adds the Inner Shareable
variants, ICIALLUIS and BPIALLIS, if ARMv7 and SMP.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08 10:44:30 +01:00
Catalin Marinas
f4d6477f7f ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops
The Snoop Control Unit on the ARM11MPCore hardware does not detect the
cache operations and the dma_cache_maint*() functions may leave stale
cache entries on other CPUs. The solution implemented in this patch
performs a Read or Write For Ownership in the ARMv6 DMA cache
maintenance functions. These LDR/STR instructions change the cache line
state to shared or exclusive so that the cache maintenance operation has
the desired effect.

Tested-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08 10:44:30 +01:00
Catalin Marinas
b5a07faade ARM: 6106/1: Implement copy_to_user_page() for noMMU
Commit 7959722 introduced calls to copy_(to|from)_user_page() from
access_process_vm() in mm/nommu.c. The copy_to_user_page() was not
implemented on noMMU ARM.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08 10:44:22 +01:00
Catalin Marinas
b1a9ceb2e0 ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
Commit 31aa8fd6 introduced the __arm_ioremap_caller() function but the
nommu.c version did not have the _caller suffix.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08 10:44:21 +01:00
Russell King
35c44933ef Merge branch 'gemini_fix' of git://git.berlios.de/gemini-board into devel-stable 2010-05-07 21:39:35 +01:00
Catalin Marinas
ea056df796 ARM: 6093/1: Fix kernel memory printing for sparsemem
The show_mem() and mem_init() function are assuming that the page map is
contiguous and calculates the start and end page of a bank using (map +
pfn). This fails with SPARSEMEM where pfn_to_page() must be used.

Tested-by: Will Deacon <Will.Deacon@arm.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04 17:31:03 +01:00
Dave Estes
e220ba6022 arm: mm: qsd8x50: Fix incorrect permission faults
Handle incorrectly reported permission faults for qsd8650.  On
permission faults, retry MVA to PA conversion.  If retry detects
translation fault.  Report as translation fault.

Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Dave Estes <cestes@quicinc.com>
2010-05-03 11:15:05 -07:00
Russell King
fef88f1076 ARM: Add Versatile Express CA9x4 processor support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:39 +01:00
Hans Ulli Kroll
a3be632716 ARM: Gemini: fix compiler error in copypage-fa.c
Fix compiler error in copypage-fs.c
missing struct vm_area_struct *vma in function
fa_copy_user_highpage

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2010-04-27 12:45:10 +02:00
Russell King
4260415f6a ARM: fix build error in arch/arm/kernel/process.c
/tmp/ccJ3ssZW.s: Assembler messages:
/tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077'

This is caused because:

	.section .data
	.section .text
	.section .text
	.previous

does not return us to the .text section, but the .data section; this
makes use of .previous dangerous if the ordering of previous sections
is not known.

Fix up the other users of .previous; .pushsection and .popsection are
a safer pairing to use than .section and .previous.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-21 08:45:21 +01:00
Srinidhi Kasagar
8e797a7e4f ARM: 6027/1: ux500: enable l2x0 support
This enables the l2x0 support and ensures that the secondary
CPU can see the page table and secondary data at this point.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 16:08:10 +01:00
Russell King
f76348a360 ARM: remove unnecessary cache flush
This cache flush occurs when we first insert a page into the page
tables, where a page did not exist previously.  There can be no
cache lines associated with this virtual mapping, so this cache
flush is redundant.

Tested-by: Mike Rapoport <mike@compulab.co.il>
Tested-by: Mikael Pettersson <mikpe at it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 13:13:25 +01:00
Mika Westerberg
3f2d4f561f ARM: 6052/1: kdump: make kexec work in interrupt context
When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:31 +01:00
Nicolas Pitre
7e5a69e83b ARM: 6007/1: fix highmem with VIPT cache and DMA
The VIVT cache of a highmem page is always flushed before the page
is unmapped.  This cache flush is explicit through flush_cache_kmaps()
in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in
kunmap_atomic().  There is also an implicit flush of those highmem pages
that were part of a process that just terminated making those pages free
as the whole VIVT cache has to be flushed on every task switch. Hence
unmapped highmem pages need no cache maintenance in that case.

However unmapped pages may still be cached with a VIPT cache because the
cache is tagged with physical addresses.  There is no need for a whole
cache flush during task switching for that reason, and despite the
explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(),
some highmem pages that were mapped in user space end up still cached
even when they become unmapped.

So, we do have to perform cache maintenance on those unmapped highmem
pages in the context of DMA when using a VIPT cache.  Unfortunately,
it is not possible to perform that cache maintenance using physical
addresses as all the L1 cache maintenance coprocessor functions accept
virtual addresses only.  Therefore we have no choice but to set up a
temporary virtual mapping for that purpose.

And of course the explicit cache flushing when unmapping a highmem page
on a system with a VIPT cache now can go, which should increase
performance.

While at it, because the code in __flush_dcache_page() has to be modified
anyway, let's also make sure the mapped highmem pages are pinned with
kmap_high_get() for the duration of the cache maintenance operation.
Because kunmap() does unmap highmem pages lazily, it was reported by
Gary King <GKing@nvidia.com> that those pages ended up being unmapped
during cache maintenance on SMP causing segmentation faults.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:27 +01:00
Russell King
85b3cce880 ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
Write combining/cached device mappings are not setting the shared bit,
which could potentially cause problems on SMP systems since the cache
lines won't participate in the cache coherency protocol.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-04-09 15:00:11 +01:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Catalin Marinas
e7c5650f60 ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
The mandatory barriers (mb, rmb, wmb) are used even on uniprocessor
systems for things like ordering Normal Non-cacheable memory accesses
with DMA transfer (via Device memory writes). The current implementation
uses dmb() for mb() and friends but this is not sufficient. The DMB only
ensures the relative ordering of the observability of accesses by other
processors or devices acting as masters. In case of DMA transfers
started by writes to device memory, the relative ordering is not ensured
because accesses to slave ports of a device are not considered
observable by the DMB definition.

A DSB is required for the data to reach the main memory (even if mapped
as Normal Non-cacheable) before the device receives the notification to
begin the transfer. Furthermore, some L2 cache controllers (like L2x0 or
PL310) buffer stores to Normal Non-cacheable memory and this would need
to be drained with the outer_sync() function call.

The patch also allows platforms to define their own mandatory barriers
implementation by selecting CONFIG_ARCH_HAS_BARRIERS and providing a
mach/barriers.h file.

Note that the SMP barriers are unchanged (being DMBs as before) since
they are only guaranteed to work with Normal Cacheable memory.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:50 +00:00
Catalin Marinas
23107c5420 ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
The L2x0 cache controllers need to explicitly drain their write buffer
even for Normal Noncacheable memory accesses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:50 +00:00
Catalin Marinas
319f551a0a ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
This patch introduces the outer_cache_fns.sync function pointer together
with the OUTER_CACHE_SYNC config option that can be used to drain the
write buffer of the outer cache.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:49 +00:00
Linus Torvalds
ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Russell King
2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Russell King
bc85e585c6 Merge branch 'perf' into devel
Conflicts:
	arch/arm/Kconfig
2010-02-25 22:09:22 +00:00
Russell King
3560adf620 Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', 'pending-dma-streaming', 'u300' and 'umc' into devel 2010-02-25 22:06:43 +00:00
Kukjin Kim
d6d502fa4b ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
Add ARM_L1_CACHE_SHIFT_6 to arch/arm/Kconfig to allow CPUs with
L1 cache lines which are 64bytes to indicate this without having to
alter the arch/arm/mm/Kconfig entry each time.

Update the mm Kconfig so that ARM_L1_CACHE_SHIFT default value
uses this and change OMAP3 and S5PC1XX to select ARM_L1_CACHE_SHIFT_6.

Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24 21:07:22 +00:00
Russell King
ae1402022e ARM: make_coherent(): fix problems with highpte, part 2
update_mmu_cache() is called with the page table for the faulted-in
page still mapped.  We need to modify the PTE for this page to ensure
coherency with other shared mappings when multiple shared mappings
exist within a MM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:42:51 +00:00
Russell King
4b3073e1c5 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies.  We do this via make_coherent() by making the pages
uncacheable.

This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().

Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():

  On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
  to construct a pointer to the pte again.  Passing a pte_t * is much
  more elegant.  Maybe we might even replace the pte argument with the
  pte_t?

Ben Herrenschmidt would also like the pte pointer for PowerPC:

  Passing the ptep in there is exactly what I want.  I want that
  -instead- of the PTE value, because I have issue on some ppc cases,
  for I$/D$ coherency, where set_pte_at() may decide to mask out the
  _PAGE_EXEC.

So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.

Includes a fix from Stephen Rothwell:

  sparc: fix fallout from update_mmu_cache API change

  Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:41:46 +00:00
Russell King
d944d549aa ARM: allow alignment fault mode to be configured at kernel boot
Some glibc versions intentionally create lots of alignment faults in
their gconv code, which if not fixed up, results in segfaults during
boot.  This can prevent systems booting properly.

There is no clear hard-configurable default for this; the desired
default depends on the nature of the userspace which is going to be
booted.

So, provide a way for the alignment fault handler to be configured via
the kernel command line.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:20:49 +00:00
Fenkart/Bostandzhyan
a183927213 ARM: 5929/1: Add checks to detect overlap of memory regions.
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Fenkart/Bostandzhyan
c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00