Commit Graph

1449 Commits

Author SHA1 Message Date
Linus Torvalds
7cb9cf0224 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu arch updates from Greg Ungerer:
 "Most of it is a cleanup of the ColdFire hardware header files.  We
  have had a few occurrances of bugs caused by inconsistent definitions
  of peripheral addresses.  These patches make them all consistent, and
  also clean out a bunch of old crap.  Overall we remove about 1000
  lines."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (27 commits)
  m68knommu: fix inconsistent formating in ColdFire 5407 definitions
  m68knommu: fix inconsistent formating in ColdFire 5307 definitions
  m68knommu: fix inconsistent formating in ColdFire 527x definitions
  m68knommu: fix inconsistent formating in ColdFire 5272 definitions
  m68knommu: fix inconsistent formating in ColdFire 523x definitions
  m68knommu: clean up ColdFire 54xx General Timer definitions
  m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU
  m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x
  m68knommu: move ColdFire slice timer address defiens to 54xx header
  m68knommu: use read/write IO access functions in ColdFire m532x setup code
  m68knommu: modify ColdFire 532x GPIO register definitions to be consistent
  m68knommu: remove a lot of unsed definitions for 532x ColdFire
  m68knommu: use definitions for the ColdFire 528x FEC multi-function pins
  m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x
  m68knommu: remove unused ColdFire 5282 register definitions
  m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins
  m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses
  m68knommu: make remaining ColdFire 5272 register definitions absolute addresses
  m68knommu: make ColdFire Park and Assignment register definitions absolute addresses
  m68knommu: make ColdFire Chip Select register definitions absolute addresses
  ...
2012-10-07 21:06:10 +09:00
Jiri Kosina
16f3e95b32 cross-arch: don't corrupt personality flags upon exec()
Historically, the top three bytes of personality have been used for
things such as ADDR_NO_RANDOMIZE, which made sense only for specific
architectures.

We now however have a flag there that is general no matter the
architecture (UNAME26); generally we have to be careful to preserve the
personality flags across exec().

This patch tries to fix all architectures that forcefully overwrite
personality flags during exec() (ppc32 and s390 have been fixed recently
by commits f9783ec862 ("[S390] Do not clobber personality flags on
exec") and 59e4c3a2fe ("powerpc/32: Don't clobber personality flags on
exec") in a similar way already).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:47 +09:00
Arnd Bergmann
c37d6154c0 Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic
Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-04 22:57:51 +02:00
Linus Torvalds
9b2e077c42 Prepared for main script
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUGsfSBOxKuMESys7AQIQug/+LyViiXFmCSlM+lCGkp64/BfUvy0QHqN4
 K/dMvbZKOQbvmgps/xj8G+6diDzeO4hz8e1I3c/SEZ3M9TTz/Ppv1slfET9uUZ4X
 aLLHKqXihsxEOslw7mgp91KTd1Nr+e41f/5hr3j5Ap1HQB4yJa2mmj3reb48VfjD
 jmXo/dID66c2ExaVO7C8yyZXWgMGTfiy27qmEnMTxW7xQPt1oYsV2Bq0PCC/zEcq
 JgnwMatDVMy9en9wuEVMNelImE+XLm1T3XpLHL2WkV2JWSai98TcvGZnNKIxpFqu
 PueHWWCs5F5bZfn4bf6QOEstRTW76NL2qFNYrBPi0Zuq8Pm53ucnnzJUY8JFPPoR
 kXYmv8K73Jb10eHFuc3X4UyzvnhmJ7y3kG3jx7WoJVkW1KPgEFNmvMHkLyHgPZOU
 nT1tZiO0QHF4zi0JWMfK+7aeEY7EKfqRSce0F3Jw91vaIlEOIqgMgVJ1Y/nMhu3s
 92mpg8JDoAcgCghok4m4Pc1qO06Fe8Iw5Qap5KMdPutp5Br2ebLL5NrwdAE8LNpR
 7826r9RTMhyVRgNJ71JMFDY1IBeLeY0bxipN8dh6VYqMiKgClUeNwv7/tIgI4YS7
 acQ+GdcsgTtg5qx3xwX5N2TSJVvdwnXdnWhAw7wN48tbzH8LvMV61Pq8Ytc7iK3M
 cAMgkbxdZRk=
 =VtEQ
 -----END PGP SIGNATURE-----

Merge tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers

Pull preparatory patches for user API disintegration from David Howells:
 "The patches herein prepare for the extraction of the Userspace API
  bits from the various header files named in the Kbuild files.

  New subdirectories are created under either include/uapi/ or
  arch/x/include/uapi/ that correspond to the subdirectory containing
  that file under include/ or arch/x/include/.

  The new subdirs under the uapi/ directory are populated with Kbuild
  files that mostly do nothing at this time.  Further patches will
  disintegrate the headers in each original directory and fill in the
  Kbuild files as they do it.

  These patches also:

   (1) fix up #inclusions of "foo.h" rather than <foo.h>.

   (2) Remove some redundant #includes from the DRM code.

   (3) Make the kernel build infrastructure handle Kbuild files both in
       the old places and the new UAPI place that both specify headers
       to be exported.

   (4) Fix some kernel tools that #include kernel headers during their
       build.

  I have compile tested this with allyesconfig against x86_64,
  allmodconfig against i386 and a scattering of additional defconfigs of
  other arches.  Prepared for main script

  Signed-off-by: David Howells <dhowells@redhat.com>
  Acked-by: Arnd Bergmann <arnd@arndb.de>
  Acked-by: Thomas Gleixner <tglx@linutronix.de>
  Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
  Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
  Acked-by: Dave Jones <davej@redhat.com>
  Acked-by: H. Peter Anvin <hpa@zytor.com>"

* tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Plumb the UAPI Kbuilds into the user header installation and checking
  UAPI: x86: Differentiate the generated UAPI and internal headers
  UAPI: Remove the objhdr-y export list
  UAPI: Move linux/version.h
  UAPI: Set up uapi/asm/Kbuild.asm
  UAPI: x86: Fix insn_sanity build failure after UAPI split
  UAPI: x86: Fix the test_get_len tool
  UAPI: (Scripted) Set up UAPI Kbuild files
  UAPI: Partition the header include path sets and add uapi/ header directories
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
  UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
  UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-03 13:45:43 -07:00
Mark Brown
e7a570ff7d asm-generic: Add default clkdev.h
Ease the deployment of clkdev by providing a default asm/clkdev.h for
use if the arch does not have an include/asm/clkdev.h.

Due to limitations in Kbuild we manually add clkdev.h to all
architectures that don't have one rather than having the header appear
by default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-03 21:33:53 +02:00
Linus Torvalds
aecdc33e11 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...
2012-10-02 13:38:27 -07:00
David Howells
4413e16d9d UAPI: (Scripted) Set up UAPI Kbuild files
Set up empty UAPI Kbuild files to be populated by the header splitter.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:35 +01:00
David Howells
a1ce39288e UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers
Convert #include "..." to #include <path/...> in kernel system headers.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:25 +01:00
Linus Torvalds
cdeb9b0143 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
 "All pretty boring, seems like all of us had better things to do last
  summer..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/q40: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/amiga: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/apollo: Remove disabled definitions in apollohw.h
2012-10-01 13:55:51 -07:00
Linus Torvalds
3498d13b80 TTY merge for 3.7-rc1
As we skipped the merge window for 3.6-rc1 for the tty tree, everything
 is now settled down and working properly, so we are ready for 3.7-rc1.
 Here's the patchset, it's big, but the large changes are removing a
 firmware file and adding a staging tty driver (it depended on the tty
 core changes, so it's going through this tree instead of the staging
 tree.)
 
 All of these patches have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp36oACgkQMUfUDdst+yk4WgCdEy13hot8fI2Lqnc7W0LKu7GX
 4p8AoLTjzrXhLosxdijskDQ9X1OtjrxU
 =S5Ng
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...
2012-10-01 12:26:52 -07:00
Linus Torvalds
fdb2f9c2eb PCI changes for the 3.7 merge window:
Host bridge hotplug
     - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
     - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu)
     - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
     - Use standard list ops for acpi_pci_drivers (Jiang Liu)
 
   Device hotplug
     - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu)
     - Remove fakephp driver (Bjorn Helgaas)
     - Fix VGA ref count in hotplug remove path (Yinghai Lu)
     - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu)
     - Implement resume regardless of pciehp_force param (Oliver Neukum)
     - Make pci_fixup_irqs() work after init (Thierry Reding)
 
   Miscellaneous
     - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
     - Factor out PCI Express Capability accessors (Jiang Liu)
     - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan)
     - Make pci_error_handlers const (Stephen Hemminger)
     - Cleanup drivers/pci/remove.c (Bjorn Helgaas)
     - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas)
     - Use standard list ops for bus->devices (Bjorn Helgaas)
     - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
     - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQac4hAAoJEPGMOI97Hn6zjZYP/iaqU9kjmgTsBbSyzB4oApv/
 RRxo3I+ad9GF6XlMQfVAtyx1pgCD1gdGAtoDgGSCTqgdYD3CO10AxKU+yleAk1wo
 dbMxLifJNTrT3G1mZ/NL16yEGhCwvhfwzRtB1VoZmCT4lSApO/7cJkXl2DzHfA/i
 pmltOOiQCN8kbUcJbVPtUyTVPi2zl/8bsyCyTkS7YG0VXeGRM+ZUvPWZJ7MnWYYB
 5qoCdrw5ENCCiDQ9yw5SAfgL23b+0p6OI/x3Lkex0QQOWwSqGSiaHt4b7eitrC5b
 2eAJg32f/AzZke1YbKLMfdsL0VJP3GAswhDVHlgmo63rZkOZChm+97dgZ35Mcv5v
 kEXkWyBb1xJ3t8rZir6Qer9Iv2wOB+MkZ5qtU/Vf+l0wLQLYTrRVsKngrEDREONk
 dXbokp6iVSPeA1sTSdH9MmHlTUIj82ZLSGcxcjTsN8NWZjxx6g3rNx1uay+5MYOW
 4ET9zNu5snrAqN6N4Tb81gvtG8qYfxzdvVfrA9AaGKI6xxB7jkqgFJRp55JiEcFc
 x4cmWkhvdlhVsG2TQwFxYNfswOqD+7NCs6V4kSVZX6ezpDrH7I5VvcnnhstF7C8l
 KZul0EV7OW+kDK23pNe24lVP2xtOv6G8eK/3PmeKIXWl1V83nqre/oLufRzTfs+Z
 SxkILwY/MFpuCFteKE1t
 =haBu
 -----END PGP SIGNATURE-----

Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
    - Clear host bridge resource info to avoid issue when releasing
      (Yinghai Lu)
    - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
    - Use standard list ops for acpi_pci_drivers (Jiang Liu)

  Device hotplug
    - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang
      Liu)
    - Remove fakephp driver (Bjorn Helgaas)
    - Fix VGA ref count in hotplug remove path (Yinghai Lu)
    - Allow acpiphp to handle PCIe ports without native hotplug (Jiang
      Liu)
    - Implement resume regardless of pciehp_force param (Oliver Neukum)
    - Make pci_fixup_irqs() work after init (Thierry Reding)

  Miscellaneous
    - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
    - Factor out PCI Express Capability accessors (Jiang Liu)
    - Add pcibios_window_alignment() so powerpc EEH can use generic
      resource assignment (Gavin Shan)
    - Make pci_error_handlers const (Stephen Hemminger)
    - Cleanup drivers/pci/remove.c (Bjorn Helgaas)
    - Improve Vendor-Specific Extended Capability support (Bjorn
      Helgaas)
    - Use standard list ops for bus->devices (Bjorn Helgaas)
    - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
    - Reassign invalid bus number ranges (Intel DP43BF workaround)
      (Yinghai Lu)"

* tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits)
  PCI: acpiphp: Handle PCIe ports without native hotplug capability
  PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots
  PCI/ACPI: Protect acpi_pci_roots list with mutex
  PCI/ACPI: Use acpi_pci_root info rather than looking it up again
  PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface
  PCI/ACPI: Protect acpi_pci_drivers list with mutex
  PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges
  PCI/ACPI: Use normal list for struct acpi_pci_driver
  PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots
  PCI: Fix default vga ref_count
  ia64/PCI: Clear host bridge aperture struct resource
  x86/PCI: Clear host bridge aperture struct resource
  PCI: Stop all children first, before removing all children
  Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
  PCI: Provide a default pcibios_update_irq()
  PCI: Discard __init annotations for pci_fixup_irqs() and related functions
  PCI: Use correct type when freeing bus resource list
  PCI: Check P2P bridge for invalid secondary/subordinate range
  PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes
  xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()
  ...
2012-10-01 12:05:36 -07:00
Al Viro
d878d6dace m68k: switch to generic sys_execve()/kernel_execve()
The tricky part here is that task_pt_regs() on m68k works *only* for
process inside do_signal().  However, we need something much simpler -
pt_regs of a process inside do_signal() may be at different offsets
from the stack bottom, depending on the way we'd entered the kernel,
but for a task inside sys_execve() it *is* at constant offset.
Moreover, for a kernel thread about to become a userland process the
same location is also fine - setting sp to that will leave the kernel
stack pointer at the very bottom of the kernel stack when we finally
switch to userland.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01 00:44:44 -04:00
Al Viro
533e6903be m68k: split ret_from_fork(), simplify kernel_thread()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01 00:44:44 -04:00
Greg Ungerer
0973c687e0 m68k: always set stack frame format for ColdFire on thread start
The stack frame "format" field needs to be explicitly set on thread creation
on ColdFire. For a normal long word aligned user stack pointer the frame
format is 0x4.

We were doing this for non-MMU ColdFire, but not for the case with MMU enabled.
So fix it so we always do it if targeting ColdFire.

The old code happend to rely on the stack frame format being inhereted from
the process calling exec. Furture changes means that may not always work,
so we really do want to set it explicitly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01 00:44:43 -04:00
David S. Miller
6a06e5e1bb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/team/team.c
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/bat_iv_ogm.c
	net/ipv4/fib_frontend.c
	net/ipv4/route.c
	net/l2tp/l2tp_netlink.c

The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.

qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.

With help from Antonio Quartulli.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28 14:40:49 -04:00
David Howells
786d35d45c Make most arch asm/module.h files use asm-generic/module.h
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 14:31:03 +09:30
Greg Ungerer
a255172895 m68knommu: fix inconsistent formating in ColdFire 5407 definitions
Fix tab broken address defines to be consistent with others in this file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:08 +10:00
Greg Ungerer
cbf13821d3 m68knommu: fix inconsistent formating in ColdFire 5307 definitions
Fix tab broken address defines to be consistent with others in this file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:07 +10:00
Greg Ungerer
39dc5b7fce m68knommu: fix inconsistent formating in ColdFire 527x definitions
Fix tab broken address defines to be consistent with others in this file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:06 +10:00
Greg Ungerer
41e5be6a0e m68knommu: fix inconsistent formating in ColdFire 5272 definitions
Fix tab broken defines to be consistent with others in this file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:05 +10:00
Greg Ungerer
4617134eaf m68knommu: fix inconsistent formating in ColdFire 523x definitions
Fix tab broken address defines to be consistent with others in this file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:04 +10:00
Greg Ungerer
944c3d81db m68knommu: clean up ColdFire 54xx General Timer definitions
Convert the ColdFire 54xx CPU General Timer register address definitions to
include the MCF_MBAR peripheral region offset. This makes them consistent
with all other 54xx address register definitions (in m54xxsim.h).

The goal is to reduce different definitions used (some including offsets and
others not) causing bugs when used incorrectly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:03 +10:00
Greg Ungerer
632306f245 m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU
The Pin Assignment register definitions for the ColdFire 54xx CPU family are
inconsistently named and defined compared to the other ColdFire part
definitions. Rename them with the same prefix as used on other parts,
MCFGPIO_PAR_, and make their definitions include the MCF_MBAR periphperal
region offset.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:02 +10:00
Greg Ungerer
98d9696b38 m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x
The multi-function pin setup code for the FEC ethernet module is using just
plain wrong. Looks like it was cut-and-pasted from other init code. It has
hard coded register addresses that are incorrect for the 523x, and it is
manipulating bits that don't make sense.

Add proper register definitions for the Pin Assignment registers of the 532x,
and then use them to fix the setup code for the FEC hardware module.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:01 +10:00
Greg Ungerer
f2f41c68ea m68knommu: move ColdFire slice timer address defiens to 54xx header
Move the base address defines of the ColdFire 54xx CPU slice timers into the
54xx specific header (m54xxsim.h). They are CPU specific, and belong with the
CPU specific defines. Also make them relative to the MBAR peripheral region,
making the define the absolute address.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:01 +10:00
Greg Ungerer
6d8a1393ec m68knommu: use read/write IO access functions in ColdFire m532x setup code
Get rid of the use of local IO access macros and switch to using the standard
read*/write* family of access functions for the ColdFire m532x setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:00 +10:00
Greg Ungerer
e4c2b9befe m68knommu: modify ColdFire 532x GPIO register definitions to be consistent
The ColdFire 532x CPU register definitions for the multi-function setup
pins are inconsistently defined compared with other ColdFire parts. Modify
the register defintions to be just the addresses, not pointers. This also
fixes the erroneous use in one case of using these values in the UART setup
code for the 532x.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:59 +10:00
Greg Ungerer
23bcdacd88 m68knommu: remove a lot of unsed definitions for 532x ColdFire
There are a lot of unused and uneccessary definitions in the header to
support the ColdFire 532x CPU family. Remove the junk.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:58 +10:00
Greg Ungerer
a91f741589 m68knommu: use definitions for the ColdFire 528x FEC multi-function pins
Currently the setup code for the FEC multi-function pins on the ColdFire 528x
has the addresses hard coded in the code. Use the register defines that
already exist for this.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:57 +10:00
Greg Ungerer
f821e349cf m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x
Remove the last address definitions relative to the IPSBAR peripheral region
for the ColdFire 527x family. This involved cleaning up some magic numbers
used in the code part, and making them proper register definitions in the 527x
specific header.

This is part of the process of cleaning up the ColdFire register definitions
to make them consistently use absolute addresses for the primary registers.
This will reduce the occasional bugs caused by inconsistent definition of
the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:56 +10:00
Greg Ungerer
8a415c4be5 m68knommu: remove unused ColdFire 5282 register definitions
There is a bunch of old unused and ugly register definitions in the ColdFire
5282 header. Remove them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:55 +10:00
Greg Ungerer
4fb62ededf m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins
The registers used to configure and set the multifunction pins on the 5272
ColdFire are defined as absolute addresses. So the use of them does not need
to be offset relative to the peripheral region address.

Fix two cases of incorrect usage of these addresses. Both affect UART
initialization, one in the common UART pin setup code, the other in the
NETtel board specific UART signal handling.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:54 +10:00
Greg Ungerer
041a89a419 m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses
Make the ColdFire 5249 MBAR peripheral register definitions absolute
addresses, instead of offsets into the region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:53 +10:00
Greg Ungerer
d72a5abb7e m68knommu: make remaining ColdFire 5272 register definitions absolute addresses
Make the remaining definitions of the 5272 ColdFire registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:52 +10:00
Greg Ungerer
35142b915b m68knommu: make ColdFire Park and Assignment register definitions absolute addresses
Make all definitions of the ColdFire MPARK and IRQ Assignment registers
absolute addresses. Currently some are relative to the MBAR peripheral
region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:52 +10:00
Greg Ungerer
1419ea3b34 m68knommu: make ColdFire Chip Select register definitions absolute addresses
Make all definitions of the ColdFire Chip Select registers absolute addresses.
Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:51 +10:00
Greg Ungerer
c986a3d520 m68knommu: make ColdFire Interrupt Source register definitions absolute addresses
Make all definitions of the ColdFire Interrupt Source registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:50 +10:00
Greg Ungerer
a45f56b272 m68knommu: make ColdFire Pin Assignment register definitions absolute addresses
Make all definitions of the ColdFire Pin Assignment registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:49 +10:00
Greg Ungerer
660b73e356 m68knommu: make ColdFire watchdog register definitions absolute addresses
Make all definitions of the ColdFire Software watchdog registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:48 +10:00
Greg Ungerer
e1e362dc07 m68knommu: make ColdFire SYPCR and RSR register definitions absolute addresses
Make all definitions of the ColdFire Reset and System registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the abolsute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:47 +10:00
Greg Ungerer
6a3a786d02 m68knommu: make ColdFire IMR and IPR register definitions absolute addresses
Make all definitions of the ColdFire Interrupt Mask and Pending registers
absolute addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:46 +10:00
Philippe De Muyter
300b9ff609 m68knommu: use "r", not "i" constraint in cacheflush asm's
Let the compiler choose which register to use in the cache flushing
asm statements, instead of imposing %d0.

Additionally, fix two typo's.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:28:40 +10:00
Paul Bolle
0c0e6db806 m68k: drop unused parts of 68VZ328 Makefile
DRAGEN2 should obviously be CONFIG_DRAGEN2, but the screen.h entry it
triggers only references files that are nowhere to be found in the
current tree. Besides, nothing uses screen.h. So just drop all that.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:27:50 +10:00
Paul E. McKenney
593d1006cd Merge remote-tracking branch 'tip/core/rcu' into next.2012.09.25b
Resolved conflict in kernel/sched/core.c using Peter Zijlstra's
approach from https://lkml.org/lkml/2012/9/5/585.
2012-09-25 10:03:56 -07:00
Frederic Weisbecker
5b57ba37e8 m68k: Add missing RCU idle APIs on idle loop
In the old times, the whole idle task was considered
as an RCU quiescent state. But as RCU became more and
more successful overtime, some RCU read side critical
section have been added even in the code of some
architectures idle tasks, for tracing for example.

So nowadays, rcu_idle_enter() and rcu_idle_exit() must
be called by the architecture to tell RCU about the part
in the idle loop that doesn't make use of rcu read side
critical sections, typically the part that puts the CPU
in low power mode.

This is necessary for RCU to find the quiescent states in
idle in order to complete grace periods.

Add this missing pair of calls in the m68k's idle loop.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: m68k <linux-m68k@lists.linux-m68k.org>
Cc: <stable@vger.kernel.org> # 3.3+
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:44:47 -07:00
Al Viro
ddd03a1f75 get rid of generic instances of asm/exec.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-20 09:51:02 -04:00
Thierry Reding
8885b7b637 PCI: Provide a default pcibios_update_irq()
Most architectures implement this in exactly the same way. Instead of
having each architecture duplicate this function, provide a single
implementation in the core and make it a weak symbol so that it can be
overridden on architectures where it is required.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-18 17:28:21 -06:00
Lars-Peter Clausen
8ef997b67f ARM: 7534/1: clk: Make the managed clk functions generically available
The managed clk functions are currently only available when the generic clk
lookup framework is build. But the managed clk functions are merely wrappers
around clk_get and clk_put and do not depend on any specifics of the generic
lookup functions and there are still quite a few custom implementations of the
clk API. So make the managed functions available whenever the clk API is
implemented.

The patch also removes the custom implementation of devm_clk_get for the
coldfire platform.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-15 21:55:27 +01:00
Cong Wang
965505015b netfilter: remove xt_NOTRACK
It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-03 13:36:40 +02:00
Greg Kroah-Hartman
e372dc6c62 Merge 3.6-rc3 into tty-next
This picks up all of the different fixes in Linus's tree that we also need here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27 07:13:33 -07:00
Thomas Meyer
f82735d550 m68k: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
The semantic patch that makes this change is available
in scripts/coccinelle/api/ptr_ret.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-18 15:16:00 +02:00
Thomas Meyer
e786f6bfd6 m68k/q40: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
The semantic patch that makes this change is available
in scripts/coccinelle/api/ptr_ret.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-18 15:15:58 +02:00
Thomas Meyer
27b05e4d20 m68k/amiga: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
The semantic patch that makes this change is available
in scripts/coccinelle/api/ptr_ret.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-18 15:15:57 +02:00
Geert Uytterhoeven
b5486a49dc m68k/apollo: Remove disabled definitions in apollohw.h
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-18 15:15:56 +02:00
Greg Ungerer
42b1b94635 m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types
There is no specific atomic64 support code for any m68k CPUs, so we should
select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection
of this and select it for all m68k.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-17 10:04:24 +10:00
Greg Ungerer
e7d6582e04 m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types
The ColdFire CPU sub-arch has kernel clk code support, so select
CONFIG_HAVE_CLK.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-08-17 10:04:23 +10:00
Jiri Slaby
5920c2c9b9 TTY: nfcon, add tty_port and link it
Every tty driver needs tty_port for each line. So let us add one to
nfcon too. And link it so that the tty layer knows about it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13 16:50:20 -07:00
Linus Torvalds
587a9e1f95 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
2012-08-03 10:52:41 -07:00
Andreas Schwab
9e2760d18b m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
User space access must always go through uaccess accessors, since on
classic m68k user space and kernel space are completely separate.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-08-03 00:48:24 +02:00
Will Deacon
c1d7e01d78 ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead.  This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:21 -07:00
Linus Torvalds
2c05b2c838 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu arch update from Greg Ungerer:
 "Quite a varied set of changes this time.
   - A little more merge cleanup, this time the assembler entry code.
   - New sub-architecture support for the ColdFire 5251/5253 and 5441x
     CPU families.
   - Specific clk support code for the ColdFire 520x and 532x CPU
     familes.
   - Refactoring of the ColdFire GPIO support.
   - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx
     family).  This showed up a few problems with ColdFire cache,
     allocating coherent memory and bi-directional DMA support.  Fixes
     for those too."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
  m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs
  m68k: add PCI bus code support for the ColdFire M54xx SoC family
  m68k: add IO access definitions to support PCI on ColdFire platforms
  m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
  m68k: common PCI support definitions and code
  m68k: add support for DMA_BIDIRECTIONAL in dma support functions
  m68k: fix ColdFire clear cache operation
  m68k: use simpler dma_alloc_coherent() for ColdFire CPUs
  m68knommu: platform support for 8390 based ethernet used on some boards
  m68knommu: Add clk definitions for m532x.
  m68knommu: Add clk definitions for m520x.
  m68knommu: Add rtc device for m5441x.
  m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller.
  m68knommu: Add support for the Coldfire m5441x.
  m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
  coldfire-qspi: Add support for the Coldfire 5251/5253.
  m68knommu: Add support for the Coldfire 5251/5253
  m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips.
  m68k: merge the MMU and non-MMU versions of the entry.S code
  m68k: use jbsr to call functions instead of bsrl
  ...
2012-07-24 17:20:51 -07:00
Linus Torvalds
d14b7a419a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Trivial updates all over the place as usual."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
  Fix typo in include/linux/clk.h .
  pci: hotplug: Fix typo in pci
  iommu: Fix typo in iommu
  video: Fix typo in drivers/video
  Documentation: Add newline at end-of-file to files lacking one
  arm,unicore32: Remove obsolete "select MISC_DEVICES"
  module.c: spelling s/postition/position/g
  cpufreq: Fix typo in cpufreq driver
  trivial: typo in comment in mksysmap
  mach-omap2: Fix typo in debug message and comment
  scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
  Change email address for Steve Glendinning
  Btrfs: fix typo in convert_extent_bit
  via: Remove bogus if check
  netprio_cgroup.c: fix comment typo
  backlight: fix memory leak on obscure error path
  Documentation: asus-laptop.txt references an obsolete Kconfig item
  Documentation: ManagementStyle: fixed typo
  mm/vmscan: cleanup comment error in balance_pgdat
  mm: cleanup on the comments of zone_reclaim_stat
  ...
2012-07-24 13:34:56 -07:00
Geert Uytterhoeven
1525e06e44 m68k/apollo: Rename "timer" to "apollo_timer"
In file included from include/linux/kgdb.h:17,
                 from include/linux/fb.h:8,
                 from drivers/video/dnfb.c:15:
include/linux/serial_8250.h:71: error: expected identifier or ‘(’ before numeric constant
include/linux/serial_8250.h:72: error: expected ‘;’ before ‘struct’
make[1]: *** [drivers/video/dnfb.o] Error 1

This is caused by

    #define timer (IO_BASE + timer_physaddr)

in <asm/apollohw.h>, which conflicts with the new "timer" struct member in
<linux/serial_8250.h>.

Rename "timer" to "apollo_timer", as it's a way too generic name for a
global #define.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--
http://kisskb.ellerman.id.au/kisskb/buildresult/6739606/
2012-07-22 16:55:49 +02:00
Geert Uytterhoeven
2e76c2838a module.c: spelling s/postition/position/g
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-20 10:38:35 +02:00
Greg Ungerer
b1f7735ef4 m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs
All support code for the PCI bus hardware on the ColdFire 547x and 548x
CPUs is now in. Allow enabling of CONFIG_PCI for them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:45 +10:00
Greg Ungerer
bbdea849ed m68k: add PCI bus code support for the ColdFire M54xx SoC family
The ColdFire M54xx SoC family have a traditional PCI bus interface.
Add the core support code to access and use this bus on these parts.
This code provides all the config space access functions and IO access
functions. It also carries out the PCI bus initialization and hooks into
the kernel PCI subsystem.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:44 +10:00
Greg Ungerer
9ff601a41f m68k: add IO access definitions to support PCI on ColdFire platforms
Define the usual memory access functions (readb/writeb/...) and I/O space
functions (inb/outb/...) for PCI bus support on ColdFire CPU based platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-17 15:49:43 +10:00
Greg Ungerer
32be2acc7c m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
Add all the required definitoins to support the ColdFire M54xx SoC PCI
hardware unit. These are strait out of the MCF5475 Reference Manual.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:42 +10:00
Greg Ungerer
e93a6bbeb5 m68k: common PCI support definitions and code
Basic set of definitions and support code required to turn on CONFIG_PCI
for the m68k architecture. Nothing specific to any PCI implementation in
any m68k class CPU hardware yet.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-17 15:49:41 +10:00
Greg Ungerer
d2661c6215 m68k: add support for DMA_BIDIRECTIONAL in dma support functions
The dma cache support functions do not currently support the direction flag
DMA_BIDIRECTIONAL. If a driver passes this direction to dma_map_single or
friends you will get console output like this:

  dma_sync_single_for_device: unsupported dir 0

For example when using the Intel e100 ethernet driver on a ColdFire platform
with PCI bus. You will get a stream of these messages coming out.

Modify the dma cache support code adding support for DMA_BIDIRECTIONAL. It is
actioned by doing a cache push operation.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:40 +10:00
Greg Ungerer
f3ff6432dd m68k: fix ColdFire clear cache operation
The code for clearing (invalidating) the ColdFire cache is actually performing
a push operation. Add functions to clear the cache, and fix cache_clear() to
call the appropriate clear cache function.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:34 +10:00
Greg Ungerer
b60f187fec m68k: use simpler dma_alloc_coherent() for ColdFire CPUs
On all ColdFire platforms (whether MMU enabled or not) we want to use the
simple page based dma_alloc_coherent. We don't want the virtual mapping
version that is used on classic m68k setups. So modify the conditionals
to use the existing simpler dma_alloc_coherent on all ColdFire and non-MMU
builds.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Greg Ungerer
8b1e5a0626 m68knommu: platform support for 8390 based ethernet used on some boards
Quite a few of Freescale's older ColdFire development boards used an NS8390
based ethernet interface. Add a platform definition for the resources used
by these devices so we can use it on these boards.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King
12ce4c1f26 m68knommu: Add clk definitions for m532x.
The 532x has individually controllable clocks for it peripherals.  Add clk
definitions for these and add default initialization of either enabled or
disabled.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King
fe66158aaf m68knommu: Add clk definitions for m520x.
The 520x has individually controllable clocks for its peripherals.  Add clk
definitions for these and add default initialization of either enabled or
disabled for all of the clocks.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King
c785a3d728 m68knommu: Add rtc device for m5441x.
Add definitions for the m5441x rtc device and an init_BSP function to the
m5441x device code.

Signed-off-by: Steven King <sfking@fdwdc.com>
2012-07-16 09:59:21 +10:00
Steven King
32234328e2 m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller.
Extending the interrupt controller code in  intc-simr.c to support the third
interrupt controller on the m5441x means we need to add defines (as 0) for the
third interrupt controller on devices that don't have a third interrupt
controller.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Steven King
bea8bcb12d m68knommu: Add support for the Coldfire m5441x.
Add support for the Coldfire 5441x (54410/54415/54416/54417/54418).  Currently
we only support noMMU mode.  It requires the PIT patch posted previously as it
uses the PIT instead of the dma timer as a clock source so we can get all that
GENERIC_CLOCKEVENTS goodness.  It also adds some simple clk definitions and
very simple minded power management.  The gpio code is tweeked and some
additional devices are added to devices.c.  The Makefile uses -mv4e as
apparently, the only difference a v4m (m5441x) and a v4e is the later has a
FPU, which I don't think should matter to us in the kernel.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Steven King
bdee4e26ba m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 so we can support
those parts that have the pit1 interrupt on other than the first interrupt
controller.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Steven King
04e037aa4e m68knommu: Add support for the Coldfire 5251/5253
Basic support for the Coldfire 5251/5253.

Signed-off-by: Steven king <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Steven King
eac5794994 m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips.
If we're not connecting external GPIO extenders via i2c or spi or whatever, we
probably don't need GPIOLIB.  If we provide an alternate implementation of
the GPIOLIB functions to use when only on-chip GPIO is needed, we can change
ARCH_REQUIRE_GPIOLIB to ARCH_WANTS_OPTIONAL_GPIOLIB so that GPIOLIB becomes
optional.

The downside is that in the GPIOLIB=n case, we lose all error checking done by
gpiolib, ie multiply allocating the gpio, free'ing gpio etc., so that the
only checking that can be done is if we reference a gpio on an external part.
Targets that need the extra error checking can still select GPIOLIB=y.

For the case where GPIOLIB=y, we can simplify the table of gpio chips to use a
single chip, eliminating the tables of chips in the 5xxx.c files.  The
original motivation for the definition of multiple chips was to match the way
many of the Coldfire variants defined their gpio as a spare array in memory.
However, all this really gains us is some error checking when we request a
gpio, gpiolib can check that it doesn't fall in one of the holes.  If thats
important, I think we can still come up with a better way of accomplishing
that.

Also in this patch is some general cleanup and reorganizing of the gpio header
files (I'm sure I must have had a reason why I sometimes used a prefix of
mcf_gpio and other times mcfgpio but for the life of me I can't think of it
now).

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Greg Ungerer
14be4252ea m68k: merge the MMU and non-MMU versions of the entry.S code
Some of the entry.S code is common to both MMU and non-MMU builds.
So merge the entry_no.S and entry_mm.S files back into a single file.
With a little code movement we only need a single #ifdef.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-16 09:59:21 +10:00
Greg Ungerer
28d5445e94 m68k: use jbsr to call functions instead of bsrl
There is a few places that the m68k entry code uses the bsrl instruction
to call other functions. That instruction is only supported on 68020 and
higher CPU types. If we use jbsr instead the code will be clean for all
68k and ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-16 09:59:20 +10:00
Greg Ungerer
5bd9dd4501 m68k: use some direct calls to ret_from_exception in entry code
The ret_from_excption code is referenced by its function name, or by a label
set at the start of its code. The non-MMU code can share some of this code
if we make direct calls to ret_from_exception instead of the associated label.
The effected function paths are: buserr, trap and ret_from_fork. So change
these to branch directly to ret_from_exception.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-16 09:59:20 +10:00
Greg Ungerer
064bff1c9f net: add support for NS8390 based eth controllers on some ColdFire CPU boards
A number of older ColdFire CPU based boards use NS8390 based network
controllers. Most use the Davicom 9008F or the UMC 9008F. This driver
provides the support code to get these devices working on these platforms.

Generally the NS8390 based eth device is direct connected via the general
purpose bus of the ColdFire CPU. So its addressing and interrupt setup is
fixed on each of the different platforms (classic platform setup).

This driver is based on the other drivers/net/ethernet/8390 drivers, and
includes the lib8390.c code. It uses the existing definitions of the
board NS8390 device addresses, interrupts and access types from the
arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into
the driver code and out of that header.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:45 -07:00
Greg Ungerer
2c624880fb m68knommu: move the badly named mcfne.h to a better mcf8390.h
The mcfne.h include contains definitions to support NS8390 eth based hardware
on ColdFire based CPU boards. So change its name to reflect that better.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:44 -07:00
Paul Bolle
a8ab98484a m68k: Remove never used asm/shm.h
m68k's asm/shm.h header has been part of the tree ever since m68k
support got added in v1.3.94. (It started as /include/asm-m68k/shm.h and
moved to its current location a few years ago.) It seems it was never
used: no file ever included it and nothing used the macros it defines.

(Actually, from v2.5.46 until v2.6.29-rc3 it was included by m68knommu's
asm/shm.h. But that header was just a very thin wrapper for this header
and was itself unused too.)

This header can safely be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27 09:59:44 +02:00
Geert Uytterhoeven
d670b47958 m68k/sun3: Remove unselectable code in prom_init()
This was copied from SPARC, but isn't relevant for the supported Sun-3
models.

[Geert] Also remove the related extern declarations, and update the
	comment about prom_init().

Reported-by: Sarah Nadi <snadi@uwaterloo.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27 09:59:44 +02:00
Geert Uytterhoeven
e653614b28 m68k: Use asm-generic version of <asm/sections.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-27 09:59:44 +02:00
Geert Uytterhoeven
dc0610518f m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need
to wrap our own _[se]bss around it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-27 09:59:43 +02:00
Greg Ungerer
dfe1d26d4a m68knommu: Allow ColdFire CPUs to use unaligned accesses
All of the current Linux supported ColdFire CPUs handle unaligned
memory accesses. So remove the CONFIG_CPU_HAS_NO_UNALIGNED option
selection for ColdFire. If we ever support a specific ColdFire CPU
that does not support unaligned accesses then we can insert the
CONFIG_CPU_HAS_NO_UNALIGNED for that specific CPU type.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27 09:28:50 +02:00
Paul Bolle
dffc5837d8 m68k: Remove five unused headers
There are five entirely unused headers in arch/m68k/include/asm. Nothing
includes these headers. And a few tests found no hits for the things
they provide (which makes sense).

MC68332.h, mac_mouse.h, and mcfmbus.h are all unused since at least
v2.6.12-rc2 (I didn't bother looking further back than that).

apollodma.h is unused since v2.6.19: commit
2ed0ce5b57 ("m68k/Apollo: Remove obsolete
arch/m68k/apollo/dma.c") removed the last file interested in that
header.

And everything interested in <asm/sbus.h> was removed in the v2.6.28
release cycle. The last occurrence of "sbus.h" was deleted with commit
0c0db98b50 ("sparc: Remove
Documentation/sparc/sbus_drivers.txt"). I'm not sure whether anything
relevant for m68k was included in v2.6.27, but it doesn't really matter.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Greg Ungerer<gerg@uclinux.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27 09:27:31 +02:00
Greg Ungerer
19a1d332cc m68knommu: define a local devm_clk_get() function
Commit f4d40de39a ("net fec: do not depend
on grouped clocks") breaks compilation of the FEC driver for non iMX
platforms in linux-3.5-rc1. For example when compiling for ColdFire I get:

      LD      vmlinux
    drivers/built-in.o: In function `fec_probe':
    fec.c:(.devinit.text+0x1e0): undefined reference to `devm_clk_get'

Define a simple devm_clk_get() function for the m68knommu architecture.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-25 09:17:20 +10:00
Linus Torvalds
6ddb99043c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven.

This makes m68k use the generic library functions for the user-space
strn[cpy|len] functions.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()
2012-06-13 23:17:12 +03:00
Greg Ungerer
70c778f7a1 m68k: make syscall_trace_enter/leave exist for non-MMU classic m68k types
The assembler entry code calls directly to the syscall_trace_enter() and
syscall_trace_leave() functions. But currently they are conditionaly
compiled out for the non-MMU classic m68k CPU types (so 68328 for example),
resulting in a link error:

      LD      vmlinux
    arch/m68k/platform/68328/built-in.o: In function `do_trace':
    (.text+0x1c): undefined reference to `syscall_trace_enter'
    arch/m68k/platform/68328/built-in.o: In function `do_trace':
    (.text+0x4c): undefined reference to `syscall_trace_leave'

Change the conditional check that includes these functions to be true for
the !defined(CONFIG_MMU) case as well.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-12 11:58:29 +10:00
Greg Ungerer
1b461d7631 m68knommu: fix 68360 local setting of timer interrupt handler
Compiling for 68360 based targets fails with:

    arch/m68k/platform/68360/config.c: In function ‘hw_tick’:
    arch/m68k/platform/68360/config.c:55:2: error: implicit declaration of function ‘arch_timer_interrupt’
    arch/m68k/platform/68360/config.c: At top level:
    arch/m68k/platform/68360/config.c:64:6: error: conflicting types for ‘hw_timer_init’
    arch/m68k/include/asm/machdep.h:36:13: note: previous declaration of ‘hw_timer_init’ was here

Changes made to hw_timer_init() didn't get updated in the 68328 timer code.
So process and call the "handler" arg that is now passed into that
hw_timer_init() function.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12 11:58:28 +10:00
Greg Ungerer
dc5588ae3c m68knommu: fix 68328 local setting of timer interrupt handler
Compiling for 68328 based targets fails with:

    arch/m68k/platform/68328/timers.c: In function ‘hw_tick’:
    arch/m68k/platform/68328/timers.c:65:2: error: implicit declaration of function ‘arch_timer_interrupt’
    arch/m68k/platform/68328/timers.c: At top level:
    arch/m68k/platform/68328/timers.c:102:6: error: conflicting types for ‘hw_timer_init’
    arch/m68k/include/asm/machdep.h:36:13: note: previous declaration of ‘hw_timer_init’ was here

Changes made to hw_timer_init() didn't get updated in the 68328 timer code.
So process and call the "handler" arg that is now passed into that
hw_timer_init() function.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12 11:58:27 +10:00
Greg Ungerer
b13b3f51ff m68k: fix inclusion of arch_gettimeoffset for non-MMU 68k classic CPU types
When building for non-MMU based classic 68k CPU types (like the 68328 for
example) you get a compilation error:

  CC      arch/m68k/kernel/time.o
arch/m68k/kernel/time.c:91:5: error: redefinition of ‘arch_gettimeoffset’
include/linux/time.h:145:19: note: previous definition of ‘arch_gettimeoffset’ was here

The arch_gettimeoffset() code is included when building for these CPU types,
but it shouldn't be. Those machine types do not have
CONFIG_ARCH_USES_GETTIMEOFFSET set.

The fix is simply to conditionally include the arch_gettimeoffset() code on
that same config setting that specifies its use or not.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-12 11:58:26 +10:00
Steven King
f75b0d07da m68knommu: m528x qspi definition fix
The consolidation of the qspi code missed a definition for 528x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12 11:58:25 +10:00
Geert Uytterhoeven
7df0d27f3d m68k: CPU32 does not support unaligned accesses
Hence select CPU_HAS_NO_UNALIGNED

Reported-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:33 +02:00
Geert Uytterhoeven
9f1f118035 m68k: Introduce config option CPU_HAS_NO_UNALIGNED
Use CONFIG_CPU_HAS_NO_UNALIGNED instead of open coding CONFIG_M68000 ||
CONFIG_COLDFIRE

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:32 +02:00
Geert Uytterhoeven
5df58f3aac m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:30 +02:00
Geert Uytterhoeven
022613e0b0 m68k: Move CPU_HAS_* config options
They belong together with the CPU selection

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:29 +02:00
Geert Uytterhoeven
f2378ed905 m68k: Remove duplicate FPU config option
It's also defined in arch/m68k/Kconfig.cpu

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:28 +02:00
Geert Uytterhoeven
54503b1da7 m68knommu: Clean up printing of sections
- Remove casts and unneeded address-of ('&') operators,
  - Use %p to format pointers, %lx to format unsigned longs.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-10 10:18:27 +02:00
Geert Uytterhoeven
2ef0d3e64f m68k: Use asm-generic version of <asm/types.h>
The extra definition for BITS_PER_LONG we had is also indirectly provided
by <asm-generic/types.h>, via <asm-generic/int-ll64.h> and
<asm/bitsperlong.h>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-10 10:18:26 +02:00
Geert Uytterhoeven
2bbc89a8e9 m68k: Use Kbuild logic to import asm-generic headers
Replace all headers files that just include their asm-generic version by
Kbuild logic

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-10 10:18:25 +02:00
Geert Uytterhoeven
d8ce7263e1 m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-06 15:31:28 +02:00
Linus Torvalds
86c47b70f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01 11:53:44 -07:00
Linus Torvalds
1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Al Viro
efee984c27 new helper: signal_delivered()
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:52 -04:00
Al Viro
77097ae503 most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:51 -04:00
Al Viro
a610d6e672 pull clearing RESTORE_SIGMASK into block_sigmask()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
Al Viro
b7f9a11a6c new helper: sigmask_to_save()
replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:48 -04:00
Al Viro
51a7b448d4 new helper: restore_saved_sigmask()
first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper.  Open-coded instances switched...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
Linus Torvalds
fb21affa49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull second pile of signal handling patches from Al Viro:
 "This one is just task_work_add() series + remaining prereqs for it.

  There probably will be another pull request from that tree this
  cycle - at least for helpers, to get them out of the way for per-arch
  fixes remaining in the tree."

Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  keys: kill task_struct->replacement_session_keyring
  keys: kill the dummy key_replace_session_keyring()
  keys: change keyctl_session_to_parent() to use task_work_add()
  genirq: reimplement exit_irq_thread() hook via task_work_add()
  task_work_add: generic process-context callbacks
  avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
  parisc: need to check NOTIFY_RESUME when exiting from syscall
  move key_repace_session_keyring() into tracehook_notify_resume()
  TIF_NOTIFY_RESUME is defined on all targets now
2012-05-31 18:47:30 -07:00
Al Viro
bb8ac181a5 bury __kernel_nlink_t, make internal nlink_t consistent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
Linus Torvalds
07acfc2a93 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Avi Kivity:
 "Changes include additional instruction emulation, page-crossing MMIO,
  faster dirty logging, preventing the watchdog from killing a stopped
  guest, module autoload, a new MSI ABI, and some minor optimizations
  and fixes.  Outside x86 we have a small s390 and a very large ppc
  update.

  Regarding the new (for kvm) rebaseless workflow, some of the patches
  that were merged before we switch trees had to be rebased, while
  others are true pulls.  In either case the signoffs should be correct
  now."

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h.

I suspect the kvm_para.h resolution ends up doing the "do I have cpuid"
check effectively twice (it was done differently in two different
commits), but better safe than sorry ;)

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits)
  KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block
  KVM: s390: onereg for timer related registers
  KVM: s390: epoch difference and TOD programmable field
  KVM: s390: KVM_GET/SET_ONEREG for s390
  KVM: s390: add capability indicating COW support
  KVM: Fix mmu_reload() clash with nested vmx event injection
  KVM: MMU: Don't use RCU for lockless shadow walking
  KVM: VMX: Optimize %ds, %es reload
  KVM: VMX: Fix %ds/%es clobber
  KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte()
  KVM: VMX: unlike vmcs on fail path
  KVM: PPC: Emulator: clean up SPR reads and writes
  KVM: PPC: Emulator: clean up instruction parsing
  kvm/powerpc: Add new ioctl to retreive server MMU infos
  kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM
  KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler
  KVM: PPC: Book3S: Enable IRQs during exit handling
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Fix stbux emulation
  KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields
  ...
2012-05-24 16:17:30 -07:00
Linus Torvalds
b1bf7d4d1b GPIO driver changes for v3.5 merge window
Lots of gpio changes, both to core code and drivers.  Changes do touch
 architecture code to remove the need for separate arm/gpio.h includes
 in most architectures.  Some new drivers are added, and a number of
 gpio drivers are converted to use irq_domains for gpio inputs used as
 interrupts.  Device tree support has been amended to allow multiple
 gpio_chips to use the same device tree node.  Remaining changes are
 primarily bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvpFBAAoJEEFnBt12D9kB50EP/0q2co+Ddlz4DWM07TLMgTw8
 eCSi79+oB85RcE+0FlAo/SJu9VlYDKSLT3wMbIyycfJi3cUtOb+hay0j+wxcn4bz
 G2qXj2Het5rX6hFI2tSCvJfDqMwU0wEygn9a6a/bw3VGSOIVmMTmRswrbbBcFzVu
 8xobviN7LANLEZyhd4Ip5YfrcWH9ABmmhZX7ihn1AJubVL47xGo0uds9ZFX1sAKB
 Zyr80+BeUK7mhZ74UUfQHtS+x24JD62OLM9eaQN0/BBAqBewQJlxhMakPbTGmcuO
 Vy3CPmZiWw6tdVWgKvxE7cIXLI4YbB2B6w2TRJBBkFAlz4RsO2bFU/ibEv1vg9YE
 oxAUelMj0INdY4iRT135fDJTIGauWon22Tqd2MVtun4r6fwcL0BgFYN6yCMtEqbx
 bpYkKTi6tdyE7k2Ph+carCIuw9SwOk/4pm1xCWC0k6YdAnRE0zykCLvAuAabpmzs
 i/H1jcp/F4KSYldEoDlGYG4lFZiISthxOy9l6/d4GrBj723attrmztolMfrpFLF6
 XPTf7HODQFmZ6n7mBIjCg4hoqydAYyKcW7lROc7DKkEXIWOeeeA+EoTytkwPLLz5
 CBLoZfDoqUT8xa2vv4MZ/+G9chSDi5vMryqEYi9tXMbVEZW31xqh6hxk0xPMcY13
 qVAaRlcz49AQjWq/0vR4
 =U6hj
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull GPIO driver changes from Grant Likely:
 "Lots of gpio changes, both to core code and drivers.

  Changes do touch architecture code to remove the need for separate
  arm/gpio.h includes in most architectures.

  Some new drivers are added, and a number of gpio drivers are converted
  to use irq_domains for gpio inputs used as interrupts.  Device tree
  support has been amended to allow multiple gpio_chips to use the same
  device tree node.

  Remaining changes are primarily bug fixes."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
  gpio/generic: initialize basic_mmio_gpio shadow variables properly
  gpiolib: Remove 'const' from data argument of gpiochip_find()
  gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
  gpiolib: quiet gpiochip_add boot message noise
  gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
  gpio/lpc32xx: Add device tree support
  gpio: Adjust of_xlate API to support multiple GPIO chips
  gpiolib: Implement devm_gpio_request_one()
  gpio-mcp23s08: dbg_show: fix pullup configuration display
  Add support for TCA6424A
  gpio/omap: (re)fix wakeups on level-triggered GPIOs
  gpio/omap: fix broken context restore for non-OFF mode transitions
  gpio/omap: fix missing check in *_runtime_suspend()
  gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
  gpio/omap: remove suspend/resume callbacks
  gpio/omap: remove retrigger variable in gpio_irq_handler
  gpio/omap: remove saved_wakeup field from struct gpio_bank
  gpio/omap: remove suspend_wakeup field from struct gpio_bank
  gpio/omap: remove saved_fallingdetect, saved_risingdetect
  gpio/omap: remove virtual_irq_start variable
  ...

Conflicts:
	drivers/gpio/gpio-samsung.c
2012-05-24 14:01:46 -07:00
Linus Torvalds
c7523a7c88 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner.

Various trivial conflict fixups in arch Kconfig due to addition of
unrelated entries nearby.  And one slightly more subtle one for sparc32
(new user of GENERIC_CLOCKEVENTS), fixed up as per Thomas.

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  timekeeping: Fix a few minor newline issues.
  time: remove obsolete declaration
  ntp: Fix a stale comment and a few stray newlines.
  ntp: Correct TAI offset during leap second
  timers: Fixup the Kconfig consolidation fallout
  x86: Use generic time config
  unicore32: Use generic time config
  um: Use generic time config
  tile: Use generic time config
  sparc: Use: generic time config
  sh: Use generic time config
  score: Use generic time config
  s390: Use generic time config
  openrisc: Use generic time config
  powerpc: Use generic time config
  mn10300: Use generic time config
  mips: Use generic time config
  microblaze: Use generic time config
  m68k: Use generic time config
  m32r: Use generic time config
  ...
2012-05-24 13:29:46 -07:00
Al Viro
a42c6ded82 move key_repace_session_keyring() into tracehook_notify_resume()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-23 22:09:20 -04:00
Linus Torvalds
f9369910a6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull first series of signal handling cleanups from Al Viro:
 "This is just the first part of the queue (about a half of it);
  assorted fixes all over the place in signal handling.

  This one ends with all sigsuspend() implementations switched to
  generic one (->saved_sigmask-based).

  With this, a bunch of assorted old buglets are fixed and most of the
  missing bits of NOTIFY_RESUME hookup are in place.  Two more fixes sit
  in arm and um trees respectively, and there's a couple of broken ones
  that need obvious fixes - parisc and avr32 check TIF_NOTIFY_RESUME
  only on one of two codepaths; fixes for that will happen in the next
  series"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (55 commits)
  unicore32: if there's no handler we need to restore sigmask, syscall or no syscall
  xtensa: add handling of TIF_NOTIFY_RESUME
  microblaze: drop 'oldset' argument of do_notify_resume()
  microblaze: handle TIF_NOTIFY_RESUME
  score: add handling of NOTIFY_RESUME to do_notify_resume()
  m68k: add TIF_NOTIFY_RESUME and handle it.
  sparc: kill ancient comment in sparc_sigaction()
  h8300: missing checks of __get_user()/__put_user() return values
  frv: missing checks of __get_user()/__put_user() return values
  cris: missing checks of __get_user()/__put_user() return values
  powerpc: missing checks of __get_user()/__put_user() return values
  sh: missing checks of __get_user()/__put_user() return values
  sparc: missing checks of __get_user()/__put_user() return values
  avr32: struct old_sigaction is never used
  m32r: struct old_sigaction is never used
  xtensa: xtensa_sigaction doesn't exist
  alpha: tidy signal delivery up
  score: don't open-code force_sigsegv()
  cris: don't open-code force_sigsegv()
  blackfin: don't open-code force_sigsegv()
  ...
2012-05-23 18:11:45 -07:00
Linus Torvalds
ec0d7f18ab Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull fpu state cleanups from Ingo Molnar:
 "This tree streamlines further aspects of FPU handling by eliminating
  the prepare_to_copy() complication and moving that logic to
  arch_dup_task_struct().

  It also fixes the FPU dumps in threaded core dumps, removes and old
  (and now invalid) assumption plus micro-optimizes the exit path by
  avoiding an FPU save for dead tasks."

Fixed up trivial add-add conflict in arch/sh/kernel/process.c that came
in because we now do the FPU handling in arch_dup_task_struct() rather
than the legacy (and now gone) prepare_to_copy().

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: drop the fpu state during thread exit
  x86, xsave: remove thread_has_fpu() bug check in __sanitize_i387_state()
  coredump: ensure the fpu state is flushed for proper multi-threaded core dump
  fork: move the real prepare_to_copy() users to arch_dup_task_struct()
2012-05-23 10:59:07 -07:00
Linus Torvalds
e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Al Viro
a54f1655be m68k: add TIF_NOTIFY_RESUME and handle it.
TIF_NOTIFY_RESUME added (as bit 5).  That way nommu glue needs no changes at
all; mmu one needs just to replace jmi do_signal_return to jne do_signal_return
There we have flags shifted up, until bit 6 (SIGPENDING) is in MSBit; instead
of checking that MSBit is set (jmi) we check that MSBit or something below it
is set (jne); bits 0..4 are never set, so that's precisely "bit 6 or bit 5 is
set".

Usual handling of NOTIFY_RESUME/SIGPENDING is done in do_notify_resume(); glue
calls it instead of do_signal().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:59:47 -04:00
Matt Fleming
43a3599556 m68k: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f2
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures.  In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:52:37 -04:00
Al Viro
68f3f16d9a new helper: sigsuspend()
guts of saved_sigmask-based sigsuspend/rt_sigsuspend.  Takes
kernel sigset_t *.

Open-coded instances replaced with calling it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:52:30 -04:00
Linus Torvalds
bf67f3a5c4 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug cleanups from Thomas Gleixner:
 "This series is merily a cleanup of code copied around in arch/* and
  not changing any of the real cpu hotplug horrors yet.  I wish I'd had
  something more substantial for 3.5, but I underestimated the lurking
  horror..."

Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and
arch/sparc/include/asm/thread_info_32.h

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
  um: Remove leftover declaration of alloc_task_struct_node()
  task_allocator: Use config switches instead of magic defines
  sparc: Use common threadinfo allocator
  score: Use common threadinfo allocator
  sh-use-common-threadinfo-allocator
  mn10300: Use common threadinfo allocator
  powerpc: Use common threadinfo allocator
  mips: Use common threadinfo allocator
  hexagon: Use common threadinfo allocator
  m32r: Use common threadinfo allocator
  frv: Use common threadinfo allocator
  cris: Use common threadinfo allocator
  x86: Use common threadinfo allocator
  c6x: Use common threadinfo allocator
  fork: Provide kmemcache based thread_info allocator
  tile: Use common threadinfo allocator
  fork: Provide weak arch_release_[task_struct|thread_info] functions
  fork: Move thread info gfp flags to header
  fork: Remove the weak insanity
  sh: Remove cpu_idle_wait()
  ...
2012-05-21 19:43:57 -07:00
Linus Torvalds
06930b94d1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu tree from Greg Ungerer:
 "More merge and clean up of MMU and non-MMU common files, namely
  signal.c and dma.c.  There is also a simplification of the ColdFire
  GPIO setup tables.  Using a couple of simple macros we make the init
  tables really small and easy to read, and save a couple of thousand
  lines of code.  Also a move of all the ColdFire subarch support files
  into the existing coldfire directory.  The sub-directories just ended
  up duplicating Makefiles and now only contain really simple pieces of
  code.  This saves quite a few lines of code too.

  As always a couple of bugs fixes thrown in too.  Oh and a new
  defconfig for the ColdFire platforms that support having the MMU
  enabled."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (39 commits)
  m68k: add a defconfig for the M5475EVB ColdFire with MMU board
  m68knommu: unaligned.h fix for M68000 core
  m68k: merge the MMU and non-MMU versions of the arch dma code
  m68knommu: reorganize the no-MMU cache flushing to match m68k
  m68knommu: move the 54xx platform code into the common ColdFire code directory
  m68knommu: move the 532x platform code into the common ColdFire code directory
  m68knommu: move the 5407 platform code into the common ColdFire code directory
  m68knommu: move the 5307 platform code into the common ColdFire code directory
  m68knommu: move the 528x platform code into the common ColdFire code directory
  m68knommu: move the 527x platform code into the common ColdFire code directory
  m68knommu: move the 5272 platform code into the common ColdFire code directory
  m68knommu: move the 5249 platform code into the common ColdFire code directory
  m68knommu: move the 523x platform code into the common ColdFire code directory
  m68knommu: move the 520x platform code into the common ColdFire code directory
  m68knommu: move the 5206 platform code into the common ColdFire code directory
  m68knommu: simplify the ColdFire 5407 GPIO struct setup
  m68knommu: simplify the ColdFire 532x GPIO struct setup
  m68knommu: simplify the ColdFire 5307 GPIO struct setup
  m68knommu: simplify the ColdFire 528x GPIO struct setup
  m68knommu: simplify the ColdFire 527x GPIO struct setup
  ...
2012-05-21 19:15:03 -07:00
Thomas Gleixner
764e0da14f timers: Fixup the Kconfig consolidation fallout
Sigh, I missed to check which architecture Kconfig files actually
include the core Kconfig file. There are a few which did not. So we
broke them.

Instead of adding the includes to those, we are better off to move the
include to init/Kconfig like we did already with irqs and others.

This does not change anything for the architectures using the old
style periodic timer mode. It just solves the build wreckage there.

For those architectures which use the clock events infrastructure it
moves the include of the core Kconfig file to "General setup" which is
a way more logical place than having it at random locations specified
by the architecture specific Kconfigs.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@glx-um.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 23:43:46 +02:00
Linus Torvalds
881bcabbde Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Setup CROSS_COMPILE at the top
  m68k: Correct the Atari ALLOWINT definition
  m68k/video: Create <asm/vga.h>
  m68k: Make sure {read,write}s[bwl]() are always defined
  m68k/mm: Port OOM changes to do_page_fault()
  scsi/atari: Make more functions static
  scsi/atari: Revive "atascsi=" setup option
  net/ariadne: Improve debug prints
  m68k/atari: Change VME irq numbers from unsigned long to unsigned int
  m68k/amiga: Use arch_initcall() for registering platform devices
  m68k/amiga: Add error checks when registering platform devices
  m68k/amiga: Mark z_dev_present() __init
  m68k: Remove unused MAX_NOINT_IPL definition
2012-05-21 12:43:54 -07:00
Anna-Maria Gleixner
60a5e4c3d3 m68k: Use generic time config
Signed-off-by: Anna-Maria Gleixner <anna-maria@glx-um.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20120518163105.808606368@glx-um.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 11:01:42 +02:00
Greg Ungerer
7094ac08cb m68k: add a defconfig for the M5475EVB ColdFire with MMU board
Add a default configuration for the newly supported ColdFire CPUs running
with MMU enabled. This is based on Freescales own M5475EVB demo board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:23:05 +10:00
Luis Alves
b2fb49bf2a m68knommu: unaligned.h fix for M68000 core
This patch fixes unaligned memory access for the 68000 core based cpu's.

Some time ago, my cpu (68000) was raising address/bus error's when mounting
cifs shares (didn't bother to debug it at the time). After developing the
MMC/SD card driver I was having the same issue when mounting the vfat fs.

I've traced the issue down to the 'unaligned.h' file. (I guess nobody has
ever used unaligned.h back in the 68328 'era'.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:23:04 +10:00
Greg Ungerer
5641686c23 m68k: merge the MMU and non-MMU versions of the arch dma code
The majority of the m68k architecture dma code is the same, so merge the
current separated files dma_no.c and dma_mm.c back into a single dma.c

The main alloc and free routines are a little different, so we keep a
single #ifdef based on CONFIG_MMU for them. All the other support functions
are now identical.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20 21:22:56 +10:00
Greg Ungerer
1744bd921c m68knommu: reorganize the no-MMU cache flushing to match m68k
Introduce cache_push() and cache_clear() functions for the non-MMU m68k
devices. With these in place we can more easily merge some of the common
m68k arch code.

In particular by reorganizing the __flush_cache_all() code and separating
the cache push and clear functions it becomes trivial to implement the
new cache_push() and cache_clear() functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20 21:22:08 +10:00
Greg Ungerer
453549d2e5 m68knommu: move the 54xx platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:07 +10:00
Greg Ungerer
e33e73f560 m68knommu: move the 532x platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:06 +10:00
Greg Ungerer
9f8c8c072d m68knommu: move the 5407 platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:05 +10:00
Greg Ungerer
136f148f61 m68knommu: move the 5307 platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:04 +10:00
Greg Ungerer
76148ab8b7 m68knommu: move the 528x platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:04 +10:00
Greg Ungerer
60fb32ca61 m68knommu: move the 527x platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:03 +10:00
Greg Ungerer
40711ccb22 m68knommu: move the 5272 platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:02 +10:00
Greg Ungerer
2d11251168 m68knommu: move the 5249 platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:01 +10:00
Greg Ungerer
4bf648fa98 m68knommu: move the 523x platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:22:00 +10:00
Greg Ungerer
a654730ec1 m68knommu: move the 520x platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:21:59 +10:00
Greg Ungerer
daacd5cc25 m68knommu: move the 5206 platform code into the common ColdFire code directory
All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:21:58 +10:00
Greg Ungerer
f198f9cd85 m68knommu: simplify the ColdFire 5407 GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:57 +10:00
Greg Ungerer
bb70e21b52 m68knommu: simplify the ColdFire 532x GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:56 +10:00
Greg Ungerer
24d4502632 m68knommu: simplify the ColdFire 5307 GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:55 +10:00
Greg Ungerer
e774921c17 m68knommu: simplify the ColdFire 528x GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:54 +10:00
Greg Ungerer
748dddb6fa m68knommu: simplify the ColdFire 527x GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:53 +10:00
Greg Ungerer
6621c5cde9 m68knommu: simplify the ColdFire 5272 GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:52 +10:00
Greg Ungerer
60e26cfd0b m68knommu: simplify the ColdFire 5249 GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:51 +10:00
Greg Ungerer
045f8c4af4 m68knommu: simplify the ColdFire 523x GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:50 +10:00
Greg Ungerer
a10cf320d8 m68knommu: simplify the ColdFire 520x GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:49 +10:00
Greg Ungerer
a75250b3d5 m68knommu: simplify the ColdFire 5206 GPIO struct setup
The GPIO data struct setup is now the only remaining code in the platform
gpio.c file. So move it to the platform config.c code and remove the gpio.c
file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:48 +10:00
Greg Ungerer
f23c144d42 m68knommu: make duplicated ColdFire GPIO init code common for all
The code that adds each ColdFire platforms GPIO signals is duplicated in
each platforms specific code. Remove it from each platforms code and put
a single version in the existing ColdFire gpio subsystem init code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:47 +10:00
Greg Ungerer
943c0cd0ad m68knommu: switch to GPIO init macros in ColdFire 532x init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:46 +10:00
Greg Ungerer
322eaaff60 m68knommu: switch to GPIO init macros in ColdFire 5407 init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:45 +10:00
Greg Ungerer
df1a000e76 m68knommu: switch to GPIO init macros in ColdFire 5307 init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:44 +10:00
Greg Ungerer
c222f5f41f m68knommu: switch to GPIO init macros in ColdFire 528x init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

We also need to rename some of the GPIO registers to be consistent with
all other ColdFire parts (we can't use the new GPIO macros otherwise).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:43 +10:00
Greg Ungerer
174d2ca390 m68knommu: switch to GPIO init macros in ColdFire 527x init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:42 +10:00
Greg Ungerer
26b7c8270b m68knommu: switch to GPIO init macros in ColdFire 5272 init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:41 +10:00
Greg Ungerer
56248926ec m68knommu: switch to GPIO init macros in ColdFire 5249 init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:41 +10:00
Greg Ungerer
32ec635089 m68knommu: switch to GPIO init macros in ColdFire 523x init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:40 +10:00
Greg Ungerer
5d89633d76 m68knommu: switch to GPIO init macros in ColdFire 520x init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:39 +10:00
Greg Ungerer
6f84758edb m68knommu: switch to GPIO init macros in ColdFire 5206 init code
Modify the GPIO setup table to use the mcfgpio.h macros for table init.
Simplifies code and reduces line count significantly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:38 +10:00
Greg Ungerer
c269d4efaa m68knommu: introduce macros to simplify ColdFire GPIO table initialization
We have very large tables in the ColdFire CPU GPIO setup code that essentially
boil down to 2 distinct types of GPIO pin initiaization. Using 2 macros we can
reduce these large tables to at most a dozen lines of setup code, and in quite
a few cases a single table entry.

Introduce these 2 macros into the existing mcfgpio.h header.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20 21:21:35 +10:00
Ezequiel Garcia
f106eac91e m68k: fix compiler warning by properly inlining flat_set_persistent()
This patch removes the following warning:
fs/binfmt_flat.c:752: warning: unused variable 'persistent'.
There is neither functionality change, nor extra code generated.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20 21:21:33 +10:00
Greg Ungerer
0c22fafd31 m68k: merge the MMU and non-MMU signal.c code
The MMU (signal_mm.c) and non-MMU (signal_no.c) versions of the m68k
architecture signal handling code are very similar. Most of their code is
the same.

Merge the two back into a single signal.c, and move some of the code around
inside the file to minimize the number of #ifdefs required. Specificially
we can group out the CONFIG_FPU and the CONFIG_MMU code. We end up needing
a few other "#ifdef CONFIG_MMU" as well, but not too many.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20 21:21:08 +10:00
Oskar Schirmer
b7799b05d8 arm/m68k: Change mail address of Sebastian Hess
That old mail address doesnt exist any more.
This changes all occurences to a current address.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Acked-by: Sebastian Heß <shess@hessware.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-17 15:17:18 +02:00
Suresh Siddha
55ccf3fe3f fork: move the real prepare_to_copy() users to arch_dup_task_struct()
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of
the architectures and the rest following the x86 model of flushing the extended
register state like fpu there.

Remove it and use the arch_dup_task_struct() instead.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.com
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-16 15:16:26 -07:00
Geert Uytterhoeven
f25e918e35 m68k: Setup CROSS_COMPILE at the top
CROSS_COMPILE must be setup before using e.g. cc-option (and a few other
as-*, cc-*, ld-* macros), else they will check against the wrong compiler
when cross-compiling, and may invoke the cross compiler with wrong or
suboptimal compiler options.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-05-16 14:02:04 +02:00
Mark Brown
7563bbf89d gpiolib/arches: Centralise bolierplate asm/gpio.h
Rather than requiring architectures that use gpiolib but don't have any
need to define anything custom to copy an asm/gpio.h provide a Kconfig
symbol which architectures must select in order to include gpio.h and
for other architectures just provide the trivial implementation directly.

This makes it much easier to do gpiolib updates and is also a step towards
making gpiolib APIs available on every architecture.

For architectures with existing boilerplate code leave a stub header in
place which warns on direct inclusion of asm/gpio.h and includes
linux/gpio.h to catch code that's doing this.  Direct inclusion of
asm/gpio.h has long been deprecated.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-11 18:00:14 -06:00
Steven King
83ca60094e m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module.

This version of the patch combines changes to the config files and  device.c
and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion).

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-08 13:06:51 +10:00
Thomas Gleixner
a6359d1eec init_task: Replace CONFIG_HAVE_GENERIC_INIT_TASK
Now that all archs except ia64 are converted, replace the config and
let the ia64 select CONFIG_ARCH_INIT_TASK

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085035.867948914@linutronix.de
2012-05-05 13:00:46 +02:00
Thomas Gleixner
ab5fc1ffb9 m68k: Use generic init_task
Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20120503085034.816195285@linutronix.de
2012-05-05 13:00:23 +02:00
Mikael Pettersson
c663600584 m68k: Correct the Atari ALLOWINT definition
Booting a 3.2, 3.3, or 3.4-rc4 kernel on an Atari using the
`nfeth' ethernet device triggers a WARN_ONCE() in generic irq
handling code on the first irq for that device:

WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x134/0x142()
irq 3 handler nfeth_interrupt+0x0/0x194 enabled interrupts
Modules linked in:
Call Trace: [<000299b2>] warn_slowpath_common+0x48/0x6a
 [<000299c0>] warn_slowpath_common+0x56/0x6a
 [<00029a4c>] warn_slowpath_fmt+0x2a/0x32
 [<0005b34c>] handle_irq_event_percpu+0x134/0x142
 [<0005b34c>] handle_irq_event_percpu+0x134/0x142
 [<0000a584>] nfeth_interrupt+0x0/0x194
 [<001ba0a8>] schedule_preempt_disabled+0x0/0xc
 [<0005b37a>] handle_irq_event+0x20/0x2c
 [<0005add4>] generic_handle_irq+0x2c/0x3a
 [<00002ab6>] do_IRQ+0x20/0x32
 [<0000289e>] auto_irqhandler_fixup+0x4/0x6
 [<00003144>] cpu_idle+0x22/0x2e
 [<001b8a78>] printk+0x0/0x18
 [<0024d112>] start_kernel+0x37a/0x386
 [<0003021d>] __do_proc_dointvec+0xb1/0x366
 [<0003021d>] __do_proc_dointvec+0xb1/0x366
 [<0024c31e>] _sinittext+0x31e/0x9c0

After invoking the irq's handler the kernel sees !irqs_disabled()
and concludes that the handler erroneously enabled interrupts.

However, debugging shows that !irqs_disabled() is true even before
the handler is invoked, which indicates a problem in the platform
code rather than the specific driver.

The warning does not occur in 3.1 or older kernels.

It turns out that the ALLOWINT definition for Atari is incorrect.

The Atari definition of ALLOWINT is ~0x400, the stated purpose of
that is to avoid taking HSYNC interrupts.  irqs_disabled() returns
true if the 3-bit ipl & 4 is non-zero.  The nfeth interrupt runs at
ipl 3 (it's autovector 3), but 3 & 4 is zero so irqs_disabled() is
false, and the warning above is generated.

When interrupts are explicitly disabled, ipl is set to 7.  When they
are enabled, ipl is masked with ALLOWINT.  On Atari this will result
in ipl = 3, which blocks interrupts at ipl 3 and below.  So how come
nfeth interrupts at ipl 3 are received at all?  That's because ipl
is reset to 2 by Atari-specific code in default_idle(), again with
the stated purpose of blocking HSYNC interrupts.  This discrepancy
means that ipl 3 can remain blocked for longer than intended.

Both default_idle() and falcon_hblhandler() identify HSYNC with
ipl 2, and the "Atari ST/.../F030 Hardware Register Listing" agrees,
but ALLOWINT is defined as if HSYNC was ipl 3.

[As an experiment I modified default_idle() to reset ipl to 3, and
as expected that resulted in all nfeth interrupts being blocked.]

The fix is simple: define ALLOWINT as ~0x500 instead.  This makes
arch_local_irq_enable() consistent with default_idle(), and prevents
the !irqs_disabled() problems for ipl 3 interrupts.

Tested on Atari running in an Aranym VM.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Michael Schmitz <schmitzmic@googlemail.com> (on Falcon/CT60)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:50 +02:00
Geert Uytterhoeven
5c3f968712 m68k/video: Create <asm/vga.h>
For now, it just contains the hack for cirrusfb on Amiga, which is moved
out of <video/vga.h> with some slight modifications (use raw_*() instead of
z_*(), which are defined on all m68k platforms).

This makes it safe to include <video/vga.h> in all contexts. Before it
could fail to compile with

include/video/vga.h: In function ‘vga_mm_r’:
include/video/vga.h:242: error: implicit declaration of function ‘z_readb’
include/video/vga.h: In function ‘vga_mm_w’:
include/video/vga.h:247: error: implicit declaration of function ‘z_writeb’
include/video/vga.h: In function ‘vga_mm_w_fast’:
include/video/vga.h:253: error: implicit declaration of function ‘z_writew’

or

include/video/vga.h:23:21: error: asm/vga.h: No such file or directory

depending on the value of CONFIG_AMIGA.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
2012-04-22 20:16:50 +02:00
Geert Uytterhoeven
f5db9c6a3d m68k: Make sure {read,write}s[bwl]() are always defined
drivers/usb/musb/musb_io.h provides default implementations for
{read,write}s[bwl]() on most platforms, some of which will conflict soon
with platform-specific counterparts on m68k.

To avoid having to add more platform-specific checks to musb_io.h later,
make sure {read,write}s[bwl]() are always defined on m68k, and disable the
default implementations in musb_io.h on m68k, like is already done for
several other architectures.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Felipe Balbi <balbi@ti.com>
2012-04-22 20:16:50 +02:00
Kautuk Consul
b637a6b167 m68k/mm: Port OOM changes to do_page_fault()
Commit d065bd810b
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to m68k.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:49 +02:00
Geert Uytterhoeven
44883eb023 m68k/atari: Change VME irq numbers from unsigned long to unsigned int
Device interrupts numbers were changed to unsigned int in 1997, the year
IRQ_MACHSPEC was killed as well.

Also kill a related cast while we're at it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: netdev@vger.kernel.org
2012-04-22 20:16:49 +02:00
Geert Uytterhoeven
e2b56288af m68k/amiga: Use arch_initcall() for registering platform devices
module_init() maps to device_initcall(), opening the possibility of
race conditions between platform_driver_probe() and registering platform
devices.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:48 +02:00
Geert Uytterhoeven
eeed227966 m68k/amiga: Add error checks when registering platform devices
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:48 +02:00
Geert Uytterhoeven
943ce30806 m68k/amiga: Mark z_dev_present() __init
It's called from amiga_init_devices() only, which is __init.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:48 +02:00
Geert Uytterhoeven
2712a643ad m68k: Remove unused MAX_NOINT_IPL definition
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-22 20:16:47 +02:00
Greg Ungerer
938ed25008 m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire
The CONFIG_FEC2 define was removed from the kernel many versions ago.
But it is still being used to set the multi-function pins when compiling
for a ColdFire 527[45] SoC that has 2 ethernet interfaces. Remove the
last remaining uses of this define, and so fix the setting of the pins
for the 2nd ethernet interface.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17 17:06:34 +10:00
Greg Ungerer
bfdd769ac5 m68knommu: fix id number for second eth device on 5275 ColdFire
The second ColdFire FEC ethernet device should have an id number of 1,
not 0. Otherwise it clashes with the first FEC ethernet device.

On booting a kernel on a 5275 based board you will get messages out of
the kernel like this:

    <4>------------[ cut here ]------------
    <4>WARNING: at fs/sysfs/dir.c:508 0x0a8b50()
    <4>sysfs: cannot create duplicate filename 'fec.0'

And likely you won't be able to completely boot up after this at all.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17 16:58:35 +10:00
Masanari Iida
6b2aac42b2 Fix typo in various Kconfig file
Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:40:08 +02:00
Greg Ungerer
89d786011f m68knommu: move and fix the 68VZ328 platform bootlogo.h
The 68EZ328/bootlogo.h is not actually used in the 68EZ328 platform code
at all. It is used by the 68VZ328 platform code though, so move it to be
with the rest of the 68VZ328 platform code.

Commit c0e0c89c08 ("fix broken boot logo
inclusion") modified the bootlogo code to not be included in asm code.
Modify 68VZ328/bootlogo.h so that the bootlogo bit map is named correctly
for direct use in the C code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16 15:11:04 +10:00
Greg Ungerer
acb0c7accd m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328
The 68EZ328 and 68VZ328 platforms currently try to process their bootlogo.h
to make it clean to include in asm files. This is no longer used, the
bootlogo.h file is now included only in C code, so remove all the processing
code in the 68EZ328 and 68VZ328 Makefiles.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16 15:11:04 +10:00
Eric B Munson
3b5d56b931 kvmclock: Add functions to check if the host has stopped the vm
When a host stops or suspends a VM it will set a flag to show this.  The
watchdog will use these functions to determine if a softlockup is real, or the
result of a suspended VM.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
asm-generic changes Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:48:59 +03:00
Geert Uytterhoeven
450aed725c m68k/q40: Add missing platform check before registering platform devices
On multi-platform kernels, the Q40/Q60 platform devices should be
registered when running on Q40/Q60 only. Else it may crash later.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-01 22:57:53 +02:00
Geert Uytterhoeven
6cfeba5391 m68k/mac: Add missing platform check before registering platform devices
On multi-platform kernels, the Mac platform devices should be registered
when running on Mac only. Else it may crash later.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-04-01 22:57:51 +02:00
Greg Ungerer
7224c0d104 m68k: include asm/cmpxchg.h in our m68k atomic.h
After commit 9ffc93f203 ("Remove all

  CC      init/main.o
In file included from include/linux/mm.h:15:0,
                 from include/linux/ring_buffer.h:5,
                 from include/linux/ftrace_event.h:4,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/main.c:16:
include/linux/debug_locks.h: In function ‘__debug_locks_off’:
include/linux/debug_locks.h:16:2: error: implicit declaration of function ‘xchg’

There is no indirect inclusions of the new asm/cmpxchg.h for m68k here.
Looking at most other architectures they include asm/cmpxchg.h in their
asm/atomic.h. M68k currently does not do this. Including this in atomic.h
fixes all m68k build problems.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-01 22:57:49 +02:00
Linus Torvalds
a591afc01d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...
2012-03-29 18:12:23 -07:00
David Howells
141124c020 Delete all instances of asm/system.h
Delete all instances of asm/system.h as they should be redundant by this
point.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
David Howells
803f69144f Disintegrate asm/system.h for M68K
Disintegrate asm/system.h for M68K.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
2012-03-28 18:30:02 +01:00
David Howells
2501cf768e m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer
Fix the m68k versions of xchg() and cmpxchg() to fail to link if given an
inappropriately sized pointer rather than BUG()'ing at runtime.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
2012-03-28 18:30:02 +01:00
Linus Torvalds
7bfe0e66d5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...
2012-03-22 20:20:18 -07:00
Linus Torvalds
b57cb7231b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu arch updates from Greg Ungerer:
 "Includes a cleanup of the non-MMU linker script (it now almost
  exclusively uses the well defined linker script support macros and
  definitions).  Some more merging of MMU and non-MMU common files
  (specifically the arch process.c, ptrace and time.c).  And a big
  cleanup of the massively duplicated ColdFire device definition code.

  Overall we remove about 2000 lines of code, and end up with a single
  set of platform device definitions for the serial ports, ethernet
  ports and QSPI ports common in most ColdFire SoCs.

  I expect you will get a merge conflict on arch/m68k/kernel/process.c,
  in cpu_idle().  It should be relatively strait forward to fixup."

And cpu_idle() conflict resolution was indeed trivial (merging the
nommu/mmu versions of process.c trivially conflicting with the
conversion to use the schedule_preempt_disabled() helper function)

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits)
  m68knommu: factor more common ColdFire cpu reset code
  m68knommu: make 528x CPU reset register addressing consistent
  m68knommu: make 527x CPU reset register addressing consistent
  m68knommu: make 523x CPU reset register addressing consistent
  m68knommu: factor some common ColdFire cpu reset code
  m68knommu: move old ColdFire timers init from CPU init to timers code
  m68knommu: clean up init code in ColdFire 532x startup
  m68knommu: clean up init code in ColdFire 528x startup
  m68knommu: clean up init code in ColdFire 523x startup
  m68knommu: merge common ColdFire QSPI platform setup code
  m68knommu: make 532x QSPI platform addressing consistent
  m68knommu: make 528x QSPI platform addressing consistent
  m68knommu: make 527x QSPI platform addressing consistent
  m68knommu: make 5249 QSPI platform addressing consistent
  m68knommu: make 523x QSPI platform addressing consistent
  m68knommu: make 520x QSPI platform addressing consistent
  m68knommu: merge common ColdFire FEC platform setup code
  m68knommu: make 532x FEC platform addressing consistent
  m68knommu: make 528x FEC platform addressing consistent
  m68knommu: make 527x FEC platform addressing consistent
  ...
2012-03-21 18:17:51 -07:00
Linus Torvalds
3b59bf0816 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20 21:04:47 -07:00
Linus Torvalds
843ec558f9 tty and serial merge for 3.4-rc1
Here's the big serial and tty merge for the 3.4-rc1 tree.
 
 There's loads of fixes and reworks in here from Jiri for the tty layer,
 and a number of patches from Alan to help try to wrestle the vt layer
 into a sane model.
 
 Other than that, lots of driver updates and fixes, and other minor
 stuff, all detailed in the shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9nihQACgkQMUfUDdst+ylXTQCdFuwVuZgjCts+xDVa1jX2ac84
 UogAn3Wr+P7NYFN6gvaGm52KbGbZs405
 =2b/l
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...
2012-03-20 11:24:39 -07:00
Dmitry Torokhov
b675b3667f Merge commit 'v3.3-rc6' into next 2012-03-09 10:55:17 -08:00
Jiri Slaby
2f16669d32 TTY: remove re-assignments to tty_driver members
All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.

pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:37:58 -08:00
Greg Ungerer
ae909ea4ad m68knommu: factor more common ColdFire cpu reset code
Most of the more modern ColdFire cores use the same code to reset the CPU
(but it is different to most of the earlier cores). Currently that is
duplicated in each of the sub-arch files. Pull out this common code and
out a single copy of it with the other common reset code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:28 +10:00
Greg Ungerer
645e5333ec m68knommu: make 528x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:27 +10:00
Greg Ungerer
0b2a213905 m68knommu: make 527x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:26 +10:00
Greg Ungerer
320de7d01c m68knommu: make 523x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:25 +10:00
Greg Ungerer
d894b89bf7 m68knommu: factor some common ColdFire cpu reset code
A number of the early ColdFire cores use the same code to reset the CPU.
Currently that is duplicated in each of the sub-arch files. Pull out this
common code and use a single copy of it for all CPU types that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:41:48 +10:00
Greg Ungerer
440f6ffc06 m68knommu: move old ColdFire timers init from CPU init to timers code
The original ColdFire timer interrupt setup is used by most of the users
of the original ColdFire timer code. But the code is currently duplicated
in each of the ColdFire CPU specific init files. Move it to the timers
code that it is really part of. It is strait forward to make it conditional
on also having the original interrupt engine that it needs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:10 +10:00
Greg Ungerer
c05793c733 m68knommu: clean up init code in ColdFire 532x startup
We can move all the init calls in the initcall code into the more general
arch setup code (which is config_BSP() here). That makes the 532x consistent
with other ColdFire CPUs setup code. It means we can get rid of the initcall
setup here all together. Also make sure we set the arch mach_reset function
pointer to get the local arch reset code called on reset.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:10 +10:00
Greg Ungerer
9773be5f5f m68knommu: clean up init code in ColdFire 528x startup
We can move all the init calls in the initcall code into the more general
arch setup code (which is config_BSP() here). That makes the 528x consistent
with other ColdFire CPUs setup cod. It means we can get rif of the initcall
setup here all together.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
2ba168a913 m68knommu: clean up init code in ColdFire 523x startup
We can move the QSPI init call to the more general config_BSP() code on
the 523x platorm setup code. Then we can remove the initcall code all
together.

We can also remove the un-needed include of mcfuart.h while we are
cleaning up here too.

Also I noticed that we are not calling the fec_init() code here, and we
should be doing that. Put that back in too.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
fa1fc24662 m68knommu: merge common ColdFire QSPI platform setup code
The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

This also results in few platforms no longer needing any local platform
setup code. In those cases remove the empty devices array and initcall
code as well.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
ed8a2798f6 m68knommu: make 532x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 532x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
3b2039b266 m68knommu: make 528x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 528x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
6c84a60eb9 m68knommu: make 527x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 527x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
2424f54902 m68knommu: make 5249 QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 5249 QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
36d175a4b2 m68knommu: make 523x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 523x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
a4e2e2ac08 m68knommu: make 520x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 520x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
b7ce7f0d0e m68knommu: merge common ColdFire FEC platform setup code
The ColdFire FEC is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
504695479e m68knommu: make 532x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 532x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
4f8f9fb8cb m68knommu: make 528x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 528x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
308bfc12dd m68knommu: make 527x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 527x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
9a11b493ed m68knommu: make 5272 FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 5272 FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
21634593b4 m68knommu: make 523x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 523x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
d4e08372e3 m68knommu: make 520x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 520x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
55148f6f88 m68knommu: merge common ColdFire UART IRQ setup
Some ColdFire CPU UART hardware modules can configure the IRQ they use.
Currently the same setup code is duplicated in the init code for each of
these ColdFire CPUs. Merge all this code to a single instance.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
0d2fe94647 m68knommu: merge common ColdFire UART platform setup code
The ColdFire UART is common to all ColdFire CPU's. No need to duplicate
its platform setup code for every CPU family member. Merge all the setup
code into a single shared file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
b9a0c3f88e m68knommu: simplify the 54xx UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
b77fb7faa9 m68knommu: simplify the 5407 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
a75bc61952 m68knommu: simplify the 532x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
7bdebba492 m68knommu: simplify the 5307 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
cae82a836d m68knommu: simplify the 528x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
1eb1391638 m68knommu: simplify the 527x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
6b656e8a74 m68knommu: simplify the 5272 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
43d94b7f92 m68knommu: simplify the 5249 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
b92225c716 m68knommu: simplify the 520x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
a579748dc1 m68knommu: simplify the 5206 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
bbbeeaf2f7 m68knommu: make 54xx UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 54xx UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
69d23b610a m68knommu: make 5407 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5407 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
35b7cf22c6 m68knommu: make 532x UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 532x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
f8bb5327a8 m68knommu: make 528x UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 528x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
909159feb3 m68knommu: make 5307 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5307 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
20e681fdfa m68knommu: make 527x UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 527x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00
Greg Ungerer
023e0555a9 m68knommu: make 5272 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5272 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
e8f69e545e m68knommu: make 5249 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5249 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
13682af349 m68knommu: make 523x UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 523x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
ffc203bc19 m68knommu: make 520x UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 520x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
8400ca322e m68knommu: make 5206 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5206 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
fde3944141 m68k: merge the MMU and non-MMU versions of process.c
The MMU and non-MMU varients of the m68k arch process.c code are pretty
much the same. Only a few minor details differ between the two. The
majority of the difference is to deal with having or wanting hardware FPU
support. So merge them back into a single process.c file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
9657a87205 m68k: make support for FPU hardware configurable
The classic m68k code has always supported an FPU (although it may have
been a software emulated one). The non-MMU m68k code has never supported FPU
hardware. To help in merging common code create a configation setting that
signifies if we are builing in FPU support or not.

This switch, CONFIG_FPU, is set as per the current use cases. So it is
always enabled if CONFIG_MMU is set, and disabled otherwise. With a little
extra code it will be possible to disable it on the classic m68k platforms
as well, and to enable it on non-MMU platforms that do have hardware FPU.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
43dec91f4d m68k: merge the mmu and non-mmu versions of ptrace.c
Most of the code in the non-mmu ptrace_no.c file is the same as the mmu
version ptrace_mm.c. So merge them back into a single file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:04 +10:00
Greg Ungerer
397ac99c6c m68k: remove dead timer code
The set_rtc_mmss() function is defined "static inline" but is never used
in this file. Remove it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:04 +10:00
Greg Ungerer
fa7f9e7fad m68k: merge mmu and non-mmu versions of time.c
There is only trivial differences between the mmu time_mm.c and non-mmu
time_no.c files. Merge them back into a single time.c.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:04 +10:00
Greg Ungerer
b6c58e8af0 m68knommu: remove unused CONFIG_GENERIC_CMOS_UPDATE option
The CONFIG_GENERIC_CMOS_UPDATE switch is always enabled for the non-MMU
m68k case. But the underlying code to support it, update_persistent_clock(),
doesn't end up doing anything on the currently supported non-MMU platforms.
No platforms supply the necessary function support for writing back the RTC.

So lets remove this option and support code. This also brings m68knommu
in line with the m68k, which doesn't enabled this switch either.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:04 +10:00
Greg Ungerer
35aefb2645 m68knommu: modify timer init code to make it consistent with m68k code
With a few small changes we can make the m68knommu timer init code the
same as the m68k code. By using the mach_sched_init function pointer
and reworking the current timer initializers to keep track of the common
m68k timer_interrupt() handler we end up with almost identical code for
m68knommu.

This will allow us to more easily merge the mmu and non-mmu m68k time.c
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:04 +10:00
Greg Ungerer
9517746131 m68knommu: make persistent clock code consistent with m68k
The read_persistent_clock() code is different on m68knommu, for really no
reason. With a few changes to support function names and some code
re-organization the code can be made the same.

This will make it easier to merge the arch/m68k/kernel/time.c for m68k and
m68knommu in a future patch.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Greg Ungerer
d3f033f894 m68knommu: remove reduntant definitions of _ramvec
The base of the real RAM resident hardware vectors, _ramvec, is declared in
our asm/traps.h. No need to have local declarations spread around in other
files that use this. So remove them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Greg Ungerer
f84f52a5c1 m68knommu: clean up linker script
There is a lot of years of collected cruft in the m68knommu linker script.
Clean it all up and use the well defined linker script support macros.

Support is maintained for building both ROM/FLASH based and RAM based setups.
No major changes to section layouts, though the rodata section is now lumped
in with the read/write data section.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Greg Ungerer
10cb54de2c m68knommu: hard set the ColdFire MBAR register on startup
The ColdFire MBAR register that holds the mapping of the peripheral region
on some ColdFire CPUs is configurable. It can be configured at some address
different to that of the bootloader that loaded the kernel. So hard set
the MBAR register mapping at kernel startup time.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:03 +10:00
Thomas Gleixner
bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
David S. Miller
ff4783ce78 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/sfc/rx.c

Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change
the rx_buf->is_page boolean into a set of u16 flags, and another to
adjust how ->ip_summed is initialized.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26 21:55:51 -05:00
Ben Greear
3bdc0eba0b net: Add framework to allow sending packets with customized CRC.
This is useful for testing RX handling of frames with bad
CRCs.

Requires driver support to actually put the packet on the
wire properly.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24 01:37:35 -08:00
Pavel Emelyanov
ef64a54f6e sock: Introduce the SO_PEEK_OFF sock option
This one specifies where to start MSG_PEEK-ing queue data from. When
set to negative value means that MSG_PEEK works as ususally -- peeks
from the head of the queue always.

When some bytes are peeked from queue and the peeking offset is non
negative it is moved forward so that the next peek will return next
portion of data.

When non-peeking recvmsg occurs and the peeking offset is non negative
is is moved backward so that the next peek will still peek the proper
data (i.e. the one that would have been picked if there were no non
peeking recv in between).

The offset is set using per-proto opteration to let the protocol handle
the locking issues and to check whether the peeking offset feature is
supported by the protocol the socket belongs to.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21 15:03:48 -05:00
H. Peter Anvin
08a655ca7f m68k: Use generic posix_types.h
Change the m68k architecture to use <asm-generic/posix_types.h>.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1328677745-20121-12-git-send-email-hpa@zytor.com
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
2012-02-14 12:01:29 -08:00
Alexander Stein
3372f5a7d0 m68k: Do not set global share for non-kernel shared pages
If the SG bit is set in MMUTR the page is accessible for all
userspace processes (ignoring the ASID). So a process might randomly
access a page from a different process which had a shared page
(from shared memory) in its context.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-02-07 11:25:57 +10:00
Alexander Stein
57e00098cc m68k: Add shared bit to Coldfire kernel page entries
We had problems accessing our NOR flash trough mtd. The system always got
stuck at attaching UBI using ubiattach if booted from NFS or after mounting
squashfs as rootfs directly from NOR flash.
After some testing of the new changes introduced from v3.2-rc1 to v3.2-rc7
we had to apply the following patch to get mtd working again.

[gerg: The problem was ultimately caused by allocated kernel pages not having
the shared (SG) bit set. Without the SG bit set the MMU will look for page
matches incorporating the ASID as well. Things like module regions allocated
using vmalloc would fault when other processes run. ]

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-02-07 11:04:00 +10:00
Greg Ungerer
8b3262c00d m68knommu: fix syscall tracing stuck process
The return path from an exception was checking too many bits in the
thread_info->flags, and getting stuck calling do_signal(). There was
no work to do, we should only be checking the low 8 bits (as per comments
and definitions in arch/m68k/include/asm/thread_info.h).

This fixes the stuck process problem when using strace.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-02-07 11:03:53 +10:00
Linus Torvalds
0dbfe8ddaa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix assembler constraint to prevent overeager gcc optimisation
  mac_esp: rename irq
  mac_scsi: dont enable mac_scsi irq before requesting it
  macfb: fix black and white modes
  m68k/irq: Remove obsolete IRQ_FLG_* definitions

Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-26 12:43:57 -08:00
Dmitry Torokhov
409e15442f Input: q40kbd - convert driver to the split model
Convert the driver to standard spilt model arch-specific code registers
platform device to which driver code can bind later.

Also request IRQ immediately upon binding to the device instead of doing
this when serio port is being opened.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-23 00:02:31 -08:00
Andreas Schwab
2a3535069e m68k: Fix assembler constraint to prevent overeager gcc optimisation
Passing the address of a variable as an operand to an asm statement
doesn't mark the value of this variable as used, so gcc may optimize its
initialisation away.  Fix this by using the "m" constraint instead.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-01-22 14:50:20 +01:00
Geert Uytterhoeven
aa557875cc m68k/irq: Remove obsolete IRQ_FLG_* definitions
The m68k core irq code stopped honoring these flags during the irq
restructuring in 2006.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22 14:50:02 +01:00
Joe Perches
ff2d8b19a3 treewide: convert uses of ATTRIB_NORETURN to __noreturn
Use the more commonly used __noreturn instead of ATTRIB_NORETURN.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Joe Perches
9402c95f34 treewide: remove useless NORET_TYPE macro and uses
It's a very old and now unused prototype marking so just delete it.

Neaten panic pointer argument style to keep checkpatch quiet.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Ben Hutchings
9f13a1fd45 cpu: Register a generic CPU device on architectures that currently do not
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 15:50:11 -08:00
Linus Torvalds
e343a895a9 lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
 so they ended up duplicating pci_iomap from that file.
 That function isn't trivial, and we are going to modify it
 https://lkml.org/lkml/2011/11/14/183
 so the duplication hurts.
 
 This reduces the scope of the problem significantly,
 by moving pci_iomap to a separate file and
 referencing that from all architectures.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPBZXBAAoJECgfDbjSjVRpuuYIAIMD0wE96MuTOSBJX4VG8VAP
 UyjL9dsfMRy8CKioQo5/fxpTY07YBCWmNauSSX7pzgcoUKBfYIGn4Z1qwGYsWK9M
 CzLs6PXLTugw0FtKobHZl/klRTWEBS6YOUjp9x568rplwF+Ppk7b993uj7eS/g+e
 T0mUKzqg4/UavbHd9+W5KgC4drQ5hgtu2WZHoUxBK4umnd3C2G+U82Sthg50o/XU
 SC8IGm39K8I36HoIWgXj3Y7nkOP3mQELohOT4ZPiVSmLvGS4i47+ix75anO+8ZvZ
 jxHr8RC85IK1Nd89NZhbKOyvx0QQiwoKUZaTwcWXJNSOADzZnM6icdIsodc+Elo=
 =ccQZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
2012-01-10 18:04:27 -08:00
Linus Torvalds
eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Linus Torvalds
972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Linus Torvalds
7affca3537 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07 12:03:30 -08:00
Linus Torvalds
356b95424c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.
2012-01-06 18:28:12 -08:00
Linus Torvalds
c77417132c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (56 commits)
  m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled
  m68k/Kconfig: Separate classic m68k and coldfire early
  m68k: add ColdFire with MMU enabled support to the m68k mem init code
  m68k: do not use m68k startup or interrupt code for ColdFire CPUs
  m68k: add ColdFire FPU support for the V4e ColdFire CPUs
  m68k: adjustments to stack frame for ColdFire with MMU enabled
  m68k: use non-MMU linker script for ColdFire MMU builds
  m68k: ColdFire with MMU enabled uses same clocking code as non-MMU
  m68k: add code to setup a ColdFire 54xx platform when MMU enabled
  m68k: use non-MMU entry.S code when compiling for ColdFire CPU
  m68k: create ColdFire MMU pgalloc code
  m68k: compile appropriate mm arch files for ColdFire MMU support
  m68k: ColdFire V4e MMU paging init code and miss handler
  m68k: use ColdFire MMU read/write bit flags when ioremapping
  m68k: modify cache push and clear code for ColdFire with MMU enable
  m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path
  m68k: ColdFire V4e MMU context support code
  m68k: MMU enabled ColdFire needs 8k ELF alignment
  m68k: set ColdFire MMU page size
  m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled
  ...
2012-01-06 17:59:33 -08:00
Linus Torvalds
9753dfe19a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits)
  net: pack skb_shared_info more efficiently
  net_sched: red: split red_parms into parms and vars
  net_sched: sfq: extend limits
  cnic: Improve error recovery on bnx2x devices
  cnic: Re-init dev->stats_addr after chip reset
  net_sched: Bug in netem reordering
  bna: fix sparse warnings/errors
  bna: make ethtool_ops and strings const
  xgmac: cleanups
  net: make ethtool_ops const
  vmxnet3" make ethtool ops const
  xen-netback: make ops structs const
  virtio_net: Pass gfp flags when allocating rx buffers.
  ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call
  netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
  igb: reset PHY after recovering from PHY power down
  igb: add basic runtime PM support
  igb: Add support for byte queue limits.
  e1000: cleanup CE4100 MDIO registers access
  e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove
  ...
2012-01-06 17:22:09 -08:00
Linus Torvalds
376613e81d Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc: Skip TSC synchronization checks for tsc=reliable
  clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz
  clocksource: cris: Convert to clocksource_register_khz
  clocksource: xtensa: Convert to clocksource_register_hz/khz
  clocksource: um: Convert to clocksource_register_hz/khz
  clocksource: parisc: Convert to clocksource_register_hz/khz
  clocksource: m86k: Convert to clocksource_register_hz/khz
  time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from mach_timer.h
  time: x86: Remove CLOCK_TICK_RATE from tsc code
  time: Fix spelling mistakes in new comments
  time: fix bogus comment in timekeeping_get_ns_raw
2012-01-06 13:57:44 -08:00
Greg Kroah-Hartman
ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Geert Uytterhoeven
3bd9e50b42 m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
mac_heartbeat() was never really implemented.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-01-04 22:23:50 +01:00
Al Viro
84dfa9897e consolidate a bunch of ipcbuf.h instances
... some still remain weird :-/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:18 -05:00
Al Viro
0583fcc96b consolidate umode_t declarations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:17 -05:00
Greg Ungerer
1f7034b961 m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled
The ColdFire 547x and 548x CPUs have internal MMU hardware. All code
to support this is now in, so we can build kernels with it enabled.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:50 +10:00
Geert Uytterhoeven
ad8f955daf m68k/Kconfig: Separate classic m68k and coldfire early
While you can build multiplatform kernels for machines with classic
m68k processors, you cannot mix support for classic m68k and coldfire
processors. To avoid such hybrid kernels, introduce CONFIG_M68KCLASSIC
as an antipole for CONFIG_COLDFIRE, and make all specific processor
support depend on one of them.
All classic m68k machine support also needs to depend on this.

The defaults (CONFIG_M68KCLASSIC if MMU, CONFIG_COLDFIRE if !MMU) are
chosen such to make most of the existing configs build and work.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-30 10:20:49 +10:00
Greg Ungerer
fbe3364ac4 m68k: add ColdFire with MMU enabled support to the m68k mem init code
The ColdFire has similar setup requirements to the SUN3 code, so we
use that.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:48 +10:00
Greg Ungerer
3f0060b0e8 m68k: do not use m68k startup or interrupt code for ColdFire CPUs
The ColdFire CPUs have their own startup and interrupt code (in the
platform/coldfire directory), and do not use the general m68k startup and
interrupt code. In fact the use of the arch/m68k/kernel/head.o is not about
CONFIG_MMU or not, it is really about the machine type we are compiling for.

Modify the selection and use of head.o to be based on the machine type.
Only select the local ints.o and vectors.o code if we are using the classic
68k CPU types (that use the conventional Morotola MMU or SUN3 MMU).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:48 +10:00
Greg Ungerer
0a2796da11 m68k: add ColdFire FPU support for the V4e ColdFire CPUs
The V4e ColdFire CPU family also has an integrated FPU (as well as the MMU).
So add code to support this hardware along side the existing m68k FPU code.

The ColdFire FPU is of course different to all previous 68k FP units. It is
close in operation to the 68060, but not completely compatible. The biggest
issue to deal with is that the ColdFire FPU multi-move instructions are
different. It does not support multi-moving the FP control registers, and
the multi-move of the FP data registers uses a different instruction
mnemonic.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:47 +10:00
Greg Ungerer
e9fcffa493 m68k: adjustments to stack frame for ColdFire with MMU enabled
The exception return stack adjustment required by ColdFire when running
with the MMU enabled is not completely identical to 680x0 processors.
Specifically the format type 4 stack frame doesn't need any stack
adjustment on exception return. And the ColdFire always must return with
a frame type of 4, not 0.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:45 +10:00
Greg Ungerer
ed865e31a8 m68k: use non-MMU linker script for ColdFire MMU builds
Use the non-MMU linker script for ColdFire builds when we are building
for MMU enabled. The image layout is correct for loading on existing
ColdFire dev boards. The only addition required to the current non-MMU
linker script is to add support for the fixup section.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:44 +10:00
Greg Ungerer
4a13c6dc64 m68k: ColdFire with MMU enabled uses same clocking code as non-MMU
We want to use the same timer support code for ColdFire CPU's when
running with MMU enabled or not. So use the same time_no.c code even
when the MMU is enabled for ColdFire. This also means we do not want
CONFIG_ARCH_USES_GETTIMEOFFSET set, since that code is only in time_mm.c.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30 10:20:43 +10:00
Greg Ungerer
3731454033 m68k: add code to setup a ColdFire 54xx platform when MMU enabled
We use the same setup code for ColdFire MMU enabled platforms as
standard m68k. So add support for it to setup our 54xx ColdFire
platforms. They do not support the same bootinfo parsing as other
m68k platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:42 +10:00
Greg Ungerer
ef6aa00dc8 m68k: use non-MMU entry.S code when compiling for ColdFire CPU
No matter whether we are configured for non-MMU or MMU enabled if we are
compiling for ColdFire CPU we always use the entry_no.S code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:41 +10:00