Commit Graph

2872 Commits

Author SHA1 Message Date
Thomas Hellstrom
abb295f3b3 vmwgfx: Fix fb VRAM pinning failure due to fragmentation
If the soon-to-be scanout buffer is partly covering the intended
VRAM region, move and pin will fail. In that case, just move it out
to system before attempting to move it in again.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:55 +10:00
Thomas Hellstrom
f1a28ee238 vmwgfx: Remove initialisation of dev::devname
The removed code causes oopses with newer drms on master drop.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:53 +10:00
Thomas Hellstrom
7a1c2f6c8d vmwgfx: Enable use of the vblank system
This is to avoid accessing uninitialized data during
drm_irq_uninstall and vblank ioctls. At the same time, enable error check from
drm_kms_init which previously appeared to ignore all errors.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:51 +10:00
Thomas Hellstrom
30c78bb838 vmwgfx: vt-switch (master drop) fixes
We add an option not to enable fbdev, this option is off (0) by default.
Not enabling fbdev at load time makes it possible to co-operate with
vga16fb and vga text mode when VT switching.

However, if 3D resources are active when VT switching, we're currently
not able to switch over to vga, due to device limitations.
This fixes a bug where we previously lost 3D state during VT switch.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:50 +10:00
Thomas Hellstrom
2854eedae2 drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)"
The mentioned commit breaks the vmwgfx ioctl argument sanity check.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:48 +10:00
Chris Wilson
39b4d07aa3 drm: Hold the mutex when dropping the last GEM reference (v2)
In order to be fully threadsafe we need to check that the drm_gem_object
refcount is still 0 after acquiring the mutex in order to call the free
function. Otherwise, we may encounter scenarios like:

Thread A:                                        Thread B:
drm_gem_close
unreference_unlocked
kref_put                                         mutex_lock
...                                              i915_gem_evict
...                                              kref_get -> BUG
...                                              i915_gem_unbind
...                                              kref_put
...                                              i915_gem_object_free
...                                              mutex_unlock
mutex_lock
i915_gem_object_free -> BUG
i915_gem_object_unbind
kfree
mutex_unlock

Note that no driver is currently using the free_unlocked vfunc and it is
scheduled for removal, hasten that process.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454
Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 21:08:45 +10:00
Dave Airlie
29d08b3efd drm/gem: handlecount isn't really a kref so don't make it one.
There were lots of places being inconsistent since handle count
looked like a kref but it really wasn't.

Fix this my just making handle count an atomic on the object,
and have it increase the normal object kref.

Now i915/radeon/nouveau drivers can drop the normal reference on
userspace object creation, and have the handle hold it.

This patch fixes a memory leak or corruption on unload, because
the driver had no way of knowing if a handle had been actually
added for this object, and the fbcon object needed to know this
to clean itself up properly.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 09:17:44 +10:00
Arnd Bergmann
130b985193 drm: i810/i830: fix locked ioctl variant
The i810 and i830 device drivers may replace their file operations
on an open file descriptor. My previous patch to move the BKL
out of the common DRM code into these drivers only caught the
default file operations, not the ones that actually end up being
used.

Found while trying to come up with a way to kill the BKL for
good in these drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-30 12:45:09 +10:00
Alex Deucher
f36fce0f49 drm/radeon/kms: add quirk for MSI K9A2GM motherboard
Board has no digital connectors

Reported-by: Andy Walls <awalls@md.metrocast.net>
Tested-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28 09:16:13 +10:00
Alex Deucher
e488459a0e drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle
radeon_gem_wait_idle_ioctl can apparently get called prior to
the vram page being set up or even if accel if false, so make
sure it's valid before using it.

Should fix:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636
https://bugs.freedesktop.org/show_bug.cgi?id=29834

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28 09:16:05 +10:00
Chris Wilson
31dfbc9392 drm: Prune GEM vma entries
Hook the GEM vm open/close ops into the generic drm vm open/close so
that the private vma entries are created and destroy appropriately.
Fixes the leak of the drm_vma_entries during the lifetime of the filp.

Reported-by: Matt Mackall <mpm@selenic.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28 09:14:34 +10:00
Alex Deucher
73758a5d51 drm/radeon/kms: fix up encoder info messages for DFP6
encoder info was not printed properly on boards using the
DFP6 id.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-27 09:22:23 +10:00
Daniel J Blueman
201ba4c432 vgaarb: trivial fix
Correct function being needlessly visible outside compilation unit
when the only users are internal.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:13:44 +10:00
Daniel J Blueman
4417d7f602 drm: radeon cleanup fixes...
Fix string interpreted as trigraph and typo.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:12:49 +10:00
Daniel J Blueman
d3147e86d7 drm: fix trivial coding errors
Correct function storage class, and correct assignment type.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:10:23 +10:00
Daniel J Blueman
0e57a3cc71 drm: ttm sparse fixes.
Correct allocation flags type and function prototype for ANSI C compliance.

[airlied: whitespace fixed]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:09:08 +10:00
Ben Skeggs
a5d60827a6 drm/nouveau: fix panels using straps-based mode detection
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:05:28 +10:00
Francisco Jerez
0fbecd400d drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer.
It makes sense for a BO to move after a process has requested
exclusive RW access on it (e.g. because the BO used to be located in
unmappable VRAM and we intercepted the CPU access from the fault
handler).

If we let the ghost object inherit cpu_writers from the original
object, ttm_bo_release_list() will raise a kernel BUG when the ghost
object is destroyed. This can be reproduced with the nouveau driver on
nv5x.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-22 12:40:38 +10:00
Dave Airlie
5222454cf9 drm/radeon: don't allow device to be opened if powered down
If the switcheroo has switched the device off, don't let X open it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-22 12:32:46 +10:00
Chris Wilson
db8c076b92 Merge remote branch 'linus' into drm-intel-fixes 2010-09-21 09:14:55 +01:00
Chris Wilson
af62610313 drm/i915: Hold a reference to the object whilst unbinding the eviction list
During heavy aperture thrashing we may be forced to wait upon several active
objects during eviction. The active list may be the last reference to
these objects and so the action of waiting upon one of them may cause
another to be freed (and itself unbound). To prevent the object
disappearing underneath us, we need to acquire and hold a reference
whilst unbinding.

This should fix the reported page refcount OOPS:

kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444!
...
RIP: 0010:[<ffffffffa0093026>]  [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915]
Call Trace:
 [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915]
 [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915]
 [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm]
 [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915]
 [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915]
 [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm]
 [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915]

Reported-by: Shawn Starr <shawn.starr@rogers.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-20 20:50:00 +01:00
Chris Wilson
41a5142891 drm/i915,agp/intel: Add second set of PCI-IDs for B43
There is a second revision of B43 (a desktop gen4 part) floating around,
functionally equivalent to the original B43, so simply add the new
PCI-IDs.

Bugzilla: https://bugs.freedesktop.org/show_bugs.cgi?id=30221
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2010-09-17 08:22:30 +01:00
Chris Wilson
e259befd90 drm/i915: Fix Sandybridge fence registers
With 5 places to update when adding handling for fence registers, it is
easy to overlook one or two. Correct that oversight, but fence
management should be improved before a new set of registers is added.

Bugzilla: https://bugs.freedesktop.org/show_bug?id=30199
Original patch by: Yuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2010-09-17 08:18:30 +01:00
Chris Wilson
79077319d7 drm/i915/crt: Downgrade warnings for hotplug failures
These are not fatal errors, so do not alarm the user by filling the
logs with *** ERROR ***. Especially as we know that g4x CRT detection
is a little sticky.

On the one hand the errors are valid since they are warning us of a
stall -- we poll the register whilst holding the mode lock so not even
the mouse will update. On the other hand, those stalls were already present
yet nobody complained.

Reported-by: Andi Kleen <andi@firstfloor.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18332
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-17 08:05:28 +01:00
Alex Deucher
fe725d4f22 drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2)
The texture base address registers are in units of 256 bytes.
The original CS checker treated these offsets as bytes, so the
original check was wrong.  I fixed the units in a patch during
the 2.6.36 cycle, but this ended up breaking some existing
userspace (probably due to a bug in either userspace texture allocation
or the drm texture mipmap checker).  So for now, until we come
up with a better fix, just warn if the mipmap size it too large.
This will keep existing userspace working and it should be just
as safe as before when we were checking the wrong units.  These
are GPU MC addresses, so if they fall outside of the VRAM or
GART apertures, they end up at the GPU default page, so this should
be safe from a security perspective.

v2: Just disable the warning.  It just spams the log and there's
nothing the user can do about it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-15 11:13:09 +10:00
Alex Deucher
f90087eea4 drm/radeon/kms: force legacy pll algo for RV620 LVDS
There has been periodic evidence that LVDS, on at least some
panels, prefers the dividers selected by the legacy pll algo.
This patch forces the use of the legacy pll algo on RV620
LVDS panels.  The old behavior (new pll algo) can be selected
by setting the new_pll module parameter to 1.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30029

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14 20:56:06 +10:00
Dave Airlie
b64c115eb2 drm: fix race between driver loading and userspace open.
Not 100% sure this is due to BKL removal, its most likely a combination
of that + userspace timing changes in udev/plymouth. The drm adds the sysfs
device before the driver has completed internal loading, this causes udev
to make the node and plymouth to open it before we've completed loading.

The proper solution is to delay the sysfs manipulation until later in loading
however this causes knock on issues with sysfs connector nodes, so we can use
the global mutex to serialise loading and userspace opens.

Reported-by: Toni Spets (hifi on #radeon)
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14 20:39:04 +10:00
Chris Wilson
930a9e2835 drm: Use a nondestructive mode for output detect when polling (v2)
v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14 20:38:48 +10:00
Marek Olšák
a41ceb1c17 drm/radeon/kms: fix the colorbuffer CS checker for r300-r500
This commit fixes bogus CS rejection if it contains a sequence
of the following operations:

- Set the color buffer 0. track->cb[i].robj becomes non-NULL.
- Render.
- Set a larger zbuffer than the previously-set color buffer.
- Set a larger scissor area as well.
- Set the color channel mask to 0 to do depth-only rendering.
- Render. --> rejected, because track->cb[i].robj remained non-NULL,
  therefore the conditional checking for the color channel mask and
  friends is not performed, and the larger scissor area causes
  the rejection.

This fixes bugs:
- https://bugs.freedesktop.org/show_bug.cgi?id=29762
- https://bugs.freedesktop.org/show_bug.cgi?id=28869
And maybe some others which seem to look the same.

If possible, this commit should go to stable as well.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:30:18 +10:00
Marek Olšák
ec00efb72f drm/radeon/kms: increase lockup detection interval to 10 sec for r100-r500
One subtest of mesa/demos/gltestperf takes 9 seconds to complete,
so to prevent an unnecessary gpu reset followed by a hardlock, I am
increasing the interval to 10 seconds after which a GPU is considered
in a locked-up state. This is on RV530. However, with a little slower GPU,
we would surpass the interval easily, so this is not a good fix
for gltestperf.

Nevertheless, this commit also fixes hardlocks in the applications which
render at speed of less than 1 frame per second, where the whole frame
consists of only one command stream. The game Tiny & Big is an example.
This bar is now lowered to 0.1 fps.

Now the question comes down to whether we should (often unsuccessfully)
reset the GPU at all? Once we have stable enough drivers, we won't have to.
Has the time come already?

If possible, this commit should go to stable as well.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:30:02 +10:00
Alex Deucher
b741be82cf drm/radeon/kms/evergreen: fix backend setup
This patch fixes rendering errors on some evergreen boards.
Hardcoding the backend map is not an optimal solution, but
a better fix is being worked on.

Similar to the fix for rv740
(6271901d82).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29986

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:29:38 +10:00
Chris Wilson
7b334fcb45 drm: Use a nondestructive mode for output detect when polling
Destructive load-detection is very expensive and due to failings
elsewhere can trigger system wide stalls of up to 600ms. A simple
first step to correcting this is not to invoke such an expensive
and destructive load-detection operation automatically.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:29:11 +10:00
Alex Deucher
27849044ca drm/radeon: add some missing copyright headers
Noticed while adding evergreen blit support.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:26:04 +10:00
Chris Wilson
356ad3cd61 drm: Only decouple the old_fb from the crtc is we call mode_set*
Otherwise when disabling the output we switch to the new fb (which is
likely NULL) and skip the call to mode_set -- leaking driver private
state on the old_fb.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:25:46 +10:00
Alex Deucher
e6db0da02e drm/radeon/kms: don't enable underscan with interlaced modes
They aren't compatible.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:25:24 +10:00
Alex Deucher
aa74fbb4c9 drm/radeon/kms: add connector table for Mac x800
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28671

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:21:16 +10:00
Alex Deucher
ff32a59dae drm/radeon/kms: fix regression in RMX code (v2)
caused by d65d65b175

need to update the radeon crtc priv native mode before using it.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30049

v2: integrate v/h copy paste typo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:21:14 +10:00
Chris Wilson
551402a30e drm: Fix regression in disable polling e58f637
I broke out my trusty i845 and found a new boot failure, which upon
inspection turned out to be a recursion within:

drm_helper_probe_single_connector_modes() -> drm_helper_hpd_irq_event()
-> intel_crt_detect() -> drm_helper_probe_single_connector_modes()

Calling drm_kms_helper_poll_enable() instead performs the desired
re-initialisation of the polling should the user have toggled the
parameter, without the recursive side-effect.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:21:12 +10:00
Chris Wilson
9277bf4b4f Merge remote branch 'linus' into drm-intel-fixes 2010-09-13 01:02:18 +01:00
Chris Wilson
897493504a drm/i915: Ensure that the crtcinfo is populated during mode_fixup()
This should fix the mysterious mode setting failures reported during
boot up and after resume, generally for i8xx class machines.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16478
Reported-and-tested-by: Xavier Chantry <chantry.xavier@gmail.com>
Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29413
Tested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2010-09-12 21:20:41 +01:00
Linus Torvalds
3e6dce76d9 Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: don't enable self-refresh on Ironlake
  drm/i915: Double check that the wait_request is not pending before warning
  Revert "drm/i915: Warn if we run out of FIFO space for a mode"
  Revert "drm/i915: Allow LVDS on pipe A on gen4+"
  Revert "drm/i915: Enable RC6 on Ironlake."
2010-09-10 18:19:43 -07:00
Jesse Barnes
dd8849c8f5 drm/i915: don't enable self-refresh on Ironlake
We don't know how to enable it safely, especially as outputs turn on and
off.  When disabling LP1 we also need to make sure LP2 and 3 are already
disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29173
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29082
Reported-by: Chris Lord <chris@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 15:11:43 +01:00
Chris Wilson
7839d956fc drm/i915: Double check that the wait_request is not pending before warning
If we are busy, then we may have woken up the wait_request handler but
not yet serviced it before the hang check fires. So in hang check,
double check that the i915_gem_do_wait_request() is still pending the
wake-up before declaring all hope lost.

Fixes regression with e78d73b16b.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30073
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09 09:18:00 +01:00
Chris Wilson
c3add4b634 Revert "drm/i915: Warn if we run out of FIFO space for a mode"
This reverts commit b9421ae8f3.

This warning was so prelevant, even for apparently working machines,
that it was just causing fear, anxiety and panic.

The root cause still remains, so we will add some better debugging when
we focus on fixing it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=17021
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 09:22:52 +01:00
Chris Wilson
12e8ba25ef Revert "drm/i915: Allow LVDS on pipe A on gen4+"
This reverts commit 0f3ee801b3.

Enabling LVDS on pipe A was causing excessive wakeups on otherwise idle
systems due to i915 interrupts. So restrict the LVDS to pipe B once more,
whilst the issue is properly diagnosed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16307
Reported-and-tested-by: Enrico Bandiello <enban@postal.uv.es>
Poked-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Adam Jackson <ajax@redhat.com>
Cc: stable@kernel.org
2010-09-08 08:41:37 +01:00
Linus Torvalds
4eab8a5717 Merge branch 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intel
* 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intel: (25 commits)
  intel_agp,i915: Add more sandybridge graphics device ids
  drm/i915: Enable MI_FLUSH on Sandybridge
  agp/intel: Fix cache control for Sandybridge
  agp/intel: use #ifdef idiom for intel-agp.h
  agp/intel: fix physical address mask bits for sandybridge
  drm/i915: Prevent double dpms on
  drm/i915: Avoid use of uninitialised values when disabling panel-fitter
  drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt
  drm/i915: Tightly scope intel_encoder to prevent invalid use
  drm/i915: Allocate the PCI resource for the MCHBAR
  drm/i915/dp: Really try 5 times before giving up.
  drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOS
  drm/i915/dp: Boost timeout for enabling transcoder to 100ms
  drm/i915: Re-use set_base_atomic to share setting of the display registers
  drm/i915: Fix offset page-flips on i965+
  drm/i915: Include a generation number in the device info
  i915: return -EFAULT if copy_to_user fails
  i915: return -EFAULT if copy_to_user fails
  agp/intel: Promote warning about failure to setup flush to error.
  drm/i915: overlay on gen2 can't address above 1G
  ...
2010-09-07 14:00:43 -07:00
Chris Wilson
bc41606aef Revert "drm/i915: Enable RC6 on Ironlake."
This reverts commit ce17178094.

This commit has been independently bisected a few times as being the cause
of a s2ram failure.

Reported-and-tested-by: Kyle McMartin <kyle@mcmartin.ca>
Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org>
Cc: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07 21:55:52 +01:00
Zhenyu Wang
8554048070 intel_agp,i915: Add more sandybridge graphics device ids
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge,
and graphics device ids for server sandybridge. Also rename original
ids string to reflect GT1 version.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07 11:16:44 +01:00
Zhenyu Wang
a69ffdbfcb drm/i915: Enable MI_FLUSH on Sandybridge
MI_FLUSH is being deprecated, but still available on Sandybridge.
Make sure it's enabled as userspace still uses MI_FLUSH.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07 11:16:44 +01:00
Zhenyu Wang
f8f235e5bb agp/intel: Fix cache control for Sandybridge
Sandybridge GTT has new cache control bits in PTE, which controls
graphics page cache in LLC or LLC/MLC, so we need to extend the mask
function to respect the new bits.

And set cache control to always LLC only by default on Gen6.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07 11:16:43 +01:00