Here are some small staging driver fixes for 5.0-rc4.
They resolve some reported bugs and add a new device id for one driver.
Nothing major at all, but all good to have.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr+Xw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMhQCgvyEifc3BlhEp6AJtznXTqgIrBXUAn363S3zJ
k0o8Rr4iONcRwyIbWMn5
=mO7R
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.0-rc4.
They resolve some reported bugs and add a new device id for one
driver. Nothing major at all, but all good to have.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Support cpu access during dma_buf_detach
staging: rtl8723bs: Fix build error with Clang when inlining is disabled
staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
staging: vchiq: Fix local event signalling
Staging: wilc1000: unlock on error in init_chip()
staging: wilc1000: fix memory leak in wilc_add_rx_gtk
staging: wilc1000: fix registration frame size
Here are a number of small tty core and serial driver fixes for 5.0-rc4
to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as he
seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr9zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylgaQCcCpv3UHszx+ZemlyPUB3ZGEa1l48AoLd3VB46
cRO5Cf78Dr/FO73bWjLR
=zjYg
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty core and serial driver fixes for
5.0-rc4 to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as
he seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
tty: Handle problem if line discipline does not have receive_buf
vgacon: unconfuse vc_origin when using soft scrollback
vt: invoke notifier on screen size change
vt: always call notifier with the console lock held
vt: make vt_console_print() compatible with the unicode screen buffer
tty/n_hdlc: fix __might_sleep warning
serial: 8250: Fix serial8250 initialization crash
uart: Fix crash in uart_write and uart_put_char
Here are a number of small USB and PHY driver fixes for 5.0-rc4.
Nothing major at all, just the usual selection of USB gadget bugfixes,
some new USB serial driver ids, some SPDX fixes, and some PHY driver
fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr9Iw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltXACg1ycTrlsIDEtj0fQb0KpgmovzYMEAn02nv62w
+6bHM1m+RZvKw5DnOrKb
=g6YM
-----END PGP SIGNATURE-----
Merge tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 5.0-rc4.
Nothing major at all, just the usual selection of USB gadget bugfixes,
some new USB serial driver ids, some SPDX fixes, and some PHY driver
fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: keyspan_usa: add proper SPDX lines for .h files
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
USB: leds: fix regression in usbport led trigger
usb: chipidea: fix static checker warning for NULL pointer
MAINTAINERS: email address update in MAINTAINERS entries
USB: usbip: delete README file
USB: serial: pl2303: add new PID to support PL2303TB
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
phy: ath79-usb: Fix the main reset name to match the DT binding
phy: ath79-usb: Fix the power on error path
phy: fix build breakage: add PHY_MODE_SATA
phy: ti: ensure priv is not null before dereferencing it
USB: serial: ftdi_sio: fix GPIO not working in autosuspend
usb: gadget: Potential NULL dereference on allocation error
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
USB: serial: simple: add Motorola Tetra TPG2200 device id
Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: a33b2d0359 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
When the system lirc.h is older than v4.16, you will get errors like:
ir_loopback.c:32:16: error: field ‘proto’ has incomplete type
enum rc_proto proto;
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline. However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline. Fix this by testing the maximum present CPU instead.
Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.
Fixes: d89dffa976 ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
It turns out that libvirt uses 0-vid as a default if no vlan was
set for the guest (which is the case for switchdev mode) and errs
if we disallow that:
error: Failed to start domain vm75
error: Cannot set interface MAC/vlanid to 6a:66:2d:48:92:c2/0 \
for ifname enp59s0f0 vf 0: Operation not supported
So allow this in order not to break existing systems.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Gavi Teitz <gavi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
With VF LAG commit 491c37e49b "net/mlx5e: In case of LAG, one switch
parent id is used for all representors", both uplinks and all the VFs
(on both of them) get the same switchdev id.
This cause the provisioning system method to identify the rep of a given
VF from the parent PF PCI device using switchev id and physical port
name to break, since VFm of PF0 will have the (id, name) as VFm of PF1.
To fix that, we align to use the framework agreed upstream and set by
nfp commit 168c478e10 "nfp: wire get_phys_port_name on representors":
$ cat /sys/class/net/eth4_*/phys_port_name
p0
pf0vf0
pf0vf1
Now, the names will be different, e.g. pf0vf0 vs. pf1vf0.
Fixes: 491c37e49b ("net/mlx5e: In case of LAG, one switch parent id is used for all representors")
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Waleed Musa <waleedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Prior to this patch the driver prohibited spoof checking on invalid MAC.
Now the user can set this configuration if it wishes to.
This is required since libvirt might invalidate the VF Mac by setting it
to zero, while spoofcheck is ON.
Fixes: 1ab2068a4c ("net/mlx5: Implement vports admin state backup/restore")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The lock in qp_table might be taken from process context or from
interrupt context. This may lead to a deadlock unless it is taken with
IRQs disabled.
Discovered by lockdep
================================
WARNING: inconsistent lock state
4.20.0-rc6
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W}
python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes:
00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core]
{HARDIRQ-ON-W} state was registered at:
_raw_spin_lock+0x33/0x70
mlx5_get_rsc+0x1a/0x50 [mlx5_core]
mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib]
process_one_work+0x90c/0x1820
worker_thread+0x87/0xbb0
kthread+0x320/0x3e0
ret_from_fork+0x24/0x30
irq event stamp: 103928
hardirqs last enabled at (103927): [] nk+0x1a/0x1c
hardirqs last disabled at (103928): [] unk+0x1a/0x1c
softirqs last enabled at (103924): [] tcp_sendmsg+0x31/0x40
softirqs last disabled at (103922): [] 80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&table->lock)->rlock#2);
lock(&(&table->lock)->rlock#2);
*** DEADLOCK ***
Fixes: 032080ab43 ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
MLX5E_PFLAG_* definitions were changed from bitmask to enumerated
values. However, in mlx5e_open_rq(), the proper API (MLX5E_GET_PFLAG macro)
was not used to read the flag value of MLX5E_PFLAG_RX_NO_CSUM_COMPLETE.
Fixed it.
Fixes: 8ff57c18e9 ("net/mlx5e: Improve ethtool private-flags code structure")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This reverts commit 5f5991f36d.
With the original commit, eswitch instance will not be initialized for
a function which is vport group manager but not eswitch manager such as
host PF on SmartNIC (BlueField) card. This will result in a kernel crash
when such a vport group manager is trying to access vports in its group.
E.g, PF vport manager (not eswitch manager) tries to configure the MAC
of its VF vport, a kernel trace will happen similar as bellow:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:mlx5_eswitch_get_vport_config+0xc/0x180 [mlx5_core]
...
Fixes: 5f5991f36d ("net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reported-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The following BUG was reported by kasan:
BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020
Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib]
Call Trace:
dump_stack+0x9a/0xeb
print_address_description+0xe3/0x2e0
kasan_report+0x18a/0x2e0
? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
memcpy+0x1f/0x50
ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
? kvm_clock_read+0x1f/0x30
? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib]
? __lock_is_held+0xc2/0x170
? process_one_work+0x880/0x1960
? process_one_work+0x912/0x1960
process_one_work+0x912/0x1960
? wq_pool_ids_show+0x310/0x310
? lock_acquire+0x145/0x440
worker_thread+0x87/0xbb0
? process_one_work+0x1960/0x1960
kthread+0x314/0x3d0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
Allocated by task 0:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x168/0x3e0
path_rec_create+0xa2/0x1f0 [ib_ipoib]
ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib]
dev_hard_start_xmit+0x159/0x8d0
sch_direct_xmit+0x226/0xb40
__dev_queue_xmit+0x1d63/0x2950
neigh_update+0x889/0x1770
arp_process+0xc47/0x21f0
arp_rcv+0x462/0x760
__netif_receive_skb_core+0x1546/0x2da0
netif_receive_skb_internal+0xf2/0x590
napi_gro_receive+0x28e/0x390
ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib]
ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib]
net_rx_action+0x427/0xe30
__do_softirq+0x28e/0xc42
Freed by task 26680:
__kasan_slab_free+0x11d/0x160
kfree+0xf5/0x360
ipoib_flush_paths+0x532/0x9d0 [ib_ipoib]
ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib]
set_mode+0xc8/0x150 [ib_ipoib]
kernfs_fop_write+0x279/0x440
__vfs_write+0xd8/0x5c0
vfs_write+0x15e/0x470
ksys_write+0xb8/0x180
do_syscall_64+0x9b/0x420
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88034c30bcc8
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff88034c30bcc8, ffff88034c30bec8)
The buggy address belongs to the page:
The following race between change mode and xmit flow is the reason for
this use-after-free:
Change mode Send packet 1 to GID XX Send packet 2 to GID XX
| | |
start | |
| | |
| | |
| Create new path for GID XX |
| and update neigh path |
| | |
| | |
| | |
flush_paths | |
| |
queue_work(cm.start_task) |
| Path for GID XX not found
| create new path
|
|
start_task runs with old
released path
There is no locking to protect the lifetime of the path through the
ipoib_cm_tx struct, so delete it entirely and always use the newly looked
up path under the priv->lock.
Fixes: 546481c281 ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* avoid trying to operate TDLS when not connection,
this is not valid and led to issues
* count TTL-dropped frames in mesh better
* deal with new WiGig channels in regulatory code
* remove a WARN_ON() that can trigger due to benign
races during device/driver registration
* fix nested netlink policy maxattrs (syzkaller)
* fix hwsim n_limits (syzkaller)
* propagate __aligned(2) to a surrounding struct
* return proper error in virt_wifi error path
-----BEGIN PGP SIGNATURE-----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=uCO9
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few small fixes:
* avoid trying to operate TDLS when not connection,
this is not valid and led to issues
* count TTL-dropped frames in mesh better
* deal with new WiGig channels in regulatory code
* remove a WARN_ON() that can trigger due to benign
races during device/driver registration
* fix nested netlink policy maxattrs (syzkaller)
* fix hwsim n_limits (syzkaller)
* propagate __aligned(2) to a surrounding struct
* return proper error in virt_wifi error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention of the flow_is_supported was to disable the entire tree and
methods that allow raw flow creation, but the grammar syntax has this
disable the entire UVERBS_FLOW object. Since the method requires a
MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is
automatically disabled when matchers are disabled.
This restores the ability to create flow steering rules on representors
via regular verbs.
Fixes: a1462351b5 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The async_file might be freed before the disassociation has been ended,
causing qp shutdown to use after free on it.
Since uverbs_destroy_ufile_hw is not a fence, it returns if a
disassociation is ongoing in another thread. It has to be written this way
to avoid deadlock. However this means that the ufile FD close cannot
destroy anything that may still be used by an active kref, such as the the
async_file.
To fix that move the kref_put() to be in ib_uverbs_release_file().
BUG: unable to handle kernel paging request at ffffffffba682787
PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061
Oops: 0003 [#1] SMP PTI
CPU: 1 PID: 32410 Comm: bash Tainted: G OE 4.20.0-rc6+ #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0
Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d
ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85
d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83
RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006
RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001
RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787
RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294
R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00
FS: 00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0
Call Trace:
_raw_spin_lock_irq+0x27/0x30
ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs]
uverbs_free_qp+0x7e/0x90 [ib_uverbs]
destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
__uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs]
uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs]
ib_uverbs_remove_one+0xea/0x240 [ib_uverbs]
ib_unregister_device+0xfb/0x200 [ib_core]
mlx5_ib_remove+0x51/0xe0 [mlx5_ib]
mlx5_remove_device+0xc1/0xd0 [mlx5_core]
mlx5_unregister_device+0x3d/0xb0 [mlx5_core]
remove_one+0x2a/0x90 [mlx5_core]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x16d/0x240
unbind_store+0xb2/0x100
kernfs_fop_write+0x102/0x180
__vfs_write+0x36/0x1a0
? __alloc_fd+0xa9/0x170
? set_close_on_exec+0x49/0x70
vfs_write+0xad/0x1a0
ksys_write+0x52/0xc0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fac551aac60
Cc: <stable@vger.kernel.org> # 4.2
Fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This ratio is the most used among all other architectures and make
icache_hygiene libhugetlbfs test pass: this test mmap lots of
hugepages whose addresses, without this patch, reach the end of
the process user address space.
Signed-off-by: Alexandre Ghiti <aghiti@upmem.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
When the trigger=off is passed for a PCM OSS stream, it sets the
start_threshold of the given substream to the boundary size, so that
it won't be automatically started. This can be problematic for a
capture stream, unfortunately, as detected by syzkaller. The scenario
is like the following:
- In __snd_pcm_lib_xfer() that is invoked from snd_pcm_oss_read()
loop, we have a check whether the stream was already started or the
stream can be auto-started.
- The function at this check returns 0 with trigger=off since we
explicitly disable the auto-start.
- The loop continues and repeats calling __snd_pcm_lib_xfer() tightly,
which may lead to an RCU stall.
This patch fixes the bug by simply allowing the wait for non-started
stream in the case of OSS capture. For native usages, it's supposed
to be done by the caller side (which is user-space), hence it returns
zero like before.
(In theory, __snd_pcm_lib_xfer() could wait even for the native API
usage cases, too; but I'd like to stay in a safer side for not
breaking the existing stuff for now.)
Reported-by: syzbot+fbe0496f92a0ce7b786c@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit')
in order to enable Native DSD support.
[ NOTE: this could be handled in the generic way with fp->dvd_raw if
we add 0x10cb to the vendor whitelist, but since 0x10cb shows a
different vendor name (Erantech), put to the individual entry at
this time -- tiwai ]
Signed-off-by: Olek Poplavsky <woodenbits@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/kvm/lapic.c:1037:27: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/lapic.c:1876:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/hyperv.c:1637:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/svm.c:4396:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/mmu.c:4372:36: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:3835:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:7938:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:2015:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:1773:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
The reason of having -I. here is to make the incorrectly set
TRACE_INCLUDE_PATH working.
As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h
Fix the TRACE_INCLUDE_PATH, and remove the iffy include paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e2e871ab2f ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version()
helper") broke EVMCS enablement: to set vmcs_version we now call
nested_get_evmcs_version() but this function checks
enlightened_vmcs_enabled flag which is not yet set so we end up returning
zero.
Fix the issue by re-arranging things in nested_enable_evmcs().
Fixes: e2e871ab2f ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version() helper")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
...along with the function's STACK_FRAME_NON_STANDARD tag. Moving the
asm blob results in a significantly smaller amount of code that is
marked with STACK_FRAME_NON_STANDARD, which makes it far less likely
that gcc will split the function and trigger a spurious objtool warning.
As a bonus, removing STACK_FRAME_NON_STANDARD from vmx_vcpu_run() allows
the bulk of code to be properly checked by objtool.
Because %rbp is not loaded via VMCS fields, vmx_vcpu_run() must manually
save/restore the host's RBP and load the guest's RBP prior to calling
vmx_vmenter(). Modifying %rbp triggers objtool's stack validation code,
and so vmx_vcpu_run() is tagged with STACK_FRAME_NON_STANDARD since it's
impossible to avoid modifying %rbp.
Unfortunately, vmx_vcpu_run() is also a gigantic function that gcc will
split into separate functions, e.g. so that pieces of the function can
be inlined. Splitting the function means that the compiled Elf file
will contain one or more vmx_vcpu_run.part.* functions in addition to
a vmx_vcpu_run function. Depending on where the function is split,
objtool may warn about a "call without frame pointer save/setup" in
vmx_vcpu_run.part.* since objtool's stack validation looks for exact
names when whitelisting functions tagged with STACK_FRAME_NON_STANDARD.
Up until recently, the undesirable function splitting was effectively
blocked because vmx_vcpu_run() was tagged with __noclone. At the time,
__noclone had an unintended side effect that put vmx_vcpu_run() into a
separate optimization unit, which in turn prevented gcc from inlining
the function (or any of its own function calls) and thus eliminated gcc's
motivation to split the function. Removing the __noclone attribute
allowed gcc to optimize vmx_vcpu_run(), exposing the objtool warning.
Kudos to Qian Cai for root causing that the fnsplit optimization is what
caused objtool to complain.
Fixes: 453eafbe65 ("KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines")
Tested-by: Qian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We get some warnings when building kernel with W=1:
arch/x86/kvm/vmx/vmx.c:426:5: warning: no previous prototype for ‘kvm_fill_hv_flush_list_func’ [-Wmissing-prototypes]
arch/x86/kvm/vmx/nested.c:58:6: warning: no previous prototype for ‘init_vmcs_shadow_fields’ [-Wmissing-prototypes]
Make them static to fix this.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d579997 ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.
Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print warning message when IPI target ID is invalid due to one of
the following reasons:
* In logical mode: cluster > max_cluster (64)
* In physical mode: target > max_physical (512)
* Address is not present in the physical or logical ID tables
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM hypercalls return a negative value error code in case of a fatal
error, e.g. when the hypercall isn't supported or was made with invalid
parameters. WARN_ONCE on fatal errors when sending PV IPIs as any such
error all but guarantees an SMP system will hang due to a missing IPI.
Fixes: aaffcfd1e8 ("KVM: X86: Implement PV IPIs in linux guest")
Cc: stable@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recognition of the KVM_HC_SEND_IPI hypercall was unintentionally
wrapped in "#ifdef CONFIG_X86_64", causing 32-bit KVM hosts to reject
any and all PV IPI requests despite advertising the feature. This
results in all KVM paravirtualized guests hanging during SMP boot due
to IPIs never being delivered.
Fixes: 4180bf1b65 ("KVM: X86: Implement "send IPI" hypercall")
Cc: stable@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We shouldn't probably be suggesting using Enlightened VMCS when it's not
enabled (not supported from guest's point of view). Hyper-V on KVM seems
to be fine either way but let's be consistent.
Fixes: 2bc39970e9 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
System reset through synthetic MSR is not recommended neither by genuine
Hyper-V nor my QEMU.
Fixes: 2bc39970e9 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This changes the allocation of cached_vmcs12 to use kzalloc instead of
kmalloc. This removes the information leak found by Syzkaller (see
Reported-by) in this case and prevents similar leaks from happening
based on cached_vmcs12.
It also changes vmx_get_nested_state to copy out the full 4k VMCS12_SIZE
in copy_to_user rather than only the size of the struct.
Tested: rebuilt against head, booted, and ran the syszkaller repro
https://syzkaller.appspot.com/text?tag=ReproC&x=174efca3400000 without
observing any problems.
Reported-by: syzbot+ded1696f6b50b615b630@syzkaller.appspotmail.com
Fixes: 8fcc4b5923
Cc: stable@vger.kernel.org
Signed-off-by: Tom Roeder <tmroeder@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a recently introduced bug that results in the wrong VMCS control
field being updated when applying a IA32_PERF_GLOBAL_CTRL errata.
Fixes: c73da3fcab ("KVM: VMX: Properly handle dynamic VM Entry/Exit controls")
Reported-by: Harald Arnesen <harald@skogtun.org>
Tested-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The single-step debugging of KVM guests on x86 is broken: if we run
gdb 'stepi' command at the breakpoint when the guest interrupts are
enabled, RIP always jumps to native_apic_mem_write(). Then other
nasty effects follow.
Long investigation showed that on Jun 7, 2017 the
commit c8401dda2f ("KVM: x86: fix singlestepping over syscall")
introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can
be called without X86_EFLAGS_TF set.
Let's fix it. Please consider that for -stable.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Cc: stable@vger.kernel.org
Fixes: c8401dda2f ("KVM: x86: fix singlestepping over syscall")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HV_X64_MSR_GUEST_IDLE_AVAILABLE appeared in kvm_vcpu_ioctl_get_hv_cpuid()
by mistake: it announces support for HV_X64_MSR_GUEST_IDLE (0x400000F0)
which we don't support in KVM (yet).
Fixes: 2bc39970e9 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In process_response_list() invoke the callback handler after unmapping
the DMA buffers. It ensures DMA data is synced form device to cpu
before the client code access the data from callback handler.
Fixes: c9613335bf ("crypto: cavium/nitrox - Added AEAD cipher support")
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there are simulatenous queries of regdb, then there might be a case
where multiple queries can trigger request_firmware_no_wait and can have
parallel callbacks being executed asynchronously. In this scenario we
might hit the WARN_ON.
So remove the warn_on, as the code already handles multiple callbacks
gracefully.
Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During refactor in commit 9e478066ea ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:
struct {
struct ieee80211_hdr_3addr hdr;
u8 category;
u8 action_code;
} __packed action;
But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[ETH_ALEN];
} __packed __aligned(2);
Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.
This removes the following warning (W=1):
net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]
Cc: Johannes Berg <johannes.berg@intel.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
syzbot reported an out-of-bounds read when passing certain
malformed messages into nl80211. The specific place where
this happened isn't interesting, the problem is that nested
policy parsing was referring to the wrong maximum attribute
and thus the policy wasn't long enough.
Fix this by referring to the correct attribute. Since this
is really not necessary, I'll come up with a separate patch
to just pass the policy instead of both, in the common case
we can infer the maxattr from the size of the policy array.
Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we failed to retrieve the i3c dev, we should detach the i3c dev
I.E i3c_master_detach_i3c_dev().
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <zhang.run@zte.com.cn>
Reviewed-by: Yang Wei <yang.wei9@zte.com.cn>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
