Commit Graph

231103 Commits

Author SHA1 Message Date
David Howells
b650c858c2 autofs4: Merge the remaining dentry ops tables
Merge the remaining autofs4 dentry ops tables.  It doesn't matter if
d_automount and d_manage are present on something that's not mountable or
holdable as these ops are only used if the appropriate flags are set in
dentry->d_flags.

[AV] switch to ->s_d_op, since now _everything_ on autofs4 is using the
same dentry_operations.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:49 -05:00
David Howells
ea5b778a8b Unexport do_add_mount() and add in follow_automount(), not ->d_automount()
Unexport do_add_mount() and make ->d_automount() return the vfsmount to be
added rather than calling do_add_mount() itself.  follow_automount() will then
do the addition.

This slightly complicates things as ->d_automount() normally wants to add the
new vfsmount to an expiration list and start an expiration timer.  The problem
with that is that the vfsmount will be deleted if it has a refcount of 1 and
the timer will not repeat if the expiration list is empty.

To this end, we require the vfsmount to be returned from d_automount() with a
refcount of (at least) 2.  One of these refs will be dropped unconditionally.
In addition, follow_automount() must get a 3rd ref around the call to
do_add_mount() lest it eat a ref and return an error, leaving the mount we
have open to being expired as we would otherwise have only 1 ref on it.

d_automount() should also add the the vfsmount to the expiration list (by
calling mnt_set_expiry()) and start the expiration timer before returning, if
this mechanism is to be used.  The vfsmount will be unlinked from the
expiration list by follow_automount() if do_add_mount() fails.

This patch also fixes the call to do_add_mount() for AFS to propagate the mount
flags from the parent vfsmount.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:48 -05:00
David Howells
ab90911ff9 Allow d_manage() to be used in RCU-walk mode
Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well
as when it is in Ref-walk mode.  This permits __follow_mount_rcu() to call
d_manage() directly.  d_manage() needs a parameter to indicate that it is in
RCU-walk mode as it isn't allowed to sleep if in that mode (but should return
-ECHILD instead).

autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon
accesses it and otherwise request dropping back to ref-walk mode.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:47 -05:00
David Howells
87556ef199 Remove a further kludge from __do_follow_link()
Remove a further kludge from __do_follow_link() as it's no longer required with
the automount code.

This reverts the non-helper-function parts of
051d381259, which breaks union mounts.

Reported-by: vaurora@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:46 -05:00
Ian Kent
1972580bb4 autofs4: Bump version
Increase the autofs module sub-version so we can tell what kernel
implementation is being used from user space debug logging.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:45 -05:00
Ian Kent
dd89f90d2d autofs4: Add v4 pseudo direct mount support
Version 4 of autofs provides a pseudo direct mount implementation
that relies on directories at the leaves of a directory tree under
an indirect mount to trigger mounts.

This patch adds support for that functionality.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:44 -05:00
Ian Kent
9e3fea16ba autofs4: Fix wait validation
It is possible for the check in wait.c:validate_request() to return
an incorrect result if the dentry that was mounted upon has changed
during the callback.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:43 -05:00
Ian Kent
6651149371 autofs4: Clean up autofs4_free_ino()
When this function is called the local reference count does't need to
be updated since the dentry is going away and dput definitely must
not be called here.

Also the autofs info struct field inode isn't used so remove it.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:42 -05:00
Ian Kent
71e469db24 autofs4: Clean up dentry operations
There are now two distinct dentry operations uses. One for dentrys
that trigger mounts and one for dentrys that do not.

Rationalize the use of these dentry operations and rename them to
reflect their function.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:41 -05:00
Ian Kent
e61da20a50 autofs4: Clean up inode operations
Since the use of ->follow_link() has been eliminated there is no
need to separate the indirect and direct inode operations.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:40 -05:00
Ian Kent
8c13a676d5 autofs4: Remove unused code
Remove code that is not used due to the use of ->d_automount()
and ->d_manage().

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:39 -05:00
Ian Kent
b5b801779d autofs4: Add d_manage() dentry operation
This patch required a previous patch to add the ->d_automount()
dentry operation.

Add a function to use the newly defined ->d_manage() dentry operation
for blocking during mount and expire.

Whether the VFS calls the dentry operations d_automount() and d_manage()
is controled by the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags. autofs
uses the d_automount() operation to callback to user space to request
mount operations and the d_manage() operation to block walks into mounts
that are under construction or destruction.

In order to prevent these functions from being called unnecessarily the
DMANAGED_* flags are cleared for cases which would cause this. In the
common case the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags are both
set for dentrys waiting to be mounted. The DMANAGED_TRANSIT flag is
cleared upon successful mount request completion and set during expire
runs, both during the dentry expire check, and if selected for expire,
is left set until a subsequent successful mount request completes.

The exception to this is the so-called rootless multi-mount which has
no actual mount at its base. In this case the DMANAGED_AUTOMOUNT flag
is cleared upon successful mount request completion as well and set
again after a successful expire.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:38 -05:00
Ian Kent
10584211e4 autofs4: Add d_automount() dentry operation
Add a function to use the newly defined ->d_automount() dentry operation
for triggering mounts instead of doing the user space callback in ->lookup()
and ->d_revalidate().

Note, to be useful the subsequent patch to add the ->d_manage() dentry
operation is also needed so the discussion of functionality is deferred to
that patch.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:37 -05:00
David Howells
db3729153e Remove the automount through follow_link() kludge code from pathwalk
Remove the automount through follow_link() kludge code from pathwalk in favour
of using d_automount().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:36 -05:00
David Howells
01c64feac4 CIFS: Use d_automount() rather than abusing follow_link()
Make CIFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.

[NOTE: THIS IS UNTESTED!]

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:35 -05:00
David Howells
36d43a4376 NFS: Use d_automount() rather than abusing follow_link()
Make NFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:34 -05:00
David Howells
d18610b0ce AFS: Use d_automount() rather than abusing follow_link()
Make AFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:33 -05:00
David Howells
6f45b65672 Add an AT_NO_AUTOMOUNT flag to suppress terminal automount
Add an AT_NO_AUTOMOUNT flag to suppress terminal automounting of automount
point directories.  This can be used by fstatat() users to permit the
gathering of attributes on an automount point and also prevent
mass-automounting of a directory of automount points by ls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:33 -05:00
David Howells
cc53ce53c8 Add a dentry op to allow processes to be held during pathwalk transit
Add a dentry op (d_manage) to permit a filesystem to hold a process and make it
sleep when it tries to transit away from one of that filesystem's directories
during a pathwalk.  The operation is keyed off a new dentry flag
(DCACHE_MANAGE_TRANSIT).

The filesystem is allowed to be selective about which processes it holds and
which it permits to continue on or prohibits from transiting from each flagged
directory.  This will allow autofs to hold up client processes whilst letting
its userspace daemon through to maintain the directory or the stuff behind it
or mounted upon it.

The ->d_manage() dentry operation:

	int (*d_manage)(struct path *path, bool mounting_here);

takes a pointer to the directory about to be transited away from and a flag
indicating whether the transit is undertaken by do_add_mount() or
do_move_mount() skipping through a pile of filesystems mounted on a mountpoint.

It should return 0 if successful and to let the process continue on its way;
-EISDIR to prohibit the caller from skipping to overmounted filesystems or
automounting, and to use this directory; or some other error code to return to
the user.

->d_manage() is called with namespace_sem writelocked if mounting_here is true
and no other locks held, so it may sleep.  However, if mounting_here is true,
it may not initiate or wait for a mount or unmount upon the parameter
directory, even if the act is actually performed by userspace.

Within fs/namei.c, follow_managed() is extended to check with d_manage() first
on each managed directory, before transiting away from it or attempting to
automount upon it.

follow_down() is renamed follow_down_one() and should only be used where the
filesystem deliberately intends to avoid management steps (e.g. autofs).

A new follow_down() is added that incorporates the loop done by all other
callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS
and CIFS do use it, their use is removed by converting them to use
d_automount()).  The new follow_down() calls d_manage() as appropriate.  It
also takes an extra parameter to indicate if it is being called from mount code
(with namespace_sem writelocked) which it passes to d_manage().  follow_down()
ignores automount points so that it can be used to mount on them.

__follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with
DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to
sleep.  It would be possible to enter d_manage() in rcu-walk mode too, and have
that determine whether to abort or not itself.  That would allow the autofs
daemon to continue on in rcu-walk mode.

Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't
required as every tranist from that directory will cause d_manage() to be
invoked.  It can always be set again when necessary.

==========================
WHAT THIS MEANS FOR AUTOFS
==========================

Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to
trigger the automounting of indirect mounts, and both of these can be called
with i_mutex held.

autofs knows that the i_mutex will be held by the caller in lookup(), and so
can drop it before invoking the daemon - but this isn't so for d_revalidate(),
since the lock is only held on _some_ of the code paths that call it.  This
means that autofs can't risk dropping i_mutex from its d_revalidate() function
before it calls the daemon.

The bug could manifest itself as, for example, a process that's trying to
validate an automount dentry that gets made to wait because that dentry is
expired and needs cleaning up:

	mkdir         S ffffffff8014e05a     0 32580  24956
	Call Trace:
	 [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897
	 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58
	 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e
	 [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b
	 [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149
	 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f
	 [<ffffffff80057a2f>] lookup_create+0x46/0x80
	 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4

versus the automount daemon which wants to remove that dentry, but can't
because the normal process is holding the i_mutex lock:

	automount     D ffffffff8014e05a     0 32581      1              32561
	Call Trace:
	 [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b
	 [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1
	 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14
	 [<ffffffff800e6d55>] do_rmdir+0x77/0xde
	 [<ffffffff8005d229>] tracesys+0x71/0xe0
	 [<ffffffff8005d28d>] tracesys+0xd5/0xe0

which means that the system is deadlocked.

This patch allows autofs to hold up normal processes whilst the daemon goes
ahead and does things to the dentry tree behind the automouter point without
risking a deadlock as almost no locks are held in d_manage() and none in
d_automount().

Signed-off-by: David Howells <dhowells@redhat.com>
Was-Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:07:31 -05:00
David Howells
9875cf8064 Add a dentry op to handle automounting rather than abusing follow_link()
Add a dentry op (d_automount) to handle automounting directories rather than
abusing the follow_link() inode operation.  The operation is keyed off a new
dentry flag (DCACHE_NEED_AUTOMOUNT).

This also makes it easier to add an AT_ flag to suppress terminal segment
automount during pathwalk and removes the need for the kludge code in the
pathwalk algorithm to handle directories with follow_link() semantics.

The ->d_automount() dentry operation:

	struct vfsmount *(*d_automount)(struct path *mountpoint);

takes a pointer to the directory to be mounted upon, which is expected to
provide sufficient data to determine what should be mounted.  If successful, it
should return the vfsmount struct it creates (which it should also have added
to the namespace using do_add_mount() or similar).  If there's a collision with
another automount attempt, NULL should be returned.  If the directory specified
by the parameter should be used directly rather than being mounted upon,
-EISDIR should be returned.  In any other case, an error code should be
returned.

The ->d_automount() operation is called with no locks held and may sleep.  At
this point the pathwalk algorithm will be in ref-walk mode.

Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is
added to handle mountpoints.  It will return -EREMOTE if the automount flag was
set, but no d_automount() op was supplied, -ELOOP if we've encountered too many
symlinks or mountpoints, -EISDIR if the walk point should be used without
mounting and 0 if successful.  The path will be updated to point to the mounted
filesystem if a successful automount took place.

__follow_mount() is replaced by follow_managed() which is more generic
(especially with the patch that adds ->d_manage()).  This handles transits from
directories during pathwalk, including automounting and skipping over
mountpoints (and holding processes with the next patch).

__follow_mount_rcu() will jump out of RCU-walk mode if it encounters an
automount point with nothing mounted on it.

follow_dotdot*() does not handle automounts as you don't want to trigger them
whilst following "..".

I've also extracted the mount/don't-mount logic from autofs4 and included it
here.  It makes the mount go ahead anyway if someone calls open() or creat(),
tries to traverse the directory, tries to chdir/chroot/etc. into the directory,
or sticks a '/' on the end of the pathname.  If they do a stat(), however,
they'll only trigger the automount if they didn't also say O_NOFOLLOW.

I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their
inodes as automount points.  This flag is automatically propagated to the
dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate().  This saves NFS and could
save AFS a private flag bit apiece, but is not strictly necessary.  It would be
preferable to do the propagation in d_set_d_op(), but that doesn't normally
have access to the inode.

[AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu()
succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after
that, rather than just returning with ungrabbed *path]

Signed-off-by: David Howells <dhowells@redhat.com>
Was-Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:05:03 -05:00
Al Viro
1a8edf40e7 do_lookup() fix
do_lookup() has a path leading from LOOKUP_RCU case to non-RCU
crossing of mountpoints, which breaks things badly.  If we
hit need_revalidate: and do nothing in there, we need to come
back into LOOKUP_RCU half of things, not to done: in non-RCU
one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15 20:03:39 -05:00
Linus Torvalds
d73b388459 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
2011-01-14 09:29:05 -08:00
Linus Torvalds
5957e33d6a Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...
2011-01-14 09:25:59 -08:00
Tejun Heo
0ad53eeefc afs: add afs_wq and use it instead of the system workqueue
flush_scheduled_work() is going away.  afs needs to make sure all the
works it has queued have finished before being unloaded and there can
be arbitrary number of pending works.  Add afs_wq and use it as the
flush domain instead of the system workqueue.

Also, convert cancel_delayed_work() + flush_scheduled_work() to
cancel_delayed_work_sync() in afs_mntpt_kill_timer().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 09:25:11 -08:00
Tejun Heo
e1fcc7e2a7 rxrpc: rxrpc_workqueue isn't used during memory reclaim
rxrpc_workqueue isn't depended upon while reclaiming memory.  Convert
to alloc_workqueue() without WQ_MEM_RECLAIM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 09:25:11 -08:00
Akshat Aranya
ba28b93a52 FS-Cache: Fix operation handling
fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.

Signed-off-by: Akshat Aranya <aranya@nec-labs.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 09:23:36 -08:00
Linus Torvalds
acda4721ae Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  kernel: fix hlist_bl again
  cgroups: Fix a lockdep warning at cgroup removal
  fs: namei fix ->put_link on wrong inode in do_filp_open
2011-01-14 09:08:29 -08:00
Linus Torvalds
822e5215f9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  mfd: ab8500-core chip version cut 2.0 support
  mfd: Flag WM831x /IRQ as a wake source
  mfd: Convert WM831x away from legacy I2C PM operations
  regulator: Support MAX8998/LP3974 DVS-GPIO
  mfd: Support LP3974 RTC
  i2c: Convert SCx200 driver from using raw PCI to platform device
  x86: OLPC: convert olpc-xo1 driver from pci device to platform device
  mfd: MAX8998/LP3974 hibernation support
  mfd/ab8500: remove spi support
  mfd: Remove ARCH_U8500 dependency from AB8500
  misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage
  mfd: Add __devexit annotation for vx855_remove
  mfd: twl6030 irq_data conversion.
  gpio: Fix cs5535 printk warnings
  misc: Fix cs5535 printk warnings
  mfd: Convert Wolfson MFD drivers to use irq_data accessor function
  mfd: Convert TWL4030 to new irq_ APIs
  mfd: Convert tps6586x driver to new irq_ API
  mfd: Convert tc6393xb driver to new irq_ APIs
  mfd: Convert t7166xb driver to new irq_ API
  ...
2011-01-14 09:08:00 -08:00
Rafael J. Wysocki
0f953bf6b4 PCI/PM: Report wakeup events before resuming devices
Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Rafael J. Wysocki
b6e335aeeb PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Alex Williamson
ff29530e65 PCI: sysfs: Update ROM to include default owner write access
The PCI sysfs ROM interface requires an enabling write to access the ROM
image, but the default file mode is 0400.  The original proposed patch
adding sysfs ROM support was a true read-only interface, with the
enabling bit coming in as a feature request.  I suspect it was simply an
oversight that the file mode didn't get updated to match the API.

Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:42 -08:00
Bjorn Helgaas
64a5fed666 x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
This functionality is known to be incomplete, so discourage its use in
general-purpose kernels.

The only reason to use this driver is to support PCI hotplug on CNB20LE-
based machines that don't have ACPI, and there are very few such
systems.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:42 -08:00
Bjorn Helgaas
30e664afb5 x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
The broadcom_bus.c quirk was written (without benefit of documentation)
to support PCI hotplug on an old system that doesn't have ACPI.  As
such, we should only use it when the system doesn't have ACPI.

If the system does have ACPI and we need the host bridge description, we
should get it from the ACPI _CRS method.  On machines older than 2008,
we currently ignore _CRS, but that doesn't mean we should use
broadcom_bus.c.  It means we should either (a) do what we've done in the
past and assume everything in the PCI gap is routed to bus 0 (so hotplug
may not work), or (b) arrange to use _CRS.  This patch does (a).

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:41 -08:00
Rafael J. Wysocki
415e12b237 PCI/ACPI: Request _OSC control once for each root bridge (v3)
Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-by: Ozan Caglayan <ozan@pardus.org.tr>
Tested-by: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:41 -08:00
Narendra_K@Dell.com
6e8af08dfa PCI: enable pci=bfsort by default on future Dell systems
This patch enables pci=bfsort by default on future Dell systems.
It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort
accordingly.

Offset  Name    Length  Value   Description

04      Flags0  Word    Varies  Bits 9-10
                                - 10:9 = 00  Unknown
                                - 10:9 = 01  Breadth First
                                - 10:9 = 10  Depth First
                                - 10:9 = 11  Reserved

1. Any time pci=bfsort has to be enabled on a system, we need to add the
   model number of the system to the white list. With this patch, that
   is not required.

2. Typically, model number has to be added to the white list when the
   system is under development. With this change, that is not required.

Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:41 -08:00
Linus Torvalds
c1e0d97d3d Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] MAINTAINERS: Update zcrypt driver entry
  [S390] Randomize PIEs
  [S390] Randomise the brk region
  [S390] Add is_32bit_task() helper function
  [S390] Randomize lower bits of stack address
  [S390] Randomize mmap start address
  [S390] Rearrange mmap.c
  [S390] Enable flexible mmap layout for 64 bit processes
  [S390] vdso: dont map at mmap_base
  [S390] reduce miminum gap between stack and mmap_base
  [S390] mmap: consider stack address randomization
  [S390] Update default configuration
  [S390] cio: path_event overindication after resume
2011-01-14 08:47:26 -08:00
Lennert Buytenhek
7f5db6a802 gpio: timbgpio: Fix up irq_data conversion breakage.
Commit a1f5f22adc ("gpio: timbgpio:
irq_data conversion") was slightly too enthusiastic in converting
timbgpio_irq() over to take an irq_data * argument instead of an
unsigned int irq argument, as it is a flow handler, which still take
IRQ numbers for now.  (And on top of that, it was using the wrong
accessors.)

This fixes it up, and seems to build without warnings.

Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Richard Röjfors <richard.rojfors@mocean-labs.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 08:13:13 -08:00
Al Viro
c72a04e347 cgroup_fs: fix cgroup use of simple_lookup()
cgroup can't use simple_lookup(), since that'd override its desired ->d_op.

Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 08:07:48 -08:00
Wolfram Sang
323b7fe8f8 include/gpio.h: remove remaining __must_check-annotiations
Commit 5f829e405e (gpiolib: add missing functions
to generic fallback) also introduced two.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 08:06:39 -08:00
KAMEZAWA Hiroyuki
836cb711ad Revert update for dirty_ratio for memcg.
The flags added by commit db16d5ec1f
has no user now. We believe we'll use it soon but considering
patch reviewing, the change itself should be folded into incoming
set of "dirty ratio for memcg" patches.

So, it's better to drop this change from current mainline tree.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 07:52:02 -08:00
KAMEZAWA Hiroyuki
11ff26c884 revert documentaion update for memcg's dirty ratio.
Subjct: Revert memory cgroup dirty_ratio Documentation.

The commit ece72400c2 adds documentation
for memcg's dirty ratio. But the function is not implemented yet.
Remove the documentation for avoiding confusing users.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 07:52:02 -08:00
MyungJoo Ham
359ab9f5b1 power_supply: Add MAX17042 Fuel Gauge Driver
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion
betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit
registers. Besides, MAX17042 has much more features than MAX17040; e.g.,
a thermistor, current and current accumulation measurement, battery
internal resistance estimate, average values of measurement, and others.

This patch implements a driver for MAX17042.
In this initial release, we have implemented the most basic features of
a fuel gauge: measure the battery capacity and voltage.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-14 18:11:59 +03:00
Russell King
32385c7cf6 kernel: fix hlist_bl again
__d_rehash is dereferencing an almost-NULL pointer on my ARM926.
CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y.

The faulting instruction is:    strne   r3, [r2, #4]
and as can be seen from the register dump below, r2 is 0x00000001, hence
the faulting 0x00000005 address.

__d_rehash is essentially:

       spin_lock_bucket(b);
       entry->d_flags &= ~DCACHE_UNHASHED;
       hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
       spin_unlock_bucket(b);

which is:

       bit_spin_lock(0, (unsigned long *)&b->head.first);
       entry->d_flags &= ~DCACHE_UNHASHED;
       hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
       __bit_spin_unlock(0, (unsigned long *)&b->head.first);

bit_spin_lock(0, ptr) sets bit 0 of *ptr, in this case b->head.first if
CONFIG_SMP or CONFIG_DEBUG_SPINLOCK is set:

#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
       while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
               while (test_bit(bitnum, addr)) {
                       preempt_enable();
                       cpu_relax();
                       preempt_disable();
               }
       }
#endif

So, b->head.first starts off NULL, and becomes a non-NULL (address 1).
hlist_bl_add_head_rcu() does this:

static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
                                       struct hlist_bl_head *h)
{
       first = hlist_bl_first(h);
       n->next = first;
       if (first)
               first->pprev = &n->next;

It is the store to first->pprev which is faulting.

hlist_bl_first():

static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
{
       return (struct hlist_bl_node *)
               ((unsigned long)h->first & ~LIST_BL_LOCKMASK);
}

but:
#if defined(CONFIG_SMP)
#define LIST_BL_LOCKMASK        1UL
#else
#define LIST_BL_LOCKMASK        0UL
#endif

So, we have one piece of code which sets bit 0 of addresses, and another
bit of code which doesn't clear it before dereferencing the pointer if
!CONFIG_SMP && CONFIG_DEBUG_SPINLOCK.  With the patch below, I can again
sucessfully boot the kernel on my Versatile PB/926 platform.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-14 13:12:45 +00:00
Mattias Wallin
92d50a4132 mfd: ab8500-core chip version cut 2.0 support
This patch adds support for chip version 2.0 or cut 2.0.
One new interrupt latch register - latch 12 - is introduced.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:18 +01:00
Mark Brown
180e4f5f20 mfd: Flag WM831x /IRQ as a wake source
The WM831x can generate wake events, some unconditionally, so flag
the primary IRQ as a wake source in order to help the CPU treat the
/IRQ signal appropriately.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:17 +01:00
Mark Brown
c538ddbe4f mfd: Convert WM831x away from legacy I2C PM operations
Since the legacy bus PM operations are deprecated move the suspend
method over to dev_pm_ops.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:17 +01:00
MyungJoo Ham
735a3d9efd regulator: Support MAX8998/LP3974 DVS-GPIO
The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and
BUCK2-DVS2 modes. This patch adds such modes and an option to block
setting buck1/2 voltages out of the preset values.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:16 +01:00
MyungJoo Ham
337ce5d1c5 mfd: Support LP3974 RTC
The first releases of LP3974 have a large delay in RTC registers,
which requires 2 seconds of delay after writing to a rtc register
(recommended by National Semiconductor's engineers)
before reading it.

If "rtc_delay" field of the platform data is true, the rtc driver
assumes that such delays are required. Although we have not seen
LP3974s without requiring such delays, we assume that such LP3974s
will be released soon (or they have done so already) and they are
supported by "lp3974" without setting "rtc_delay" at the platform
data.

This patch adds delays with msleep when writing values to RTC registers
if the platform data has rtc_delay set.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:16 +01:00
Andres Salomon
de8255ccd2 i2c: Convert SCx200 driver from using raw PCI to platform device
The SCx200 ACB driver supports ISA hardware as well as PCI.  The PCI
hardware is CS5535/CS5536 based, and the device that it grabs is handled by
the cs5535-mfd driver. This converts the SCx200 driver to use a
platform_driver rather than the previous PCI hackery.

The driver used to manually track the iface list (via linked list); now it
only does this for ISA devices.  PCI ifaces are handled through standard
driver model lists.

It's unclear what happens in case of errors in the old ISA code; rather than
pretending the code actually cares, I've dropped the (implicit) ignorance
of return values and marked it with a comment.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:15 +01:00
Andres Salomon
419cdc54ea x86: OLPC: convert olpc-xo1 driver from pci device to platform device
The cs5535-mfd driver now takes care of the PCI BAR handling; this
means the olpc-xo1 driver shouldn't be touching the PCI device at all.

This patch uses both cs5535-acpi and cs5535-pms platform devices rather
than a single platform device because the cs5535-mfd driver may be used
by other CS5535 platform-specific drivers; OLPC doesn't get to dictate
that ACPI and PMS will always be used together.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:15 +01:00