Update CPU overrides for the DEC port with the recent additions, shaving
off some effectively dead code:
text data bss dec hex filename
5586952 233132 5990368 11810452 b43694 vmlinux.32-old
5581248 233140 5990368 11804756 b42054 vmlinux.32-new
text data bss dec hex filename
6036936 356648 10756544 17150128 105b0b0 vmlinux.64-old
6029896 360752 10756544 17147192 105a538 vmlinux.64-new
The data size increase is due to the special alignment requirement of
`init_thread_union' aka `.data..init_task' moving it up to the nearest
page boundary and making the amount of padding at its front rely on how
far within a page text ends.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10197/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Replace an explicit barrier with a useful processor instruction in TLB
invalidation, following several other such cases elsewhere in
`tlb-r3k.c'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10196/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the initialisation of the CP0.Wired register implemented by Toshiba
TX3922 and TX3927 processors from `tx39_cache_init' to `tlb_init' where
it belongs, correcting code structure and making sure initialisation
does not rely on `tx39_cache_init' being called before `tlb_init' to
work correctly.
Make `r3k_have_wired_reg' static as it's no longer externally referred
to; remove a stale declaration too.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10195/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Most R3k processor implementations have their 8 first TLB entries fixed
as wired, so we always skip them in TLB invalidation. That however
means any leftover entries present there at boot will stay throughout
the life of the kernel, unless replaced with new ones.
So rename `local_flush_tlb_all' to `local_flush_tlb_from' and make it
accept the TLB entry to start from. Then use 0 initially at bootstrap,
and the first regular entry later on, bypassing any wired entries.
Wrap the latter arrangement into a new `local_flush_tlb_all' entry
point.
There is no need to disable interrupts in the call made from `tlb_init'
because it's made before the interrupt subsystem has been initialised;
this is also true for secondary processors, should we ever support R3k
SMP. So move this piece of code to new `local_flush_tlb_all'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
XPA extends the physical addresses on MIPS32, including the EntryLo
registers. Update dump_tlb() to concatenate the PFNX field from the high
end of the EntryLo registers (as read by mfhc0).
The width of physical and virtual addresses are also separated to show
only 8 nibbles of virtual but 11 nibbles of physical with XPA.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The RI/XI bits when present are above the PFN field in the EntryLo
registers, at bits 63,62 when read with dmfc0, and bits 31,30 when read
with mfc0. This makes them appear as part of the physical address, since
the other bits are masked with PAGE_MASK, for example:
Index: 253 pgmask=16kb va=77b18000 asid=75
[pa=1000744000 c=5 d=1 v=1 g=0] [pa=100134c000 c=5 d=1 v=1 g=0]
The physical addresses have bit 36 set, which corresponds to bit 30 of
EntryLo1, the XI bit.
Explicitly mask off the RI and XI bits from the printed physical
address, and print the RI and XI bits separately if they exist, giving
output more like this:
Index: 226 pgmask=16kb va=77be0000 asid=79
[ri=0 xi=1 pa=01288000 c=5 d=1 v=1 g=0] [ri=0 xi=0 pa=010e4000 c=5 d=0 v=1 g=0]
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/10080/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The EHINV bit in EntryHi allows a TLB entry to be properly marked
invalid so that EntryHi doesn't have to be set to a unique value to
avoid machine check exceptions due to multiple matching entries.
Unfortunately dump_tlb() doesn't take this into account so it will print
all the uninteresting invalid TLB entries if the current ASID happens to
be 00. Therefore add a condition to skip entries which are marked
invalid with the EHINV bit.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10076/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The TLB only matches the ASID when the global bit isn't set, so
dump_tlb() shouldn't really be skipping global entries just because the
ASID doesn't match. Fix the condition to read the TLB entry's global bit
from EntryLo0. Note that after a TLB read the global bits in both
EntryLo registers reflect the same global bit in the TLB entry.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10079/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make use of recently added EntryLo bit definitions in mipsregs.h when
dumping TLB contents.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10075/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Refactor the TLB matching code in dump_tlb() slightly so that the
conditions which can cause a TLB entry to be skipped can be more easily
extended. This should prevent the match condition getting unwieldy once
it is updated to take further conditions into account.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10081/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the new tlb read hazard macros from <asm/hazards.h> rather than the
local BARRIER() macro which uses 7 ops regardless of the kernel
configuration.
We use mtc0_tlbr_hazard for the hazard between mtc0 to the index
register and the tlbr, and tlb_read_hazard for the hazard between the
tlbr and the mfc0 of the TLB registers written by tlbr.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10074/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add definitions for EntryLo register bits in mipsregs.h. The R4000
compatible ones are prefixed MIPS_ENTRYLO_ and the R3000 compatible ones
are prefixed R3K_ENTRYLO_.
These will be used in later patches.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/10073/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add hazard macros to <asm/hazards.h> for the following hazards around
tlbr (TLB read) instructions, which are used in TLB dumping code and
some KVM TLB management code:
- mtc0_tlbr_hazard
Between mtc0 (Index) and tlbr. This is copied from mtc0_tlbw_hazard in
all cases on the assumption that tlbr always has similar data user
timings to tlbw.
- tlb_read_hazard
Between tlbr and mfc0 (various TLB registers). This is copied from
tlbw_use_hazard in all cases on the assumption that tlbr has similar
data writer characteristics to tlbw, and mfc0 has similar data user
characteristics to loads and stores.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10078/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add a MIPS specific SysRq operation to dump the TLB entries on all CPUs,
using the 'x' trigger key.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10072/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Extra bcma buses may be totally different models, see following dump:
boardtype=0x0646
pci/1/1/boardtype=0x0545
pci/2/1/boardtype=0x62b
We need to detect them properly to allow drivers apply some board
specific hacks.
[ralf@linux-mips.org: folded in Rafal's fix.]
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/10028/
Patchwork: https://patchwork.linux-mips.org/patch/10048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
New devices may have more than 1 Ethernet core (device). We should
extract info about them to make it available to Ethernet drivers.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Ian Kent <raven@themaw.net>
Patchwork: https://patchwork.linux-mips.org/patch/10027/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For years we planned to get rid of old u16 fields, let's start doing it
with MIPS code. This process will take some time, it requires doing the
same in ssb/bcma and then switching all drivers to new fields. This will
be handled in separated patches submitted to appropriate trees.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/10026/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
First of all it shouldn't modify copied NVRAM just to make sure it can
loop over all entries. It's enough to just compare current position
pointer with the end of buffer address.
Secondly buffer is guaranteed to be \0 ended, so we don't need strnchr.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Ian Kent <raven@themaw.net>
Patchwork: https://patchwork.linux-mips.org/patch/10032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All the necessary support code is already there so all that's left is
to enable the feature in kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Due to the slightly odd way that new threads and processes start execution
when scheduled for the very first time they were bypassing the required
disable_msa call.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If CONFIG_SERIAL_8250 is set to m, the Loongson seria.ko module might get
unloaded while the serial driver modules are still loaded resulting in
stale references to the destroyed platform_device instance.
Anyway, platform devices should always be registered indicated what
devices are present, _not_ what drivers have been configured.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Patchwork: https://patchwork.linux-mips.org/patch/10538/
If CONFIG_MTD_PHYSMAP is set to m, the Cobalt mtd.ko module might get
unloaded while the drivers/mtd modules are still loaded resulting in
stale references to the destroyed platform_device instance.
Anyway, platform devices should always be registered indicated what
devices are present, _not_ what drivers have been configured.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit be0c37c985 ("MIPS: Rearrange PTE bits into fixed positions.")
rearranged the PTE bits into fixed positions in preparation for the XPA
support. However, this patch broke R6 since it only took R2 cores
into consideration for the RI/XI bits leading to boot failures. We fix
this by adding the missing CONFIG_CPU_MIPSR6 definitions
Fixes: be0c37c985 ("MIPS: Rearrange PTE bits into fixed positions.")
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10208/
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix stack pointer offset which could potentially corrupt
argument registers in the previous frame. The calculated offset
reflects the size of all the registers we need to preserve so there
is no need for this erroneous subtraction.
[ralf@linux-mips.org: Fixed conflict due to only applying this fix part
of the entire series as part of 4.1 fixes.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
setup_per_cpu_areas() only setup __per_cpu_offset[] for each possible
cpu, but loongson_sysconf.nr_cpus can be greater than possible cpus
(due to reserved_cpus_mask). So in loongson3_ipi_interrupt(), percpu
access will touch the original varible in .data..percpu section which
has been freed. Without this patch, cpu-hotplug will cause memery
corruption.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/10524/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 334c86c494 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 2.6.37+
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the default FCSR value in mask probing, avoiding an FPE exception
where reset has left any exception enable and their corresponding cause
bits set and the register is then rewritten with these bits active.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Due to a typo the illegal access interrupt is never cleared in by
the interupt handler, causing an effective deadlock on the first
illegal access.
This was broken since the code was introduced in 5433acd81e ("MIPS:
ralink: add illegal access driver"), but only exposed when the Kconfig
symbol was added, thus enabling the code.
Cc: <stable@vger.kernel.org> [3.18+]
Fixes: a7b7aad383 ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user()
return value in case of overlong strings.] causing assembler warnings
and broken code generated in __strnlen_kernel_nocheck_asm:
arch/mips/lib/strnlen_user.S: Assembler messages:
arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set, resulting in the function
looping indefinitely upon mounting NFS root.
Use conditional assembly to avoid a microMIPS code size regression.
Using $at unconditionally would cause such a regression as there are no
16-bit instruction encodings available for ALU operations using this
register. Using $v1 unconditionally would produce short microMIPS
encodings, but would prevent this register from being used across calls
to this function.
The extra LI operation introduced is free, replacing a NOP originally
scheduled into the delay slot of the branch that follows.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
bmips_wr_vec() copies exception vector code from start to dst.
The call to dma_cache_wback() needs to flush (end-start) bytes,
starting at dst, from write-back cache to memory.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the generic mechanism to declare a bitmap instead of unsigned long.
This could fix an overwrite defect of whatever follows irq_map.
Not all "#define NR_IRQS <value>" are a multiple of BITS_PER_LONG so
using DECLARE_BITMAP allocates the proper number of longs required
for the possible bits.
For instance:
arch/mips/include/asm/mach-ath79/irq.h:#define NR_IRQS 51
arch/mips/include/asm/mach-db1x00/irq.h:#define NR_IRQS 152
arch/mips/include/asm/mach-lantiq/falcon/irq.h:#define NR_IRQS 328
Signed-off-by: Joe Perches <joe@perches.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10091/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
cpu_set was removed (along with a bunch of cpumask helpers) by
commit 2f0f267ea0 ("cpumask: remove deprecated functions.").
Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.
arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]
Fixes: 90db024f14 ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Acked-by: Niklas Cassel <niklass@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9912/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
__show_regs() calls show_regs_print_info(), which already outputs
the Tainted: information. So, no need to output it twice.
Signed-off-by: Petri Gynther <pgynther@google.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9997/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse
command line (and build fails with: /bin/sh: syntax error:
unexpected "(") since make tries to expand starting with the dollar
sign with a make variable. Prevent that by using double dollar sign.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10025/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix "BUG: using smp_processor_id() in preemptible" reported in accesses
to thread's FPU defaults: the value to initialise FSCR to at program
startup, the FCSR r/w mask and the contents of FIR in full FPU
emulation, removing a regression introduced with 9b26616c [MIPS: Respect
the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR
feature flags for full emulation].
Use `boot_cpu_data' to obtain the data from, following the approach that
`cpu_has_*' macros take and avoiding the call to `smp_processor_id' made
in the reference to `current_cpu_data'. The contents of FSCR have to be
consistent across processors in an SMP system, the settings there must
not change as a thread is migrated across processors. And the contents
of FIR are guaranteed to be consistent in FPU emulation, by definition.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10030/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 46490b5725 ("MIPS: kernel: elf: Improve the overall ABI and FPU
mode checks") reworked the ELF FP ABI mode selection logic, but when
CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries
which have no PT_MIPS_ABIFLAGS program header & associated
.MIPS.abiflags section.
A default mode is selected based upon whether the ELF contains MIPS32 or
MIPS64 code, but that selection is made in arch_elf_pt_proc.
arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is
found. If one is not found then arch_elf_pt_proc is never called, and no
default overall_fp_mode value is selected. When arch_check_elf is
called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both
prog_req & interp_req being set to none_req. none_req matches none of
the conditions for mode selection at the end of arch_check_elf, so
overall_fp_mode is left untouched. Finally once mips_set_personality_fp
is called the BUG() in the default case is then hit & the kernel likely
panics.
Fix this by moving the selection of a default overall mode to the start
of arch_check_elf, which runs once per ELF executed regardless of
whether it has a PT_MIPS_ABIFLAGS program header.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.0+
Patchwork: http://patchwork.linux-mips.org/patch/9978/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/kernel/smp.o
arch/mips/kernel/smp.c: In function ‘start_secondary’:
arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
cpumask_set_cpu(cpu, &cpu_callin_map);
^
In file included from ./arch/mips/include/asm/processor.h:14:0,
from ./arch/mips/include/asm/thread_info.h:15,
from include/linux/thread_info.h:54,
from include/asm-generic/preempt.h:4,
from arch/mips/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:18,
from include/linux/interrupt.h:8,
from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
^
arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’:
arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
cpumask_set_cpu(0, &cpu_callin_map);
^
In file included from ./arch/mips/include/asm/processor.h:14:0,
from ./arch/mips/include/asm/thread_info.h:15,
from include/linux/thread_info.h:54,
from include/asm-generic/preempt.h:4,
from arch/mips/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:18,
from include/linux/interrupt.h:8,
from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
^
arch/mips/kernel/smp.c: In function ‘__cpu_up’:
arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
while (!cpumask_test_cpu(cpu, &cpu_callin_map))
^
In file included from ./arch/mips/include/asm/processor.h:14:0,
from ./arch/mips/include/asm/thread_info.h:15,
from include/linux/thread_info.h:54,
from include/asm-generic/preempt.h:4,
from arch/mips/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:18,
from include/linux/interrupt.h:8,
from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask)
^
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/kernel/smp.o] Error 1
make[1]: *** [arch/mips/kernel] Error 2
make: *** [arch/mips] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Here's the big tty/serial driver update for 4.1-rc1.
It was delayed for a bit due to some questions surrounding some of the
console command line parsing changes that are in here. There's still
one tiny regression for people who were previously putting multiple
console command lines and expecting them all to be ignored for some odd
reason, but Peter is working on fixing that. If not, I'll send a revert
for the offending patch, but I have faith that Peter can address it.
Other than the console work here, there's the usual serial driver
updates and changes, and a buch of 8250 reworks to try to make that
driver easier to maintain over time, and have it support more devices in
the future.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlU2IcUACgkQMUfUDdst+ylFqACcC8LPhFEZg9aHn0hNUoqGK3rE
5dUAnR4b8r/NYqjVoE9FJZgZfB/TqVi1
=lyN/
-----END PGP SIGNATURE-----
Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here's the big tty/serial driver update for 4.1-rc1.
It was delayed for a bit due to some questions surrounding some of the
console command line parsing changes that are in here. There's still
one tiny regression for people who were previously putting multiple
console command lines and expecting them all to be ignored for some
odd reason, but Peter is working on fixing that. If not, I'll send a
revert for the offending patch, but I have faith that Peter can
address it.
Other than the console work here, there's the usual serial driver
updates and changes, and a buch of 8250 reworks to try to make that
driver easier to maintain over time, and have it support more devices
in the future.
All of these have been in linux-next for a while"
* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
n_gsm: Drop unneeded cast on netdev_priv
sc16is7xx: expose RTS inversion in RS-485 mode
serial: 8250_pci: port failed after wakeup from S3
earlycon: 8250: Document kernel command line options
earlycon: 8250: Fix command line regression
earlycon: Fix __earlycon_table stride
tty: clean up the tty time logic a bit
serial: 8250_dw: only get the clock rate in one place
serial: 8250_dw: remove useless ACPI ID check
dmaengine: hsu: move memory allocation to GFP_NOWAIT
dmaengine: hsu: remove redundant pieces of code
serial: 8250_pci: add Intel Tangier support
dmaengine: hsu: add Intel Tangier PCI ID
serial: 8250_pci: replace switch-case by formula for Intel MID
serial: 8250_pci: replace switch-case by formula
tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
serial: jsm: some off by one bugs
serial: xuartps: Fix check in console_setup().
serial: xuartps: Get rid of register access macros.
serial: xuartps: Fix iobase use.
...
