forked from luck/tmp_suning_uos_patched
c25b456dc5
272 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
916f562fb2 |
This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/ tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd O2zWCGffeYs= =mK0C -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ... |
||
|
Linus Torvalds
|
556e2f6020 |
A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio
-----BEGIN PGP SIGNATURE-----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=3QYB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
|
||
|
Thomas Gleixner
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
YueHaibing
|
da6a5dda5e |
clk: ti: Remove unused functions
They are not used any more since
commit
|
||
|
Tony Lindgren
|
41b3588dba |
clk: ti: clkctrl: Fix returning uninitialized data
If we do a clk_get() for a clock that does not exists, we have
_ti_omap4_clkctrl_xlate() return uninitialized data if no match
is found. This can be seen in some cases with SLAB_DEBUG enabled:
Unable to handle kernel paging request at virtual address 5a5a5a5a
...
clk_hw_create_clk.part.33
sysc_notifier_call
notifier_call_chain
blocking_notifier_call_chain
device_add
Let's fix this by setting a found flag only when we find a match.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes:
|
||
|
Thomas Gleixner
|
a10e763b87 |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
20f9449656 |
A few clk driver fixes
- Don't expose the SiFive clk driver on non-RISCV architectures
- Fix some bits describing clks in the imx8mm driver
- Always call clk domain code in the TI driver so non-legacy platforms
work
-----BEGIN PGP SIGNATURE-----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=gbSJ
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Don't expose the SiFive clk driver on non-RISCV architectures
- Fix some bits describing clks in the imx8mm driver
- Always call clk domain code in the TI driver so non-legacy platforms
work
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix clkdm_clk handling
clk: imx: imx8mm: fix int pll clk gate
clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
|
||
|
Tony Lindgren
|
1cc54078d1 |
clk: ti: clkctrl: Fix clkdm_clk handling
We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.
Fixes:
|
||
|
Thomas Gleixner
|
ec8f24b7fa |
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Stephen Boyd
|
62e59c4e69 |
clk: Remove io.h from clk-provider.h
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Tero Kristo
|
869decd1ff |
clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices
RNG and TIMER12 are reserved for secure side usage only on HS devices, so disable their clkctrl clocks on HS SoCs also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Tero Kristo
|
2b1202d708 |
clk: ti: dra7x: prevent non-existing clkctrl clocks from registering
Certain clkctrl clocks (like the USB_OTG_SS4) do not exist on some variants of the dra7x SoC. Append a flag for these clocks and skip the registration in cases where the clocks do not exist. Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Tero Kristo
|
b88b5b7182 |
clk: ti: export the omap2_clk_is_hw_omap call
There is one instance outside the TI clock driver that needs the info whether a clock is an OMAP HW clock or not. Thus, move the function declaration into the public header. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Linus Torvalds
|
dc2535be1f |
We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional() API
to get clks that may not always be populated and a way to devm manage clkdev
lookups registered by provider drivers. We also do some refactoring to simplify
the interface between clkdev and the common clk framework so we can reuse the DT
parsing and clk_get() path in provider drivers in the future. This work will
continue in the next few cycles while we convert how providers specify clk
parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk driver
that got support for the G12A SoC. It dominates with almost half the overall
diff, while the second largest part of the diff is in the i.MX clk driver
that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
and Qualcomm drivers rounding out the big part of the dirstat because they both
got new hardware support for SoCs. The rest is just various updates and non-critical
fixes for existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support
-----BEGIN PGP SIGNATURE-----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=D4Bv
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional()
API to get clks that may not always be populated and a way to devm
manage clkdev lookups registered by provider drivers. We also do some
refactoring to simplify the interface between clkdev and the common
clk framework so we can reuse the DT parsing and clk_get() path in
provider drivers in the future. This work will continue in the next
few cycles while we convert how providers specify clk parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk
driver that got support for the G12A SoC. It dominates with almost
half the overall diff, while the second largest part of the diff is in
the i.MX clk driver that gained support for imx8mm SoCs. After that,
we have the Actions Semiconductor and Qualcomm drivers rounding out
the big part of the dirstat because they both got new hardware support
for SoCs. The rest is just various updates and non-critical fixes for
existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
clk: fixup default index for of_clk_get_by_name()
clk: Move of_clk_*() APIs into clk.c from clkdev.c
clk: Inform the core about consumer devices
clk: Introduce of_clk_get_hw_from_clkspec()
clk: core: clarify the check for runtime PM
clk: Combine __clk_get() and __clk_create_clk()
clk: imx8mq: add GPIO clocks to clock tree
clk: mediatek: correct cpu clock name for MT8173 SoC
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: mediatek: Mark bus and DRAM related clocks as critical
clk: mediatek: Add flags to mtk_gate
clk: mediatek: Add MUX_FLAGS macro
clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
clk: ingenic: Remove set but not used variable 'enable'
clk: at91: programmable: remove unneeded register read
clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
clk: mediatek: add MUX_GATE_FLAGS_2
...
|
||
|
Mike Rapoport
|
8a7f97b902 |
treewide: add checks for the return value of memblock_alloc*()
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Reviewed-by: Juergen Gross <jgross@suse.com> [Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Tony Lindgren
|
d17a718db4 |
clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
Commit |
||
|
Stephen Boyd
|
e7faa095cb |
Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next
- Split LCDC into two clks on the Marvell MMP2 SoC
* clk-imx:
clk: imx8mq: add GPIO clocks to clock tree
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: imx: imx8mm: Mark init function __init
clk: imx8mq: Add the missing ARM clock
dt-bindings: imx8mq-clock: Add the missing ARM clock
clk: imx: imx8mq: Fix the rate propagation for arm pll
clk: imx8mq: Add support for the CLKO1 clock
clk: imx8mq: Fix the CLKO2 source select list
clk: imx8mq: Add missing M4 clocks
clk: imx: Add clock driver support for imx8mm
dt-bindings: imx: Add clock binding doc for imx8mm
clk: imx: Add PLLs driver for imx8mm soc
clk: imx5: add imx5_SCC2_IPG_GATE
clk: imx: scu: add set parent support
clk: imx: scu: add fallback compatible string support
clk: imx8mq: Make parent names arrays const pointers
clk: imx: Make parents const pointer in mux wrappers
clk: imx: Make parent_names const pointer in composite-8m
* clk-samsung:
clk: samsung: s3c2443: Mark expected switch fall-through
clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
clk: samsung: exynos5433: Add selected IMEM clocks
clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
clk: samsung: exynos5433: Fix name typo in sssx
clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs
* clk-ti:
clk: clk-twl6040: Fix imprecise external abort for pdmclk
ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
clk: ti: check clock type before doing autoidle ops
clk: ti: add a usecount for autoidle
clk: ti: generalize the init sequence of clk_hw_omap clocks
clk: ti: remove usage of CLK_IS_BASIC
clk: ti: add new API for checking if a provided clock is an OMAP clock
clk: ti: move clk_hw_omap list handling under generic part of the driver
* clk-uniphier-gear:
clk: uniphier: Fix update register for CPU-gear
* clk-mmp2-lcdc:
clk: mmp2: separate LCDC peripheral clk form the display clock
dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
|
||
|
Stephen Boyd
|
7e2570031a |
Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next
- Various DT of_node refcount fixes - Support for fixed rate clks populated from an MMIO register - Remove clps711x driver as the board support is gone * clk-of-refcount: clk: dove: fix refcount leak in dove_clk_init() clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init() clk: armada-xp: fix refcount leak in axp_clk_init() clk: kirkwood: fix refcount leak in kirkwood_clk_init() clk: armada-370: fix refcount leak in a370_clk_init() clk: vf610: fix refcount leak in vf610_clocks_init() clk: imx7d: fix refcount leak in imx7d_clocks_init() clk: imx6sx: fix refcount leak in imx6sx_clocks_init() clk: imx6q: fix refcount leak in imx6q_clocks_init() clk: samsung: exynos4: fix refcount leak in exynos4_get_xom() clk: socfpga: fix refcount leak clk: ti: fix refcount leak in ti_dt_clocks_register() clk: qoriq: fix refcount leak in clockgen_init() clk: highbank: fix refcount leak in hb_clk_init() * clk-mmio-fixed-clock: clk: Add Fixed MMIO clock driver dt-bindings: clk: Add bindings for Fixed MMIO clock * clk-remove-clps: clk: clps711x: Remove board support * clk-socfpga-parent: clk: socfpga: Don't have get_parent for single parent ops * clk-struct-size: clk: imx: imx7ulp: use struct_size() in kzalloc() |
||
|
Andreas Kemnade
|
fddf4e29a6 |
clk: ti: check clock type before doing autoidle ops
Code might use autoidle api with clocks not being omap2 clocks, so check if clock type is really omap2. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
||
|
Andreas Kemnade
|
d277ce2d3a |
clk: ti: add a usecount for autoidle
Multiple users might deny autoidle on a clock. So we should have some counting here, also according to the comment in _setup_iclk_autoidle(). Also setting autoidle regs is not atomic, so there is another reason for locking. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
||
|
Tero Kristo
|
ead478250b |
clk: ti: generalize the init sequence of clk_hw_omap clocks
Add a generic API for initializing clocks of clk_hw_omap type clocks, and convert the whole TI clock driver suite to use this for registering the clocks. Also, get rid of the now redundant API for adding the clocks to the OMAP HW clocks list; instead this is used directly from the register API. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> |
||
|
Tero Kristo
|
8aa09cf322 |
clk: ti: remove usage of CLK_IS_BASIC
Remove the usage of CLK_IS_BASIC flag completely from TI clock driver. In most cases, the use is completely redundant, but in some cases we need to use the new API to check if the clock is an OMAP clock or not. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> |
||
|
Tero Kristo
|
7fd79ee78a |
clk: ti: add new API for checking if a provided clock is an OMAP clock
omap2_clk_is_hw_omap can now be used to verify if the provided clk_hw is an omap HW clock or not. This is done to replace the usage of CLK_IS_BASIC flag within the TI clock drivers. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> |
||
|
Tero Kristo
|
77b773aea5 |
clk: ti: move clk_hw_omap list handling under generic part of the driver
Currently the clk_hw_omap list is handled under the autoidle code, but it should be accessible generically. Add a few APIs towards this, and update the autoidle code to use the generic implementations. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> |
||
|
Dan Carpenter
|
303aef8b84 |
clk: ti: Fix error handling in ti_clk_parse_divider_data()
The ti_clk_parse_divider_data() function is only called from
_get_div_table_from_setup(). That function doesn't look at the return
value but instead looks at the "*table" pointer. In this case, if the
kcalloc() fails then *table is NULL (which means success). It should
instead be an error pointer.
The ti_clk_parse_divider_data() function has two callers. One checks
for errors and the other doesn't. I have fixed it so now both handle
errors.
Fixes:
|
||
|
Yangtao Li
|
2274d8001f |
clk: ti: fix refcount leak in ti_dt_clocks_register()
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
|
||
|
Rob Herring
|
87ab115185 |
clk: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500) Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Linus Torvalds
|
519f64bf15 |
This time it looks like a quieter release cycle in the clk tree. I guess that's
because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvY4ysRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVaDBAA3Wv/rsCn4FJ2ZgIWYWQqr69lAWDcBVVe 4nNbFqzEmRoml8e+XOfVFwnbsai4B5ALVxyMnRlkDyxQ5TFQtF957U12Pf8upPa5 R447YBt4tw40NCj8u5KNAaBmYYHdmXXDvsBPXyQn+1iy/9R8Is8AcDmv+D2ucuJF PPBXOwb+2CstUQhuwlXyvsAw/tqq/rJDVyAZVJUoqXJwlNMjr76V0m0ZXHN6NcyC F2SfnzIO4srRteTeKXVFcMU/3uHC3zofEfammSJjGZkk4WHULuPpkD17RMEyBul1 Ju1S1nzGiKvYME/mmbIcRPNcpry65EVo/wn6IjAcG2m4GaWSq3F6qIttnoc6dnra R2VylIEy7HnNcAf8fkQdkd/l+h/TDp3iVrXg0p/rRxRk4Jlc86n2PWO6jtsZv4S+ NySeRhTb51KrTl72J76LP+dfDWdbeZfkAqr0Qx6QM04OznVYSTHlnQaeM1Nx2SZR 5+k126NdxDp7xgoJNfq18wzufrlefjuRTg2Kck1YuFuhV4Fjmq7ZC81bSSaakYPh /t073TcSZ+VfEYP5hVsl/pjMdFzHcj8pbavhs0UNIYLQNXe494Bm9PyYJOzQKnwz Zpbf7V6eplh8J1I03VI8RHviNp340iv2hhz9vp4mNP1vIhgdNiz7R2gn5sLSoFt+ vei0J0vEzCA= =V5aK -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time it looks like a quieter release cycle in the clk tree. I guess that's because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits) clk: qcom: Remove unused arrays in SDM845 GCC clk: fixed-rate: fix of_node_get-put imbalance clk: s2mps11: Add used attribute to s2mps11_dt_match clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock ... |
||
|
Mike Rapoport
|
7e1c4e2792 |
memblock: stop using implicit alignment to SMP_CACHE_BYTES
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
57c8a661d9 |
mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
eb31d559f1 |
memblock: remove _virt from APIs returning virtual address
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Stephen Boyd
|
8a69f1d470 |
Merge branch 'clk-ti' into clk-next
* clk-ti: clk: ti: Prepare for remove of OF node name clk: Clean up suspend/resume coding style clk: ti: Add functions to save/restore clk context clk: clk: Add clk_gate_restore_context function clk: Add functions to save/restore clock context en-masse clk: ti: dra7: add new clkctrl data clk: ti: dra7xx: rename existing clkctrl data as compat data clk: ti: am43xx: add new clkctrl data for am43xx clk: ti: am43xx: rename existing clkctrl data as compat data clk: ti: am33xx: add new clkctrl data for am33xx clk: ti: am33xx: rename existing clkctrl data as compat data clk: ti: clkctrl: replace dashes from clkdm name with underscore clk: ti: clkctrl: support multiple clkctrl nodes under a cm node dt-bindings: clock: dra7xx: add clkctrl indices for new data layout dt-bindings: clock: am43xx: add clkctrl indices for new data layout dt-bindings: clock: am33xx: add clkctrl indices for new data layout |
||
|
Stephen Boyd
|
9710ee14be |
Merge branches 'clk-dt-name', 'clk-ti-of-node' and 'clk-sa' into clk-next
- Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds * clk-dt-name: clk: Convert to using %pOFn instead of device_node.name * clk-ti-of-node: clk: ti: fix OF child-node lookup * clk-sa: clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe reset: hisilicon: fix potential NULL pointer dereference clk: cdce925: release child device nodes clk: qcom: clk-branch: Use true and false for boolean values |
||
|
Stephen Boyd
|
a72d785021 |
clk: ti: Prepare for remove of OF node name
Another patch is going to change this code to use %pOFn for DT node names. Fix up the code to make this easy to pick this side of the merge instead of fixing it up in a merge commit later. Cc: Tero Kristo <t-kristo@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Russ Dill
|
d6e7bbc148 |
clk: ti: Add functions to save/restore clk context
SoCs like AM43XX lose clock registers context during RTC-only suspend. Hence add functions to save/restore the clock registers context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
||
|
Tero Kristo
|
dffa9051d5 |
clk: ti: dra7: add new clkctrl data
The new clkctrl data layout for dra7xx is split based on clockdomain boundaries. Previously the split was based on CM boundaries. This patch adds the new data as separate data entity, retaining the compatibility data also for now. The compatibility data can be removed once no longer needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
43c56e046c |
clk: ti: dra7xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm based split for it. Once the DT data has transitioned also, the compat data can be removed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
76a1049b84 |
clk: ti: am43xx: add new clkctrl data for am43xx
The new clkctrl data layout for am43xx is split based on clockdomain boundaries. Previously the split was based on CM boundaries. This patch adds the new data as separate data entity, retaining the compatibility data also for now. The compatibility data can be removed once no longer needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
131ee08f3f |
clk: ti: am43xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm based split for it. Once the DT data has transitioned also, the compat data can be removed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
296e583e99 |
clk: ti: am33xx: add new clkctrl data for am33xx
The new clkctrl data layout for am33xx is split based on clockdomain boundaries. Previously the split was based on CM boundaries. This patch adds the new data as separate data entity, retaining the compatibility data also for now. The compatibility data can be removed once no longer needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
e97017f935 |
clk: ti: am33xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm based split for it. Once the DT data has transitioned also, the compat data can be removed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
1dc88f78da |
clk: ti: clkctrl: replace dashes from clkdm name with underscore
The change in the DTS data node naming prevents using underscore within the node names and force usage of dash instead. On the other hand, clockdomains use underscore instead of dash, so this must be replaced within the driver code so that the mapping between the two can be done properly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Tero Kristo
|
47b00dcf14 |
clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
Currently, only one clkctrl node can be added under a specific CM node due to limitation with the implementation. Modify the code to pick-up clockdomain name from the clkctrl node instead of CM node if provided. Also, add a new flag to the TI clock driver so that both modes can be supported simultaneously. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> |
||
|
Johan Hovold
|
00a461cc32 |
clk: ti: fix OF child-node lookup
Fix child-node lookup which by using the wrong OF helper was searching
the whole tree depth-first, something which could end up matching an
unrelated node.
Also fix the related node-reference leaks.
Fixes:
|
||
|
Rob Herring
|
e665f029a2 |
clk: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Faiz Abbas
|
91c17a7006 |
clk: ti: dra7: Add clkctrl clock data for the mcan clocks
Add clkctrl data for the m_can clocks and register it within the clkctrl driver Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Kees Cook
|
a86854d0c5 |
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Kees Cook
|
6396bb2215 |
treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Linus Torvalds
|
ca4e7c5120 |
The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+ /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf X6P2pfkBqkg= =ys4O -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ... |
||
|
Stephen Boyd
|
a83fdfae5a |
Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' and 'clk-ti-flag-fix' into clk-next
* clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag |