Commit Graph

1812 Commits

Author SHA1 Message Date
Vitaly Bordug
c4cbfd64f9 [POWERPC] mpc8272ads: defconfig
Default config file for mpc8272ads (powerpc port).Though relevant bits went
in, it is required to keep proper default configuration for the target,
which seems to be missed initially.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug
5427828e83 [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug
73844ecbaa [POWERPC] cpm2: CPM2 interrupt controller fix
This contains important fixes for the CPM2 PIC code. Eliminated
CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt
mapping. Updated devicetree files to reflect that. Changed direct
IC-related IO accesses to the IO accessors. Fixed all the sense values to
keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs
and hence could be hardly usable.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand
c19cdcb1b8 [POWERPC] PS3: Enable USB mass storage
Update ps3_defconfig to enable USB mass storage and VFAT.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand
35063bb2ea [POWERPC] PS3: Fix DMA scatter-gather
Add the missing pieces to support DMA scatter-gather on the PS3 system bus.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand
2a08ea69a3 [POWERPC] PS3: Move system bus to platform directory
Move the PS3 system bus routines from drivers/ps3 to
arch/powerpc/platforms/ps3.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Robert P. J. Day
63c2f782e8 [POWERPC] Add "is_power_of_2" checking to log2.h.
Add the inline function "is_power_of_2()" to log2.h, where the value
zero is *not* considered to be a power of two.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson
7df2457db8 [POWERPC] MPIC: support more than 256 sources
Allow more than the default 256 MPIC sources. Allocates a new flag
(MPIC_LARGE_VECTORS) to be used by platform code when instantiating
the mpic.

I picked 11 bits worth right now since it would cover the number of
sources on any hardware I have seen. It can always be increased later
if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson
6529c13dfe [POWERPC] PA6T PMC support
Support for PA6T-style PMC registers.

PMCs are completely implementation-dependent on PPC, and PA6T numbers them
differently from the IBM model.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson
1bd2e5ae18 [POWERPC] Add PMC type to cputable
Add cputable entries for which type of PMC implementation the processor
has.

I've only filled in the current 64-bit processors, the unfilled default
value will have same behaviour as before so it can be done over time
as needed.

Also tidy up the dummy_perf implementation a bit, aggregating it into
one function with ifdefs instead of several.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson
c69b767a2c [POWERPC] Oprofile cleanup
Clean up the ctr_read/write a bit. It's currently defined in the
include but only used in one C file each. The only exception is the
classic version, so keep that in the include and define in the C file
as appropriate.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Timur Tabi
4942bd80e8 [POWERPC] Fix array indexing error in rheap grow()
The grow() function in the rheap library allocates a larger array of blocks,
copies the contents of the old blocks array to the newly allocated array and
fixes the list_head pointers after the copy.  At the end, the new blocks must
be enqueued to the empty_list of the rh_info_t structure.  This patch fixes
a bug where the code was indexing past the end of the array when enqueueing
blocks.  The UCC ethernet driver, which uses the rheap allocator, experiences
kernel panics because of this bug.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Geoff Levand
5f3162f066 [POWERPC] ps3: ps3_defconfig updates
Updates for ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Geert Uytterhoeven
098e274427 [POWERPC] ps3: get av_multi_out params
Allow the PS3 AV settings driver to access the default video mode stored in
the OS area.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
66b44954f8 [POWERPC] ps3: get firmware version
Add a new routine ps3_get_firmware_version() and use it to output the firmware
version to dmesg.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
73d976b339 [POWERPC] ps3: remove cpuinfo
Remove the unneded routine ps3_show_cpuinfo().  The common platform code now
prints the same information.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
577157659f [POWERPC] ps3: fix interrupt bmp
Add a comment and a preprocessor macro to help clearify the alignment
needs of the PS3 interrupt bitmap.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geert Uytterhoeven
b1eeb38e45 [POWERPC] ps3: add interrupt alloc for outlets
PS3 interrupt core update:
  - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt
    number for an interrupt outlet, which is needed by the PS3 GPU frame
    buffer device and audio drivers

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
861be32ce7 [POWERPC] ps3: bind interrupt to cpu
Change the PS3 irq allocation routines to take an argument indicating which
cpu (processor thread) the interrupt should be serviced on.

The current system configuration favors device interrupts that are serviced
on cpu0, so that is used as the default.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Benjamin Herrenschmidt
9cf9e19667 [POWERPC] ps3: cleanup interrupt bmp routines
Change the PS3 interrupt bitmask routines to be lockless.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
407e24a0c7 [POWERPC] ps3: smp interrupt fixes
PS3 fixups for interrups on SMP.

Fixes the alignment of the interrupt status bitmap, changes the hypervisor
interrupt calls to the '_ext' versions that take an explicit processor
thread ID.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
9633ac8d17 [POWERPC] ps3: rename interrupt symbols
Rename some PS3 interrupt symbols to avoid name clashes and aid debugging.
No change to code.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand
a8229a9e52 [POWERPC] ps3: fix struct alignment attributes
Remove incorrect alignment attributes in PS3 platform code for
struct spe_shadow, struct os_area_header, and struct os_area_params.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geert Uytterhoeven
6c7be7d385 [POWERPC] ps3: repository storage support
Handle storage-related repository data:
  - Add missing implementations of ps3_repository_read_stor_*() repository
    accessors.
  - Dump storage properties in debug mode
  - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to
    the corresponding SCSI device types) to enum ps3_dev_type

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Geoff Levand
eebb81c13a [POWERPC] ps3: repository misc fixes
Various fixes for the PS3 repository code:

  - Sync signatures of function prototypes and implementations (enum vs.
    unsigned int)
  - Correct references to `regions' as `registers':
      o Correct enum ps3_region_type as enum ps3_reg_type,
      o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*,
      o Correct ps3_repository_find_region() as ps3_repository_find_reg().
  - Correct function name in pr_debug() call
  - Minor error condition improvements.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Linas Vepstas
25c4a46f0e [POWERPC] pSeries: EEH improperly enabled for some Power4 systems
It appears that EEH is improperly enabled for some Power4 systems.
On these systems, the ibm,set-eeh-option returns a value of success
even when EEH is not supported on the given node. Thus, an explicit
check for support is required.

During boot, on power4, without this patch, one sees messages
similar to:

EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2
etc.

The patch makes these go away.

Without this patch, EEH recovery does seem to work correctly for
at least some devices (I tested ethernet e1000), but fails to
recover others (the Emulex LightPulse LPFC, most notably).
Off the top of my head, I don't remember why some devices are
affected, but not others.

The PAPR indicates that the correct way to test for EEH is as
done in this patch; its not clear to me if this was in the PAPR
all along, or recently added; if it was there all along, its not
clear to me why this hadn't been fixed long ago. I suspect only
certain firmware levels are affected.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Nathan Lynch
59eaef9dae [POWERPC] Maple: don't override bus-range supplied by firmware
This workaround was copy-pasted from the powermac code.  It's not
necessary for maple.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
29f1530f19 [POWERPC] Add mpc866ads board-specific bits to arch/powerpc
This add support of the Freescale mpc86xads reference board to
arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC
100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx)

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
df34403dca [POWERPC] 8xx: Add mpc885ads support and common mpc8xx files
This adds the core 8xx stuff and specifically mpc885ads board-specific
bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff
not yet ported over to avoid confusion. Updated and cleaned version.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
f2a0bd3753 [POWERPC] 8xx: powerpc port of core CPM PIC
This covers common CPM access functions, CPM interrupt controller code,
micropatch and a few compatibility things to kee the same driver base
working with arch/ppc. This version is refined with all the comments
(mostly PIC-related) addressed.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
88bdc6f061 [POWERPC] 8xx: platform related changes to the fsl_soc
Added 8xx SoC peripherials: fec for Ethernet and smc for UARTs.
Ordinary routines to extract values from the device tree and insert
respective platform devices

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
5902ebce22 [POWERPC] 8xx: generic 8xx code arch/powerpc port
Including support for non-coherent cache, some mm-related things +
relevant field in Kconfig and Makefiles. Also included rheap.o compilation
if 8xx is defined.

Non-coherent mapping were refined and renamed according to Cristoph
Hellwig. Orphaned functions were cleaned up.

[Also removed arch/ppc/kernel/dma-mapping.c, because otherwise
compiling with ARCH=ppc for a non DMA-cache-coherent platform ends up
with two copies of __dma_alloc_coherent etc.
 -- paulus.]

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:01:02 +11:00
Vitaly Bordug
dbbb06b7f6 [POWERPC] 8xx: platform specific mmu updates
This is just a straight port of the same done in arch/ppc
by Marcelo Tosatti. One used to be
[PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie,
commit eb07d964b4

In a nutshell, the board is nearly stuck without this, yet without any
visible failure - being just very slow.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 12:00:32 +11:00
Kim Phillips
18a1e4c3ee [POWERPC] 83xx: Add the mpc8323emds.dts
Add the mpc8323emds device tree source (dts)

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 16:23:58 -06:00
Kim Phillips
a33a9641c9 [POWERPC] 83xx: Add the mpc832xemds defconfig
The defconfig for the 8323EMDS is identical to the 8360E MDS defconfig,
except CONFIG_MATH_EMULATION is set, since the 8323 doesn't have a FPU.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 16:23:39 -06:00
Kumar Gala
304df8f7ef [POWERPC] Enable stack debug features on ppc32
Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage
(DEBUG_STACK_USAGE) on ppc32.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 00:45:56 -06:00
Kumar Gala
48809a9308 Merge branch '83xx' into for_paulus 2007-01-30 00:38:11 -06:00
Li Yang
3b6eb6af5f [POWERPC] 83xx: Fix compiler warnings on 836x and 832x
Some prototypes are separated from of_device.h into of_platform.h.  Add
the new include to fix warning.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 00:36:57 -06:00
Kumar Gala
8943212c97 [POWERPC] Remove fastcall function attribute
fastcall is an x86 specific function attribute and has no business in ppc code

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 01:52:27 -06:00
Kumar Gala
126186a055 [POWERPC] 83xx: Return a point to the struct ipic from ipic_init()
It's useful to have access to struct ipic handle that just got created
in ipic_init().

For example, if we want to setup an external IRQ with out
a device node we need access ipic->irqhost to create the virtual to HW
IRQ mapping and to set the IRQ sense.  With this we can mimic the old
sense array concept that existed in arch/ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 01:45:32 -06:00
Kumar Gala
e60bd7f14d [POWERPC] 83xx: Make platform *_init_IRQ() static
Make the various 83xx *_init_IRQ() functions static

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 00:41:57 -06:00
Kumar Gala
c75f902b93 [POWERPC] 83xx: Don't call ioremap in the reset function
It's possibly that we get an reset requestion when interrupts are disabled.
(For example an oops in an interrupt handler).  Therefor, we can't call
ioremap in the reset function.  Moving the ioremap of the registers we
need access to an arch_initcall helps the problem.

However we still have a window between boot and the arch_initcall in
which the register pointer will not be setup and thus we spin if the reset
function is called.  If one needs to ensure even this case is covered, look
at use of the watchdog provided on 83xx to reset the processor.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 00:37:11 -06:00
Kumar Gala
4d52719a76 [POWERPC] 83xx: Fix Kconfig to only enable FP math emulation for the MPC832x
Updated MATH_EMULATION depends to be on PPC_MPC832x instead of PPC_83xx.  Only
the the MPC832x has no floating point unit in the core.  Updated the other
83xx defconfigs that got math emulation turned on incorrectly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 00:23:34 -06:00
Ishizaki Kou
8b629a1f01 [POWERPC] Celleb: setup sio in SCC
This patch setup serial interfaces in SCC to work with serial_txx9
driver.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:36:02 +11:00
Ishizaki Kou
551a3d8785 [POWERPC] Celleb: Support PCI bus and base of I/O
This patch includes support for pci buses, base of Celleb specific
devices, and etc. It works on of_platform bus.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:35:45 +11:00
Ishizaki Kou
983e3f6027 [POWERPC] Celleb: Cell SCC definitions
Adds Cell SCC(Super Companion Chip) definitions.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:35:32 +11:00
Ishizaki Kou
ca58b8eb93 [POWERPC] Celleb: hypervisor call numbers
This patch creates Celleb platform dependent file to define Beat
hypervisor call numbers.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00
Ishizaki Kou
acc900ef5b [POWERPC] Add IRQ remapping hook
This patch adds irq remapping hook. On interrupt mechanism on Beat,
when an irq outlet which has an id which is formerly used is created,
remapping the irq is required.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00
Ishizaki Kou
ef66f79675 [POWERPC] Fix oprofile support on Cell LPAR
Op_model_cell supports native Cell. By returning -EINVAL, oprofile
uses timer interrupt on Cell LPAR.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00
Ishizaki Kou
d649bd7b76 [POWERPC] TLB insertion cleanup
This patch changes handling return value of ppc_md.hpte_insert() into
the same way as __hash_page_*().

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00