As mentioned in the comment next to it btrfs_ioctl_trans_start can
do bad damage to filesystems and thus should be limited to privilegued
users.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Split the ioctl handling out of inode.c into a file of it's own.
Also fix up checkpatch.pl warnings for the moved code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
mount -o thread_pool_size changes the default, which is
min(num_cpus + 2, 8). Larger thread pools would make more sense on
very large disk arrays.
This mount option controls the max size of each thread pool. There
are multiple thread pools, so the total worker count will be larger
than the mount option.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This changes the worker thread pool to maintain a list of idle threads,
avoiding a complex search for a good thread to wake up.
Threads have two states:
idle - we try to reuse the last thread used in hopes of improving the batching
ratios
busy - each time a new work item is added to a busy task, the task is
rotated to the end of the line.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
max_inline=0 used to force the max_inline size to one sector instead. Now
it properly disables inline data items, while still being able to read
any that happen to exist on disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system. But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.
This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up. The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.
The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines. Two worker pools are created,
one for writes and one for endio processing. The two could deadlock if
we tried to service both from a single pool.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Allows to specify one or multiple device=/dev/foo options during mount
so that ioctls on the control device can be avoided. Especially useful
when trying to mount a multi-device setup as root.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Also adds lots of comments to describe what's going on here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
use normal kbuild syntax to build acl.o conditinally and remove comment
out lines.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
These ioctls let a user application hold a transaction open while it
performs a series of operations. A final ioctl does a sync on the fs
(closing the current transaction). This is the main requirement for
Ceph's OSD to be able to keep the data it's storing in a btrfs volume
consistent, and AFAICS it works just fine. The application would do
something like
fd = ::open("some/file", O_RDONLY);
::ioctl(fd, BTRFS_IOC_TRANS_START);
/* do a bunch of stuff */
::ioctl(fd, BTRFS_IOC_TRANS_END);
or just
::close(fd);
And to ensure it commits to disk,
::ioctl(fd, BTRFS_IOC_SYNC);
When a transaction is held open, the trans_handle is attached to the
struct file (via private_data) so that it will get cleaned up if the
process dies unexpectedly. A held transaction is also ended on fsync() to
avoid a deadlock.
A misbehaving application could also deliberately hold a transaction open,
effectively locking up the FS, so it may make sense to restrict something
like this to root or something.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The acl code is not yet complete, and the xattr handlers are causing
problems for cp -p on some distros.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We need to invalidate an existing dcache entry after creating a new
snapshot or subvolume, because a negative dache entry will stop us from
accessing the new snapshot or subvolume.
---
ctree.h | 23 +++++++++++++++++++++++
inode.c | 4 ++++
transaction.c | 4 ++++
3 files changed, 31 insertions(+)
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When a new transaction was started, the code would incorrectly
set the pointer in fs_info before all the data structures were setup.
fsync heavy workloads hit races on the setup of the ordered inode spinlock
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This avoids IO stalls and poorly ordered IO from inline writers mixing in
with the async submission queue
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* Force chunk allocation when find_free_extent has to do a full scan
* Record the max key at the start of defrag so it doesn't run forever
* Block groups might not be contiguous, make a forward search for the
next block group in extent-tree.c
* Get rid of extra checks for total fs size
* Fix relocate_one_reference to avoid relocating the same file data block
twice when referenced by an older transaction
* Use the open device count when allocating chunks so that we don't
try to allocate from devices that don't exist
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The async submit workqueue was absorbing too many requests, leading to long
stalls where the async submitters were stalling.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The extent_io writepage calls needed an extra check for discarding
pages that started on th last byte in the file.
btrfs_truncate_page needed checks to make sure the page was still part
of the file after reading it, and most importantly, needed to wait for
all IO to the page to finish before freeing the corresponding extents on
disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Devices can change after the scan ioctls are done, and btrfs_open_devices
needs to be able to verify them as they are opened and used by the FS.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When duplicate copies exist, writes are allowed to fail to one of those
copies. This changeset includes a few changes that allow the FS to
continue even when some IOs fail.
It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Once part of a delalloc request fails the cow checks, just cow the
entire range
It is possible for the back references to all be from the same root,
but still have snapshots against an extent. The checks are now more strict,
forcing cow any time there are multiple refs against the data extent.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Before, nodatacow only checked to make sure multiple roots didn't have
references on a single extent. This check makes sure that multiple
inodes don't have references.
nodatacow needed an extra check to see if the block group was currently
readonly. This way cows forced by the chunk relocation code are honored.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This required a few structural changes to the code that manages bdev pointers:
The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev. This allows us to avoid swapping the super block bdev pointer
around at run time.
The code to read in the super block no longer goes through the extent
buffer interface. Things got ugly keeping the mapping constant.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In openSUSE 10.3, AppArmor modifies remove_suid to take a struct path
rather than just a dentry. This patch tests that the kernel is openSUSE
10.3 or newer and adjusts the call accordingly.
Debian/Ubuntu with AppArmor applied will also need a similar patch.
Maintainers of btrfs under those distributions should build on this
patch or, alternatively, alter their package descriptions to add
-DREMOVE_SUID_PATH to the compiler command line.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
- --- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ b/compat.h 2008-02-06 16:46:13.000000000 -0500
@@ -0,0 +1,15 @@
+#ifndef _COMPAT_H_
+#define _COMPAT_H_
+
+
+/*
+ * Even if AppArmor isn't enabled, it still has different prototypes.
+ * Add more distro/version pairs here to declare which has AppArmor applied.
+ */
+#if defined(CONFIG_SUSE_KERNEL)
+# if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
+# define REMOVE_SUID_PATH 1
+# endif
+#endif
+
+#endif /* _COMPAT_H_ */
- --- a/file.c 2008-02-06 11:37:39.000000000 -0500
+++ b/file.c 2008-02-06 16:46:23.000000000 -0500
@@ -37,6 +37,7 @@
#include "ordered-data.h"
#include "ioctl.h"
#include "print-tree.h"
+#include "compat.h"
static int btrfs_copy_from_user(loff_t pos, int num_pages, int write_bytes,
@@ -790,7 +791,11 @@ static ssize_t btrfs_file_write(struct f
goto out_nolock;
if (count == 0)
goto out_nolock;
+#ifdef REMOVE_SUID_PATH
+ err = remove_suid(&file->f_path);
+#else
err = remove_suid(fdentry(file));
+#endif
if (err)
goto out_nolock;
file_update_time(file);
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2.6.18 seems to get caught in an infinite loop when
cancel_rearming_delayed_workqueue is called more than once, so this switches
to cancel_delayed_work, which is arguably more correct.
Also, balance_dirty_pages can run into problems with 2.6.18 based kernels
because it doesn't have the per-bdi dirty limits. This avoids calling
balance_dirty_pages on the btree inode unless there is actually something
to balance, which is a good optimization in general.
Finally there's a compile fix for ordered-data.h
Signed-off-by: Chris Mason <chris.mason@oracle.com>
