Commit Graph

1295 Commits

Author SHA1 Message Date
David Woodhouse
e57e58bd39 iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users
Holding mm_users works OK for graphics, which was the first user of SVM
with VT-d. However, it works less well for other devices, where we actually
do a mmap() from the file descriptor to which the SVM PASID state is tied.

In this case on process exit we end up with a recursive reference count:
 - The MM remains alive until the file is closed and the driver's release()
   call ends up unbinding the PASID.
 - The VMA corresponding to the mmap() remains intact until the MM is
   destroyed.
 - Thus the file isn't closed, even when exit_files() runs, because the
   VMA is still holding a reference to it. And the MM remains alive…

To address this issue, we *stop* holding mm_users while the PASID is bound.
We already hold mm_count by virtue of the MMU notifier, and that can be
made to be sufficient.

It means that for a period during process exit, the fun part of mmput()
has happened and exit_mmap() has been called so the MM is basically
defunct. But the PGD still exists and the PASID is still bound to it.

During this period, we have to be very careful — exit_mmap() doesn't use
mm->mmap_sem because it doesn't expect anyone else to be touching the MM
(quite reasonably, since mm_users is zero). So we also need to fix the
fault handler to just report failure if mm_users is already zero, and to
temporarily bump mm_users while handling any faults.

Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears
down the page tables, which is too early for us to flush the IOTLB for
this PASID. And __mmu_notifier_release() removes every notifier from the
list, so when exit_mmap() finally *does* tear down the mappings and
clear the page tables, we don't get notified. So we work around this by
clearing the PASID table entry in our MMU notifier release() callback.
That way, the hardware *can't* get any pages back from the page tables
before they get cleared.

Hardware designers have confirmed that the resulting 'PASID not present'
faults should be handled just as gracefully as 'page not present' faults,
the important criterion being that they don't perturb the operation for
any *other* PASID in the system.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
2016-01-13 21:05:46 +00:00
Robin Murphy
164afb1d85 iommu/dma: Use correct offset in map_sg
When mapping a non-page-aligned scatterlist entry, we copy the original
offset to the output DMA address before aligning it to hand off to
iommu_map_sg(), then later adding the IOVA page address portion to get
the final mapped address. However, when the IOVA page size is smaller
than the CPU page size, it is the offset within the IOVA page we want,
not that within the CPU page, which can easily be larger than an IOVA
page and thus result in an incorrect final address.

Fix the bug by taking only the IOVA-aligned part of the offset as the
basis of the DMA address, not the whole thing.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-07 13:36:41 +01:00
Geert Uytterhoeven
f64232eee6 iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled
If CONFIG_PHYS_ADDR_T_64BIT=n:

    drivers/iommu/ipmmu-vmsa.c: In function 'ipmmu_domain_init_context':
    drivers/iommu/ipmmu-vmsa.c:434:2: warning: right shift count >= width of type
      ipmmu_ctx_write(domain, IMTTUBR0, ttbr >> 32);
      ^

As io_pgtable_cfg.arm_lpae_s1_cfg.ttbr[] is an array of u64s, assigning
it to a phys_addr_t may truncates it.  Make ttbr u64 to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-28 17:10:52 +01:00
Robin Murphy
0a9afeda80 iommu/dma: Avoid unlikely high-order allocations
Doug reports that the equivalent page allocator on 32-bit ARM exhibits
particularly pathalogical behaviour under memory pressure when
fragmentation is high, where allocating a 4MB buffer takes tens of
seconds and the number of calls to alloc_pages() is over 9000![1]

We can drastically improve that situation without losing the other
benefits of high-order allocations when they would succeed, by assuming
memory pressure is relatively constant over the course of an allocation,
and not retrying allocations at orders we know to have failed before.
This way, the best-case behaviour remains unchanged, and in the worst
case we should see at most a dozen or so (MAX_ORDER - 1) failed attempts
before falling back to single pages for the remainder of the buffer.

[1]:http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/394660.html

Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-28 17:06:26 +01:00
Robin Murphy
5b11e9cd42 iommu/dma: Add some missing #includes
dma-iommu.c was naughtily relying on an implicit transitive #include of
linux/vmalloc.h, which is apparently not present on some architectures.
Add that, plus a couple more headers for other functions which are used
similarly.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-28 17:03:34 +01:00
Linus Torvalds
ccdd96be43 IOMMU Fixes for Linux v4.4-rc5
* Two similar fixes for the Intel and AMD IOMMU drivers to add
 	  proper access checks before calling handle_mm_fault.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJWdCp7AAoJECvwRC2XARrjjAIP/0ihW2zF4R622RgY1C1Cm62j
 0eb/R4UqjI3PG0KsURgDHcIm9JP5Z//dgKTOtNX9KOkHlXLcO9MMSD5chVBd4HKG
 +Mgx7RM+Mr7f6ElRUa6s1GY1tcJlGf43fW5cMQ44BJIqVXlE47go4U09D86DVgXy
 KgyBxQldeOrkXZvAG82WLjGgkdGALQjbDlI8ktmfYWXAvIRWNGJqWY16BwAYOWfb
 9d3+1JPekSSBWHC6H+qbkDb8ueO69/Ux0HL5z2Q0zchqGjBb1gnfwLcz865KZpOB
 qUwsKFSXTl+jPCrAaLYJnVqAnH4qqKaF6WKAJSIHObTSVqXKHpFHrQrlGVzOvYNn
 s3216KIMsxG2nnvSgXCOFGqM/810MH2MSo8YcF5A3celrka3j2Gj08mxInrZXN7D
 3p51HSwq8ePo4i5jppT5ldOBSjNV9N3wKWcjDb4OL+OfkJc/u2VbSHNQtpvTclsV
 V6VSfWLDC8BCmUveMH2TrawQWkKOz0LqgqfQPX+VvSCIM7tgkrgVsTJrijPtGOs1
 zid/A/cfqMdBezSVALrZfB4OVBaM2UL2LJmmLJgApYV+N55Oxmx+nxnMr0aT5KlY
 crjcnVaypkq3rG1Wjpt+nTTwtllB0yXNEywQcu2edeswmaQCqsEgQRsDqi6S2/+S
 c8l9JKoTrB4+vToYjXyW
 =qrAB
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:
 "Two similar fixes for the Intel and AMD IOMMU drivers to add proper
  access checks before calling handle_mm_fault"

* tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Do access checks before calling handle_mm_fault()
  iommu/amd: Do proper access checking before calling handle_mm_fault()
2015-12-18 12:38:35 -08:00
Dan Williams
3e6110fd54 Revert "scatterlist: use sg_phys()"
commit db0fa0cb01 "scatterlist: use sg_phys()" did replacements of
the form:

    phys_addr_t phys = page_to_phys(sg_page(s));
    phys_addr_t phys = sg_phys(s) & PAGE_MASK;

However, this breaks platforms where sizeof(phys_addr_t) >
sizeof(unsigned long).  Revert for 4.3 and 4.4 to make room for a
combined helper in 4.5.

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: db0fa0cb01 ("scatterlist: use sg_phys()")
Suggested-by: Joerg Roedel <joro@8bytes.org>
Reported-by: Vitaly Lavrov <vel21ripn@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-15 12:54:06 -08:00
Joerg Roedel
7f8312a3b3 iommu/vt-d: Do access checks before calling handle_mm_fault()
Not doing so is a bug and might trigger a BUG_ON in
handle_mm_fault(). So add the proper permission checks
before calling into mm code.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-14 15:37:55 +01:00
Joerg Roedel
7b5cc1a9c9 iommu/amd: Do proper access checking before calling handle_mm_fault()
The handle_mm_fault function expects the caller to do the
access checks. Not doing so and calling the function with
wrong permissions is a bug (catched by a BUG_ON).
So fix this bug by adding proper access checking to the io
page-fault code in the AMD IOMMUv2 driver.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-14 15:37:47 +01:00
Sebastian Ott
66728eeea6 s390/pci_dma: handle dma table failures
We use lazy allocation for translation table entries but don't handle
allocation (and other) failures during translation table updates.

Handle these failures and undo translation table updates when it's
meaningful.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09 09:10:49 +01:00
Mel Gorman
d0164adc89 mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Linus Torvalds
2f4bf528ec powerpc updates for 4.4
- Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng
  - Refresh ps3_defconfig from Geoff Levand
  - Emit GNU & SysV hashes for the vdso from Michael Ellerman
  - Define an enum for the bolted SLB indexes from Anshuman Khandual
  - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman
  - Add gettimeofday() benchmark from Michael Neuling
  - Avoid link stack corruption in __get_datapage() from Michael Neuling
  - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V
  - Add ppc64le_defconfig from Michael Ellerman
  - pseries: extract of_helpers module from Andy Shevchenko
  - Correct string length in pseries_of_derive_parent() from Nathan Fontenot
  - Free the MSI bitmap if it was slab allocated from Denis Kirjanov
  - Shorten irq_chip name for the SIU from Christophe Leroy
  - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas
  - Fix _ALIGN_* errors due to type difference. from Aneesh Kumar K.V
  - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King
  - Disable hugepd for 64K page size. from Aneesh Kumar K.V
  - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V
  - Make PCI non-optional for pseries from Michael Ellerman
  - Individual System V IPC system calls from Sam bobroff
  - Add selftest of unmuxed IPC calls from Michael Ellerman
  - discard .exit.data at runtime from Stephen Rothwell
  - Delete old orphaned PrPMC 280/2800 DTS and boot file. from Paul Gortmaker
  - Use of_get_next_parent to simplify code from Christophe Jaillet
  - Paginate some xmon output from Sam bobroff
  - Add some more elements to the xmon PACA dump from Michael Ellerman
  - Allow the tm-syscall selftest to build with old headers from Michael Ellerman
  - Run EBB selftests only on POWER8 from Denis Kirjanov
  - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman
  - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet
  - Quieten boot wrapper output with run_cmd from Geoff Levand
  - EEH fixes and cleanups from Gavin Shan
  - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
  - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman
  - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov
  - Fix ps3-lpm white space from Rudhresh Kumar J
  - Fix ps3-vuart null dereference from Colin King
  - nvram: Add missing kfree in error path from Christophe Jaillet
  - nvram: Fix function name in some errors messages. from Christophe Jaillet
  - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen
  - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
  - cxl: Free virtual PHB when removing from Andrew Donnellan
  - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman
  - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman
 
  - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump
    support, a rework of the qoriq clock driver, device tree changes including
    qoriq fman nodes, support for a new 85xx board, and some fixes.
 
  - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x
    LocalPlus Bus FIFO with its device tree binding documentation, mpc512x
    device tree updates and some minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPEZgAAoJEFHr6jzI4aWANjYQAKX2Q/95hqKfCuF5FBcUmtMC
 Pu/Nff027MVzxZ2ApDcvvLGps5Nz2bn3nIhc9zjkXc5E8DuL6X3Yl8ce7qyNcc3g
 cJJ8RvtUo6J1OMWetXFehtPYniAAwKMhZYKnj0+WnLr2SyH/Vhl3ehDkFbGyPtuH
 r+2E7krFjfVgU+bzciIFnOaDekFuFN/pXWMb6e6zQyBJe9N8ZIp96uouGCebKVd0
 VDLItzdaKErT8JFfbymMPvZm3V0rMVx4WWu3kAbQX8LrD5a18NF1zrjAOHRXc61n
 kkk8/DPuNOon1PbXXyiS5BcFyZRe+KE3VBnoW5sOMqMIRg5WdO1oU3e2pEfXMO8+
 leXYwFLXiKzUZuOgQG2QiUhrzD2yC1o6/TJWATv0dSl9AwrecgPX+Vj6X357slAf
 A9E3eMy5tgnpndBWZmvZS3W7YDKH+NkeZ+Q40+NErAlqr++ErrTcKVndk5vWlYTT
 7mMZeTXagX66al/k5ATKqwB7iUSpnYHSAa9fcUYPSM2FnXsDxPyeJGkBbcoOmkGj
 QrpgNYOvJaUJd076goZCV39v0c1xpfV9/9kyVch8HUadf6JcjpVZwYnbGw2qlJjh
 ZanuBG2VOeSwaKQqXiRBSBetnpAg8CVpFjDmX9wOBfSek2wxEJqDX/vQExdbIDQQ
 pUs7vnUxLzhmW/x+ygOI
 =YwcM
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Kconfig: remove BE-only platforms from LE kernel build from Boqun
   Feng
 - Refresh ps3_defconfig from Geoff Levand
 - Emit GNU & SysV hashes for the vdso from Michael Ellerman
 - Define an enum for the bolted SLB indexes from Anshuman Khandual
 - Use a local to avoid multiple calls to get_slb_shadow() from Michael
   Ellerman
 - Add gettimeofday() benchmark from Michael Neuling
 - Avoid link stack corruption in __get_datapage() from Michael Neuling
 - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar
   K.V
 - Add ppc64le_defconfig from Michael Ellerman
 - pseries: extract of_helpers module from Andy Shevchenko
 - Correct string length in pseries_of_derive_parent() from Nathan
   Fontenot
 - Free the MSI bitmap if it was slab allocated from Denis Kirjanov
 - Shorten irq_chip name for the SIU from Christophe Leroy
 - Wait 1s for secondaries to enter OPAL during kexec from Samuel
   Mendoza-Jonas
 - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V
 - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from
   Colin Ian King
 - Disable hugepd for 64K page size, from Aneesh Kumar K.V
 - Differentiate between hugetlb and THP during page walk from Aneesh
   Kumar K.V
 - Make PCI non-optional for pseries from Michael Ellerman
 - Individual System V IPC system calls from Sam bobroff
 - Add selftest of unmuxed IPC calls from Michael Ellerman
 - discard .exit.data at runtime from Stephen Rothwell
 - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul
   Gortmaker
 - Use of_get_next_parent to simplify code from Christophe Jaillet
 - Paginate some xmon output from Sam bobroff
 - Add some more elements to the xmon PACA dump from Michael Ellerman
 - Allow the tm-syscall selftest to build with old headers from Michael
   Ellerman
 - Run EBB selftests only on POWER8 from Denis Kirjanov
 - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael
   Ellerman
 - Avoid reference to potentially freed memory in prom.c from Christophe
   Jaillet
 - Quieten boot wrapper output with run_cmd from Geoff Levand
 - EEH fixes and cleanups from Gavin Shan
 - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
 - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael
   Ellerman
 - Fix section mismatch warning in msi_bitmap_alloc() from Denis
   Kirjanov
 - Fix ps3-lpm white space from Rudhresh Kumar J
 - Fix ps3-vuart null dereference from Colin King
 - nvram: Add missing kfree in error path from Christophe Jaillet
 - nvram: Fix function name in some errors messages, from Christophe
   Jaillet
 - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro
   Koskinen
 - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
 - cxl: Free virtual PHB when removing from Andrew Donnellan
 - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from
   Michael Ellerman
 - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building
   with O= from Michael Ellerman
 - Freescale updates from Scott: Highlights include 64-bit book3e
   kexec/kdump support, a rework of the qoriq clock driver, device tree
   changes including qoriq fman nodes, support for a new 85xx board, and
   some fixes.
 - MPC5xxx updates from Anatolij: Highlights include a driver for
   MPC512x LocalPlus Bus FIFO with its device tree binding
   documentation, mpc512x device tree updates and some minor fixes.

* tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits)
  powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc()
  powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id()
  powerpc/pseries: Correct string length in pseries_of_derive_parent()
  powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry
  powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)
  powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan
  powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes
  powerpc: handle error case in cpm_muram_alloc()
  powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake
  powerpc/book3e-64: Enable kexec
  powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop
  powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32
  powerpc/book3e-64/kexec: Enable SMP release
  powerpc/book3e-64/kexec: create an identity TLB mapping
  powerpc/book3e-64: Don't limit paca to 256 MiB
  powerpc/book3e/kdump: Enable crash_kexec_wait_realmode
  powerpc/book3e: support CONFIG_RELOCATABLE
  powerpc/booke64: Fix args to copy_and_flush
  powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts
  powerpc/e6500: kexec: Handle hardware threads
  ...
2015-11-05 23:38:43 -08:00
Linus Torvalds
933425fb00 s390: A bunch of fixes and optimizations for interrupt and time
handling.
 
 PPC: Mostly bug fixes.
 
 ARM: No big features, but many small fixes and prerequisites including:
 - a number of fixes for the arch-timer
 - introducing proper level-triggered semantics for the arch-timers
 - a series of patches to synchronously halt a guest (prerequisite for
   IRQ forwarding)
 - some tracepoint improvements
 - a tweak for the EL2 panic handlers
 - some more VGIC cleanups getting rid of redundant state
 
 x86: quite a few changes:
 
 - support for VT-d posted interrupts (i.e. PCI devices can inject
 interrupts directly into vCPUs).  This introduces a new component (in
 virt/lib/) that connects VFIO and KVM together.  The same infrastructure
 will be used for ARM interrupt forwarding as well.
 
 - more Hyper-V features, though the main one Hyper-V synthetic interrupt
 controller will have to wait for 4.5.  These will let KVM expose Hyper-V
 devices.
 
 - nested virtualization now supports VPID (same as PCID but for vCPUs)
 which makes it quite a bit faster
 
 - for future hardware that supports NVDIMM, there is support for clflushopt,
 clwb, pcommit
 
 - support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in
 userspace, which reduces the attack surface of the hypervisor
 
 - obligatory smattering of SMM fixes
 
 - on the guest side, stable scheduler clock support was rewritten to not
 require help from the hypervisor.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJWO2IQAAoJEL/70l94x66D/K0H/3AovAgYmJQToZlimsktMk6a
 f2xhdIqfU5lIQQh5uNBCfL3o9o8H9Py1ym7aEw3fmztPHHJYc91oTatt2UEKhmEw
 VtZHp/dFHt3hwaIdXmjRPEXiYctraKCyrhaUYdWmUYkoKi7lW5OL5h+S7frG2U6u
 p/hFKnHRZfXHr6NSgIqvYkKqtnc+C0FWY696IZMzgCksOO8jB1xrxoSN3tANW3oJ
 PDV+4og0fN/Fr1capJUFEc/fejREHneANvlKrLaa8ht0qJQutoczNADUiSFLcMPG
 iHljXeDsv5eyjMtUuIL8+MPzcrIt/y4rY41ZPiKggxULrXc6H+JJL/e/zThZpXc=
 =iv2z
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "First batch of KVM changes for 4.4.

  s390:
     A bunch of fixes and optimizations for interrupt and time handling.

  PPC:
     Mostly bug fixes.

  ARM:
     No big features, but many small fixes and prerequisites including:

      - a number of fixes for the arch-timer

      - introducing proper level-triggered semantics for the arch-timers

      - a series of patches to synchronously halt a guest (prerequisite
        for IRQ forwarding)

      - some tracepoint improvements

      - a tweak for the EL2 panic handlers

      - some more VGIC cleanups getting rid of redundant state

  x86:
     Quite a few changes:

      - support for VT-d posted interrupts (i.e. PCI devices can inject
        interrupts directly into vCPUs).  This introduces a new
        component (in virt/lib/) that connects VFIO and KVM together.
        The same infrastructure will be used for ARM interrupt
        forwarding as well.

      - more Hyper-V features, though the main one Hyper-V synthetic
        interrupt controller will have to wait for 4.5.  These will let
        KVM expose Hyper-V devices.

      - nested virtualization now supports VPID (same as PCID but for
        vCPUs) which makes it quite a bit faster

      - for future hardware that supports NVDIMM, there is support for
        clflushopt, clwb, pcommit

      - support for "split irqchip", i.e.  LAPIC in kernel +
        IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
        the hypervisor

      - obligatory smattering of SMM fixes

      - on the guest side, stable scheduler clock support was rewritten
        to not require help from the hypervisor"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
  KVM: VMX: Fix commit which broke PML
  KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
  KVM: x86: allow RSM from 64-bit mode
  KVM: VMX: fix SMEP and SMAP without EPT
  KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
  KVM: device assignment: remove pointless #ifdefs
  KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
  KVM: x86: zero apic_arb_prio on reset
  drivers/hv: share Hyper-V SynIC constants with userspace
  KVM: x86: handle SMBASE as physical address in RSM
  KVM: x86: add read_phys to x86_emulate_ops
  KVM: x86: removing unused variable
  KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
  KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
  KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
  KVM: arm/arm64: Optimize away redundant LR tracking
  KVM: s390: use simple switch statement as multiplexer
  KVM: s390: drop useless newline in debugging data
  KVM: s390: SCA must not cross page boundaries
  KVM: arm: Do not indent the arguments of DECLARE_BITMAP
  ...
2015-11-05 16:26:26 -08:00
Linus Torvalds
39cf7c3981 IOMMU Updates for Linux v4.4
This time including:
 
 	* A new IOMMU driver for s390 pci devices
 
 	* Common dma-ops support based on iommu-api for ARM64. The plan is to
 	  use this as a basis for ARM32 and hopefully other architectures as
 	  well in the future.
 
 	* MSI support for ARM-SMMUv3
 
 	* Cleanups and dead code removal in the AMD IOMMU driver
 
 	* Better RMRR handling for the Intel VT-d driver
 
 	* Various other cleanups and small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJWOz7hAAoJECvwRC2XARrjbvYQALwtITTA5iTm0y/ApwNMxI7n
 pZpjZVPoBPNsGBc4t/MT8pVhUSdmpBOljbV4Y4CayL1mSSB6Bl2gooZjd66m7Z81
 qMJYEVWhFQqVsIKkCSNOgaO7W5y+xt3rTgqN6vCu86/CCDfKrTPP/+CRl1T/z9bo
 1J8ioM3KnZG9KzG8JuXYFg5wwbKToaBh6swSmj+O4U9hru7zV/ILP7ikcc9pyMji
 12WbzCqchRORsJZD65xMRYAqRaPNN/3IlDejs00TOFhY3qpWgEgFUucyeRJBJ/+q
 K4U8T5vZsnr1a04l7/BeYbLmP7y/9Qv0N0xMGtTyoy/w/BieGqRWu4hHhqf/44NO
 EhCSXcEThMNCGTjP2VWC4dnQ/s7Y8OmSW9nCreUcFVxHoE5LfDoh8RngA2fpeNuS
 ixb3OwP+YXHN9Ck+1BQqQCeBznsPTLuDxlhRjCJsWntIfMSkXebOkz83YxyZ9b0Q
 gFvptfuknU7cotUwWa3dg8RiUB8kNlKJyEEByaVpWEbEOabnONKEMkstvuBx6Ots
 kA63wbe7QcPgbUYuq7g0nijDw6E2aEtf0nx2Xx4ZDL932qjg/xUkiBpmbDXHw4Gu
 nimNXVQtbCzF74SyTvxEtupiijOTm5eHtoKtg0mYnqPZ+V9eOwEvW8IHaFFf8XHD
 SecikoTtH1Q4RVtqOcAQ
 =jLlB
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
 "This time including:

   - A new IOMMU driver for s390 pci devices

   - Common dma-ops support based on iommu-api for ARM64.  The plan is
     to use this as a basis for ARM32 and hopefully other architectures
     as well in the future.

   - MSI support for ARM-SMMUv3

   - Cleanups and dead code removal in the AMD IOMMU driver

   - Better RMRR handling for the Intel VT-d driver

   - Various other cleanups and small fixes"

* tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/vt-d: Fix return value check of parse_ioapics_under_ir()
  iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope()
  iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir
  iommu: Move default domain allocation to iommu_group_get_for_dev()
  iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev
  iommu/arm-smmu: Switch to device_group call-back
  iommu/fsl: Convert to device_group call-back
  iommu: Add device_group call-back to x86 iommu drivers
  iommu: Add generic_device_group() function
  iommu: Export and rename iommu_group_get_for_pci_dev()
  iommu: Revive device_group iommu-ops call-back
  iommu/amd: Remove find_last_devid_on_pci()
  iommu/amd: Remove first/last_device handling
  iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL
  iommu/amd: Cleanup buffer allocation
  iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu
  iommu/amd: Align DTE flag definitions
  iommu/amd: Remove old alias handling code
  iommu/amd: Set alias DTE in do_attach/do_detach
  iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled
  ...
2015-11-05 16:12:10 -08:00
Linus Torvalds
ab1228e42e Merge git://git.infradead.org/intel-iommu
Pull intel iommu updates from David Woodhouse:
 "This adds "Shared Virtual Memory" (aka PASID support) for the Intel
  IOMMU.  This allows devices to do DMA using process address space,
  translated through the normal CPU page tables for the relevant mm.

  With corresponding support added to the i915 driver, this has been
  tested with the graphics device on Skylake.  We don't have the
  required TLP support in our PCIe root ports for supporting discrete
  devices yet, so it's only integrated devices that can do it so far"

* git://git.infradead.org/intel-iommu: (23 commits)
  iommu/vt-d: Fix rwxp flags in SVM device fault callback
  iommu/vt-d: Expose struct svm_dev_ops without CONFIG_INTEL_IOMMU_SVM
  iommu/vt-d: Clean up pasid_enabled() and ecs_enabled() dependencies
  iommu/vt-d: Handle Caching Mode implementations of SVM
  iommu/vt-d: Fix SVM IOTLB flush handling
  iommu/vt-d: Use dev_err(..) in intel_svm_device_to_iommu(..)
  iommu/vt-d: fix a loop in prq_event_thread()
  iommu/vt-d: Fix IOTLB flushing for global pages
  iommu/vt-d: Fix address shifting in page request handler
  iommu/vt-d: shift wrapping bug in prq_event_thread()
  iommu/vt-d: Fix NULL pointer dereference in page request error case
  iommu/vt-d: Implement SVM_FLAG_SUPERVISOR_MODE for kernel access
  iommu/vt-d: Implement SVM_FLAG_PRIVATE_PASID to allocate unique PASIDs
  iommu/vt-d: Add callback to device driver on page faults
  iommu/vt-d: Implement page request handling
  iommu/vt-d: Generalise DMAR MSI setup to allow for page request events
  iommu/vt-d: Implement deferred invalidate for SVM
  iommu/vt-d: Add basic SVM PASID support
  iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS
  iommu/vt-d: Add initial support for PASID tables
  ...
2015-11-05 16:06:52 -08:00
Linus Torvalds
e880e87488 driver core update for 4.4-rc1
Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch of
 debugfs updates, with a smattering of minor driver core fixes and
 updates as well.
 
 All have been in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlY6ePQACgkQMUfUDdst+ymNTgCgpP0CZw57GpwF/Hp2L/lMkVeo
 Kx8AoKhEi4iqD5fdCQS9qTfomB+2/M6g
 =g7ZO
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch
  of debugfs updates, with a smattering of minor driver core fixes and
  updates as well.

  All have been in linux-next for a long time"

* tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Add debugfs_create_ulong()
  of: to support binding numa node to specified device in devicetree
  debugfs: Add read-only/write-only bool file ops
  debugfs: Add read-only/write-only size_t file ops
  debugfs: Add read-only/write-only x64 file ops
  debugfs: Consolidate file mode checks in debugfs_create_*()
  Revert "mm: Check if section present during memory block (un)registering"
  driver-core: platform: Provide helpers for multi-driver modules
  mm: Check if section present during memory block (un)registering
  devres: fix a for loop bounds check
  CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit
  base/platform: assert that dev_pm_domain callbacks are called unconditionally
  sysfs: correctly handle short reads on PREALLOC attrs.
  base: soc: siplify ida usage
  kobject: move EXPORT_SYMBOL() macros next to corresponding definitions
  kobject: explain what kobject's sd field is
  debugfs: document that debugfs_remove*() accepts NULL and error values
  debugfs: Pass bool pointer to debugfs_create_bool()
  ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-11-04 21:50:37 -08:00
Joerg Roedel
b67ad2f7c7 Merge branches 'x86/vt-d', 'arm/omap', 'arm/smmu', 's390', 'core' and 'x86/amd' into next
Conflicts:
	drivers/iommu/amd_iommu_types.h
2015-11-02 20:03:34 +09:00
Joerg Roedel
b61e5e80e3 iommu/vt-d: Fix return value check of parse_ioapics_under_ir()
The function returns 0 on success, so check for the right
value.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-11-02 19:57:31 +09:00
David Woodhouse
0bdec95ce5 iommu/vt-d: Fix rwxp flags in SVM device fault callback
This is the downside of using bitfields in the struct definition, rather
than doing all the explicit masking and shifting.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-28 15:14:09 +09:00
Linus Torvalds
858e904bd7 IOMMU Fixes for Linux v4.3-rc7
Two late fixes for the AMD IOMMU driver:
 
 	* One adds an additional check to the io page-fault handler to
 	  avoid a BUG_ON being hit in handle_mm_fault()
 
 	* Second patch fixes a problem with devices writing to the
 	  system management area and were blocked by the IOMMU because
 	  the driver wrongly cleared out the DTE flags allowing that
 	  access.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJWLeEzAAoJECvwRC2XARrjD/gQAIAihdsuv33iQQAfwvaztNOu
 l5WqQ6gr54xQXKebkY9MgiX5qXIqyNPHku08WGp63kWkfKSkTgvqQw/WNoRcpE2+
 GrMKl4EvJyvOp9S3tbtx3QNeb19wGEHyOFN6UuhNBhcXzxsqMN4c3D77upZ2N81k
 hYzYYjWNL+5NwsUtK8oZSZUwhmGr4Iuim9mJDMMGhZYw88/dQICIQQtPWc8/ritJ
 v/sBJA3KdyRvStxuba64NOWnByYXYnzyrJvBtVPMfPfFjfcyC0D0dwfXe3jvyjh3
 nDSRoXqGsd35MBwDfVIf3HUKP4Wxwd+5pbSyrTfD5b4anEFL62ifdTb6/lpMFY/X
 uo88xn9oTSMHO0TOPJw2XaBB8Y2OwW1FE7BVpa0CYFMDwQ/vaIGXAoBcxGL98a26
 O+xd+pcMVELwOT0XFS5ue7eaZZdLCooj52s1ik8tMIB2qu6lFzd4JyWA7O3LbnMU
 qT7YvZKbATjBvIaP0fHpZuZv6iyE2L9pdrvDIGeBb2TqE7r89JfRIYZcYfSvtrdA
 TwlijU/w3eMdUoDVDCSlVT9UVfFyPZNwVS1qT3iU4OeVS8MPTnM/lNnWokruAoY0
 hcbOOZ7EEtT6o/1GXyWDVaBKbAuWRNhbEEUMEBUlgPN7k9AW6dQIZDPftXwQ05tQ
 XzUgi1ueNHcw1br6PItG
 =4Bny
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "Two late fixes for the AMD IOMMU driver:

   - add an additional check to the io page-fault handler to avoid a
     BUG_ON being hit in handle_mm_fault()

   - fix a problem with devices writing to the system management area
     and were blocked by the IOMMU because the driver wrongly cleared
     out the DTE flags allowing that access"

* tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Don't clear DTE flags when modifying it
  iommu/amd: Fix BUG when faulting a PROT_NONE VMA
2015-10-27 07:44:13 +09:00
David Woodhouse
d42fde7084 iommu/vt-d: Clean up pasid_enabled() and ecs_enabled() dependencies
When booted with intel_iommu=ecs_off we were still allocating the PASID
tables even though we couldn't actually use them. We really want to make
the pasid_enabled() macro depend on ecs_enabled().

Which is unfortunate, because currently they're the other way round to
cope with the Broadwell/Skylake problems with ECS.

Instead of having ecs_enabled() depend on pasid_enabled(), which was never
something that made me happy anyway, make it depend in the normal case
on the "broken PASID" bit 28 *not* being set.

Then pasid_enabled() can depend on ecs_enabled() as it should. And we also
don't need to mess with it if we ever see an implementation that has some
features requiring ECS (like PRI) but which *doesn't* have PASID support.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-24 21:33:01 +02:00
David Woodhouse
5a10ba27d9 iommu/vt-d: Handle Caching Mode implementations of SVM
Not entirely clear why, but it seems we need to reserve PASID zero and
flush it when we make a PASID entry present.

Quite we we couldn't use the true PASID value, isn't clear.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-24 21:06:39 +02:00
Joerg Roedel
66ef950d18 iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope()
Propagate the error-value from the function ir_parse_ioapic_hpet_scope()
in parse_ioapics_under_ir() and cleanup its calling loop.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-23 12:00:54 +02:00
Baoquan He
a13c8f27e4 iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir
Adjust the return value of parse_ioapics_under_ir as
negative value representing failure and "0" representing
succcess. Just make it consistent with other function
implementations, and we can judge if calling is successfull
by if (!parse_ioapics_under_ir()) style.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-23 11:53:49 +02:00
Scott Wood
9484865447 powerpc/fsl: Move fsl_guts.h out of arch/powerpc
Freescale's Layerscape ARM chips use the same structure.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-21 18:05:50 -05:00
Joerg Roedel
1228236de5 iommu: Move default domain allocation to iommu_group_get_for_dev()
Now that the iommu core support for iommu groups is not
pci-centric anymore, we can move default domain allocation
to the bus independent iommu_group_get_for_dev() function.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
391811e185 iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev
All callers of iommu_group_get_for_dev() provide a
device_group call-back now, so this fall-back is no longer
needed.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
af65993224 iommu/arm-smmu: Switch to device_group call-back
This converts the ARM SMMU and the SMMUv3 driver to use the
new device_group call-back.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
d5e5829715 iommu/fsl: Convert to device_group call-back
Convert the fsl pamu driver to make use of the new
device_group call-back.

Cc: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
a960fadbe6 iommu: Add device_group call-back to x86 iommu drivers
Set the device_group call-back to pci_device_group() for the
Intel VT-d and the AMD IOMMU driver.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
6eab556a40 iommu: Add generic_device_group() function
This function can be used as a device_group call-back and
just allocates one iommu-group per device.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
5e62292bad iommu: Export and rename iommu_group_get_for_pci_dev()
Rename that function to pci_device_group() and export it, so
that IOMMU drivers can use it as their device_group
call-back.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:49 +02:00
Joerg Roedel
46c6b2bc88 iommu: Revive device_group iommu-ops call-back
That call-back is currently unused, change it into a
call-back function for finding the right IOMMU group for a
device.
This is a first step to remove the hard-coded PCI dependency
in the iommu-group code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-22 00:00:48 +02:00
Linus Torvalds
8a70dd2669 Merge tag 'for-linus-20151021' of git://git.infradead.org/intel-iommu
Pull intel-iommu bugfix from David Woodhouse:
 "This contains a single fix, for when the IOMMU API is used to overlay
  an existing mapping comprised of 4KiB pages, with a mapping that can
  use superpages.

  For the *first* superpage in the new mapping, we were correctly¹
  freeing the old bottom-level page table page and clearing the link to
  it, before installing the superpage.  For subsequent superpages,
  however, we weren't.  This causes a memory leak, and a warning about
  setting a PTE which is already set.

  ¹ Well, not *entirely* correctly.  We just free the page table pages
    right there and then, which is wrong.  In fact they should only be
    freed *after* the IOTLB is flushed so we know the hardware will no
    longer be looking at them....  and in fact I note that the IOTLB
    flush is completely missing from the intel_iommu_map() code path,
    although it needs to be there if it's permitted to overwrite
    existing mappings.

    Fixing those is somewhat more intrusive though, and will probably
    need to wait for 4.4 at this point"

* tag 'for-linus-20151021' of git://git.infradead.org/intel-iommu:
  iommu/vt-d: fix range computation when making room for large pages
2015-10-22 06:32:48 +09:00
Joerg Roedel
393c092a4d iommu/amd: Remove find_last_devid_on_pci()
The value read from the PCI header is not reliable, so
remove this code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:33 +02:00
Joerg Roedel
226e889b20 iommu/amd: Remove first/last_device handling
The code is buggy and the values read from PCI are not
reliable anyway, so it is the best to just remove this code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:33 +02:00
Joerg Roedel
d125941698 iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL
Also initialize the amd_iommu_last_bdf variable when a
IVHD_DEV_ALL entry is found in the ACPI table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:33 +02:00
Joerg Roedel
f2c2db53b9 iommu/amd: Cleanup buffer allocation
Clean up the functions to allocate the command, event and
ppr-log buffers. Remove redundant code and change the return
value to int.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:33 +02:00
Joerg Roedel
deba4bce16 iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu
The driver always uses a constant size for these buffers
anyway, so there is no need to waste memory to store the
sizes.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:33 +02:00
Joerg Roedel
ca9cab3a5a iommu/amd: Align DTE flag definitions
No functional change.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:32 +02:00
Joerg Roedel
61289cbaf6 iommu/amd: Remove old alias handling code
This mostly removes the code to create dev_data structures
for alias device ids. They are not necessary anymore, as
they were only created for device ids which have no struct
pci_dev associated with it.  But these device ids are
handled in a simpler way now, so there is no need for this
code anymore.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:32 +02:00
Joerg Roedel
e25bfb56ea iommu/amd: Set alias DTE in do_attach/do_detach
With this we don't have to create dev_data entries for
non-existent devices (which only exist as request-ids).

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:30:32 +02:00
Joerg Roedel
272e4f99e9 iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled
These functions rely on being called with IRQs disabled. Add
a WARN_ON to detect early when its not.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:29:27 +02:00
Joerg Roedel
f1dd0a8bcd iommu/amd: Don't disable IRQs in __detach_device
This function is already called with IRQs disabled already.
So no need to disable them again.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:29:27 +02:00
Joerg Roedel
150952f969 iommu/amd: Do not iterate over alias-list in __[attach|detach]_device
The alias list is handled aleady by iommu core code. No need
anymore to handle it in this part of the AMD IOMMU code

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:29:27 +02:00
Joerg Roedel
f34c73f55a iommu/amd: Do not BUG_ON in __detach_device()
The condition in the BUG_ON is an indicator of a BUG, but no
reason to kill the code path. Turn it into a WARN_ON and
bail out if it is hit.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:29:26 +02:00
Joerg Roedel
cbf3ccd09d iommu/amd: Don't clear DTE flags when modifying it
During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.

Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Tested-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-21 11:29:06 +02:00
David Woodhouse
5d52f482eb iommu/vt-d: Fix SVM IOTLB flush handling
Change the 'pages' parameter to 'unsigned long' to avoid overflow.

Fix the device-IOTLB flush parameter calculation — the size of the IOTLB
flush is indicated by the position of the least significant zero bit in
the address field. For example, a value of 0x12345f000 will flush from
0x123440000 to 0x12347ffff (256KiB).

Finally, the cap_pgsel_inv() is not relevant to SVM; the spec says that
*all* implementations must support page-selective invaliation for
"first-level" translations. So don't check for it.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-20 16:26:21 +01:00
Sudeep Dutt
b9997e385e iommu/vt-d: Use dev_err(..) in intel_svm_device_to_iommu(..)
This will give a little bit of assistance to those developing drivers
using SVM. It might cause a slight annoyance to end-users whose kernel
disables the IOMMU when drivers are trying to use it. But the fix there
is to fix the kernel to enable the IOMMU.

Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-19 15:03:00 +01:00
Dan Carpenter
3c7c2f3288 iommu/vt-d: fix a loop in prq_event_thread()
There is an extra semi-colon on this if statement so we always break on
the first iteration.

Fixes: 0204a49609 ('iommu/vt-d: Add callback to device driver on page faults')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-10-18 15:26:04 +01:00