Commit Graph

14465 Commits

Author SHA1 Message Date
Mike Isely
e61b6fc58b V4L/DVB (4337): Refine dead code elimination in pvrusb2
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:24 -03:00
Oliver Endriss
32e4c3a562 V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA start/stop code
Fix bug reported by Andrew de Quincey:
After cold boot the saa7146 DMA did not start if the demuxer was opened
before the frontend has locked to the signal.
DMA transfers will be started now if (and only if)
the frontend is locked and data should be sent to the demuxer.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:23 -03:00
Michael Krufky
3117beec7e V4L/DVB (4316): Check __must_check warnings
Check __must_check warnings for class_device_register and class_device_create_file

video_device_create_file was declared as a void, but instead should
return the int value of class_device_create_file.

Move the check from bttv-driver.c into v4l2-dev.h, because all other
callers of video_device_create_file must also be checked.

Replace the call to class_device_create_file in videodev.c with
video_device_create_file, as defined in v4l2-dev.h, so that the
return value of class_device_create_file will be checked.

Check the return value of class_device_register in videodev.c and
pvrusb2-sysfs.c

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:21 -03:00
Michael Krufky
d9cd2d9b61 V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog mode
With the LG H06xF tuners, an auxiliary byte must be sent after the
standard four-byte i2c sequence. The code that does this is currently in
the wrong place, causing random bytes to be written to the tuner over
i2c in the set_type function.
This patch moves this code from set_type to default_set_tv_freq.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:20 -03:00
Ricardo Cerqueira
a62c61d382 V4L/DVB (4313): Bugfix for keycode calculation on NPG remotes
Fix keycode calculations (all codes for this remote were wrong due to a
lost + sign)

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:19 -03:00
Adrian Bunk
7845701820 V4L/DVB (4310): Saa7134: rename dmasound_{init, exit}
Two different exports with the same name are not a good idea:
$ grep -r EXPORT_SYMBOL\(dmasound_init\) *
drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init);
sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init);
$ 
This patch renames the saa7134 dmasound_{init,exit} to 
saa7134_dmasound_{init,exit}.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:18 -03:00
Hartmut Hackmann
d5fdd1354e V4L/DVB (4306): Support non interlaced capture by default for saa713x
This patch just sets the option noninterlaced to 1 by default since
it has no known disadvantages. It is still possibe to get the old
behaviour by setting noninterlaced=0.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:16 -03:00
Randy Dunlap
c526e224e4 V4L/DVB (4298): Check all __must_check warnings in bttv.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:15 -03:00
Andrew de Quincey
6ba475042f V4L/DVB (4296): Remove stradis MODULE_DEVICE_INFO definition
To prevent autoloading of the driver, as it then conflicts with every other
saa7146 device in existence.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:14 -03:00
Marco Schluessler
6a85774741 V4L/DVB (4295): Fix typo in comment for TDA9819
Fix typo in comment for TDA9819

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:12 -03:00
Andrew de Quincey
93e2b1ae97 V4L/DVB (4294): Fix broken tda665x PLL definition.
It was pointed out on the mailing list that this PLL definition is broken. I
went back to the original dibusb driver and confirmed it used to use these
settings, as well as consulting the datasheet.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:11 -03:00
Andrew de Quincey
f281309381 V4L/DVB (4293): Fix unstable DISEQC behaviour on budget cards.
Use the stv0299 native DISEQC implementation instead of the bitbanging one
as required by the ves1893. This was originally found by Oliver Endriss.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:10 -03:00
Andrew de Quincey
04c56d0e5b V4L/DVB (4292): Fix DISEQC regression
The changes to add frontend reinitialisation moved the position where the
init() op is called into the frontend thread. Unfortunately, since DISEQC
operations do not use the frontend thread, this meant that DISEQC could be
called against an uninitalised frontend, leading to all sorts of trouble.
Patch fixes this by reinstating the original fronted intialisation call.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:09 -03:00
Andrew de Quincey
061b623c54 V4L/DVB (4291): Add dvbpll i2c device check.
Some cards have multiple possible addresses for their PLLs, with no other
way to tell if a PLL is present or not apart from probing to see if an i2c
device is present. This adds a quick check to see if an i2c device is
present at the given i2c address.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:07 -03:00
Linus Torvalds
dc710afe95 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] sata_promise: comment out duplicate PCI ID
  [PATCH] libata: improve EH action and EHI flag handling
  [PATCH] libata: fix eh_skip_recovery condition
  [PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling
2006-07-28 22:47:44 -07:00
Jeff Garzik
ab3b3fd381 Merge branch 'master' into upstream-fixes 2006-07-29 01:39:17 -04:00
Jeff Garzik
4da3dcf346 Merge branch 'upstream' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes 2006-07-29 01:26:51 -04:00
Stephen Hemminger
187ff3b857 [PATCH] skge: chip clock rate typo
Okay, Fix both typo's in one patch .The impact is that the incorrect value
was being computed for blinking LED and interrupt moderation values.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:23:51 -04:00
Brice Goglin
9a71db721a [PATCH] myri10ge - Always do a dummy RDMA after loading the firmware
Always do a dummy RDMA after loading the firmware to work around
buggy PCIe chipsets which do not implement resending properly.
This is so cheap as to be almost free, and should never have been
conditional on the tx boundary != 4096.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:23:51 -04:00
Jeff Garzik
5b84b6fa9b Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2006-07-29 00:32:29 -04:00
Linus Torvalds
5d2edfe004 Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration
  [S390] duplicate ccw devices in ccwgroup.
  [S390] permanent subchannel busy conditions may cause I/O stall
2006-07-28 19:25:02 -07:00
Linus Torvalds
9d22e6d7ad Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SUNLANCE]: fix compilation on sparc-UP
  [SPARC]: Defer clock_probe to fs_initcall()
  [SPARC64]: Fix typo in pgprot_noncached().
  [SPARC64]: Fix quad-float multiply emulation.
2006-07-28 19:24:38 -07:00
Alexey Dobriyan
93853fd0d4 [SUNLANCE]: fix compilation on sparc-UP
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-28 01:09:40 -07:00
Jens Axboe
a75ad3c27a [PATCH] scsi: kill overeager "not-ready" messages
HAL and friends have a tendency to trigger this one all the time.
It's not really interesting, so kill it. The vendor kernels all do
anyways.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-28 09:04:09 +02:00
Jens Axboe
71ef51cc17 [PATCH] it821x: fix ide dma setup bug
Only enable dma for a valid speed setting.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-28 09:02:17 +02:00
Jens Axboe
0a8348d086 [PATCH] ide: if the id fields looks screwy, disable DMA
It's the safer choice. Originally due to a bug in itx821x, but a
generally sound thing to do.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-28 08:58:26 +02:00
Jens Axboe
361934849e [PATCH] ide: option to disable cache flushes for buggy drives
Some drives claim they support cache flushing, but get seriously
confused if you try. Add this option to be able to boot with
barriers enabled by default.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-28 08:54:59 +02:00
Dan Williams
fe397d469f [PATCH] orinoco: fix setting transmit key only
When determining whether there's a key to set or not, orinoco should be
looking at the key length, not the key data.  Otherwise confusion reigns
when trying to set TX key only, passing in zero-length key, but non-NULL
pointer.  Key length takes precedence over non-NULL key data.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:31 -04:00
Daniel Drake
345f6b8beb [PATCH] softmac: do shared key auth in workqueue
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked
it down to a problem with the new shared key auth code (recursive
calls into the driver)

This patch (effectively Michael's patch with a couple of small
modifications) solves the problem by sending the authentication
challenge response frame from a workqueue entry.

I also removed a lone \n from the bcm43xx messages relating to
authentication mode - this small change was previously discussed but
not patched in.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Robert Schulze
8fa9ea18e8 [PATCH] airo: should select crypto_aes
The driver airo (for Cisco Wlan-Cards) complains about "failed to load
transform for AES", when it is loaded and CRYPTO_AES is not selected
in Kconfig.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Pavel Machek
d91928e906 [PATCH] zd1201: workaround interference problem
zd1201 has nasty tendency to emit magicall anti-wifi cloud when it is
inserted into slot, but not used.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Cornelia Huck
1708822984 [S390] duplicate ccw devices in ccwgroup.
Fail to create a ccwgroup device if a ccw device is passed in twice.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-27 14:00:33 +02:00
Peter Oberparleiter
ba4ba8a69d [S390] permanent subchannel busy conditions may cause I/O stall
In special conditions where a subchannel rejects the HALT I/O-
instruction with a busy indication (cc 2), I/O may stall.
I/O request termination logic retries HALT I/O indefinitely
because it expects HALT I/O to alter the subchannel status which
is not true when cc 2 is returned.
In case of a busy indication, try CLEAR I/O instruction immediately.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-27 14:00:23 +02:00
Christoph Hellwig
64821324ca [PATCH] fix compile regression for a few scsi drivers
This fixes three drivers to compile again after my patch that removes
the data_cmnd member from struct scsi_cmnd.

The fas216 change is trivial, it should have been using ->cmnd all the
time.

NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing
something odd, it should only have looked at ->cmnd before not the saved
copy that is kept for the error handlers sake.  Note that it really
should deal with the sync setting themselves but use the generic domain
validation code that get this right - but that's for later let's push
this simple compile fix for now.

And sorry for the late fix for this, I have been busy with OLS and
associated activities last week.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-26 07:30:45 -07:00
Linus Torvalds
dab5025ca2 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SCSI] esp: Fix build.
  [SPARC]: Fix SA_STATIC_ALLOC value.
  [SPARC64]: Explicitly print return PC when the kernel fault PC is bogus.
2006-07-26 07:22:36 -07:00
Linus Torvalds
761a126017 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4/IPV6]: Setting 0 for unused port field in RAW IP recvmsg().
  [IPV4] ipmr: ip multicast route bug fix.
  [TG3]: Update version and reldate
  [TG3]: Handle tg3_init_rings() failures
  [TG3]: Add tg3_restart_hw()
  [IPV4]: Clear the whole IPCB, this clears also IPCB(skb)->flags.
  [IPV6]: Clean skb cb on IPv6 input.
  [NETFILTER]: Demote xt_sctp to EXPERIMENTAL
  [NETFILTER]: bridge netfilter: add deferred output hooks to feature-removal-schedule
  [NETFILTER]: xt_pkttype: fix mismatches on locally generated packets
  [NETFILTER]: SNMP NAT: fix byteorder confusion
  [NETFILTER]: conntrack: fix SYSCTL=n compile
  [NETFILTER]: nf_queue: handle NF_STOP and unknown verdicts in nf_reinject
  [NETFILTER]: H.323 helper: fix possible NULL-ptr dereference
2006-07-26 07:22:10 -07:00
Arjan van de Ven
153d7f3fca [PATCH] Reorganize the cpufreq cpu hotplug locking to not be totally bizare
The patch below moves the cpu hotplugging higher up in the cpufreq
layering; this is needed to avoid recursive taking of the cpu hotplug
lock and to otherwise detangle the mess.

The new rules are:
1. you must do lock_cpu_hotplug() around the following functions:
   __cpufreq_driver_target
   __cpufreq_governor (for CPUFREQ_GOV_LIMITS operation only)
   __cpufreq_set_policy
2. governer methods (.governer) must NOT take the lock_cpu_hotplug()
   lock in any way; they are called with the lock taken already
3. if your governer spawns a thread that does things, like calling
   __cpufreq_driver_target, your thread must honor rule #1.
4. the policy lock and other cpufreq internal locks nest within
   the lock_cpu_hotplug() lock.

I'm not entirely happy about how the __cpufreq_governor rule ended up
(conditional locking rule depending on the argument) but basically all
callers pass this as a constant so it's not too horrible.

The patch also removes the cpufreq_governor() function since during the
locking audit it turned out to be entirely unused (so no need to fix it)

The patch works on my testbox, but it could use more testing
(otoh... it can't be much worse than the current code)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-26 07:21:40 -07:00
Michael Chan
b6e77a5346 [TG3]: Update version and reldate
Update version to 3.63.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25 16:39:12 -07:00
Michael Chan
32d8c5724b [TG3]: Handle tg3_init_rings() failures
Handle dev_alloc_skb() failures when initializing the RX rings.
Without proper handling, the driver will crash when using a partial
ring.

Thanks to Stephane Doyon <sdoyon@max-t.com> for reporting the bug and
providing the initial patch.

Howie Xu <howie@vmware.com> also reported the same issue.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25 16:38:29 -07:00
Michael Chan
b9ec6c1b91 [TG3]: Add tg3_restart_hw()
Add tg3_restart_hw() to handle failures when re-initializing the
device.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25 16:37:27 -07:00
Jens Axboe
7b30f09245 [PATCH] cciss: fix stall with softirq handling and CFQ
We need to postpone the queue startup until after the softirq
handler has actually finished some requests, otherwise we could
be racing with cciss_softirq_done() and not actually restart
the queue handling.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-25 15:02:48 +02:00
David S. Miller
6bc063d414 [SCSI] esp: Fix build.
The data_cmd[] member got deleted, so do not use it any more.  Scsi
commands do not have their ->cmd[] overwritten temporary to probe for
status after an error before retrying.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:47:14 -07:00
Marcel Holtmann
e9e9290f5c [Bluetooth] Enable SCO support for Broadcom HID proxy dongle
The Broadcom dongles with HID proxy support actually support SCO over
HCI if the SCO buffer size values are corrected. So instead of disabling
the SCO support, mark this dongle with the quirk for the Bluetooth core
to correct the wrong buffer size values.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:34 -07:00
Marcel Holtmann
8e4f7230a3 [Bluetooth] Add quirk for another broken RTX Telecom based dongle
This patch disables the ISOC transfers for another broken RTX Telecom
based USB dongle. Starting the USB ISOC transfers only ends in a burst
of error messages for invalid SCO packets on connection handle 0.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:32 -07:00
Marcel Holtmann
ea9727f6e5 [Bluetooth] Correct SCO buffer size for Belkin devices
The Belkin F8T012 and F8T013 devices are both based on a Bluetooth chip
from Broadcom and their SCO buffer size values are wrong. The Bluetooth
core should correct these values.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:30 -07:00
Marcel Holtmann
520ca78acc [Bluetooth] Correct SCO buffer size for another Broadcom chip
The SCO buffer size values on IBM/Lenovo ThinkPad laptops with a
Bluetooth chip from Broadcom are wrong. The USB Bluetooth driver
has to set a quirk to correct the SCO buffer size values.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:27 -07:00
Roland Dreier
8fdf679fdb IB/mthca: Initialize max_cmds before debug code prints it
Read the max_cmds value from the response to the QUERY_FW command
before printing out the value, so that the real value goes into the
debug output.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:36:50 -07:00
Michael S. Tsirkin
8a7f752125 IB/ipoib: Fix packet loss after hardware address update
The neighbour ha field may get updated without destroying the
neighbour.  In this case, the ha field gets out of sync with the
address handle stored in ipoib_neigh->ah, with the result that
the ah field would point to an incorrect path, resulting in all
packets being lost.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:18:07 -07:00
Or Gerlitz
624d01f899 IB/ipoib: Fix oops with ipoib_debug_mcast set
Need to set mcast->ah before debug code dereferences it.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:18:07 -07:00
Sean Hefty
2527e681fd IB/mad: Validate MADs for spec compliance
Validate MADs sent by userspace clients for spec compliance with
C13-18.1.1 (prevent duplicate requests and responses sent on the
same port).  Without this, RMPP transactions get aborted because
of duplicate packets.

This patch is similar to that provided by Jack Morgenstein.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24 09:18:07 -07:00