As NMIs can also cause latency when interrupts are disabled, the hwlat
detectory has no way to know if the latency it detects is from an NMI or an
SMI or some other hardware glitch.
As ftrace_nmi_enter/exit() funtions are no longer used (except for sh, which
isn't supported anymore), I converted those to "arch_ftrace_nmi_enter/exit"
and use ftrace_nmi_enter/exit() to check if hwlat detector is tracing or
not, and if so, it calls into the hwlat utility.
Since the hwlat detector only has a single kthread that is spinning with
interrupts disabled, it marks what CPU it is on, and if the NMI callback
happens on that CPU, it records the time spent in that NMI. This is added to
the output that is generated by the hwlat detector as:
#3 inner/outer(us): 9/9 ts:1470836488.206734548
#4 inner/outer(us): 0/8 ts:1470836497.140808588
#5 inner/outer(us): 0/6 ts:1470836499.140825168 nmi-total:5 nmi-count:1
#6 inner/outer(us): 9/9 ts:1470836501.140841748
All time is still tracked in microseconds.
The NMI information is only shown when an NMI occurred during the sample.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The hardware latency tracer has been in the PREEMPT_RT patch for some time.
It is used to detect possible SMIs or any other hardware interruptions that
the kernel is unaware of. Note, NMIs may also be detected, but that may be
good to note as well.
The logic is pretty simple. It simply creates a thread that spins on a
single CPU for a specified amount of time (width) within a periodic window
(window). These numbers may be adjusted by their cooresponding names in
/sys/kernel/tracing/hwlat_detector/
The defaults are window = 1000000 us (1 second)
width = 500000 us (1/2 second)
The loop consists of:
t1 = trace_clock_local();
t2 = trace_clock_local();
Where trace_clock_local() is a variant of sched_clock().
The difference of t2 - t1 is recorded as the "inner" timestamp and also the
timestamp t1 - prev_t2 is recorded as the "outer" timestamp. If either of
these differences are greater than the time denoted in
/sys/kernel/tracing/tracing_thresh then it records the event.
When this tracer is started, and tracing_thresh is zero, it changes to the
default threshold of 10 us.
The hwlat tracer in the PREEMPT_RT patch was originally written by
Jon Masters. I have modified it quite a bit and turned it into a
tracer.
Based-on-code-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently ftrace_graph_ent{,_entry} and ftrace_graph_ret{,_entry} struct
can have padding bytes at the end due to alignment in 64-bit data type.
As these data are recorded so frequently, those paddings waste
non-negligible space. As the ring buffer maintains alignment properly
for each architecture, just to remove the extra padding using 'packed'
attribute.
ftrace_graph_ent_entry: 24 -> 20
ftrace_graph_ret_entry: 48 -> 44
Also I moved the 'overrun' field in struct ftrace_graph_ret to minimize
the padding in the middle.
Tested on x86_64 only.
Link: http://lkml.kernel.org/r/1467197808-13578-1-git-send-email-namhyung@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.
Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.
Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.
Also fixed up the F_printk()s for the ftrace internal bprint and print events.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.
Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.
Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.
Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.
Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.
For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-6-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.
It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.
Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.
So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch rebase the implementation of the breakpoints API on top of
perf events instances.
Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..
The new layering is now made as follows:
ptrace kgdb ftrace perf syscall
\ | / /
\ | / /
/
Core breakpoint API /
/
| /
| /
Breakpoints perf events
|
|
Breakpoints PMU ---- Debug Register constraints handling
(Part of core breakpoint API)
|
|
Hardware debug registers
Reasons of this rewrite:
- Use the centralized/optimized pmu registers scheduling,
implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
events, exclusive/non-exclusive, tunable period, etc...)
Impact:
- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
thread breakpoints references.
Todo (in the order):
- Support breakpoints perf counter events for perf tools (ie: implement
perf_bpcounter_event())
- Support from perf tools
Changes in v2:
- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
perf_event_attr.
- Separate core and arch specific headers, drop
asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch
Changes in v3:
- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
changes to kvm when we exit the guest and restore the bp registers
to the host.
Changes in v4:
- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
module
- Restore the breakpoints unconditionally on kvm guest exit:
TIF_DEBUG_THREAD doesn't anymore cover every cases of running
breakpoints and vcpu->arch.switch_db_regs might not always be
set when the guest used debug registers.
(Waiting for a reliable optimization)
Changes in v5:
- Split-up the asm-generic/hw-breakpoint.h moving to
linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
to host. We only want to restore the state if we have active
breakpoints to the host, otherwise we don't care about messed-up
address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c
Changes in v6:
- Fix wrong header inclusion in trace.h (triggered a build
error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Conflicts:
kernel/Makefile
kernel/trace/Makefile
kernel/trace/trace.h
samples/Makefile
Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".
This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I found some typos in F_printk(), so I wrote compile-time check
for it, and triggered some compile errors and warnings.
I've fixed them on x86_32, but I have no x86_64 in my hand, so there
may still be some compile warnings on 64bits.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF60B.5070407@cn.fujitsu.com>
[ tested on x86_64, and works fine ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some of the internal ftrace structures use structures within. The
output of a field saying it is just a structure is useless for a format
file. A binary reader of the ring buffer needs to know more about
how the fields are broken up.
This patch adds to the ftrace structure macros new fields to
describe the structures inside a structure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries used by ftrace internal code (plugins) currently have their
formats manually exported to userspace. That is, the format files in
debugfs/tracing/events/ftrace/*/format are currently created by hand.
This is a maintenance nightmare, and can easily become out of sync
with what is actually shown.
This patch uses the methodology of the TRACE_EVENT macros to build
the structures so that their formats can be automated and this
will keep the structures in sync with what users can see.
This patch only changes the way the structures are created. Further
patches will build off of this to automate the format files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
