Commit 0c59b89c81 ("mm: memcg: push down PageSwapCache check into
uncharge entry functions") added a VM_BUG_ON() on PageSwapCache in the
uncharge path after checking that page flag once, assuming that the
state is stable in all paths, but this is not the case and the condition
triggers in user environments. An uncharge after the last page table
reference to the page goes away can race with reclaim adding the page to
swap cache.
Swap cache pages are usually uncharged when they are freed after
swapout, from a path that also handles swap usage accounting and memcg
lifetime management. However, since the last page table reference is
gone and thus no references to the swap slot left, the swap slot will be
freed shortly when reclaim attempts to write the page to disk. The
whole swap accounting is not even necessary.
So while the race condition for which this VM_BUG_ON was added is real
and actually existed all along, there are no negative effects. Remove
the VM_BUG_ON again.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This exports the amount of anonymous transparent hugepages for each
memcg via the new "rss_huge" stat in memory.stat. The units are in
bytes.
This is helpful to determine the hugepage utilization for individual
jobs on the system in comparison to rss and opportunities where
MADV_HUGEPAGE may be helpful.
The amount of anonymous transparent hugepages is also included in "rss"
for backwards compatibility.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup updates from Tejun Heo:
- Fixes and a lot of cleanups. Locking cleanup is finally complete.
cgroup_mutex is no longer exposed to individual controlelrs which
used to cause nasty deadlock issues. Li fixed and cleaned up quite a
bit including long standing ones like racy cgroup_path().
- device cgroup now supports proper hierarchy thanks to Aristeu.
- perf_event cgroup now supports proper hierarchy.
- A new mount option "__DEVEL__sane_behavior" is added. As indicated
by the name, this option is to be used for development only at this
point and generates a warning message when used. Unfortunately,
cgroup interface currently has too many brekages and inconsistencies
to implement a consistent and unified hierarchy on top. The new flag
is used to collect the behavior changes which are necessary to
implement consistent unified hierarchy. It's likely that this flag
won't be used verbatim when it becomes ready but will be enabled
implicitly along with unified hierarchy.
The option currently disables some of broken behaviors in cgroup core
and also .use_hierarchy switch in memcg (will be routed through -mm),
which can be used to make very unusual hierarchy where nesting is
partially honored. It will also be used to implement hierarchy
support for blk-throttle which would be impossible otherwise without
introducing a full separate set of control knobs.
This is essentially versioning of interface which isn't very nice but
at this point I can't see any other options which would allow keeping
the interface the same while moving towards hierarchy behavior which
is at least somewhat sane. The planned unified hierarchy is likely
to require some level of adaptation from userland anyway, so I think
it'd be best to take the chance and update the interface such that
it's supportable in the long term.
Maintaining the existing interface does complicate cgroup core but
shouldn't put too much strain on individual controllers and I think
it'd be manageable for the foreseeable future. Maybe we'll be able
to drop it in a decade.
Fix up conflicts (including a semantic one adding a new #include to ppc
that was uncovered by header the file changes) as per Tejun.
* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits)
cpuset: fix compile warning when CONFIG_SMP=n
cpuset: fix cpu hotplug vs rebuild_sched_domains() race
cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn()
cgroup: restore the call to eventfd->poll()
cgroup: fix use-after-free when umounting cgroupfs
cgroup: fix broken file xattrs
devcg: remove parent_cgroup.
memcg: force use_hierarchy if sane_behavior
cgroup: remove cgrp->top_cgroup
cgroup: introduce sane_behavior mount option
move cgroupfs_root to include/linux/cgroup.h
cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix
cgroup: make cgroup_path() not print double slashes
Revert "cgroup: remove bind() method from cgroup_subsys."
perf: make perf_event cgroup hierarchical
cgroup: implement cgroup_is_descendant()
cgroup: make sure parent won't be destroyed before its children
cgroup: remove bind() method from cgroup_subsys.
devcg: remove broken_hierarchy tag
cgroup: remove cgroup_lock_is_held()
...
The memcg is not referenced, so it can be destroyed at anytime right
after we exit rcu read section, so it's not safe to access it.
To fix this, we call css_tryget() to get a reference while we're still
in rcu read section.
This also removes a bogus comment above __memcg_create_cache_enqueue().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A memcg may livelock when oom if the process that grabs the hierarchy's
oom lock is never the first process with PF_EXITING set in the memcg's
task iteration.
The oom killer, both global and memcg, will defer if it finds an
eligible process that is in the process of exiting and it is not being
ptraced. The idea is to allow it to exit without using memory reserves
before needlessly killing another process.
This normally works fine except in the memcg case with a large number of
threads attached to the oom memcg. In this case, the memcg oom killer
only gets called for the process that grabs the hierarchy's oom lock;
all others end up blocked on the memcg's oom waitqueue. Thus, if the
process that grabs the hierarchy's oom lock is never the first
PF_EXITING process in the memcg's task iteration, the oom killer is
constantly deferred without anything making progress.
The fix is to give PF_EXITING processes access to memory reserves so
that we've marked them as oom killed without any iteration. This allows
__mem_cgroup_try_charge() to succeed so that the process may exit. This
makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
immediately granted for processes with pending SIGKILLs and those in the
exit path, to be equivalent to what is done for the global oom killer.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This might cause a use-after-free bug.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With this patch userland applications that want to maintain the
interactivity/memory allocation cost can use the pressure level
notifications. The levels are defined like this:
The "low" level means that the system is reclaiming memory for new
allocations. Monitoring this reclaiming activity might be useful for
maintaining cache level. Upon notification, the program (typically
"Activity Manager") might analyze vmstat and act in advance (i.e.
prematurely shutdown unimportant services).
The "medium" level means that the system is experiencing medium memory
pressure, the system might be making swap, paging out active file
caches, etc. Upon this event applications may decide to further analyze
vmstat/zoneinfo/memcg or internal memory usage statistics and free any
resources that can be easily reconstructed or re-read from a disk.
The "critical" level means that the system is actively thrashing, it is
about to out of memory (OOM) or even the in-kernel OOM killer is on its
way to trigger. Applications should do whatever they can to help the
system. It might be too late to consult with vmstat or any other
statistics, so it's advisable to take an immediate action.
The events are propagated upward until the event is handled, i.e. the
events are not pass-through. Here is what this means: for example you
have three cgroups: A->B->C. Now you set up an event listener on
cgroups A, B and C, and suppose group C experiences some pressure. In
this situation, only group C will receive the notification, i.e. groups
A and B will not receive it. This is done to avoid excessive
"broadcasting" of messages, which disturbs the system and which is
especially bad if we are low on memory or thrashing. So, organize the
cgroups wisely, or propagate the events manually (or, ask us to
implement the pass-through events, explaining why would you need them.)
Performance wise, the memory pressure notifications feature itself is
lightweight and does not require much of bookkeeping, in contrast to the
rest of memcg features. Unfortunately, as of current memcg
implementation, pages accounting is an inseparable part and cannot be
turned off. The good news is that there are some efforts[1] to improve
the situation; plus, implementing the same, fully API-compatible[2]
interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable
option, so it will not require any changes on the userland side.
[1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291
[2] http://lkml.org/lkml/2013/2/21/454
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings]
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just a trivial issue I stumbled on while doing something else...
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 2d11085e40 ("memcg: do not create memsw files if swap
accounting is disabled") memsw files are created only if memcg swap
accounting is enabled so it doesn't make any sense to check for it
explicitly in mem_cgroup_read(), mem_cgroup_write() and
mem_cgroup_reset().
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup_iter basically does two things currently. It takes care of
the house keeping (reference counting, raclaim cookie) and it iterates
through a hierarchy tree (by using cgroup generic tree walk). The code
would be much more easier to follow if we move the iteration outside of
the function (to __mem_cgrou_iter_next) so the distinction is more
clear. This patch doesn't introduce any functional changes.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation of mem_cgroup_iter has to consider both css
and memcg to find out whether no group has been found (css==NULL - aka
the loop is completed) and that no memcg is associated with the found
node (!memcg - aka css_tryget failed because the group is no longer
alive). This leads to awkward tweaks like tests for css && !memcg to
skip the current node.
It will be much easier if we got rid off css variable altogether and
only rely on memcg. In order to do that the iteration part has to skip
dead nodes. This sounds natural to me and as a nice side effect we will
get a simple invariant that memcg is always alive when non-NULL and all
nodes have been visited otherwise.
We could get rid of the surrounding while loop but keep it in for now to
make review easier. It will go away in the following patch.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the per-node-zone-priority iterator caches memory cgroups
rather than their css ids we have to be careful and remove them from the
iterator when they are on the way out otherwise they might live for
unbounded amount of time even though their group is already gone (until
the global/targeted reclaim triggers the zone under priority to find out
the group is dead and let it to find the final rest).
We can fix this issue by relaxing rules for the last_visited memcg.
Instead of taking a reference to the css before it is stored into
iter->last_visited we can just store its pointer and track the number of
removed groups from each memcg's subhierarchy.
This number would be stored into iterator everytime when a memcg is
cached. If the iter count doesn't match the curent walker root's one we
will start from the root again. The group counter is incremented
upwards the hierarchy every time a group is removed.
The iter_lock can be dropped because racing iterators cannot leak the
reference anymore as the reference count is not elevated for
last_visited when it is cached.
Locking rules got a bit complicated by this change though. The iterator
primarily relies on rcu read lock which makes sure that once we see a
valid last_visited pointer then it will be valid for the whole RCU walk.
smp_rmb makes sure that dead_count is read before last_visited and
last_dead_count while smp_wmb makes sure that last_visited is updated
before last_dead_count so the up-to-date last_dead_count cannot point to
an outdated last_visited. css_tryget then makes sure that the
last_visited is still alive in case the iteration races with the cached
group removal (css is invalidated before mem_cgroup_css_offline
increments dead_count).
In short:
mem_cgroup_iter
rcu_read_lock()
dead_count = atomic_read(parent->dead_count)
smp_rmb()
if (dead_count != iter->last_dead_count)
last_visited POSSIBLY INVALID -> last_visited = NULL
if (!css_tryget(iter->last_visited))
last_visited DEAD -> last_visited = NULL
next = find_next(last_visited)
css_tryget(next)
css_put(last_visited) // css would be invalidated and parent->dead_count
// incremented if this was the last reference
iter->last_visited = next
smp_wmb()
iter->last_dead_count = dead_count
rcu_read_unlock()
cgroup_rmdir
cgroup_destroy_locked
atomic_add(CSS_DEACT_BIAS, &css->refcnt) // subsequent css_tryget fail
mem_cgroup_css_offline
mem_cgroup_invalidate_reclaim_iterators
while(parent = parent_mem_cgroup)
atomic_inc(parent->dead_count)
css_put(css) // last reference held by cgroup core
Spotted by Ying Han.
Original idea from Johannes Weiner.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup_iter curently relies on css->id when walking down a group
hierarchy tree. This is really awkward because the tree walk depends on
the groups creation ordering. The only guarantee is that a parent node is
visited before its children.
Example:
1) mkdir -p a a/d a/b/c
2) mkdir -a a/b/c a/d
Will create the same trees but the tree walks will be different:
1) a, d, b, c
2) a, b, c, d
Commit 574bd9f7c7 ("cgroup: implement generic child / descendant walk
macros") has introduced generic cgroup tree walkers which provide either
pre-order or post-order tree walk. This patch converts css->id based
iteration to pre-order tree walk to keep the semantic with the original
iterator where parent is always visited before its subtree.
cgroup_for_each_descendant_pre suggests using post_create and
pre_destroy for proper synchronization with groups addidition resp.
removal. This implementation doesn't use those because a new memory
cgroup is initialized sufficiently for iteration in mem_cgroup_css_alloc
already and css reference counting enforces that the group is alive for
both the last seen cgroup and the found one resp. it signals that the
group is dead and it should be skipped.
If the reclaim cookie is used we need to store the last visited group
into the iterator so we have to be careful that it doesn't disappear in
the mean time. Elevated reference count on the css keeps it alive even
though the group have been removed (parked waiting for the last dput so
that it can be freed).
Per node-zone-prio iter_lock has been introduced to ensure that
css_tryget and iter->last_visited is set atomically. Otherwise two
racing walkers could both take a references and only one release it
leading to a css leak (which pins cgroup dentry).
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patchset tries to make mem_cgroup_iter saner in the way how it walks
hierarchies. css->id based traversal is far from being ideal as it is not
deterministic because it depends on the creation ordering. Additional to
that css_id is considered a burden for cgroup maintainers because it is
quite some code and memcg is the last user of it. After this series only
the swap accounting uses css_id but that one will follow up later.
Diffstat (if we exclude removed/added comments) looks quite
promising. We got rid of some code:
$ git diff mmotm... | grep -v "^[+-][[:space:]]*[/ ]\*" | diffstat
b/include/linux/cgroup.h | 3 ---
kernel/cgroup.c | 33 ---------------------------------
mm/memcontrol.c | 4 +++-
3 files changed, 3 insertions(+), 37 deletions(-)
The first patch is just preparatory and it changes when we release css of
the previously returned memcg. Nothing controlversial.
The second patch is the core of the patchset and it replaces css_get_next
based on css_id by the generic cgroup pre-order. This brings some
chalanges for the last visited group caching during the reclaim
(mem_cgroup_per_zone::reclaim_iter). We have to use memcg pointers
directly now which means that we have to keep a reference to those groups'
css to keep them alive.
I also folded iter_lock introduced by https://lkml.org/lkml/2013/1/3/295
in the previous version into this patch. Johannes felt the race I was
describing should be mostly harmless and I haven't been able to trigger it
so the lock doesn't deserve its own patch. It is still needed
temporarily, though, because the reference counting on iter->last_visited
depends on it. It will go away with the next patch.
The next patch fixups an unbounded cgroup removal holdoff caused by the
elevated css refcount. The issue has been observed by Ying Han. Johannes
wasn't impressed by the previous version of the fix
(https://lkml.org/lkml/2013/2/8/379) which cleaned up pending references
during mem_cgroup_css_offline when a group is removed. He has suggested a
different way when the iterator checks whether a cached memcg is still
valid or no. More on that in the patch but the basic idea is that every
memcg tracks the number removed subgroups and iterator records this number
when a group is cached. These numbers are checked before
iter->last_visited is about to be used and the iteration is restarted if
it is invalid.
The fourth and fifth patches are an attempt for simplification of the
mem_cgroup_iter. css juggling is removed and the iteration logic is moved
to a helper so that the reference counting and iteration are separated.
The last patch just removes css_get_next as there is no user for it any
longer.
My testing looked as follows:
A (use_hierarchy=1, limit_in_bytes=150M)
/|\
1 2 3
Children groups were created so that the number is never higher than 3 and
their limits were random between 50-100M. Each group hosts a kernel build
(starting with tar -xf so the tree is not shared and make -jNUM_CPUs/3)
and terminated after random time - up to 5 minutes) and then it is
removed.
This should exercise both leaf and hierarchical reclaim as well as races
with cgroup removals and debugging messages I added on top proved that.
100 groups were created during the test.
This patch:
css reference counting keeps the cgroup alive even though it has been
already removed. mem_cgroup_iter relies on this fact and takes a
reference to the returned group. The reference is then released on the
next iteration or mem_cgroup_iter_break. mem_cgroup_iter currently
releases the reference right after it gets the last css_id.
This is correct because neither prev's memcg nor cgroup are accessed after
then. This will change in the next patch so we need to hold the group
alive a bit longer so let's move the css_put at the end of the function.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn on use_hierarchy by default if sane_behavior is specified and
don't create .use_hierarchy file.
It is debatable whether to remove .use_hierarchy file or make it ro as
the former could make transition easier in certain cases; however, the
behavior changes which will be gated by sane_behavior are intensive
including changing basic meaning of certain control knobs in a few
controllers and I don't really think keeping this piece would make
things easier in any noticeable way, so let's remove it.
v2: Explain that mem_cgroup_bind() doesn't have to worry about
children as suggested by Michal Hocko.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
As cgroup supports rename, it's unsafe to dereference dentry->d_name
without proper vfs locks. Fix this by using cgroup_name() rather than
dentry directly.
Also open code memcg_cache_name because it is called only from
kmem_cache_dup which frees the returned name right after
kmem_cache_create_memcg makes a copy of it. Such a short-lived
allocation doesn't make too much sense. So replace it by a static
buffer as kmem_cache_dup is called with memcg_cache_mutex.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Whilst I run the risk of a flogging for disloyalty to the Lord of Sealand,
I do have CONFIG_MEMCG=y CONFIG_MEMCG_KMEM not set, and grow tired of the
"mm/memcontrol.c:4972:12: warning: `memcg_propagate_kmem' defined but not
used [-Wunused-function]" seen in 3.8-rc: move the #ifdef outwards.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should encourage all memcg controller initialization independent on a
specific mem_cgroup to be done here rather than exploit css_alloc
callback and assume that nothing happens before root cgroup is created.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg_stock are currently initialized during the root cgroup allocation
which is OK but it pointlessly pollutes memcg allocation code with
something that can be called when the memcg subsystem is initialized by
mem_cgroup_init along with other controller specific parts.
This patch wraps the current memcg_stock initialization code into a
helper calls it from the controller subsystem initialization code.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per-node-zone soft limit tree is currently initialized when the root
cgroup is created which is OK but it pointlessly pollutes memcg
allocation code with something that can be called when the memcg
subsystem is initialized by mem_cgroup_init along with other controller
specific parts.
While we are at it let's make mem_cgroup_soft_limit_tree_init void
because it doesn't make much sense to report memory failure because if
we fail to allocate memory that early during the boot then we are
screwed anyway (this saves some code).
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An inactive file list is considered low when its active counterpart is
bigger, regardless of whether it is a global zone LRU list or a memcg
zone LRU list. The only difference is in how the LRU size is assessed.
get_lru_size() does the right thing for both global and memcg reclaim
situations.
Get rid of inactive_file_is_low_global() and
mem_cgroup_inactive_file_is_low() by using get_lru_size() and compare
the numbers in common code.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When use_hierarchy is enabled, we acquire an extra reference count in
our parent during cgroup creation. We don't release it, though, if any
failure exist in the creation process.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Reported-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We were deferring the kmemcg static branch increment to a later time,
due to a nasty dependency between the cpu_hotplug lock, taken by the
jump label update, and the cgroup_lock.
Now we no longer take the cgroup lock, and we can save ourselves the
trouble.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the preparation work done in earlier patches, the cgroup_lock can
be trivially replaced with a memcg-specific lock. This is an automatic
translation at every site where the values involved were queried.
The sites where values are written, however, used to be naturally called
under cgroup_lock. This is the case for instance in the css_online
callback. For those, we now need to explicitly add the memcg lock.
With this, all the calls to cgroup_lock outside cgroup core are gone.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, we use cgroups' provided list of children to verify if it is
safe to proceed with any value change that is dependent on the cgroup
being empty.
This is less than ideal, because it enforces a dependency over cgroup
core that we would be better off without. The solution proposed here is
to iterate over the child cgroups and if any is found that is already
online, we bounce and return: we don't really care how many children we
have, only if we have any.
This is also made to be hierarchy aware. IOW, cgroups with hierarchy
disabled, while they still exist, will be considered for the purpose of
this interface as having no children.
[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is a preparatory work for later locking rework to get rid of
big cgroup lock from memory controller code.
The memory controller uses some tunables to adjust its operation. Those
tunables are inherited from parent to children upon children
intialization. For most of them, the value cannot be changed after the
parent has a new children.
cgroup core splits initialization in two phases: css_alloc and css_online.
After css_alloc, the memory allocation and basic initialization are done.
But the new group is not yet visible anywhere, not even for cgroup core
code. It is only somewhere between css_alloc and css_online that it is
inserted into the internal children lists. Copying tunable values in
css_alloc will lead to inconsistent values: the children will copy the old
parent values, that can change between the copy and the moment in which
the groups is linked to any data structure that can indicate the presence
of children.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In memcg, we use the cgroup_lock basically to synchronize against
attaching new children to a cgroup. We do this because we rely on
cgroup core to provide us with this information.
We need to guarantee that upon child creation, our tunables are
consistent. For those, the calls to cgroup_lock() all live in handlers
like mem_cgroup_hierarchy_write(), where we change a tunable in the
group that is hierarchy-related. For instance, the use_hierarchy flag
cannot be changed if the cgroup already have children.
Furthermore, those values are propagated from the parent to the child
when a new child is created. So if we don't lock like this, we can end
up with the following situation:
A B
memcg_css_alloc() mem_cgroup_hierarchy_write()
copy use hierarchy from parent change use hierarchy in parent
finish creation.
This is mainly because during create, we are still not fully connected
to the css tree. So all iterators and the such that we could use, will
fail to show that the group has children.
My observation is that all of creation can proceed in parallel with
those tasks, except value assignment. So what this patch series does is
to first move all value assignment that is dependent on parent values
from css_alloc to css_online, where the iterators all work, and then we
lock only the value assignment. This will guarantee that parent and
children always have consistent values. Together with an online test,
that can be derived from the observation that the refcount of an online
memcg can be made to be always positive, we should be able to
synchronize our side without the cgroup lock.
This patch:
Currently, we rely on the cgroup_lock() to prevent changes to
move_charge_at_immigrate during task migration. However, this is only
needed because the current strategy keeps checking this value throughout
the whole process. Since all we need is serialization, one needs only
to guarantee that whatever decision we made in the beginning of a
specific migration is respected throughout the process.
We can achieve this by just saving it in mc. By doing this, no kind of
locking is needed.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to maintain all the memcg bookkeeping, we need per-node
descriptors, which will in turn contain a per-zone descriptor.
Because we want to statically allocate those, this array ends up being
very big. Part of the reason is that we allocate something large enough
to hold MAX_NUMNODES, the compile time constant that holds the maximum
number of nodes we would ever consider.
However, we can do better in some cases if the firmware help us. This
is true for modern x86 machines; coincidentally one of the architectures
in which MAX_NUMNODES tends to be very big.
By using the firmware-provided maximum number of nodes instead of
MAX_NUMNODES, we can reduce the memory footprint of struct memcg
considerably. In the extreme case in which we have only one node, this
reduces the size of the structure from ~ 64k to ~2k. This is
particularly important because it means that we will no longer resort to
the vmalloc area for the struct memcg on defconfigs. We also have
enough room for an extra node and still be outside vmalloc.
One also has to keep in mind that with the industry's ability to fit
more processors in a die as fast as the FED prints money, a nodes = 2
configuration is already respectably big.
[akpm@linux-foundation.org: add check for invalid nid, remove inline]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memcg swap accounting is currently enabled by enable_swap_cgroup when
the root cgroup is created. mem_cgroup_init acts as a memcg subsystem
initializer which sounds like a much better place for enable_swap_cgroup
as well. We already register memsw files from there so it makes a lot
of sense to merge those two into a single enable_swap_cgroup function.
This patch doesn't introduce any semantic changes.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: CAI Qian <caiqian@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhouping Liu has reported that memsw files are exported even though swap
accounting is runtime disabled if MEMCG_SWAP is enabled. This behavior
has been introduced by commit af36f906c0 ("memcg: always create memsw
files if CGROUP_MEM_RES_CTLR_SWAP") and it causes any attempt to open
the file to return EOPNOTSUPP. Although EOPNOTSUPP should say be clear
that memsw operations are not supported in the given configuration it is
fair to say that this behavior could be quite confusing.
Let's tear memsw files out of default cgroup files and add them only if
the swap accounting is really enabled (either by MEMCG_SWAP_ENABLED or
swapaccount=1 boot parameter). We can hook into mem_cgroup_init which
is called when the memcg subsystem is initialized and which happens
after boot command line is processed.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Zhouping Liu <zliu@redhat.com>
Tested-by: Zhouping Liu <zliu@redhat.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: CAI Qian <caiqian@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I use several fast SSD to do swap, swapper_space.tree_lock is
heavily contended. This makes each swap partition have one
address_space to reduce the lock contention. There is an array of
address_space for swap. The swap entry type is the index to the array.
In my test with 3 SSD, this increases the swapout throughput 20%.
[akpm@linux-foundation.org: revert unneeded change to __add_to_swap_cache]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The designed workflow for the caches in kmemcg is: register it with
memcg_register_cache() if kmemcg is already available or later on when a
new kmemcg appears at memcg_update_cache_sizes() which will handle all
caches in the system. The caches created at boot time will be handled
by the later, and the memcg-caches as well as any system caches that are
registered later on by the former.
There is a bug, however, in memcg_register_cache: we correctly set up
the array size, but do not mark the cache as a root cache.
This means that allocations for any cache appearing late in the game
will see memcg->memcg_params->is_root_cache == false, and in particular,
trigger VM_BUG_ON(!cachep->memcg_params->is_root_cache) in
__memcg_kmem_cache_get.
The obvious fix is to include the missing assignment.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLAB allows us to tune a particular cache behavior with tunables. When
creating a new memcg cache copy, we'd like to preserve any tunables the
parent cache already had.
This could be done by an explicit call to do_tune_cpucache() after the
cache is created. But this is not very convenient now that the caches are
created from common code, since this function is SLAB-specific.
Another method of doing that is taking advantage of the fact that
do_tune_cpucache() is always called from enable_cpucache(), which is
called at cache initialization. We can just preset the values, and then
things work as expected.
It can also happen that a root cache has its tunables updated during
normal system operation. In this case, we will propagate the change to
all caches that are already active.
This change will require us to move the assignment of root_cache in
memcg_params a bit earlier. We need this to be already set - which
memcg_kmem_register_cache will do - when we reach __kmem_cache_create()
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we create caches in memcgs, we need to display their usage
information somewhere. We'll adopt a scheme similar to /proc/meminfo,
with aggregate totals shown in the global file, and per-group information
stored in the group itself.
For the time being, only reads are allowed in the per-group cache.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This means that when we destroy a memcg cache that happened to be empty,
those caches may take a lot of time to go away: removing the memcg
reference won't destroy them - because there are pending references, and
the empty pages will stay there, until a shrinker is called upon for any
reason.
In this patch, we will call kmem_cache_shrink() for all dead caches that
cannot be destroyed because of remaining pages. After shrinking, it is
possible that it could be freed. If this is not the case, we'll schedule
a lazy worker to keep trying.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This enables us to remove all the children of a kmem_cache being
destroyed, if for example the kernel module it's being used in gets
unloaded. Otherwise, the children will still point to the destroyed
parent.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement destruction of memcg caches. Right now, only caches where our
reference counter is the last remaining are deleted. If there are any
other reference counters around, we just leave the caches lying around
until they go away.
When that happens, a destruction function is called from the cache code.
Caches are only destroyed in process context, so we queue them up for
later processing in the general case.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are able to match a cache allocation to a particular memcg. If the
task doesn't change groups during the allocation itself - a rare event,
this will give us a good picture about who is the first group to touch a
cache page.
This patch uses the now available infrastructure by calling
memcg_kmem_get_cache() before all the cache allocations.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create a mechanism that skip memcg allocations during certain pieces of
our core code. It basically works in the same way as
preempt_disable()/preempt_enable(): By marking a region under which all
allocations will be accounted to the root memcg.
We need this to prevent races in early cache creation, when we
allocate data using caches that are not necessarily created already.
Signed-off-by: Glauber Costa <glommer@parallels.com>
yCc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator is able to bind a page to a memcg when it is
allocated. But for the caches, we'd like to have as many objects as
possible in a page belonging to the same cache.
This is done in this patch by calling memcg_kmem_get_cache in the
beginning of every allocation function. This function is patched out by
static branches when kernel memory controller is not being used.
It assumes that the task allocating, which determines the memcg in the
page allocator, belongs to the same cgroup throughout the whole process.
Misaccounting can happen if the task calls memcg_kmem_get_cache() while
belonging to a cgroup, and later on changes. This is considered
acceptable, and should only happen upon task migration.
Before the cache is created by the memcg core, there is also a possible
imbalance: the task belongs to a memcg, but the cache being allocated from
is the global cache, since the child cache is not yet guaranteed to be
ready. This case is also fine, since in this case the GFP_KMEMCG will not
be passed and the page allocator will not attempt any cgroup accounting.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every cache that is considered a root cache (basically the "original"
caches, tied to the root memcg/no-memcg) will have an array that should be
large enough to store a cache pointer per each memcg in the system.
Theoreticaly, this is as high as 1 << sizeof(css_id), which is currently
in the 64k pointers range. Most of the time, we won't be using that much.
What goes in this patch, is a simple scheme to dynamically allocate such
an array, in order to minimize memory usage for memcg caches. Because we
would also like to avoid allocations all the time, at least for now, the
array will only grow. It will tend to be big enough to hold the maximum
number of kmem-limited memcgs ever achieved.
We'll allocate it to be a minimum of 64 kmem-limited memcgs. When we have
more than that, we'll start doubling the size of this array every time the
limit is reached.
Because we are only considering kmem limited memcgs, a natural point for
this to happen is when we write to the limit. At that point, we already
have set_limit_mutex held, so that will become our natural synchronization
mechanism.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow a memcg parameter to be passed during cache creation. When the slub
allocator is being used, it will only merge caches that belong to the same
memcg. We'll do this by scanning the global list, and then translating
the cache to a memcg-specific cache
Default function is created as a wrapper, passing NULL to the memcg
version. We only merge caches that belong to the same memcg.
A helper is provided, memcg_css_id: because slub needs a unique cache name
for sysfs. Since this is visible, but not the canonical location for slab
data, the cache name is not used, the css_id should suffice.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A lot of the initialization we do in mem_cgroup_create() is done with
softirqs enabled. This include grabbing a css id, which holds
&ss->id_lock->rlock, and the per-zone trees, which holds
rtpz->lock->rlock. All of those signal to the lockdep mechanism that
those locks can be used in SOFTIRQ-ON-W context.
This means that the freeing of memcg structure must happen in a
compatible context, otherwise we'll get a deadlock, like the one below,
caught by lockdep:
free_accounted_pages+0x47/0x4c
free_task+0x31/0x5c
__put_task_struct+0xc2/0xdb
put_task_struct+0x1e/0x22
delayed_put_task_struct+0x7a/0x98
__rcu_process_callbacks+0x269/0x3df
rcu_process_callbacks+0x31/0x5b
__do_softirq+0x122/0x277
This usage pattern could not be triggered before kmem came into play.
With the introduction of kmem stack handling, it is possible that we call
the last mem_cgroup_put() from the task destructor, which is run in an rcu
callback. Such callbacks are run with softirqs disabled, leading to the
offensive usage pattern.
In general, we have little, if any, means to guarantee in which context
the last memcg_put will happen. The best we can do is test it and try to
make sure no invalid context releases are happening. But as we add more
code to memcg, the possible interactions grow in number and expose more
ways to get context conflicts. One thing to keep in mind, is that part of
the freeing process is already deferred to a worker, such as vfree(), that
can only be called from process context.
For the moment, the only two functions we really need moved away are:
* free_css_id(), and
* mem_cgroup_remove_from_trees().
But because the later accesses per-zone info,
free_mem_cgroup_per_zone_info() needs to be moved as well. With that, we
are left with the per_cpu stats only. Better move it all.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Tested-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because the ultimate goal of the kmem tracking in memcg is to track slab
pages as well, we can't guarantee that we'll always be able to point a
page to a particular process, and migrate the charges along with it -
since in the common case, a page will contain data belonging to multiple
processes.
Because of that, when we destroy a memcg, we only make sure the
destruction will succeed by discounting the kmem charges from the user
charges when we try to empty the cgroup.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use static branches to patch the code in or out when not used.
Because the _ACTIVE bit on kmem_accounted is only set after the increment
is done, we guarantee that the root memcg will always be selected for kmem
charges until all call sites are patched (see memcg_kmem_enabled). This
guarantees that no mischarges are applied.
Static branch decrement happens when the last reference count from the
kmem accounting in memcg dies. This will only happen when the charges
drop down to 0.
When that happens, we need to disable the static branch only on those
memcgs that enabled it. To achieve this, we would be forced to complicate
the code by keeping track of which memcgs were the ones that actually
enabled limits, and which ones got it from its parents.
It is a lot simpler just to do static_key_slow_inc() on every child
that is accounted.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>