# SPDX-License-Identifier: GPL-2.0 config PARISC def_bool y select ARCH_32BIT_OFF_T if !64BIT select ARCH_MIGHT_HAVE_PC_PARPORT select HAVE_IDE select HAVE_OPROFILE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_SYSCALL_TRACEPOINTS select ARCH_WANT_FRAME_POINTERS select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_STRICT_KERNEL_RWX select ARCH_HAS_STRICT_MODULE_RWX select ARCH_HAS_UBSAN_SANITIZE_ALL select ARCH_NO_SG_CHAIN select ARCH_SUPPORTS_MEMORY_FAILURE select DMA_OPS select RTC_CLASS select RTC_DRV_GENERIC select INIT_ALL_POSSIBLE select BUG select BUILDTIME_TABLE_SORT select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZ4 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ select GENERIC_ATOMIC64 if !64BIT select GENERIC_IRQ_PROBE select GENERIC_PCI_IOMAP select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER select SYSCTL_ARCH_UNALIGN_ALLOW select SYSCTL_EXCEPTION_TRACE select HAVE_MOD_ARCH_SPECIFIC select VIRT_TO_BUS select MODULES_USE_ELF_RELA select CLONE_BACKWARDS select TTY # Needed for pdc_cons.c select HAVE_DEBUG_STACKOVERFLOW select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HASH select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL_RELATIVE select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_REGS_AND_STACK_ACCESS_API select GENERIC_SCHED_CLOCK select HAVE_UNSTABLE_SCHED_CLOCK if SMP select GENERIC_CLOCKEVENTS select CPU_NO_EFFICIENT_FFS select NEED_DMA_MAP_STATE select NEED_SG_DMA_LENGTH select HAVE_ARCH_KGDB select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_DYNAMIC_FTRACE if $(cc-option,-fpatchable-function-entry=1,1) select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE select HAVE_KPROBES_ON_FTRACE select HAVE_DYNAMIC_FTRACE_WITH_REGS select SET_FS help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, and later HP3000 series). The PA-RISC Linux project home page is at . config CPU_BIG_ENDIAN def_bool y config MMU def_bool y config STACK_GROWSUP def_bool y config ARCH_DEFCONFIG string default "arch/parisc/configs/generic-32bit_defconfig" if !64BIT default "arch/parisc/configs/generic-64bit_defconfig" if 64BIT config GENERIC_LOCKBREAK bool default y depends on SMP && PREEMPTION config ARCH_HAS_ILOG2_U32 bool default n config ARCH_HAS_ILOG2_U64 bool default n config GENERIC_BUG bool default y depends on BUG config GENERIC_HWEIGHT bool default y config GENERIC_CALIBRATE_DELAY bool default y config TIME_LOW_RES bool depends on SMP default y # unless you want to implement ACPI on PA-RISC ... ;-) config PM bool config STACKTRACE_SUPPORT def_bool y config ISA_DMA_API bool config ARCH_MAY_HAVE_PC_FDC bool depends on BROKEN default y config PGTABLE_LEVELS int default 3 if 64BIT && PARISC_PAGE_SIZE_4KB default 2 config SYS_SUPPORTS_HUGETLBFS def_bool y if PA20 menu "Processor type and features" choice prompt "Processor type" default PA7000 config PA7000 bool "PA7000/PA7100" help This is the processor type of your CPU. This information is used for optimizing purposes. In order to compile a kernel that can run on all 32-bit PA CPUs (albeit not optimally fast), you can specify "PA7000" here. Specifying "PA8000" here will allow you to select a 64-bit kernel which is required on some machines. config PA7100LC bool "PA7100LC" help Select this option for the PCX-L processor, as used in the 712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748, D200, D210, D300, D310 and E-class config PA7200 bool "PA7200" help Select this option for the PCX-T' processor, as used in the C100, C110, J100, J110, J210XC, D250, D260, D350, D360, K100, K200, K210, K220, K400, K410 and K420 config PA7300LC bool "PA7300LC" help Select this option for the PCX-L2 processor, as used in the 744, A180, B132L, B160L, B180L, C132L, C160L, C180L, D220, D230, D320 and D330. config PA8X00 bool "PA8000 and up" help Select this option for PCX-U to PCX-W2 processors. endchoice # Define implied options from the CPU selection here config PA20 def_bool y depends on PA8X00 config PA11 def_bool y depends on PA7000 || PA7100LC || PA7200 || PA7300LC select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_SYNC_DMA_FOR_DEVICE config PREFETCH def_bool y depends on PA8X00 || PA7200 config PARISC_HUGE_KERNEL def_bool y if !MODULES || UBSAN || FTRACE || COMPILE_TEST config MLONGCALLS def_bool y if PARISC_HUGE_KERNEL bool "Enable the -mlong-calls compiler option for big kernels" if !PARISC_HUGE_KERNEL depends on PA8X00 help If you configure the kernel to include many drivers built-in instead as modules, the kernel executable may become too big, so that the linker will not be able to resolve some long branches and fails to link your vmlinux kernel. In that case enabling this option will help you to overcome this limit by using the -mlong-calls compiler option. Usually you want to say N here, unless you e.g. want to build a kernel which includes all necessary drivers built-in and which can be used for TFTP booting without the need to have an initrd ramdisk. Enabling this option will probably slow down your kernel. config 64BIT bool "64-bit kernel" depends on PA8X00 help Enable this if you want to support 64bit kernel on PA-RISC platform. At the moment, only people willing to use more than 2GB of RAM, or having a 64bit-only capable PA-RISC machine should say Y here. Since there is no 64bit userland on PA-RISC, there is no point to enable this option otherwise. The 64bit kernel is significantly bigger and slower than the 32bit one. choice prompt "Kernel page size" default PARISC_PAGE_SIZE_4KB config PARISC_PAGE_SIZE_4KB bool "4KB" help This lets you select the page size of the kernel. For best performance, a page size of 16KB is recommended. For best compatibility with 32bit applications, a page size of 4KB should be selected (the vast majority of 32bit binaries work perfectly fine with a larger page size). 4KB For best 32bit compatibility 16KB For best performance 64KB For best performance, might give more overhead. If you don't know what to do, choose 4KB. config PARISC_PAGE_SIZE_16KB bool "16KB" depends on PA8X00 && BROKEN config PARISC_PAGE_SIZE_64KB bool "64KB" depends on PA8X00 && BROKEN endchoice config PARISC_SELF_EXTRACT bool "Build kernel as self-extracting executable" default y help Say Y if you want to build the parisc kernel as a kind of self-extracting executable. If you say N here, the kernel will be compressed with gzip which can be loaded by the palo bootloader directly too. If you don't know what to do here, say Y. config SMP bool "Symmetric multi-processing support" help This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more than one CPU, say Y. If you say N here, the kernel will run on uni- and multiprocessor machines, but will use only one CPU of a multiprocessor machine. On a uniprocessor machine, the kernel will run faster if you say N. See also and the SMP-HOWTO available at . If you don't know what to do here, say N. config PARISC_CPU_TOPOLOGY bool "Support cpu topology definition" depends on SMP default y help Support PARISC cpu topology definition. config SCHED_MC bool "Multi-core scheduler support" depends on PARISC_CPU_TOPOLOGY && PA8X00 help Multi-core scheduler support improves the CPU scheduler's decision making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" default y help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid overflowing the process kernel stacks. config HOTPLUG_CPU bool default y if SMP config ARCH_SELECT_MEMORY_MODEL def_bool y depends on 64BIT config ARCH_SPARSEMEM_ENABLE def_bool y depends on 64BIT config ARCH_FLATMEM_ENABLE def_bool y config ARCH_SPARSEMEM_DEFAULT def_bool y depends on ARCH_SPARSEMEM_ENABLE source "kernel/Kconfig.hz" config COMPAT def_bool y depends on 64BIT select COMPAT_BINFMT_ELF if BINFMT_ELF config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC config AUDIT_ARCH def_bool y config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP default "4" config KEXEC bool "Kexec system call" select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. It is an ongoing process to be certain the hardware in a machine shutdown, so do not be surprised if this code does not initially work for you. config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE select KEXEC_ELF help This enables the kexec_file_load() System call. This is file based and takes file descriptors as system call argument for kernel and initramfs as opposed to list of segments as accepted by previous system call. endmenu source "drivers/firmware/Kconfig" source "drivers/parisc/Kconfig"