/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2008 Maxime Bizon */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include void bcm63xx_machine_halt(void) { printk(KERN_INFO "System halted\n"); while (1) ; } static void bcm6348_a1_reboot(void) { u32 reg; /* soft reset all blocks */ printk(KERN_INFO "soft-reseting all blocks ...\n"); reg = bcm_perf_readl(PERF_SOFTRESET_REG); reg &= ~SOFTRESET_6348_ALL; bcm_perf_writel(reg, PERF_SOFTRESET_REG); mdelay(10); reg = bcm_perf_readl(PERF_SOFTRESET_REG); reg |= SOFTRESET_6348_ALL; bcm_perf_writel(reg, PERF_SOFTRESET_REG); mdelay(10); /* Jump to the power on address. */ printk(KERN_INFO "jumping to reset vector.\n"); /* set high vectors (base at 0xbfc00000 */ set_c0_status(ST0_BEV | ST0_ERL); /* run uncached in kseg0 */ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); __flush_cache_all(); /* remove all wired TLB entries */ write_c0_wired(0); __asm__ __volatile__( "jr\t%0" : : "r" (0xbfc00000)); while (1) ; } void bcm63xx_machine_reboot(void) { u32 reg; /* mask and clear all external irq */ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); reg &= ~EXTIRQ_CFG_MASK_ALL; reg |= EXTIRQ_CFG_CLEAR_ALL; bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) bcm6348_a1_reboot(); printk(KERN_INFO "triggering watchdog soft-reset...\n"); reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); reg |= SYS_PLL_SOFT_RESET; bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); while (1) ; } static void __bcm63xx_machine_reboot(char *p) { bcm63xx_machine_reboot(); } /* * return system type in /proc/cpuinfo */ const char *get_system_type(void) { static char buf[128]; snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", board_get_name(), bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); return buf; } void __init plat_time_init(void) { mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; } void __init plat_mem_setup(void) { add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); _machine_halt = bcm63xx_machine_halt; _machine_restart = __bcm63xx_machine_reboot; pm_power_off = bcm63xx_machine_halt; set_io_port_base(0); ioport_resource.start = 0; ioport_resource.end = ~0; board_setup(); } int __init bcm63xx_register_devices(void) { return board_register_devices(); } device_initcall(bcm63xx_register_devices);