forked from luck/tmp_suning_uos_patched
4d2e26a38f
Convert docs to ReST and add them to the arch-specific book. The conversion here was trivial, as almost every file there was already using an elegant format close to ReST standard. The changes were mostly to mark literal blocks and add a few missing section title identifiers. One note with regards to "--": on Sphinx, this can't be used to identify a list, as it will format it badly. This can be used, however, to identify a long hyphen - and "---" is an even longer one. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
88 lines
3.4 KiB
ReStructuredText
88 lines
3.4 KiB
ReStructuredText
===================================
|
|
DSCR (Data Stream Control Register)
|
|
===================================
|
|
|
|
DSCR register in powerpc allows user to have some control of prefetch of data
|
|
stream in the processor. Please refer to the ISA documents or related manual
|
|
for more detailed information regarding how to use this DSCR to attain this
|
|
control of the prefetches . This document here provides an overview of kernel
|
|
support for DSCR, related kernel objects, it's functionalities and exported
|
|
user interface.
|
|
|
|
(A) Data Structures:
|
|
|
|
(1) thread_struct::
|
|
|
|
dscr /* Thread DSCR value */
|
|
dscr_inherit /* Thread has changed default DSCR */
|
|
|
|
(2) PACA::
|
|
|
|
dscr_default /* per-CPU DSCR default value */
|
|
|
|
(3) sysfs.c::
|
|
|
|
dscr_default /* System DSCR default value */
|
|
|
|
(B) Scheduler Changes:
|
|
|
|
Scheduler will write the per-CPU DSCR default which is stored in the
|
|
CPU's PACA value into the register if the thread has dscr_inherit value
|
|
cleared which means that it has not changed the default DSCR till now.
|
|
If the dscr_inherit value is set which means that it has changed the
|
|
default DSCR value, scheduler will write the changed value which will
|
|
now be contained in thread struct's dscr into the register instead of
|
|
the per-CPU default PACA based DSCR value.
|
|
|
|
NOTE: Please note here that the system wide global DSCR value never
|
|
gets used directly in the scheduler process context switch at all.
|
|
|
|
(C) SYSFS Interface:
|
|
|
|
- Global DSCR default: /sys/devices/system/cpu/dscr_default
|
|
- CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
|
|
|
|
Changing the global DSCR default in the sysfs will change all the CPU
|
|
specific DSCR defaults immediately in their PACA structures. Again if
|
|
the current process has the dscr_inherit clear, it also writes the new
|
|
value into every CPU's DSCR register right away and updates the current
|
|
thread's DSCR value as well.
|
|
|
|
Changing the CPU specific DSCR default value in the sysfs does exactly
|
|
the same thing as above but unlike the global one above, it just changes
|
|
stuff for that particular CPU instead for all the CPUs on the system.
|
|
|
|
(D) User Space Instructions:
|
|
|
|
The DSCR register can be accessed in the user space using any of these
|
|
two SPR numbers available for that purpose.
|
|
|
|
(1) Problem state SPR: 0x03 (Un-privileged, POWER8 only)
|
|
(2) Privileged state SPR: 0x11 (Privileged)
|
|
|
|
Accessing DSCR through privileged SPR number (0x11) from user space
|
|
works, as it is emulated following an illegal instruction exception
|
|
inside the kernel. Both mfspr and mtspr instructions are emulated.
|
|
|
|
Accessing DSCR through user level SPR (0x03) from user space will first
|
|
create a facility unavailable exception. Inside this exception handler
|
|
all mfspr instruction based read attempts will get emulated and returned
|
|
where as the first mtspr instruction based write attempts will enable
|
|
the DSCR facility for the next time around (both for read and write) by
|
|
setting DSCR facility in the FSCR register.
|
|
|
|
(E) Specifics about 'dscr_inherit':
|
|
|
|
The thread struct element 'dscr_inherit' represents whether the thread
|
|
in question has attempted and changed the DSCR itself using any of the
|
|
following methods. This element signifies whether the thread wants to
|
|
use the CPU default DSCR value or its own changed DSCR value in the
|
|
kernel.
|
|
|
|
(1) mtspr instruction (SPR number 0x03)
|
|
(2) mtspr instruction (SPR number 0x11)
|
|
(3) ptrace interface (Explicitly set user DSCR value)
|
|
|
|
Any child of the process created after this event in the process inherits
|
|
this same behaviour as well.
|