forked from luck/tmp_suning_uos_patched
3ade81db49
[ Upstream commit b64acb28da8394485f0762e657470c9fc33aca4d ]
When CONFIG_ATH9K is built-in but LED support is in a loadable
module, both ath9k drivers fails to link:
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds':
gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister'
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds':
gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext'
The problem is that the 'imply' keyword does not enforce any dependency
but is only a weak hint to Kconfig to enable another symbol from a
defconfig file.
Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect
configuration but still allows building the driver without LED support.
The 'select MAC80211_LEDS' is now ensures that the LED support is
actually used if it is present, and the added Kconfig dependency
on MAC80211_LEDS ensures that it cannot be enabled manually when it
has no effect.
Fixes: 197f466e93 ("ath9k_htc: Do not select MAC80211_LEDS by default")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
307 lines
8.7 KiB
Plaintext
307 lines
8.7 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
config MAC80211
|
|
tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
|
|
depends on CFG80211
|
|
select CRYPTO
|
|
select CRYPTO_LIB_ARC4
|
|
select CRYPTO_AES
|
|
select CRYPTO_CCM
|
|
select CRYPTO_GCM
|
|
select CRYPTO_CMAC
|
|
select CRC32
|
|
help
|
|
This option enables the hardware independent IEEE 802.11
|
|
networking stack.
|
|
|
|
comment "CFG80211 needs to be enabled for MAC80211"
|
|
depends on CFG80211=n
|
|
|
|
if MAC80211 != n
|
|
|
|
config MAC80211_HAS_RC
|
|
bool
|
|
|
|
config MAC80211_RC_MINSTREL
|
|
bool "Minstrel" if EXPERT
|
|
select MAC80211_HAS_RC
|
|
default y
|
|
help
|
|
This option enables the 'minstrel' TX rate control algorithm
|
|
|
|
choice
|
|
prompt "Default rate control algorithm"
|
|
depends on MAC80211_HAS_RC
|
|
default MAC80211_RC_DEFAULT_MINSTREL
|
|
help
|
|
This option selects the default rate control algorithm
|
|
mac80211 will use. Note that this default can still be
|
|
overridden through the ieee80211_default_rc_algo module
|
|
parameter if different algorithms are available.
|
|
|
|
config MAC80211_RC_DEFAULT_MINSTREL
|
|
bool "Minstrel"
|
|
depends on MAC80211_RC_MINSTREL
|
|
help
|
|
Select Minstrel as the default rate control algorithm.
|
|
|
|
|
|
endchoice
|
|
|
|
config MAC80211_RC_DEFAULT
|
|
string
|
|
default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL
|
|
default ""
|
|
|
|
endif
|
|
|
|
comment "Some wireless drivers require a rate control algorithm"
|
|
depends on MAC80211 && MAC80211_HAS_RC=n
|
|
|
|
config MAC80211_MESH
|
|
bool "Enable mac80211 mesh networking support"
|
|
depends on MAC80211
|
|
help
|
|
Select this option to enable 802.11 mesh operation in mac80211
|
|
drivers that support it. 802.11 mesh connects multiple stations
|
|
over (possibly multi-hop) wireless links to form a single logical
|
|
LAN.
|
|
|
|
config MAC80211_LEDS
|
|
bool "Enable LED triggers"
|
|
depends on MAC80211
|
|
depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211
|
|
select LEDS_TRIGGERS
|
|
help
|
|
This option enables a few LED triggers for different
|
|
packet receive/transmit events.
|
|
|
|
config MAC80211_DEBUGFS
|
|
bool "Export mac80211 internals in DebugFS"
|
|
depends on MAC80211 && DEBUG_FS
|
|
help
|
|
Select this to see extensive information about
|
|
the internal state of mac80211 in debugfs.
|
|
|
|
Say N unless you know you need this.
|
|
|
|
config MAC80211_MESSAGE_TRACING
|
|
bool "Trace all mac80211 debug messages"
|
|
depends on MAC80211
|
|
help
|
|
Select this option to have mac80211 register the
|
|
mac80211_msg trace subsystem with tracepoints to
|
|
collect all debugging messages, independent of
|
|
printing them into the kernel log.
|
|
|
|
The overhead in this option is that all the messages
|
|
need to be present in the binary and formatted at
|
|
runtime for tracing.
|
|
|
|
menuconfig MAC80211_DEBUG_MENU
|
|
bool "Select mac80211 debugging features"
|
|
depends on MAC80211
|
|
help
|
|
This option collects various mac80211 debug settings.
|
|
|
|
config MAC80211_NOINLINE
|
|
bool "Do not inline TX/RX handlers"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
This option affects code generation in mac80211, when
|
|
selected some functions are marked "noinline" to allow
|
|
easier debugging of problems in the transmit and receive
|
|
paths.
|
|
|
|
This option increases code size a bit and inserts a lot
|
|
of function calls in the code, but is otherwise safe to
|
|
enable.
|
|
|
|
If unsure, say N unless you expect to be finding problems
|
|
in mac80211.
|
|
|
|
config MAC80211_VERBOSE_DEBUG
|
|
bool "Verbose debugging output"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out
|
|
many debugging messages. It should not be selected
|
|
on production systems as some of the messages are
|
|
remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MLME_DEBUG
|
|
bool "Verbose managed MLME output"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out
|
|
debugging messages for the managed-mode MLME. It
|
|
should not be selected on production systems as some
|
|
of the messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_STA_DEBUG
|
|
bool "Verbose station debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out
|
|
debugging messages for station addition/removal.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_HT_DEBUG
|
|
bool "Verbose HT debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
This option enables 802.11n High Throughput features
|
|
debug tracing output.
|
|
|
|
It should not be selected on production systems as some
|
|
of the messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_OCB_DEBUG
|
|
bool "Verbose OCB debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out
|
|
very verbose OCB debugging messages. It should not
|
|
be selected on production systems as those messages
|
|
are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_IBSS_DEBUG
|
|
bool "Verbose IBSS debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out
|
|
very verbose IBSS debugging messages. It should not
|
|
be selected on production systems as those messages
|
|
are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_PS_DEBUG
|
|
bool "Verbose powersave mode debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out very
|
|
verbose power save mode debugging messages (when mac80211
|
|
is an AP and has power saving stations.)
|
|
It should not be selected on production systems as those
|
|
messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MPL_DEBUG
|
|
bool "Verbose mesh peer link debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very
|
|
verbose mesh peer link debugging messages (when mac80211
|
|
is taking part in a mesh network).
|
|
It should not be selected on production systems as those
|
|
messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MPATH_DEBUG
|
|
bool "Verbose mesh path debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very
|
|
verbose mesh path selection debugging messages (when mac80211
|
|
is taking part in a mesh network).
|
|
It should not be selected on production systems as those
|
|
messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MHWMP_DEBUG
|
|
bool "Verbose mesh HWMP routing debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very
|
|
verbose mesh routing (HWMP) debugging messages (when mac80211
|
|
is taking part in a mesh network).
|
|
It should not be selected on production systems as those
|
|
messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MESH_SYNC_DEBUG
|
|
bool "Verbose mesh synchronization debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very verbose mesh
|
|
synchronization debugging messages (when mac80211 is taking part in a
|
|
mesh network).
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MESH_CSA_DEBUG
|
|
bool "Verbose mesh channel switch debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very verbose mesh
|
|
channel switch debugging messages (when mac80211 is taking part in a
|
|
mesh network).
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_MESH_PS_DEBUG
|
|
bool "Verbose mesh powersave debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_MESH
|
|
help
|
|
Selecting this option causes mac80211 to print out very verbose mesh
|
|
powersave debugging messages (when mac80211 is taking part in a
|
|
mesh network).
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_TDLS_DEBUG
|
|
bool "Verbose TDLS debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
help
|
|
Selecting this option causes mac80211 to print out very
|
|
verbose TDLS selection debugging messages (when mac80211
|
|
is a TDLS STA).
|
|
It should not be selected on production systems as those
|
|
messages are remotely triggerable.
|
|
|
|
Do not select this option.
|
|
|
|
config MAC80211_DEBUG_COUNTERS
|
|
bool "Extra statistics for TX/RX debugging"
|
|
depends on MAC80211_DEBUG_MENU
|
|
depends on MAC80211_DEBUGFS
|
|
help
|
|
Selecting this option causes mac80211 to keep additional
|
|
and very verbose statistics about TX and RX handler use
|
|
as well as a few selected dot11 counters. These will be
|
|
exposed in debugfs.
|
|
|
|
Note that some of the counters are not concurrency safe
|
|
and may thus not always be accurate.
|
|
|
|
If unsure, say N.
|
|
|
|
config MAC80211_STA_HASH_MAX_SIZE
|
|
int "Station hash table maximum size" if MAC80211_DEBUG_MENU
|
|
default 0
|
|
help
|
|
Setting this option to a low value (e.g. 4) allows testing the
|
|
hash table with collisions relatively deterministically (just
|
|
connect more stations than the number selected here.)
|
|
|
|
If unsure, leave the default of 0.
|