forked from luck/tmp_suning_uos_patched
46654728b5
Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
4488 lines
127 KiB
C
4488 lines
127 KiB
C
/*******************************************************************************
|
|
*
|
|
* "cs4281.c" -- Cirrus Logic-Crystal CS4281 linux audio driver.
|
|
*
|
|
* Copyright (C) 2000,2001 Cirrus Logic Corp.
|
|
* -- adapted from drivers by Thomas Sailer,
|
|
* -- but don't bug him; Problems should go to:
|
|
* -- tom woller (twoller@crystal.cirrus.com) or
|
|
* (audio@crystal.cirrus.com).
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Module command line parameters:
|
|
* none
|
|
*
|
|
* Supported devices:
|
|
* /dev/dsp standard /dev/dsp device, (mostly) OSS compatible
|
|
* /dev/mixer standard /dev/mixer device, (mostly) OSS compatible
|
|
* /dev/midi simple MIDI UART interface, no ioctl
|
|
*
|
|
* Modification History
|
|
* 08/20/00 trw - silence and no stopping DAC until release
|
|
* 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop.
|
|
* 09/18/00 trw - added 16bit only record with conversion
|
|
* 09/24/00 trw - added Enhanced Full duplex (separate simultaneous
|
|
* capture/playback rates)
|
|
* 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin
|
|
* libOSSm.so)
|
|
* 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal)
|
|
* 11/03/00 trw - fixed interrupt loss/stutter, added debug.
|
|
* 11/10/00 bkz - added __devinit to cs4281_hw_init()
|
|
* 11/10/00 trw - fixed SMP and capture spinlock hang.
|
|
* 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm.
|
|
* 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix.
|
|
* 12/08/00 trw - added PM support.
|
|
* 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8
|
|
* (RH/Dell base), 2.2.18, 2.2.12. cleaned up code mods by ident.
|
|
* 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup.
|
|
* 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use
|
|
* defaultorder-100 as power of 2 for the buffer size. example:
|
|
* 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size.
|
|
*
|
|
*******************************************************************************/
|
|
|
|
/* uncomment the following line to disable building PM support into the driver */
|
|
//#define NOT_CS4281_PM 1
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sound.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/soundcard.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include <asm/current.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/page.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
//#include "cs_dm.h"
|
|
#include "cs4281_hwdefs.h"
|
|
#include "cs4281pm.h"
|
|
|
|
struct cs4281_state;
|
|
|
|
static void stop_dac(struct cs4281_state *s);
|
|
static void stop_adc(struct cs4281_state *s);
|
|
static void start_dac(struct cs4281_state *s);
|
|
static void start_adc(struct cs4281_state *s);
|
|
#undef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
#ifndef PCI_VENDOR_ID_CIRRUS
|
|
#define PCI_VENDOR_ID_CIRRUS 0x1013
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_CRYSTAL_CS4281
|
|
#define PCI_DEVICE_ID_CRYSTAL_CS4281 0x6005
|
|
#endif
|
|
|
|
#define CS4281_MAGIC ((PCI_DEVICE_ID_CRYSTAL_CS4281<<16) | PCI_VENDOR_ID_CIRRUS)
|
|
#define CS4281_CFLR_DEFAULT 0x00000001 /* CFLR must be in AC97 link mode */
|
|
|
|
// buffer order determines the size of the dma buffer for the driver.
|
|
// under Linux, a smaller buffer allows more responsiveness from many of the
|
|
// applications (e.g. games). A larger buffer allows some of the apps (esound)
|
|
// to not underrun the dma buffer as easily. As default, use 32k (order=3)
|
|
// rather than 64k as some of the games work more responsively.
|
|
// log base 2( buff sz = 32k).
|
|
static unsigned long defaultorder = 3;
|
|
module_param(defaultorder, ulong, 0);
|
|
|
|
//
|
|
// Turn on/off debugging compilation by commenting out "#define CSDEBUG"
|
|
//
|
|
#define CSDEBUG 1
|
|
#if CSDEBUG
|
|
#define CSDEBUG_INTERFACE 1
|
|
#else
|
|
#undef CSDEBUG_INTERFACE
|
|
#endif
|
|
//
|
|
// cs_debugmask areas
|
|
//
|
|
#define CS_INIT 0x00000001 // initialization and probe functions
|
|
#define CS_ERROR 0x00000002 // tmp debugging bit placeholder
|
|
#define CS_INTERRUPT 0x00000004 // interrupt handler (separate from all other)
|
|
#define CS_FUNCTION 0x00000008 // enter/leave functions
|
|
#define CS_WAVE_WRITE 0x00000010 // write information for wave
|
|
#define CS_WAVE_READ 0x00000020 // read information for wave
|
|
#define CS_MIDI_WRITE 0x00000040 // write information for midi
|
|
#define CS_MIDI_READ 0x00000080 // read information for midi
|
|
#define CS_MPU401_WRITE 0x00000100 // write information for mpu401
|
|
#define CS_MPU401_READ 0x00000200 // read information for mpu401
|
|
#define CS_OPEN 0x00000400 // all open functions in the driver
|
|
#define CS_RELEASE 0x00000800 // all release functions in the driver
|
|
#define CS_PARMS 0x00001000 // functional and operational parameters
|
|
#define CS_IOCTL 0x00002000 // ioctl (non-mixer)
|
|
#define CS_PM 0x00004000 // power management
|
|
#define CS_TMP 0x10000000 // tmp debug mask bit
|
|
|
|
#define CS_IOCTL_CMD_SUSPEND 0x1 // suspend
|
|
#define CS_IOCTL_CMD_RESUME 0x2 // resume
|
|
//
|
|
// CSDEBUG is usual mode is set to 1, then use the
|
|
// cs_debuglevel and cs_debugmask to turn on or off debugging.
|
|
// Debug level of 1 has been defined to be kernel errors and info
|
|
// that should be printed on any released driver.
|
|
//
|
|
#if CSDEBUG
|
|
#define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;}
|
|
#else
|
|
#define CS_DBGOUT(mask,level,x)
|
|
#endif
|
|
|
|
#if CSDEBUG
|
|
static unsigned long cs_debuglevel = 1; // levels range from 1-9
|
|
static unsigned long cs_debugmask = CS_INIT | CS_ERROR; // use CS_DBGOUT with various mask values
|
|
module_param(cs_debuglevel, ulong, 0);
|
|
module_param(cs_debugmask, ulong, 0);
|
|
#endif
|
|
#define CS_TRUE 1
|
|
#define CS_FALSE 0
|
|
|
|
// MIDI buffer sizes
|
|
#define MIDIINBUF 500
|
|
#define MIDIOUTBUF 500
|
|
|
|
#define FMODE_MIDI_SHIFT 3
|
|
#define FMODE_MIDI_READ (FMODE_READ << FMODE_MIDI_SHIFT)
|
|
#define FMODE_MIDI_WRITE (FMODE_WRITE << FMODE_MIDI_SHIFT)
|
|
|
|
#define CS4281_MAJOR_VERSION 1
|
|
#define CS4281_MINOR_VERSION 13
|
|
#ifdef __ia64__
|
|
#define CS4281_ARCH 64 //architecture key
|
|
#else
|
|
#define CS4281_ARCH 32 //architecture key
|
|
#endif
|
|
|
|
#define CS_TYPE_ADC 0
|
|
#define CS_TYPE_DAC 1
|
|
|
|
|
|
static const char invalid_magic[] =
|
|
KERN_CRIT "cs4281: invalid magic value\n";
|
|
|
|
#define VALIDATE_STATE(s) \
|
|
({ \
|
|
if (!(s) || (s)->magic != CS4281_MAGIC) { \
|
|
printk(invalid_magic); \
|
|
return -ENXIO; \
|
|
} \
|
|
})
|
|
|
|
//LIST_HEAD(cs4281_devs);
|
|
static struct list_head cs4281_devs = { &cs4281_devs, &cs4281_devs };
|
|
|
|
struct cs4281_state;
|
|
|
|
#include "cs4281_wrapper-24.c"
|
|
|
|
struct cs4281_state {
|
|
// magic
|
|
unsigned int magic;
|
|
|
|
// we keep the cards in a linked list
|
|
struct cs4281_state *next;
|
|
|
|
// pcidev is needed to turn off the DDMA controller at driver shutdown
|
|
struct pci_dev *pcidev;
|
|
struct list_head list;
|
|
|
|
// soundcore stuff
|
|
int dev_audio;
|
|
int dev_mixer;
|
|
int dev_midi;
|
|
|
|
// hardware resources
|
|
unsigned int pBA0phys, pBA1phys;
|
|
char __iomem *pBA0;
|
|
char __iomem *pBA1;
|
|
unsigned int irq;
|
|
|
|
// mixer registers
|
|
struct {
|
|
unsigned short vol[10];
|
|
unsigned int recsrc;
|
|
unsigned int modcnt;
|
|
unsigned short micpreamp;
|
|
} mix;
|
|
|
|
// wave stuff
|
|
struct properties {
|
|
unsigned fmt;
|
|
unsigned fmt_original; // original requested format
|
|
unsigned channels;
|
|
unsigned rate;
|
|
unsigned char clkdiv;
|
|
} prop_dac, prop_adc;
|
|
unsigned conversion:1; // conversion from 16 to 8 bit in progress
|
|
void *tmpbuff; // tmp buffer for sample conversions
|
|
unsigned ena;
|
|
spinlock_t lock;
|
|
struct semaphore open_sem;
|
|
struct semaphore open_sem_adc;
|
|
struct semaphore open_sem_dac;
|
|
mode_t open_mode;
|
|
wait_queue_head_t open_wait;
|
|
wait_queue_head_t open_wait_adc;
|
|
wait_queue_head_t open_wait_dac;
|
|
|
|
dma_addr_t dmaaddr_tmpbuff;
|
|
unsigned buforder_tmpbuff; // Log base 2 of 'rawbuf' size in bytes..
|
|
struct dmabuf {
|
|
void *rawbuf; // Physical address of
|
|
dma_addr_t dmaaddr;
|
|
unsigned buforder; // Log base 2 of 'rawbuf' size in bytes..
|
|
unsigned numfrag; // # of 'fragments' in the buffer.
|
|
unsigned fragshift; // Log base 2 of fragment size.
|
|
unsigned hwptr, swptr;
|
|
unsigned total_bytes; // # bytes process since open.
|
|
unsigned blocks; // last returned blocks value GETOPTR
|
|
unsigned wakeup; // interrupt occurred on block
|
|
int count;
|
|
unsigned underrun; // underrun flag
|
|
unsigned error; // over/underrun
|
|
wait_queue_head_t wait;
|
|
// redundant, but makes calculations easier
|
|
unsigned fragsize; // 2**fragshift..
|
|
unsigned dmasize; // 2**buforder.
|
|
unsigned fragsamples;
|
|
// OSS stuff
|
|
unsigned mapped:1; // Buffer mapped in cs4281_mmap()?
|
|
unsigned ready:1; // prog_dmabuf_dac()/adc() successful?
|
|
unsigned endcleared:1;
|
|
unsigned type:1; // adc or dac buffer (CS_TYPE_XXX)
|
|
unsigned ossfragshift;
|
|
int ossmaxfrags;
|
|
unsigned subdivision;
|
|
} dma_dac, dma_adc;
|
|
|
|
// midi stuff
|
|
struct {
|
|
unsigned ird, iwr, icnt;
|
|
unsigned ord, owr, ocnt;
|
|
wait_queue_head_t iwait;
|
|
wait_queue_head_t owait;
|
|
struct timer_list timer;
|
|
unsigned char ibuf[MIDIINBUF];
|
|
unsigned char obuf[MIDIOUTBUF];
|
|
} midi;
|
|
|
|
struct cs4281_pm pm;
|
|
struct cs4281_pipeline pl[CS4281_NUMBER_OF_PIPELINES];
|
|
};
|
|
|
|
#include "cs4281pm-24.c"
|
|
|
|
#if CSDEBUG
|
|
|
|
// DEBUG ROUTINES
|
|
|
|
#define SOUND_MIXER_CS_GETDBGLEVEL _SIOWR('M',120, int)
|
|
#define SOUND_MIXER_CS_SETDBGLEVEL _SIOWR('M',121, int)
|
|
#define SOUND_MIXER_CS_GETDBGMASK _SIOWR('M',122, int)
|
|
#define SOUND_MIXER_CS_SETDBGMASK _SIOWR('M',123, int)
|
|
|
|
#define SOUND_MIXER_CS_APM _SIOWR('M',124, int)
|
|
|
|
|
|
static void cs_printioctl(unsigned int x)
|
|
{
|
|
unsigned int i;
|
|
unsigned char vidx;
|
|
// Index of mixtable1[] member is Device ID
|
|
// and must be <= SOUND_MIXER_NRDEVICES.
|
|
// Value of array member is index into s->mix.vol[]
|
|
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
|
|
[SOUND_MIXER_PCM] = 1, // voice
|
|
[SOUND_MIXER_LINE1] = 2, // AUX
|
|
[SOUND_MIXER_CD] = 3, // CD
|
|
[SOUND_MIXER_LINE] = 4, // Line
|
|
[SOUND_MIXER_SYNTH] = 5, // FM
|
|
[SOUND_MIXER_MIC] = 6, // Mic
|
|
[SOUND_MIXER_SPEAKER] = 7, // Speaker
|
|
[SOUND_MIXER_RECLEV] = 8, // Recording level
|
|
[SOUND_MIXER_VOLUME] = 9 // Master Volume
|
|
};
|
|
|
|
switch (x) {
|
|
case SOUND_MIXER_CS_GETDBGMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_GETDBGMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_GETDBGLEVEL:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_GETDBGLEVEL:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_SETDBGMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_SETDBGMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_SETDBGLEVEL:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_SETDBGLEVEL:\n"));
|
|
break;
|
|
case OSS_GETVERSION:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SYNC:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETCAPS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_RESET:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SPEED:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n"));
|
|
break;
|
|
case SNDCTL_DSP_STEREO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n"));
|
|
break;
|
|
case SNDCTL_DSP_CHANNELS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETFMTS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETFMT:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n"));
|
|
break;
|
|
case SNDCTL_DSP_POST:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETTRIGGER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETTRIGGER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETOSPACE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETISPACE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETODELAY:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETIPTR:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETOPTR:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SNDCTL_DSP_SETFRAGMENT:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SUBDIVIDE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_RATE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_PCM_READ_CHANNELS:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_BITS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n"));
|
|
break;
|
|
case SOUND_PCM_WRITE_FILTER:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_PCM_WRITE_FILTER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETSYNCRO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_FILTER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE1:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE2:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE3:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE4:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE5:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n"));
|
|
break;
|
|
case SOUND_MIXER_INFO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n"));
|
|
break;
|
|
case SOUND_OLD_MIXER_INFO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n"));
|
|
break;
|
|
|
|
default:
|
|
switch (_IOC_NR(x)) {
|
|
case SOUND_MIXER_VOLUME:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_VOLUME:\n"));
|
|
break;
|
|
case SOUND_MIXER_SPEAKER:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_SPEAKER:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECLEV:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECLEV:\n"));
|
|
break;
|
|
case SOUND_MIXER_MIC:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_MIC:\n"));
|
|
break;
|
|
case SOUND_MIXER_SYNTH:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_SYNTH:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECSRC:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECSRC:\n"));
|
|
break;
|
|
case SOUND_MIXER_DEVMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_DEVMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_STEREODEVS:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_STEREODEVS:\n"));
|
|
break;
|
|
case SOUND_MIXER_CAPS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n"));
|
|
break;
|
|
default:
|
|
i = _IOC_NR(x);
|
|
if (i >= SOUND_MIXER_NRDEVICES
|
|
|| !(vidx = mixtable1[i])) {
|
|
CS_DBGOUT(CS_IOCTL, 4, printk
|
|
("UNKNOWN IOCTL: 0x%.8x NR=%d\n",
|
|
x, i));
|
|
} else {
|
|
CS_DBGOUT(CS_IOCTL, 4, printk
|
|
("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n",
|
|
x, i));
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
static int prog_dmabuf_adc(struct cs4281_state *s);
|
|
static void prog_codec(struct cs4281_state *s, unsigned type);
|
|
|
|
// ---------------------------------------------------------------------
|
|
//
|
|
// Hardware Interfaces For the CS4281
|
|
//
|
|
|
|
|
|
//******************************************************************************
|
|
// "delayus()-- Delay for the specified # of microseconds.
|
|
//******************************************************************************
|
|
static void delayus(struct cs4281_state *s, u32 delay)
|
|
{
|
|
u32 j;
|
|
if ((delay > 9999) && (s->pm.flags & CS4281_PM_IDLE)) {
|
|
j = (delay * HZ) / 1000000; /* calculate delay in jiffies */
|
|
if (j < 1)
|
|
j = 1; /* minimum one jiffy. */
|
|
current->state = TASK_UNINTERRUPTIBLE;
|
|
schedule_timeout(j);
|
|
} else
|
|
udelay(delay);
|
|
return;
|
|
}
|
|
|
|
|
|
//******************************************************************************
|
|
// "cs4281_read_ac97" -- Reads a word from the specified location in the
|
|
// CS4281's address space(based on the BA0 register).
|
|
//
|
|
// 1. Write ACCAD = Command Address Register = 46Ch for AC97 register address
|
|
// 2. Write ACCDA = Command Data Register = 470h for data to write to AC97 register,
|
|
// 0h for reads.
|
|
// 3. Write ACCTL = Control Register = 460h for initiating the write
|
|
// 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 17h
|
|
// 5. if DCV not cleared, break and return error
|
|
// 6. Read ACSTS = Status Register = 464h, check VSTS bit
|
|
//****************************************************************************
|
|
static int cs4281_read_ac97(struct cs4281_state *card, u32 offset,
|
|
u32 * value)
|
|
{
|
|
u32 count, status;
|
|
|
|
// Make sure that there is not data sitting
|
|
// around from a previous uncompleted access.
|
|
// ACSDA = Status Data Register = 47Ch
|
|
status = readl(card->pBA0 + BA0_ACSDA);
|
|
|
|
// Setup the AC97 control registers on the CS4281 to send the
|
|
// appropriate command to the AC97 to perform the read.
|
|
// ACCAD = Command Address Register = 46Ch
|
|
// ACCDA = Command Data Register = 470h
|
|
// ACCTL = Control Register = 460h
|
|
// bit DCV - will clear when process completed
|
|
// bit CRW - Read command
|
|
// bit VFRM - valid frame enabled
|
|
// bit ESYN - ASYNC generation enabled
|
|
|
|
// Get the actual AC97 register from the offset
|
|
writel(offset - BA0_AC97_RESET, card->pBA0 + BA0_ACCAD);
|
|
writel(0, card->pBA0 + BA0_ACCDA);
|
|
writel(ACCTL_DCV | ACCTL_CRW | ACCTL_VFRM | ACCTL_ESYN,
|
|
card->pBA0 + BA0_ACCTL);
|
|
|
|
// Wait for the read to occur.
|
|
for (count = 0; count < 10; count++) {
|
|
// First, we want to wait for a short time.
|
|
udelay(25);
|
|
|
|
// Now, check to see if the read has completed.
|
|
// ACCTL = 460h, DCV should be reset by now and 460h = 17h
|
|
if (!(readl(card->pBA0 + BA0_ACCTL) & ACCTL_DCV))
|
|
break;
|
|
}
|
|
|
|
// Make sure the read completed.
|
|
if (readl(card->pBA0 + BA0_ACCTL) & ACCTL_DCV)
|
|
return 1;
|
|
|
|
// Wait for the valid status bit to go active.
|
|
for (count = 0; count < 10; count++) {
|
|
// Read the AC97 status register.
|
|
// ACSTS = Status Register = 464h
|
|
status = readl(card->pBA0 + BA0_ACSTS);
|
|
|
|
// See if we have valid status.
|
|
// VSTS - Valid Status
|
|
if (status & ACSTS_VSTS)
|
|
break;
|
|
// Wait for a short while.
|
|
udelay(25);
|
|
}
|
|
|
|
// Make sure we got valid status.
|
|
if (!(status & ACSTS_VSTS))
|
|
return 1;
|
|
|
|
// Read the data returned from the AC97 register.
|
|
// ACSDA = Status Data Register = 474h
|
|
*value = readl(card->pBA0 + BA0_ACSDA);
|
|
|
|
// Success.
|
|
return (0);
|
|
}
|
|
|
|
|
|
//****************************************************************************
|
|
//
|
|
// "cs4281_write_ac97()"-- writes a word to the specified location in the
|
|
// CS461x's address space (based on the part's base address zero register).
|
|
//
|
|
// 1. Write ACCAD = Command Address Register = 46Ch for AC97 register address
|
|
// 2. Write ACCDA = Command Data Register = 470h for data to write to AC97 reg.
|
|
// 3. Write ACCTL = Control Register = 460h for initiating the write
|
|
// 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 07h
|
|
// 5. if DCV not cleared, break and return error
|
|
//
|
|
//****************************************************************************
|
|
static int cs4281_write_ac97(struct cs4281_state *card, u32 offset,
|
|
u32 value)
|
|
{
|
|
u32 count, status=0;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cs_4281_write_ac97()+ \n"));
|
|
|
|
// Setup the AC97 control registers on the CS4281 to send the
|
|
// appropriate command to the AC97 to perform the read.
|
|
// ACCAD = Command Address Register = 46Ch
|
|
// ACCDA = Command Data Register = 470h
|
|
// ACCTL = Control Register = 460h
|
|
// set DCV - will clear when process completed
|
|
// reset CRW - Write command
|
|
// set VFRM - valid frame enabled
|
|
// set ESYN - ASYNC generation enabled
|
|
// set RSTN - ARST# inactive, AC97 codec not reset
|
|
|
|
// Get the actual AC97 register from the offset
|
|
|
|
writel(offset - BA0_AC97_RESET, card->pBA0 + BA0_ACCAD);
|
|
writel(value, card->pBA0 + BA0_ACCDA);
|
|
writel(ACCTL_DCV | ACCTL_VFRM | ACCTL_ESYN,
|
|
card->pBA0 + BA0_ACCTL);
|
|
|
|
// Wait for the write to occur.
|
|
for (count = 0; count < 100; count++) {
|
|
// First, we want to wait for a short time.
|
|
udelay(25);
|
|
// Now, check to see if the write has completed.
|
|
// ACCTL = 460h, DCV should be reset by now and 460h = 07h
|
|
status = readl(card->pBA0 + BA0_ACCTL);
|
|
if (!(status & ACCTL_DCV))
|
|
break;
|
|
}
|
|
|
|
// Make sure the write completed.
|
|
if (status & ACCTL_DCV) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: cs_4281_write_ac97()- unable to write. ACCTL_DCV active\n"));
|
|
return 1;
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cs_4281_write_ac97()- 0\n"));
|
|
// Success.
|
|
return 0;
|
|
}
|
|
|
|
|
|
//******************************************************************************
|
|
// "Init4281()" -- Bring up the part.
|
|
//******************************************************************************
|
|
static __devinit int cs4281_hw_init(struct cs4281_state *card)
|
|
{
|
|
u32 ac97_slotid;
|
|
u32 temp1, temp2;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_hw_init()+ \n"));
|
|
#ifndef NOT_CS4281_PM
|
|
if(!card)
|
|
return 1;
|
|
#endif
|
|
temp2 = readl(card->pBA0 + BA0_CFLR);
|
|
CS_DBGOUT(CS_INIT | CS_ERROR | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_hw_init() CFLR 0x%x\n", temp2));
|
|
if(temp2 != CS4281_CFLR_DEFAULT)
|
|
{
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: cs4281_hw_init() CFLR invalid - resetting from 0x%x to 0x%x\n",
|
|
temp2,CS4281_CFLR_DEFAULT));
|
|
writel(CS4281_CFLR_DEFAULT, card->pBA0 + BA0_CFLR);
|
|
temp2 = readl(card->pBA0 + BA0_CFLR);
|
|
if(temp2 != CS4281_CFLR_DEFAULT)
|
|
{
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: cs4281_hw_init() Invalid hardware - unable to configure CFLR\n"));
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
//***************************************7
|
|
// Set up the Sound System Configuration
|
|
//***************************************
|
|
|
|
// Set the 'Configuration Write Protect' register
|
|
// to 4281h. Allows vendor-defined configuration
|
|
// space between 0e4h and 0ffh to be written.
|
|
|
|
writel(0x4281, card->pBA0 + BA0_CWPR); // (3e0h)
|
|
|
|
// (0), Blast the clock control register to zero so that the
|
|
// PLL starts out in a known state, and blast the master serial
|
|
// port control register to zero so that the serial ports also
|
|
// start out in a known state.
|
|
|
|
writel(0, card->pBA0 + BA0_CLKCR1); // (400h)
|
|
writel(0, card->pBA0 + BA0_SERMC); // (420h)
|
|
|
|
|
|
// (1), Make ESYN go to zero to turn off
|
|
// the Sync pulse on the AC97 link.
|
|
|
|
writel(0, card->pBA0 + BA0_ACCTL);
|
|
udelay(50);
|
|
|
|
|
|
// (2) Drive the ARST# pin low for a minimum of 1uS (as defined in
|
|
// the AC97 spec) and then drive it high. This is done for non
|
|
// AC97 modes since there might be logic external to the CS461x
|
|
// that uses the ARST# line for a reset.
|
|
|
|
writel(0, card->pBA0 + BA0_SPMC); // (3ech)
|
|
udelay(100);
|
|
writel(SPMC_RSTN, card->pBA0 + BA0_SPMC);
|
|
delayus(card,50000); // Wait 50 ms for ABITCLK to become stable.
|
|
|
|
// (3) Turn on the Sound System Clocks.
|
|
writel(CLKCR1_PLLP, card->pBA0 + BA0_CLKCR1); // (400h)
|
|
delayus(card,50000); // Wait for the PLL to stabilize.
|
|
// Turn on clocking of the core (CLKCR1(400h) = 0x00000030)
|
|
writel(CLKCR1_PLLP | CLKCR1_SWCE, card->pBA0 + BA0_CLKCR1);
|
|
|
|
// (4) Power on everything for now..
|
|
writel(0x7E, card->pBA0 + BA0_SSPM); // (740h)
|
|
|
|
// (5) Wait for clock stabilization.
|
|
for (temp1 = 0; temp1 < 1000; temp1++) {
|
|
udelay(1000);
|
|
if (readl(card->pBA0 + BA0_CLKCR1) & CLKCR1_DLLRDY)
|
|
break;
|
|
}
|
|
if (!(readl(card->pBA0 + BA0_CLKCR1) & CLKCR1_DLLRDY)) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: DLLRDY failed!\n"));
|
|
return -EIO;
|
|
}
|
|
// (6) Enable ASYNC generation.
|
|
writel(ACCTL_ESYN, card->pBA0 + BA0_ACCTL); // (460h)
|
|
|
|
// Now wait 'for a short while' to allow the AC97
|
|
// part to start generating bit clock. (so we don't
|
|
// Try to start the PLL without an input clock.)
|
|
delayus(card,50000);
|
|
|
|
// Set the serial port timing configuration, so that the
|
|
// clock control circuit gets its clock from the right place.
|
|
writel(SERMC_PTC_AC97, card->pBA0 + BA0_SERMC); // (420h)=2.
|
|
|
|
// (7) Wait for the codec ready signal from the AC97 codec.
|
|
|
|
for (temp1 = 0; temp1 < 1000; temp1++) {
|
|
// Delay a mil to let things settle out and
|
|
// to prevent retrying the read too quickly.
|
|
udelay(1000);
|
|
if (readl(card->pBA0 + BA0_ACSTS) & ACSTS_CRDY) // If ready, (464h)
|
|
break; // exit the 'for' loop.
|
|
}
|
|
if (!(readl(card->pBA0 + BA0_ACSTS) & ACSTS_CRDY)) // If never came ready,
|
|
{
|
|
CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_ERR
|
|
"cs4281: ACSTS never came ready!\n"));
|
|
return -EIO; // exit initialization.
|
|
}
|
|
// (8) Assert the 'valid frame' signal so we can
|
|
// begin sending commands to the AC97 codec.
|
|
writel(ACCTL_VFRM | ACCTL_ESYN, card->pBA0 + BA0_ACCTL); // (460h)
|
|
|
|
// (9), Wait until CODEC calibration is finished.
|
|
// Print an error message if it doesn't.
|
|
for (temp1 = 0; temp1 < 1000; temp1++) {
|
|
delayus(card,10000);
|
|
// Read the AC97 Powerdown Control/Status Register.
|
|
cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp2);
|
|
if ((temp2 & 0x0000000F) == 0x0000000F)
|
|
break;
|
|
}
|
|
if ((temp2 & 0x0000000F) != 0x0000000F) {
|
|
CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_ERR
|
|
"cs4281: Codec failed to calibrate. Status = %.8x.\n",
|
|
temp2));
|
|
return -EIO;
|
|
}
|
|
// (10), Set the serial port timing configuration, so that the
|
|
// clock control circuit gets its clock from the right place.
|
|
writel(SERMC_PTC_AC97, card->pBA0 + BA0_SERMC); // (420h)=2.
|
|
|
|
|
|
// (11) Wait until we've sampled input slots 3 & 4 as valid, meaning
|
|
// that the codec is pumping ADC data across the AC link.
|
|
for (temp1 = 0; temp1 < 1000; temp1++) {
|
|
// Delay a mil to let things settle out and
|
|
// to prevent retrying the read too quickly.
|
|
delayus(card,1000); //(test)
|
|
|
|
// Read the input slot valid register; See
|
|
// if input slots 3 and 4 are valid yet.
|
|
if (
|
|
(readl(card->pBA0 + BA0_ACISV) &
|
|
(ACISV_ISV3 | ACISV_ISV4)) ==
|
|
(ACISV_ISV3 | ACISV_ISV4)) break; // Exit the 'for' if slots are valid.
|
|
}
|
|
// If we never got valid data, exit initialization.
|
|
if ((readl(card->pBA0 + BA0_ACISV) & (ACISV_ISV3 | ACISV_ISV4))
|
|
!= (ACISV_ISV3 | ACISV_ISV4)) {
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_ERR
|
|
"cs4281: Never got valid data!\n"));
|
|
return -EIO; // If no valid data, exit initialization.
|
|
}
|
|
// (12), Start digital data transfer of audio data to the codec.
|
|
writel(ACOSV_SLV3 | ACOSV_SLV4, card->pBA0 + BA0_ACOSV); // (468h)
|
|
|
|
|
|
//**************************************
|
|
// Unmute the Master and Alternate
|
|
// (headphone) volumes. Set to max.
|
|
//**************************************
|
|
cs4281_write_ac97(card, BA0_AC97_HEADPHONE_VOLUME, 0);
|
|
cs4281_write_ac97(card, BA0_AC97_MASTER_VOLUME, 0);
|
|
|
|
//******************************************
|
|
// Power on the DAC(AddDACUser()from main())
|
|
//******************************************
|
|
cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1);
|
|
cs4281_write_ac97(card, BA0_AC97_POWERDOWN, temp1 &= 0xfdff);
|
|
|
|
// Wait until we sample a DAC ready state.
|
|
for (temp2 = 0; temp2 < 32; temp2++) {
|
|
// Let's wait a mil to let things settle.
|
|
delayus(card,1000);
|
|
// Read the current state of the power control reg.
|
|
cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1);
|
|
// If the DAC ready state bit is set, stop waiting.
|
|
if (temp1 & 0x2)
|
|
break;
|
|
}
|
|
|
|
//******************************************
|
|
// Power on the ADC(AddADCUser()from main())
|
|
//******************************************
|
|
cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1);
|
|
cs4281_write_ac97(card, BA0_AC97_POWERDOWN, temp1 &= 0xfeff);
|
|
|
|
// Wait until we sample ADC ready state.
|
|
for (temp2 = 0; temp2 < 32; temp2++) {
|
|
// Let's wait a mil to let things settle.
|
|
delayus(card,1000);
|
|
// Read the current state of the power control reg.
|
|
cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1);
|
|
// If the ADC ready state bit is set, stop waiting.
|
|
if (temp1 & 0x1)
|
|
break;
|
|
}
|
|
// Set up 4281 Register contents that
|
|
// don't change for boot duration.
|
|
|
|
// For playback, we map AC97 slot 3 and 4(Left
|
|
// & Right PCM playback) to DMA Channel 0.
|
|
// Set the fifo to be 15 bytes at offset zero.
|
|
|
|
ac97_slotid = 0x01000f00; // FCR0.RS[4:0]=1(=>slot4, right PCM playback).
|
|
// FCR0.LS[4:0]=0(=>slot3, left PCM playback).
|
|
// FCR0.SZ[6-0]=15; FCR0.OF[6-0]=0.
|
|
writel(ac97_slotid, card->pBA0 + BA0_FCR0); // (180h)
|
|
writel(ac97_slotid | FCRn_FEN, card->pBA0 + BA0_FCR0); // Turn on FIFO Enable.
|
|
|
|
// For capture, we map AC97 slot 10 and 11(Left
|
|
// and Right PCM Record) to DMA Channel 1.
|
|
// Set the fifo to be 15 bytes at offset sixteen.
|
|
ac97_slotid = 0x0B0A0f10; // FCR1.RS[4:0]=11(=>slot11, right PCM record).
|
|
// FCR1.LS[4:0]=10(=>slot10, left PCM record).
|
|
// FCR1.SZ[6-0]=15; FCR1.OF[6-0]=16.
|
|
writel(ac97_slotid | FCRn_PSH, card->pBA0 + BA0_FCR1); // (184h)
|
|
writel(ac97_slotid | FCRn_FEN, card->pBA0 + BA0_FCR1); // Turn on FIFO Enable.
|
|
|
|
// Map the Playback SRC to the same AC97 slots(3 & 4--
|
|
// --Playback left & right)as DMA channel 0.
|
|
// Map the record SRC to the same AC97 slots(10 & 11--
|
|
// -- Record left & right) as DMA channel 1.
|
|
|
|
ac97_slotid = 0x0b0a0100; // SCRSA.PRSS[4:0]=1(=>slot4, right PCM playback).
|
|
// SCRSA.PLSS[4:0]=0(=>slot3, left PCM playback).
|
|
// SCRSA.CRSS[4:0]=11(=>slot11, right PCM record)
|
|
// SCRSA.CLSS[4:0]=10(=>slot10, left PCM record).
|
|
writel(ac97_slotid, card->pBA0 + BA0_SRCSA); // (75ch)
|
|
|
|
// Set 'Half Terminal Count Interrupt Enable' and 'Terminal
|
|
// Count Interrupt Enable' in DMA Control Registers 0 & 1.
|
|
// Set 'MSK' flag to 1 to keep the DMA engines paused.
|
|
temp1 = (DCRn_HTCIE | DCRn_TCIE | DCRn_MSK); // (00030001h)
|
|
writel(temp1, card->pBA0 + BA0_DCR0); // (154h
|
|
writel(temp1, card->pBA0 + BA0_DCR1); // (15ch)
|
|
|
|
// Set 'Auto-Initialize Control' to 'enabled'; For playback,
|
|
// set 'Transfer Type Control'(TR[1:0]) to 'read transfer',
|
|
// for record, set Transfer Type Control to 'write transfer'.
|
|
// All other bits set to zero; Some will be changed @ transfer start.
|
|
temp1 = (DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); // (20000018h)
|
|
writel(temp1, card->pBA0 + BA0_DMR0); // (150h)
|
|
temp1 = (DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); // (20000014h)
|
|
writel(temp1, card->pBA0 + BA0_DMR1); // (158h)
|
|
|
|
// Enable DMA interrupts generally, and
|
|
// DMA0 & DMA1 interrupts specifically.
|
|
temp1 = readl(card->pBA0 + BA0_HIMR) & 0xfffbfcff;
|
|
writel(temp1, card->pBA0 + BA0_HIMR);
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_hw_init()- 0\n"));
|
|
return 0;
|
|
}
|
|
|
|
#ifndef NOT_CS4281_PM
|
|
static void printpm(struct cs4281_state *s)
|
|
{
|
|
CS_DBGOUT(CS_PM, 9, printk("pm struct:\n"));
|
|
CS_DBGOUT(CS_PM, 9, printk("flags:0x%x u32CLKCR1_SAVE: 0%x u32SSPMValue: 0x%x\n",
|
|
(unsigned)s->pm.flags,s->pm.u32CLKCR1_SAVE,s->pm.u32SSPMValue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32PPLVCvalue: 0x%x u32PPRVCvalue: 0x%x\n",
|
|
s->pm.u32PPLVCvalue,s->pm.u32PPRVCvalue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32FMLVCvalue: 0x%x u32FMRVCvalue: 0x%x\n",
|
|
s->pm.u32FMLVCvalue,s->pm.u32FMRVCvalue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32GPIORvalue: 0x%x u32JSCTLvalue: 0x%x\n",
|
|
s->pm.u32GPIORvalue,s->pm.u32JSCTLvalue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32SSCR: 0x%x u32SRCSA: 0x%x\n",
|
|
s->pm.u32SSCR,s->pm.u32SRCSA));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DacASR: 0x%x u32AdcASR: 0x%x\n",
|
|
s->pm.u32DacASR,s->pm.u32AdcASR));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DacSR: 0x%x u32AdcSR: 0x%x\n",
|
|
s->pm.u32DacSR,s->pm.u32AdcSR));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32MIDCR_Save: 0x%x\n",
|
|
s->pm.u32MIDCR_Save));
|
|
|
|
}
|
|
static void printpipe(struct cs4281_pipeline *pl)
|
|
{
|
|
|
|
CS_DBGOUT(CS_PM, 9, printk("pm struct:\n"));
|
|
CS_DBGOUT(CS_PM, 9, printk("flags:0x%x number: 0%x\n",
|
|
(unsigned)pl->flags,pl->number));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DBAnValue: 0%x u32DBCnValue: 0x%x\n",
|
|
pl->u32DBAnValue,pl->u32DBCnValue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DMRnValue: 0x%x u32DCRnValue: 0x%x\n",
|
|
pl->u32DMRnValue,pl->u32DCRnValue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DBAnAddress: 0x%x u32DBCnAddress: 0x%x\n",
|
|
pl->u32DBAnAddress,pl->u32DBCnAddress));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DCAnAddress: 0x%x u32DCCnAddress: 0x%x\n",
|
|
pl->u32DCCnAddress,pl->u32DCCnAddress));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DMRnAddress: 0x%x u32DCRnAddress: 0x%x\n",
|
|
pl->u32DMRnAddress,pl->u32DCRnAddress));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32HDSRnAddress: 0x%x u32DBAn_Save: 0x%x\n",
|
|
pl->u32HDSRnAddress,pl->u32DBAn_Save));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DBCn_Save: 0x%x u32DMRn_Save: 0x%x\n",
|
|
pl->u32DBCn_Save,pl->u32DMRn_Save));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DCRn_Save: 0x%x u32DCCn_Save: 0x%x\n",
|
|
pl->u32DCRn_Save,pl->u32DCCn_Save));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32DCAn_Save: 0x%x\n",
|
|
pl->u32DCAn_Save));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32FCRn_Save: 0x%x u32FSICn_Save: 0x%x\n",
|
|
pl->u32FCRn_Save,pl->u32FSICn_Save));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32FCRnValue: 0x%x u32FSICnValue: 0x%x\n",
|
|
pl->u32FCRnValue,pl->u32FSICnValue));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32FCRnAddress: 0x%x u32FSICnAddress: 0x%x\n",
|
|
pl->u32FCRnAddress,pl->u32FSICnAddress));
|
|
CS_DBGOUT(CS_PM, 9, printk("u32FPDRnValue: 0x%x u32FPDRnAddress: 0x%x\n",
|
|
pl->u32FPDRnValue,pl->u32FPDRnAddress));
|
|
}
|
|
static void printpipelines(struct cs4281_state *s)
|
|
{
|
|
int i;
|
|
for(i=0;i<CS4281_NUMBER_OF_PIPELINES;i++)
|
|
{
|
|
if(s->pl[i].flags & CS4281_PIPELINE_VALID)
|
|
{
|
|
printpipe(&s->pl[i]);
|
|
}
|
|
}
|
|
}
|
|
/****************************************************************************
|
|
*
|
|
* Suspend - save the ac97 regs, mute the outputs and power down the part.
|
|
*
|
|
****************************************************************************/
|
|
static void cs4281_ac97_suspend(struct cs4281_state *s)
|
|
{
|
|
int Count,i;
|
|
|
|
CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_suspend()+\n"));
|
|
/*
|
|
* change the state, save the current hwptr, then stop the dac/adc
|
|
*/
|
|
s->pm.flags &= ~CS4281_PM_IDLE;
|
|
s->pm.flags |= CS4281_PM_SUSPENDING;
|
|
s->pm.u32hwptr_playback = readl(s->pBA0 + BA0_DCA0);
|
|
s->pm.u32hwptr_capture = readl(s->pBA0 + BA0_DCA1);
|
|
stop_dac(s);
|
|
stop_adc(s);
|
|
|
|
for(Count = 0x2, i=0; (Count <= CS4281_AC97_HIGHESTREGTORESTORE)
|
|
&& (i < CS4281_AC97_NUMBER_RESTORE_REGS);
|
|
Count += 2, i++)
|
|
{
|
|
cs4281_read_ac97(s, BA0_AC97_RESET + Count, &s->pm.ac97[i]);
|
|
}
|
|
/*
|
|
* Save the ac97 volume registers as well as the current powerdown state.
|
|
* Now, mute the all the outputs (master, headphone, and mono), as well
|
|
* as the PCM volume, in preparation for powering down the entire part.
|
|
*/
|
|
cs4281_read_ac97(s, BA0_AC97_MASTER_VOLUME, &s->pm.u32AC97_master_volume);
|
|
cs4281_read_ac97(s, BA0_AC97_HEADPHONE_VOLUME, &s->pm.u32AC97_headphone_volume);
|
|
cs4281_read_ac97(s, BA0_AC97_MASTER_VOLUME_MONO, &s->pm.u32AC97_master_volume_mono);
|
|
cs4281_read_ac97(s, BA0_AC97_PCM_OUT_VOLUME, &s->pm.u32AC97_pcm_out_volume);
|
|
|
|
cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME, 0x8000);
|
|
cs4281_write_ac97(s, BA0_AC97_HEADPHONE_VOLUME, 0x8000);
|
|
cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME_MONO, 0x8000);
|
|
cs4281_write_ac97(s, BA0_AC97_PCM_OUT_VOLUME, 0x8000);
|
|
|
|
cs4281_read_ac97(s, BA0_AC97_POWERDOWN, &s->pm.u32AC97_powerdown);
|
|
cs4281_read_ac97(s, BA0_AC97_GENERAL_PURPOSE, &s->pm.u32AC97_general_purpose);
|
|
|
|
/*
|
|
* And power down everything on the AC97 codec.
|
|
*/
|
|
cs4281_write_ac97(s, BA0_AC97_POWERDOWN, 0xff00);
|
|
CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_suspend()-\n"));
|
|
}
|
|
|
|
/****************************************************************************
|
|
*
|
|
* Resume - power up the part and restore its registers..
|
|
*
|
|
****************************************************************************/
|
|
static void cs4281_ac97_resume(struct cs4281_state *s)
|
|
{
|
|
int Count,i;
|
|
|
|
CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_resume()+\n"));
|
|
|
|
/* do not save the power state registers at this time
|
|
//
|
|
// If we saved away the power control registers, write them into the
|
|
// shadows so those saved values get restored instead of the current
|
|
// shadowed value.
|
|
//
|
|
if( bPowerStateSaved )
|
|
{
|
|
PokeShadow( 0x26, ulSaveReg0x26 );
|
|
bPowerStateSaved = FALSE;
|
|
}
|
|
*/
|
|
|
|
//
|
|
// First, we restore the state of the general purpose register. This
|
|
// contains the mic select (mic1 or mic2) and if we restore this after
|
|
// we restore the mic volume/boost state and mic2 was selected at
|
|
// suspend time, we will end up with a brief period of time where mic1
|
|
// is selected with the volume/boost settings for mic2, causing
|
|
// acoustic feedback. So we restore the general purpose register
|
|
// first, thereby getting the correct mic selected before we restore
|
|
// the mic volume/boost.
|
|
//
|
|
cs4281_write_ac97(s, BA0_AC97_GENERAL_PURPOSE, s->pm.u32AC97_general_purpose);
|
|
|
|
//
|
|
// Now, while the outputs are still muted, restore the state of power
|
|
// on the AC97 part.
|
|
//
|
|
cs4281_write_ac97(s, BA0_AC97_POWERDOWN, s->pm.u32AC97_powerdown);
|
|
|
|
/*
|
|
* Restore just the first set of registers, from register number
|
|
* 0x02 to the register number that ulHighestRegToRestore specifies.
|
|
*/
|
|
for( Count = 0x2, i=0;
|
|
(Count <= CS4281_AC97_HIGHESTREGTORESTORE)
|
|
&& (i < CS4281_AC97_NUMBER_RESTORE_REGS);
|
|
Count += 2, i++)
|
|
{
|
|
cs4281_write_ac97(s, BA0_AC97_RESET + Count, s->pm.ac97[i]);
|
|
}
|
|
CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_resume()-\n"));
|
|
}
|
|
|
|
/* do not save the power state registers at this time
|
|
****************************************************************************
|
|
*
|
|
* SavePowerState - Save the power registers away.
|
|
*
|
|
****************************************************************************
|
|
void
|
|
HWAC97codec::SavePowerState(void)
|
|
{
|
|
ENTRY(TM_OBJECTCALLS, "HWAC97codec::SavePowerState()\r\n");
|
|
|
|
ulSaveReg0x26 = PeekShadow(0x26);
|
|
|
|
//
|
|
// Note that we have saved registers that need to be restored during a
|
|
// resume instead of ulAC97Regs[].
|
|
//
|
|
bPowerStateSaved = TRUE;
|
|
|
|
} // SavePowerState
|
|
*/
|
|
|
|
static void cs4281_SuspendFIFO(struct cs4281_state *s, struct cs4281_pipeline *pl)
|
|
{
|
|
/*
|
|
* We need to save the contents of the BASIC FIFO Registers.
|
|
*/
|
|
pl->u32FCRn_Save = readl(s->pBA0 + pl->u32FCRnAddress);
|
|
pl->u32FSICn_Save = readl(s->pBA0 + pl->u32FSICnAddress);
|
|
}
|
|
static void cs4281_ResumeFIFO(struct cs4281_state *s, struct cs4281_pipeline *pl)
|
|
{
|
|
/*
|
|
* We need to restore the contents of the BASIC FIFO Registers.
|
|
*/
|
|
writel(pl->u32FCRn_Save,s->pBA0 + pl->u32FCRnAddress);
|
|
writel(pl->u32FSICn_Save,s->pBA0 + pl->u32FSICnAddress);
|
|
}
|
|
static void cs4281_SuspendDMAengine(struct cs4281_state *s, struct cs4281_pipeline *pl)
|
|
{
|
|
//
|
|
// We need to save the contents of the BASIC DMA Registers.
|
|
//
|
|
pl->u32DBAn_Save = readl(s->pBA0 + pl->u32DBAnAddress);
|
|
pl->u32DBCn_Save = readl(s->pBA0 + pl->u32DBCnAddress);
|
|
pl->u32DMRn_Save = readl(s->pBA0 + pl->u32DMRnAddress);
|
|
pl->u32DCRn_Save = readl(s->pBA0 + pl->u32DCRnAddress);
|
|
pl->u32DCCn_Save = readl(s->pBA0 + pl->u32DCCnAddress);
|
|
pl->u32DCAn_Save = readl(s->pBA0 + pl->u32DCAnAddress);
|
|
}
|
|
static void cs4281_ResumeDMAengine(struct cs4281_state *s, struct cs4281_pipeline *pl)
|
|
{
|
|
//
|
|
// We need to save the contents of the BASIC DMA Registers.
|
|
//
|
|
writel( pl->u32DBAn_Save, s->pBA0 + pl->u32DBAnAddress);
|
|
writel( pl->u32DBCn_Save, s->pBA0 + pl->u32DBCnAddress);
|
|
writel( pl->u32DMRn_Save, s->pBA0 + pl->u32DMRnAddress);
|
|
writel( pl->u32DCRn_Save, s->pBA0 + pl->u32DCRnAddress);
|
|
writel( pl->u32DCCn_Save, s->pBA0 + pl->u32DCCnAddress);
|
|
writel( pl->u32DCAn_Save, s->pBA0 + pl->u32DCAnAddress);
|
|
}
|
|
|
|
static int cs4281_suspend(struct cs4281_state *s)
|
|
{
|
|
int i;
|
|
u32 u32CLKCR1;
|
|
struct cs4281_pm *pm = &s->pm;
|
|
CS_DBGOUT(CS_PM | CS_FUNCTION, 9,
|
|
printk("cs4281: cs4281_suspend()+ flags=%d\n",
|
|
(unsigned)s->pm.flags));
|
|
/*
|
|
* check the current state, only suspend if IDLE
|
|
*/
|
|
if(!(s->pm.flags & CS4281_PM_IDLE))
|
|
{
|
|
CS_DBGOUT(CS_PM | CS_ERROR, 2,
|
|
printk("cs4281: cs4281_suspend() unable to suspend, not IDLE\n"));
|
|
return 1;
|
|
}
|
|
s->pm.flags &= ~CS4281_PM_IDLE;
|
|
s->pm.flags |= CS4281_PM_SUSPENDING;
|
|
|
|
//
|
|
// Gershwin CLKRUN - Set CKRA
|
|
//
|
|
u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1);
|
|
|
|
pm->u32CLKCR1_SAVE = u32CLKCR1;
|
|
if(!(u32CLKCR1 & 0x00010000 ) )
|
|
writel(u32CLKCR1 | 0x00010000, s->pBA0 + BA0_CLKCR1);
|
|
|
|
//
|
|
// First, turn on the clocks (yikes) to the devices, so that they will
|
|
// respond when we try to save their state.
|
|
//
|
|
if(!(u32CLKCR1 & CLKCR1_SWCE))
|
|
{
|
|
writel(u32CLKCR1 | CLKCR1_SWCE , s->pBA0 + BA0_CLKCR1);
|
|
}
|
|
|
|
//
|
|
// Save the power state
|
|
//
|
|
pm->u32SSPMValue = readl(s->pBA0 + BA0_SSPM);
|
|
|
|
//
|
|
// Disable interrupts.
|
|
//
|
|
writel(HICR_CHGM, s->pBA0 + BA0_HICR);
|
|
|
|
//
|
|
// Save the PCM Playback Left and Right Volume Control.
|
|
//
|
|
pm->u32PPLVCvalue = readl(s->pBA0 + BA0_PPLVC);
|
|
pm->u32PPRVCvalue = readl(s->pBA0 + BA0_PPRVC);
|
|
|
|
//
|
|
// Save the FM Synthesis Left and Right Volume Control.
|
|
//
|
|
pm->u32FMLVCvalue = readl(s->pBA0 + BA0_FMLVC);
|
|
pm->u32FMRVCvalue = readl(s->pBA0 + BA0_FMRVC);
|
|
|
|
//
|
|
// Save the GPIOR value.
|
|
//
|
|
pm->u32GPIORvalue = readl(s->pBA0 + BA0_GPIOR);
|
|
|
|
//
|
|
// Save the JSCTL value.
|
|
//
|
|
pm->u32JSCTLvalue = readl(s->pBA0 + BA0_GPIOR);
|
|
|
|
//
|
|
// Save Sound System Control Register
|
|
//
|
|
pm->u32SSCR = readl(s->pBA0 + BA0_SSCR);
|
|
|
|
//
|
|
// Save SRC Slot Assinment register
|
|
//
|
|
pm->u32SRCSA = readl(s->pBA0 + BA0_SRCSA);
|
|
|
|
//
|
|
// Save sample rate
|
|
//
|
|
pm->u32DacASR = readl(s->pBA0 + BA0_PASR);
|
|
pm->u32AdcASR = readl(s->pBA0 + BA0_CASR);
|
|
pm->u32DacSR = readl(s->pBA0 + BA0_DACSR);
|
|
pm->u32AdcSR = readl(s->pBA0 + BA0_ADCSR);
|
|
|
|
//
|
|
// Loop through all of the PipeLines
|
|
//
|
|
for(i = 0; i < CS4281_NUMBER_OF_PIPELINES; i++)
|
|
{
|
|
if(s->pl[i].flags & CS4281_PIPELINE_VALID)
|
|
{
|
|
//
|
|
// Ask the DMAengines and FIFOs to Suspend.
|
|
//
|
|
cs4281_SuspendDMAengine(s,&s->pl[i]);
|
|
cs4281_SuspendFIFO(s,&s->pl[i]);
|
|
}
|
|
}
|
|
//
|
|
// We need to save the contents of the Midi Control Register.
|
|
//
|
|
pm->u32MIDCR_Save = readl(s->pBA0 + BA0_MIDCR);
|
|
/*
|
|
* save off the AC97 part information
|
|
*/
|
|
cs4281_ac97_suspend(s);
|
|
|
|
//
|
|
// Turn off the serial ports.
|
|
//
|
|
writel(0, s->pBA0 + BA0_SERMC);
|
|
|
|
//
|
|
// Power off FM, Joystick, AC link,
|
|
//
|
|
writel(0, s->pBA0 + BA0_SSPM);
|
|
|
|
//
|
|
// DLL off.
|
|
//
|
|
writel(0, s->pBA0 + BA0_CLKCR1);
|
|
|
|
//
|
|
// AC link off.
|
|
//
|
|
writel(0, s->pBA0 + BA0_SPMC);
|
|
|
|
//
|
|
// Put the chip into D3(hot) state.
|
|
//
|
|
// PokeBA0(BA0_PMCS, 0x00000003);
|
|
|
|
//
|
|
// Gershwin CLKRUN - Clear CKRA
|
|
//
|
|
u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1);
|
|
writel(u32CLKCR1 & 0xFFFEFFFF, s->pBA0 + BA0_CLKCR1);
|
|
|
|
#ifdef CSDEBUG
|
|
printpm(s);
|
|
printpipelines(s);
|
|
#endif
|
|
|
|
s->pm.flags &= ~CS4281_PM_SUSPENDING;
|
|
s->pm.flags |= CS4281_PM_SUSPENDED;
|
|
|
|
CS_DBGOUT(CS_PM | CS_FUNCTION, 9,
|
|
printk("cs4281: cs4281_suspend()- flags=%d\n",
|
|
(unsigned)s->pm.flags));
|
|
return 0;
|
|
}
|
|
|
|
static int cs4281_resume(struct cs4281_state *s)
|
|
{
|
|
int i;
|
|
unsigned temp1;
|
|
u32 u32CLKCR1;
|
|
struct cs4281_pm *pm = &s->pm;
|
|
CS_DBGOUT(CS_PM | CS_FUNCTION, 4,
|
|
printk( "cs4281: cs4281_resume()+ flags=%d\n",
|
|
(unsigned)s->pm.flags));
|
|
if(!(s->pm.flags & CS4281_PM_SUSPENDED))
|
|
{
|
|
CS_DBGOUT(CS_PM | CS_ERROR, 2,
|
|
printk("cs4281: cs4281_resume() unable to resume, not SUSPENDED\n"));
|
|
return 1;
|
|
}
|
|
s->pm.flags &= ~CS4281_PM_SUSPENDED;
|
|
s->pm.flags |= CS4281_PM_RESUMING;
|
|
|
|
//
|
|
// Gershwin CLKRUN - Set CKRA
|
|
//
|
|
u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1);
|
|
writel(u32CLKCR1 | 0x00010000, s->pBA0 + BA0_CLKCR1);
|
|
|
|
//
|
|
// set the power state.
|
|
//
|
|
//old PokeBA0(BA0_PMCS, 0);
|
|
|
|
//
|
|
// Program the clock circuit and serial ports.
|
|
//
|
|
temp1 = cs4281_hw_init(s);
|
|
if (temp1) {
|
|
CS_DBGOUT(CS_ERROR | CS_INIT, 1,
|
|
printk(KERN_ERR
|
|
"cs4281: resume cs4281_hw_init() error.\n"));
|
|
return -1;
|
|
}
|
|
|
|
//
|
|
// restore the Power state
|
|
//
|
|
writel(pm->u32SSPMValue, s->pBA0 + BA0_SSPM);
|
|
|
|
//
|
|
// Set post SRC mix setting (FM or ALT48K)
|
|
//
|
|
writel(pm->u32SSPM_BITS, s->pBA0 + BA0_SSPM);
|
|
|
|
//
|
|
// Loop through all of the PipeLines
|
|
//
|
|
for(i = 0; i < CS4281_NUMBER_OF_PIPELINES; i++)
|
|
{
|
|
if(s->pl[i].flags & CS4281_PIPELINE_VALID)
|
|
{
|
|
//
|
|
// Ask the DMAengines and FIFOs to Resume.
|
|
//
|
|
cs4281_ResumeDMAengine(s,&s->pl[i]);
|
|
cs4281_ResumeFIFO(s,&s->pl[i]);
|
|
}
|
|
}
|
|
//
|
|
// We need to restore the contents of the Midi Control Register.
|
|
//
|
|
writel(pm->u32MIDCR_Save, s->pBA0 + BA0_MIDCR);
|
|
|
|
cs4281_ac97_resume(s);
|
|
//
|
|
// Restore the PCM Playback Left and Right Volume Control.
|
|
//
|
|
writel(pm->u32PPLVCvalue, s->pBA0 + BA0_PPLVC);
|
|
writel(pm->u32PPRVCvalue, s->pBA0 + BA0_PPRVC);
|
|
|
|
//
|
|
// Restore the FM Synthesis Left and Right Volume Control.
|
|
//
|
|
writel(pm->u32FMLVCvalue, s->pBA0 + BA0_FMLVC);
|
|
writel(pm->u32FMRVCvalue, s->pBA0 + BA0_FMRVC);
|
|
|
|
//
|
|
// Restore the JSCTL value.
|
|
//
|
|
writel(pm->u32JSCTLvalue, s->pBA0 + BA0_JSCTL);
|
|
|
|
//
|
|
// Restore the GPIOR register value.
|
|
//
|
|
writel(pm->u32GPIORvalue, s->pBA0 + BA0_GPIOR);
|
|
|
|
//
|
|
// Restore Sound System Control Register
|
|
//
|
|
writel(pm->u32SSCR, s->pBA0 + BA0_SSCR);
|
|
|
|
//
|
|
// Restore SRC Slot Assignment register
|
|
//
|
|
writel(pm->u32SRCSA, s->pBA0 + BA0_SRCSA);
|
|
|
|
//
|
|
// Restore sample rate
|
|
//
|
|
writel(pm->u32DacASR, s->pBA0 + BA0_PASR);
|
|
writel(pm->u32AdcASR, s->pBA0 + BA0_CASR);
|
|
writel(pm->u32DacSR, s->pBA0 + BA0_DACSR);
|
|
writel(pm->u32AdcSR, s->pBA0 + BA0_ADCSR);
|
|
|
|
//
|
|
// Restore CFL1/2 registers we saved to compensate for OEM bugs.
|
|
//
|
|
// PokeBA0(BA0_CFLR, ulConfig);
|
|
|
|
//
|
|
// Gershwin CLKRUN - Clear CKRA
|
|
//
|
|
writel(pm->u32CLKCR1_SAVE, s->pBA0 + BA0_CLKCR1);
|
|
|
|
//
|
|
// Enable interrupts on the part.
|
|
//
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR);
|
|
|
|
#ifdef CSDEBUG
|
|
printpm(s);
|
|
printpipelines(s);
|
|
#endif
|
|
/*
|
|
* change the state, restore the current hwptrs, then stop the dac/adc
|
|
*/
|
|
s->pm.flags |= CS4281_PM_IDLE;
|
|
s->pm.flags &= ~(CS4281_PM_SUSPENDING | CS4281_PM_SUSPENDED
|
|
| CS4281_PM_RESUMING | CS4281_PM_RESUMED);
|
|
|
|
writel(s->pm.u32hwptr_playback, s->pBA0 + BA0_DCA0);
|
|
writel(s->pm.u32hwptr_capture, s->pBA0 + BA0_DCA1);
|
|
start_dac(s);
|
|
start_adc(s);
|
|
|
|
CS_DBGOUT(CS_PM | CS_FUNCTION, 9, printk("cs4281: cs4281_resume()- flags=%d\n",
|
|
(unsigned)s->pm.flags));
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
//******************************************************************************
|
|
// "cs4281_play_rate()" --
|
|
//******************************************************************************
|
|
static void cs4281_play_rate(struct cs4281_state *card, u32 playrate)
|
|
{
|
|
u32 DACSRvalue = 1;
|
|
|
|
// Based on the sample rate, program the DACSR register.
|
|
if (playrate == 8000)
|
|
DACSRvalue = 5;
|
|
if (playrate == 11025)
|
|
DACSRvalue = 4;
|
|
else if (playrate == 22050)
|
|
DACSRvalue = 2;
|
|
else if (playrate == 44100)
|
|
DACSRvalue = 1;
|
|
else if ((playrate <= 48000) && (playrate >= 6023))
|
|
DACSRvalue = 24576000 / (playrate * 16);
|
|
else if (playrate < 6023)
|
|
// Not allowed by open.
|
|
return;
|
|
else if (playrate > 48000)
|
|
// Not allowed by open.
|
|
return;
|
|
CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_play_rate(): DACSRvalue=0x%.8x playrate=%d\n",
|
|
DACSRvalue, playrate));
|
|
// Write the 'sample rate select code'
|
|
// to the 'DAC Sample Rate' register.
|
|
writel(DACSRvalue, card->pBA0 + BA0_DACSR); // (744h)
|
|
}
|
|
|
|
//******************************************************************************
|
|
// "cs4281_record_rate()" -- Initialize the record sample rate converter.
|
|
//******************************************************************************
|
|
static void cs4281_record_rate(struct cs4281_state *card, u32 outrate)
|
|
{
|
|
u32 ADCSRvalue = 1;
|
|
|
|
//
|
|
// Based on the sample rate, program the ADCSR register
|
|
//
|
|
if (outrate == 8000)
|
|
ADCSRvalue = 5;
|
|
if (outrate == 11025)
|
|
ADCSRvalue = 4;
|
|
else if (outrate == 22050)
|
|
ADCSRvalue = 2;
|
|
else if (outrate == 44100)
|
|
ADCSRvalue = 1;
|
|
else if ((outrate <= 48000) && (outrate >= 6023))
|
|
ADCSRvalue = 24576000 / (outrate * 16);
|
|
else if (outrate < 6023) {
|
|
// Not allowed by open.
|
|
return;
|
|
} else if (outrate > 48000) {
|
|
// Not allowed by open.
|
|
return;
|
|
}
|
|
CS_DBGOUT(CS_WAVE_READ | CS_PARMS, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_record_rate(): ADCSRvalue=0x%.8x outrate=%d\n",
|
|
ADCSRvalue, outrate));
|
|
// Write the 'sample rate select code
|
|
// to the 'ADC Sample Rate' register.
|
|
writel(ADCSRvalue, card->pBA0 + BA0_ADCSR); // (748h)
|
|
}
|
|
|
|
|
|
|
|
static void stop_dac(struct cs4281_state *s)
|
|
{
|
|
unsigned long flags;
|
|
unsigned temp1;
|
|
|
|
CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4281: stop_dac():\n"));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena &= ~FMODE_WRITE;
|
|
temp1 = readl(s->pBA0 + BA0_DCR0) | DCRn_MSK;
|
|
writel(temp1, s->pBA0 + BA0_DCR0);
|
|
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
}
|
|
|
|
|
|
static void start_dac(struct cs4281_state *s)
|
|
{
|
|
unsigned long flags;
|
|
unsigned temp1;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4281: start_dac()+\n"));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped ||
|
|
(s->dma_dac.count > 0
|
|
&& s->dma_dac.ready))
|
|
#ifndef NOT_CS4281_PM
|
|
&& (s->pm.flags & CS4281_PM_IDLE))
|
|
#else
|
|
)
|
|
#endif
|
|
{
|
|
s->ena |= FMODE_WRITE;
|
|
temp1 = readl(s->pBA0 + BA0_DCR0) & ~DCRn_MSK; // Clear DMA0 channel mask.
|
|
writel(temp1, s->pBA0 + BA0_DCR0); // Start DMA'ing.
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts.
|
|
|
|
writel(7, s->pBA0 + BA0_PPRVC);
|
|
writel(7, s->pBA0 + BA0_PPLVC);
|
|
CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4281: start_dac(): writel 0x%x start dma\n", temp1));
|
|
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4281: start_dac()-\n"));
|
|
}
|
|
|
|
|
|
static void stop_adc(struct cs4281_state *s)
|
|
{
|
|
unsigned long flags;
|
|
unsigned temp1;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4281: stop_adc()+\n"));
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena &= ~FMODE_READ;
|
|
|
|
if (s->conversion == 1) {
|
|
s->conversion = 0;
|
|
s->prop_adc.fmt = s->prop_adc.fmt_original;
|
|
}
|
|
temp1 = readl(s->pBA0 + BA0_DCR1) | DCRn_MSK;
|
|
writel(temp1, s->pBA0 + BA0_DCR1);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4281: stop_adc()-\n"));
|
|
}
|
|
|
|
|
|
static void start_adc(struct cs4281_state *s)
|
|
{
|
|
unsigned long flags;
|
|
unsigned temp1;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: start_adc()+\n"));
|
|
|
|
if (!(s->ena & FMODE_READ) &&
|
|
(s->dma_adc.mapped || s->dma_adc.count <=
|
|
(signed) (s->dma_adc.dmasize - 2 * s->dma_adc.fragsize))
|
|
&& s->dma_adc.ready
|
|
#ifndef NOT_CS4281_PM
|
|
&& (s->pm.flags & CS4281_PM_IDLE))
|
|
#else
|
|
)
|
|
#endif
|
|
{
|
|
if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
|
|
//
|
|
// now only use 16 bit capture, due to truncation issue
|
|
// in the chip, noticable distortion occurs.
|
|
// allocate buffer and then convert from 16 bit to
|
|
// 8 bit for the user buffer.
|
|
//
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
if (s->prop_adc.fmt & AFMT_S8) {
|
|
s->prop_adc.fmt &= ~AFMT_S8;
|
|
s->prop_adc.fmt |= AFMT_S16_LE;
|
|
}
|
|
if (s->prop_adc.fmt & AFMT_U8) {
|
|
s->prop_adc.fmt &= ~AFMT_U8;
|
|
s->prop_adc.fmt |= AFMT_U16_LE;
|
|
}
|
|
//
|
|
// prog_dmabuf_adc performs a stop_adc() but that is
|
|
// ok since we really haven't started the DMA yet.
|
|
//
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
|
|
if (prog_dmabuf_adc(s) != 0) {
|
|
CS_DBGOUT(CS_ERROR, 2, printk(KERN_INFO
|
|
"cs4281: start_adc(): error in prog_dmabuf_adc\n"));
|
|
}
|
|
s->conversion = 1;
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena |= FMODE_READ;
|
|
temp1 = readl(s->pBA0 + BA0_DCR1) & ~DCRn_MSK; // Clear DMA1 channel mask bit.
|
|
writel(temp1, s->pBA0 + BA0_DCR1); // Start recording
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts.
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
|
|
CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO
|
|
"cs4281: start_adc(): writel 0x%x \n", temp1));
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: start_adc()-\n"));
|
|
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
#define DMABUF_MINORDER 1 // ==> min buffer size = 8K.
|
|
|
|
|
|
static void dealloc_dmabuf(struct cs4281_state *s, struct dmabuf *db)
|
|
{
|
|
struct page *map, *mapend;
|
|
|
|
if (db->rawbuf) {
|
|
// Undo prog_dmabuf()'s marking the pages as reserved
|
|
mapend =
|
|
virt_to_page(db->rawbuf + (PAGE_SIZE << db->buforder) -
|
|
1);
|
|
for (map = virt_to_page(db->rawbuf); map <= mapend; map++)
|
|
ClearPageReserved(map);
|
|
free_dmabuf(s, db);
|
|
}
|
|
if (s->tmpbuff && (db->type == CS_TYPE_ADC)) {
|
|
// Undo prog_dmabuf()'s marking the pages as reserved
|
|
mapend =
|
|
virt_to_page(s->tmpbuff +
|
|
(PAGE_SIZE << s->buforder_tmpbuff) - 1);
|
|
for (map = virt_to_page(s->tmpbuff); map <= mapend; map++)
|
|
ClearPageReserved(map);
|
|
free_dmabuf2(s, db);
|
|
}
|
|
s->tmpbuff = NULL;
|
|
db->rawbuf = NULL;
|
|
db->mapped = db->ready = 0;
|
|
}
|
|
|
|
static int prog_dmabuf(struct cs4281_state *s, struct dmabuf *db)
|
|
{
|
|
int order;
|
|
unsigned bytespersec, temp1;
|
|
unsigned bufs, sample_shift = 0;
|
|
struct page *map, *mapend;
|
|
unsigned long df;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: prog_dmabuf()+\n"));
|
|
db->hwptr = db->swptr = db->total_bytes = db->count = db->error =
|
|
db->endcleared = db->blocks = db->wakeup = db->underrun = 0;
|
|
/*
|
|
* check for order within limits, but do not overwrite value, check
|
|
* later for a fractional defaultorder (i.e. 100+).
|
|
*/
|
|
if((defaultorder > 0) && (defaultorder < 12))
|
|
df = defaultorder;
|
|
else
|
|
df = 1;
|
|
|
|
if (!db->rawbuf) {
|
|
db->ready = db->mapped = 0;
|
|
for (order = df; order >= DMABUF_MINORDER; order--)
|
|
if ( (db->rawbuf = (void *) pci_alloc_consistent(
|
|
s->pcidev, PAGE_SIZE << order, &db-> dmaaddr)))
|
|
break;
|
|
if (!db->rawbuf) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: prog_dmabuf(): unable to allocate rawbuf\n"));
|
|
return -ENOMEM;
|
|
}
|
|
db->buforder = order;
|
|
// Now mark the pages as reserved; otherwise the
|
|
// remap_pfn_range() in cs4281_mmap doesn't work.
|
|
// 1. get index to last page in mem_map array for rawbuf.
|
|
mapend = virt_to_page(db->rawbuf +
|
|
(PAGE_SIZE << db->buforder) - 1);
|
|
|
|
// 2. mark each physical page in range as 'reserved'.
|
|
for (map = virt_to_page(db->rawbuf); map <= mapend; map++)
|
|
SetPageReserved(map);
|
|
}
|
|
if (!s->tmpbuff && (db->type == CS_TYPE_ADC)) {
|
|
for (order = df; order >= DMABUF_MINORDER;
|
|
order--)
|
|
if ( (s->tmpbuff = (void *) pci_alloc_consistent(
|
|
s->pcidev, PAGE_SIZE << order,
|
|
&s->dmaaddr_tmpbuff)))
|
|
break;
|
|
if (!s->tmpbuff) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: prog_dmabuf(): unable to allocate tmpbuff\n"));
|
|
return -ENOMEM;
|
|
}
|
|
s->buforder_tmpbuff = order;
|
|
// Now mark the pages as reserved; otherwise the
|
|
// remap_pfn_range() in cs4281_mmap doesn't work.
|
|
// 1. get index to last page in mem_map array for rawbuf.
|
|
mapend = virt_to_page(s->tmpbuff +
|
|
(PAGE_SIZE << s->buforder_tmpbuff) - 1);
|
|
|
|
// 2. mark each physical page in range as 'reserved'.
|
|
for (map = virt_to_page(s->tmpbuff); map <= mapend; map++)
|
|
SetPageReserved(map);
|
|
}
|
|
if (db->type == CS_TYPE_DAC) {
|
|
if (s->prop_dac.fmt & (AFMT_S16_LE | AFMT_U16_LE))
|
|
sample_shift++;
|
|
if (s->prop_dac.channels > 1)
|
|
sample_shift++;
|
|
bytespersec = s->prop_dac.rate << sample_shift;
|
|
} else // CS_TYPE_ADC
|
|
{
|
|
if (s->prop_adc.fmt & (AFMT_S16_LE | AFMT_U16_LE))
|
|
sample_shift++;
|
|
if (s->prop_adc.channels > 1)
|
|
sample_shift++;
|
|
bytespersec = s->prop_adc.rate << sample_shift;
|
|
}
|
|
bufs = PAGE_SIZE << db->buforder;
|
|
|
|
/*
|
|
* added fractional "defaultorder" inputs. if >100 then use
|
|
* defaultorder-100 as power of 2 for the buffer size. example:
|
|
* 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size.
|
|
*/
|
|
if(defaultorder >= 100)
|
|
{
|
|
bufs = 1 << (defaultorder-100);
|
|
}
|
|
|
|
#define INTERRUPT_RATE_MS 100 // Interrupt rate in milliseconds.
|
|
db->numfrag = 2;
|
|
/*
|
|
* Nominal frag size(bytes/interrupt)
|
|
*/
|
|
temp1 = bytespersec / (1000 / INTERRUPT_RATE_MS);
|
|
db->fragshift = 8; // Min 256 bytes.
|
|
while (1 << db->fragshift < temp1) // Calc power of 2 frag size.
|
|
db->fragshift += 1;
|
|
db->fragsize = 1 << db->fragshift;
|
|
db->dmasize = db->fragsize * 2;
|
|
db->fragsamples = db->fragsize >> sample_shift; // # samples/fragment.
|
|
|
|
// If the calculated size is larger than the allocated
|
|
// buffer, divide the allocated buffer into 2 fragments.
|
|
if (db->dmasize > bufs) {
|
|
|
|
db->numfrag = 2; // Two fragments.
|
|
db->fragsize = bufs >> 1; // Each 1/2 the alloc'ed buffer.
|
|
db->fragsamples = db->fragsize >> sample_shift; // # samples/fragment.
|
|
db->dmasize = bufs; // Use all the alloc'ed buffer.
|
|
|
|
db->fragshift = 0; // Calculate 'fragshift'.
|
|
temp1 = db->fragsize; // update_ptr() uses it
|
|
while ((temp1 >>= 1) > 1) // to calc 'total-bytes'
|
|
db->fragshift += 1; // returned in DSP_GETI/OPTR.
|
|
}
|
|
CS_DBGOUT(CS_PARMS, 3, printk(KERN_INFO
|
|
"cs4281: prog_dmabuf(): numfrag=%d fragsize=%d fragsamples=%d fragshift=%d bufs=%d fmt=0x%x ch=%d\n",
|
|
db->numfrag, db->fragsize, db->fragsamples,
|
|
db->fragshift, bufs,
|
|
(db->type == CS_TYPE_DAC) ? s->prop_dac.fmt :
|
|
s->prop_adc.fmt,
|
|
(db->type == CS_TYPE_DAC) ? s->prop_dac.channels :
|
|
s->prop_adc.channels));
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: prog_dmabuf()-\n"));
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int prog_dmabuf_adc(struct cs4281_state *s)
|
|
{
|
|
unsigned long va;
|
|
unsigned count;
|
|
int c;
|
|
stop_adc(s);
|
|
s->dma_adc.type = CS_TYPE_ADC;
|
|
if ((c = prog_dmabuf(s, &s->dma_adc)))
|
|
return c;
|
|
|
|
if (s->dma_adc.rawbuf) {
|
|
memset(s->dma_adc.rawbuf,
|
|
(s->prop_adc.
|
|
fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
|
|
s->dma_adc.dmasize);
|
|
}
|
|
if (s->tmpbuff) {
|
|
memset(s->tmpbuff,
|
|
(s->prop_adc.
|
|
fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
|
|
PAGE_SIZE << s->buforder_tmpbuff);
|
|
}
|
|
|
|
va = virt_to_bus(s->dma_adc.rawbuf);
|
|
|
|
count = s->dma_adc.dmasize;
|
|
|
|
if (s->prop_adc.
|
|
fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE))
|
|
count /= 2; // 16-bit.
|
|
|
|
if (s->prop_adc.channels > 1)
|
|
count /= 2; // Assume stereo.
|
|
|
|
CS_DBGOUT(CS_WAVE_READ, 3, printk(KERN_INFO
|
|
"cs4281: prog_dmabuf_adc(): count=%d va=0x%.8x\n",
|
|
count, (unsigned) va));
|
|
|
|
writel(va, s->pBA0 + BA0_DBA1); // Set buffer start address.
|
|
writel(count - 1, s->pBA0 + BA0_DBC1); // Set count.
|
|
s->dma_adc.ready = 1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int prog_dmabuf_dac(struct cs4281_state *s)
|
|
{
|
|
unsigned long va;
|
|
unsigned count;
|
|
int c;
|
|
stop_dac(s);
|
|
s->dma_dac.type = CS_TYPE_DAC;
|
|
if ((c = prog_dmabuf(s, &s->dma_dac)))
|
|
return c;
|
|
memset(s->dma_dac.rawbuf,
|
|
(s->prop_dac.fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
|
|
s->dma_dac.dmasize);
|
|
|
|
va = virt_to_bus(s->dma_dac.rawbuf);
|
|
|
|
count = s->dma_dac.dmasize;
|
|
if (s->prop_dac.
|
|
fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE))
|
|
count /= 2; // 16-bit.
|
|
|
|
if (s->prop_dac.channels > 1)
|
|
count /= 2; // Assume stereo.
|
|
|
|
writel(va, s->pBA0 + BA0_DBA0); // Set buffer start address.
|
|
writel(count - 1, s->pBA0 + BA0_DBC0); // Set count.
|
|
|
|
CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO
|
|
"cs4281: prog_dmabuf_dac(): count=%d va=0x%.8x\n",
|
|
count, (unsigned) va));
|
|
|
|
s->dma_dac.ready = 1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void clear_advance(void *buf, unsigned bsize, unsigned bptr,
|
|
unsigned len, unsigned char c)
|
|
{
|
|
if (bptr + len > bsize) {
|
|
unsigned x = bsize - bptr;
|
|
memset(((char *) buf) + bptr, c, x);
|
|
bptr = 0;
|
|
len -= x;
|
|
}
|
|
CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
|
|
"cs4281: clear_advance(): memset %d at %p for %d size \n",
|
|
(unsigned)c, ((char *) buf) + bptr, len));
|
|
memset(((char *) buf) + bptr, c, len);
|
|
}
|
|
|
|
|
|
|
|
// call with spinlock held!
|
|
static void cs4281_update_ptr(struct cs4281_state *s, int intflag)
|
|
{
|
|
int diff;
|
|
unsigned hwptr, va;
|
|
|
|
// update ADC pointer
|
|
if (s->ena & FMODE_READ) {
|
|
hwptr = readl(s->pBA0 + BA0_DCA1); // Read capture DMA address.
|
|
va = virt_to_bus(s->dma_adc.rawbuf);
|
|
hwptr -= (unsigned) va;
|
|
diff =
|
|
(s->dma_adc.dmasize + hwptr -
|
|
s->dma_adc.hwptr) % s->dma_adc.dmasize;
|
|
s->dma_adc.hwptr = hwptr;
|
|
s->dma_adc.total_bytes += diff;
|
|
s->dma_adc.count += diff;
|
|
if (s->dma_adc.count > s->dma_adc.dmasize)
|
|
s->dma_adc.count = s->dma_adc.dmasize;
|
|
if (s->dma_adc.mapped) {
|
|
if (s->dma_adc.count >=
|
|
(signed) s->dma_adc.fragsize) wake_up(&s->
|
|
dma_adc.
|
|
wait);
|
|
} else {
|
|
if (s->dma_adc.count > 0)
|
|
wake_up(&s->dma_adc.wait);
|
|
}
|
|
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4281: cs4281_update_ptr(): s=%p hwptr=%d total_bytes=%d count=%d \n",
|
|
s, s->dma_adc.hwptr, s->dma_adc.total_bytes, s->dma_adc.count));
|
|
}
|
|
// update DAC pointer
|
|
//
|
|
// check for end of buffer, means that we are going to wait for another interrupt
|
|
// to allow silence to fill the fifos on the part, to keep pops down to a minimum.
|
|
//
|
|
if (s->ena & FMODE_WRITE) {
|
|
hwptr = readl(s->pBA0 + BA0_DCA0); // Read play DMA address.
|
|
va = virt_to_bus(s->dma_dac.rawbuf);
|
|
hwptr -= (unsigned) va;
|
|
diff = (s->dma_dac.dmasize + hwptr -
|
|
s->dma_dac.hwptr) % s->dma_dac.dmasize;
|
|
s->dma_dac.hwptr = hwptr;
|
|
s->dma_dac.total_bytes += diff;
|
|
if (s->dma_dac.mapped) {
|
|
s->dma_dac.count += diff;
|
|
if (s->dma_dac.count >= s->dma_dac.fragsize) {
|
|
s->dma_dac.wakeup = 1;
|
|
wake_up(&s->dma_dac.wait);
|
|
if (s->dma_dac.count > s->dma_dac.dmasize)
|
|
s->dma_dac.count &=
|
|
s->dma_dac.dmasize - 1;
|
|
}
|
|
} else {
|
|
s->dma_dac.count -= diff;
|
|
if (s->dma_dac.count <= 0) {
|
|
//
|
|
// fill with silence, and do not shut down the DAC.
|
|
// Continue to play silence until the _release.
|
|
//
|
|
CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO
|
|
"cs4281: cs4281_update_ptr(): memset %d at %p for %d size \n",
|
|
(unsigned)(s->prop_dac.fmt &
|
|
(AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
|
|
s->dma_dac.rawbuf, s->dma_dac.dmasize));
|
|
memset(s->dma_dac.rawbuf,
|
|
(s->prop_dac.
|
|
fmt & (AFMT_U8 | AFMT_U16_LE)) ?
|
|
0x80 : 0, s->dma_dac.dmasize);
|
|
if (s->dma_dac.count < 0) {
|
|
s->dma_dac.underrun = 1;
|
|
s->dma_dac.count = 0;
|
|
CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO
|
|
"cs4281: cs4281_update_ptr(): underrun\n"));
|
|
}
|
|
} else if (s->dma_dac.count <=
|
|
(signed) s->dma_dac.fragsize
|
|
&& !s->dma_dac.endcleared) {
|
|
clear_advance(s->dma_dac.rawbuf,
|
|
s->dma_dac.dmasize,
|
|
s->dma_dac.swptr,
|
|
s->dma_dac.fragsize,
|
|
(s->prop_dac.
|
|
fmt & (AFMT_U8 |
|
|
AFMT_U16_LE)) ? 0x80
|
|
: 0);
|
|
s->dma_dac.endcleared = 1;
|
|
}
|
|
if ( (s->dma_dac.count <= (signed) s->dma_dac.dmasize/2) ||
|
|
intflag)
|
|
{
|
|
wake_up(&s->dma_dac.wait);
|
|
}
|
|
}
|
|
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4281: cs4281_update_ptr(): s=%p hwptr=%d total_bytes=%d count=%d \n",
|
|
s, s->dma_dac.hwptr, s->dma_dac.total_bytes, s->dma_dac.count));
|
|
}
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static void prog_codec(struct cs4281_state *s, unsigned type)
|
|
{
|
|
unsigned long flags;
|
|
unsigned temp1, format;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: prog_codec()+ \n"));
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (type == CS_TYPE_ADC) {
|
|
temp1 = readl(s->pBA0 + BA0_DCR1);
|
|
writel(temp1 | DCRn_MSK, s->pBA0 + BA0_DCR1); // Stop capture DMA, if active.
|
|
|
|
// program sampling rates
|
|
// Note, for CS4281, capture & play rates can be set independently.
|
|
cs4281_record_rate(s, s->prop_adc.rate);
|
|
|
|
// program ADC parameters
|
|
format = DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE;
|
|
if (s->prop_adc.
|
|
fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) { // 16-bit
|
|
if (s->prop_adc.fmt & (AFMT_S16_BE | AFMT_U16_BE)) // Big-endian?
|
|
format |= DMRn_BEND;
|
|
if (s->prop_adc.fmt & (AFMT_U16_LE | AFMT_U16_BE))
|
|
format |= DMRn_USIGN; // Unsigned.
|
|
} else
|
|
format |= DMRn_SIZE8 | DMRn_USIGN; // 8-bit, unsigned
|
|
if (s->prop_adc.channels < 2)
|
|
format |= DMRn_MONO;
|
|
|
|
writel(format, s->pBA0 + BA0_DMR1);
|
|
|
|
CS_DBGOUT(CS_PARMS, 2, printk(KERN_INFO
|
|
"cs4281: prog_codec(): adc %s %s %s rate=%d DMR0 format=0x%.8x\n",
|
|
(format & DMRn_SIZE8) ? "8" : "16",
|
|
(format & DMRn_USIGN) ? "Unsigned" : "Signed",
|
|
(format & DMRn_MONO) ? "Mono" : "Stereo",
|
|
s->prop_adc.rate, format));
|
|
|
|
s->ena &= ~FMODE_READ; // not capturing data yet
|
|
}
|
|
|
|
|
|
if (type == CS_TYPE_DAC) {
|
|
temp1 = readl(s->pBA0 + BA0_DCR0);
|
|
writel(temp1 | DCRn_MSK, s->pBA0 + BA0_DCR0); // Stop play DMA, if active.
|
|
|
|
// program sampling rates
|
|
// Note, for CS4281, capture & play rates can be set independently.
|
|
cs4281_play_rate(s, s->prop_dac.rate);
|
|
|
|
// program DAC parameters
|
|
format = DMRn_DMA | DMRn_AUTO | DMRn_TR_READ;
|
|
if (s->prop_dac.
|
|
fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) { // 16-bit
|
|
if (s->prop_dac.fmt & (AFMT_S16_BE | AFMT_U16_BE))
|
|
format |= DMRn_BEND; // Big Endian.
|
|
if (s->prop_dac.fmt & (AFMT_U16_LE | AFMT_U16_BE))
|
|
format |= DMRn_USIGN; // Unsigned.
|
|
} else
|
|
format |= DMRn_SIZE8 | DMRn_USIGN; // 8-bit, unsigned
|
|
|
|
if (s->prop_dac.channels < 2)
|
|
format |= DMRn_MONO;
|
|
|
|
writel(format, s->pBA0 + BA0_DMR0);
|
|
|
|
|
|
CS_DBGOUT(CS_PARMS, 2, printk(KERN_INFO
|
|
"cs4281: prog_codec(): dac %s %s %s rate=%d DMR0 format=0x%.8x\n",
|
|
(format & DMRn_SIZE8) ? "8" : "16",
|
|
(format & DMRn_USIGN) ? "Unsigned" : "Signed",
|
|
(format & DMRn_MONO) ? "Mono" : "Stereo",
|
|
s->prop_dac.rate, format));
|
|
|
|
s->ena &= ~FMODE_WRITE; // not capturing data yet
|
|
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: prog_codec()- \n"));
|
|
}
|
|
|
|
|
|
static int mixer_ioctl(struct cs4281_state *s, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
// Index to mixer_src[] is value of AC97 Input Mux Select Reg.
|
|
// Value of array member is recording source Device ID Mask.
|
|
static const unsigned int mixer_src[8] = {
|
|
SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1,
|
|
SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0
|
|
};
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
// Index of mixtable1[] member is Device ID
|
|
// and must be <= SOUND_MIXER_NRDEVICES.
|
|
// Value of array member is index into s->mix.vol[]
|
|
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
|
|
[SOUND_MIXER_PCM] = 1, // voice
|
|
[SOUND_MIXER_LINE1] = 2, // AUX
|
|
[SOUND_MIXER_CD] = 3, // CD
|
|
[SOUND_MIXER_LINE] = 4, // Line
|
|
[SOUND_MIXER_SYNTH] = 5, // FM
|
|
[SOUND_MIXER_MIC] = 6, // Mic
|
|
[SOUND_MIXER_SPEAKER] = 7, // Speaker
|
|
[SOUND_MIXER_RECLEV] = 8, // Recording level
|
|
[SOUND_MIXER_VOLUME] = 9 // Master Volume
|
|
};
|
|
|
|
|
|
static const unsigned mixreg[] = {
|
|
BA0_AC97_PCM_OUT_VOLUME,
|
|
BA0_AC97_AUX_VOLUME,
|
|
BA0_AC97_CD_VOLUME,
|
|
BA0_AC97_LINE_IN_VOLUME
|
|
};
|
|
unsigned char l, r, rl, rr, vidx;
|
|
unsigned char attentbl[11] =
|
|
{ 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 };
|
|
unsigned temp1;
|
|
int i, val;
|
|
|
|
VALIDATE_STATE(s);
|
|
CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO
|
|
"cs4281: mixer_ioctl(): s=%p cmd=0x%.8x\n", s, cmd));
|
|
#if CSDEBUG
|
|
cs_printioctl(cmd);
|
|
#endif
|
|
#if CSDEBUG_INTERFACE
|
|
|
|
if ((cmd == SOUND_MIXER_CS_GETDBGMASK) ||
|
|
(cmd == SOUND_MIXER_CS_SETDBGMASK) ||
|
|
(cmd == SOUND_MIXER_CS_GETDBGLEVEL) ||
|
|
(cmd == SOUND_MIXER_CS_SETDBGLEVEL) ||
|
|
(cmd == SOUND_MIXER_CS_APM))
|
|
{
|
|
switch (cmd) {
|
|
|
|
case SOUND_MIXER_CS_GETDBGMASK:
|
|
return put_user(cs_debugmask,
|
|
(unsigned long __user *) argp);
|
|
|
|
case SOUND_MIXER_CS_GETDBGLEVEL:
|
|
return put_user(cs_debuglevel,
|
|
(unsigned long __user *) argp);
|
|
|
|
case SOUND_MIXER_CS_SETDBGMASK:
|
|
if (get_user(val, (unsigned long __user *) argp))
|
|
return -EFAULT;
|
|
cs_debugmask = val;
|
|
return 0;
|
|
|
|
case SOUND_MIXER_CS_SETDBGLEVEL:
|
|
if (get_user(val, (unsigned long __user *) argp))
|
|
return -EFAULT;
|
|
cs_debuglevel = val;
|
|
return 0;
|
|
#ifndef NOT_CS4281_PM
|
|
case SOUND_MIXER_CS_APM:
|
|
if (get_user(val, (unsigned long __user *) argp))
|
|
return -EFAULT;
|
|
if(val == CS_IOCTL_CMD_SUSPEND)
|
|
cs4281_suspend(s);
|
|
else if(val == CS_IOCTL_CMD_RESUME)
|
|
cs4281_resume(s);
|
|
else
|
|
{
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: mixer_ioctl(): invalid APM cmd (%d)\n",
|
|
val));
|
|
}
|
|
return 0;
|
|
#endif
|
|
default:
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: mixer_ioctl(): ERROR unknown debug cmd\n"));
|
|
return 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (cmd == SOUND_MIXER_PRIVATE1) {
|
|
// enable/disable/query mixer preamp
|
|
if (get_user(val, (int __user *) argp))
|
|
return -EFAULT;
|
|
if (val != -1) {
|
|
cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1);
|
|
temp1 = val ? (temp1 | 0x40) : (temp1 & 0xffbf);
|
|
cs4281_write_ac97(s, BA0_AC97_MIC_VOLUME, temp1);
|
|
}
|
|
cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1);
|
|
val = (temp1 & 0x40) ? 1 : 0;
|
|
return put_user(val, (int __user *) argp);
|
|
}
|
|
if (cmd == SOUND_MIXER_PRIVATE2) {
|
|
// enable/disable/query spatializer
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
if (val != -1) {
|
|
temp1 = (val & 0x3f) >> 2;
|
|
cs4281_write_ac97(s, BA0_AC97_3D_CONTROL, temp1);
|
|
cs4281_read_ac97(s, BA0_AC97_GENERAL_PURPOSE,
|
|
&temp1);
|
|
cs4281_write_ac97(s, BA0_AC97_GENERAL_PURPOSE,
|
|
temp1 | 0x2000);
|
|
}
|
|
cs4281_read_ac97(s, BA0_AC97_3D_CONTROL, &temp1);
|
|
return put_user((temp1 << 2) | 3, (int __user *)argp);
|
|
}
|
|
if (cmd == SOUND_MIXER_INFO) {
|
|
mixer_info info;
|
|
strlcpy(info.id, "CS4281", sizeof(info.id));
|
|
strlcpy(info.name, "Crystal CS4281", sizeof(info.name));
|
|
info.modify_counter = s->mix.modcnt;
|
|
if (copy_to_user(argp, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == SOUND_OLD_MIXER_INFO) {
|
|
_old_mixer_info info;
|
|
strlcpy(info.id, "CS4281", sizeof(info.id));
|
|
strlcpy(info.name, "Crystal CS4281", sizeof(info.name));
|
|
if (copy_to_user(argp, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == OSS_GETVERSION)
|
|
return put_user(SOUND_VERSION, (int __user *) argp);
|
|
|
|
if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
|
|
return -EINVAL;
|
|
|
|
// If ioctl has only the SIOC_READ bit(bit 31)
|
|
// on, process the only-read commands.
|
|
if (_SIOC_DIR(cmd) == _SIOC_READ) {
|
|
switch (_IOC_NR(cmd)) {
|
|
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
|
|
cs4281_read_ac97(s, BA0_AC97_RECORD_SELECT, &temp1);
|
|
return put_user(mixer_src[temp1&7], (int __user *)argp);
|
|
|
|
case SOUND_MIXER_DEVMASK: // Arg contains a bit for each supported device
|
|
return put_user(SOUND_MASK_PCM | SOUND_MASK_SYNTH |
|
|
SOUND_MASK_CD | SOUND_MASK_LINE |
|
|
SOUND_MASK_LINE1 | SOUND_MASK_MIC |
|
|
SOUND_MASK_VOLUME |
|
|
SOUND_MASK_RECLEV |
|
|
SOUND_MASK_SPEAKER, (int __user *)argp);
|
|
|
|
case SOUND_MIXER_RECMASK: // Arg contains a bit for each supported recording source
|
|
return put_user(SOUND_MASK_LINE | SOUND_MASK_MIC |
|
|
SOUND_MASK_CD | SOUND_MASK_VOLUME |
|
|
SOUND_MASK_LINE1, (int __user *) argp);
|
|
|
|
case SOUND_MIXER_STEREODEVS: // Mixer channels supporting stereo
|
|
return put_user(SOUND_MASK_PCM | SOUND_MASK_SYNTH |
|
|
SOUND_MASK_CD | SOUND_MASK_LINE |
|
|
SOUND_MASK_LINE1 | SOUND_MASK_MIC |
|
|
SOUND_MASK_VOLUME |
|
|
SOUND_MASK_RECLEV, (int __user *)argp);
|
|
|
|
case SOUND_MIXER_CAPS:
|
|
return put_user(SOUND_CAP_EXCL_INPUT, (int __user *)argp);
|
|
|
|
default:
|
|
i = _IOC_NR(cmd);
|
|
if (i >= SOUND_MIXER_NRDEVICES
|
|
|| !(vidx = mixtable1[i]))
|
|
return -EINVAL;
|
|
return put_user(s->mix.vol[vidx - 1], (int __user *)argp);
|
|
}
|
|
}
|
|
// If ioctl doesn't have both the SIOC_READ and
|
|
// the SIOC_WRITE bit set, return invalid.
|
|
if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE))
|
|
return -EINVAL;
|
|
|
|
// Increment the count of volume writes.
|
|
s->mix.modcnt++;
|
|
|
|
// Isolate the command; it must be a write.
|
|
switch (_IOC_NR(cmd)) {
|
|
|
|
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
i = hweight32(val); // i = # bits on in val.
|
|
if (i != 1) // One & only 1 bit must be on.
|
|
return 0;
|
|
for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) {
|
|
if (val == mixer_src[i]) {
|
|
temp1 = (i << 8) | i;
|
|
cs4281_write_ac97(s,
|
|
BA0_AC97_RECORD_SELECT,
|
|
temp1);
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
case SOUND_MIXER_VOLUME:
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100; // Max soundcard.h vol is 100.
|
|
if (l < 6) {
|
|
rl = 63;
|
|
l = 0;
|
|
} else
|
|
rl = attentbl[(10 * l) / 100]; // Convert 0-100 vol to 63-0 atten.
|
|
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100; // Max right volume is 100, too
|
|
if (r < 6) {
|
|
rr = 63;
|
|
r = 0;
|
|
} else
|
|
rr = attentbl[(10 * r) / 100]; // Convert volume to attenuation.
|
|
|
|
if ((rl > 60) && (rr > 60)) // If both l & r are 'low',
|
|
temp1 = 0x8000; // turn on the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
|
|
temp1 |= (rl << 8) | rr;
|
|
|
|
cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME, temp1);
|
|
cs4281_write_ac97(s, BA0_AC97_HEADPHONE_VOLUME, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[8] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[8] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[8], (int __user *)argp);
|
|
|
|
case SOUND_MIXER_SPEAKER:
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 3) {
|
|
rl = 0;
|
|
l = 0;
|
|
} else {
|
|
rl = (l * 2 - 5) / 13; // Convert 0-100 range to 0-15.
|
|
l = (rl * 13 + 5) / 2;
|
|
}
|
|
|
|
if (rl < 3) {
|
|
temp1 = 0x8000;
|
|
rl = 0;
|
|
} else
|
|
temp1 = 0;
|
|
rl = 15 - rl; // Convert volume to attenuation.
|
|
temp1 |= rl << 1;
|
|
cs4281_write_ac97(s, BA0_AC97_PC_BEEP_VOLUME, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[6] = l << 8;
|
|
#else
|
|
s->mix.vol[6] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[6], (int __user *)argp);
|
|
|
|
case SOUND_MIXER_RECLEV:
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
rl = (l * 2 - 5) / 13; // Convert 0-100 scale to 0-15.
|
|
rr = (r * 2 - 5) / 13;
|
|
if (rl < 3 && rr < 3)
|
|
temp1 = 0x8000;
|
|
else
|
|
temp1 = 0;
|
|
|
|
temp1 = temp1 | (rl << 8) | rr;
|
|
cs4281_write_ac97(s, BA0_AC97_RECORD_GAIN, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[7] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[7] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[7], (int __user *)argp);
|
|
|
|
case SOUND_MIXER_MIC:
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 1) {
|
|
l = 0;
|
|
rl = 0;
|
|
} else {
|
|
rl = ((unsigned) l * 5 - 4) / 16; // Convert 0-100 range to 0-31.
|
|
l = (rl * 16 + 4) / 5;
|
|
}
|
|
cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1);
|
|
temp1 &= 0x40; // Isolate 20db gain bit.
|
|
if (rl < 3) {
|
|
temp1 |= 0x8000;
|
|
rl = 0;
|
|
}
|
|
rl = 31 - rl; // Convert volume to attenuation.
|
|
temp1 |= rl;
|
|
cs4281_write_ac97(s, BA0_AC97_MIC_VOLUME, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[5] = val << 8;
|
|
#else
|
|
s->mix.vol[5] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[5], (int __user *)argp);
|
|
|
|
|
|
case SOUND_MIXER_SYNTH:
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
rl = (l * 2 - 11) / 3; // Convert 0-100 range to 0-63.
|
|
rr = (r * 2 - 11) / 3;
|
|
if (rl < 3) // If l is low, turn on
|
|
temp1 = 0x0080; // the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
|
|
rl = 63 - rl; // Convert vol to attenuation.
|
|
writel(temp1 | rl, s->pBA0 + BA0_FMLVC);
|
|
if (rr < 3) // If rr is low, turn on
|
|
temp1 = 0x0080; // the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
rr = 63 - rr; // Convert vol to attenuation.
|
|
writel(temp1 | rr, s->pBA0 + BA0_FMRVC);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[4] = (r << 8) | l;
|
|
#else
|
|
s->mix.vol[4] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[4], (int __user *)argp);
|
|
|
|
|
|
default:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4281: mixer_ioctl(): default\n"));
|
|
|
|
i = _IOC_NR(cmd);
|
|
if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i]))
|
|
return -EINVAL;
|
|
if (get_user(val, (int __user *)argp))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 1) {
|
|
l = 0;
|
|
rl = 31;
|
|
} else
|
|
rl = (attentbl[(l * 10) / 100]) >> 1;
|
|
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
if (r < 1) {
|
|
r = 0;
|
|
rr = 31;
|
|
} else
|
|
rr = (attentbl[(r * 10) / 100]) >> 1;
|
|
if ((rl > 30) && (rr > 30))
|
|
temp1 = 0x8000;
|
|
else
|
|
temp1 = 0;
|
|
temp1 = temp1 | (rl << 8) | rr;
|
|
cs4281_write_ac97(s, mixreg[vidx - 1], temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[vidx - 1] = val;
|
|
#endif
|
|
#ifndef NOT_CS4281_PM
|
|
CS_DBGOUT(CS_PM, 9, printk(KERN_INFO
|
|
"write ac97 mixreg[%d]=0x%x mix.vol[]=0x%x\n",
|
|
vidx-1,temp1,s->mix.vol[vidx-1]));
|
|
#endif
|
|
return put_user(s->mix.vol[vidx - 1], (int __user *)argp);
|
|
}
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static int cs4281_open_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
unsigned int minor = iminor(inode);
|
|
struct cs4281_state *s=NULL;
|
|
struct list_head *entry;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_open_mixdev()+\n"));
|
|
|
|
list_for_each(entry, &cs4281_devs)
|
|
{
|
|
s = list_entry(entry, struct cs4281_state, list);
|
|
if(s->dev_mixer == minor)
|
|
break;
|
|
}
|
|
if (!s)
|
|
{
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_open_mixdev()- -ENODEV\n"));
|
|
return -ENODEV;
|
|
}
|
|
VALIDATE_STATE(s);
|
|
file->private_data = s;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_open_mixdev()- 0\n"));
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
|
|
static int cs4281_release_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
|
|
VALIDATE_STATE(s);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int cs4281_ioctl_mixdev(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return mixer_ioctl((struct cs4281_state *) file->private_data, cmd,
|
|
arg);
|
|
}
|
|
|
|
|
|
// ******************************************************************************************
|
|
// Mixer file operations struct.
|
|
// ******************************************************************************************
|
|
static /*const */ struct file_operations cs4281_mixer_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.ioctl = cs4281_ioctl_mixdev,
|
|
.open = cs4281_open_mixdev,
|
|
.release = cs4281_release_mixdev,
|
|
};
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
|
|
static int drain_adc(struct cs4281_state *s, int nonblock)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
int count;
|
|
unsigned tmo;
|
|
|
|
if (s->dma_adc.mapped)
|
|
return 0;
|
|
add_wait_queue(&s->dma_adc.wait, &wait);
|
|
for (;;) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
count = s->dma_adc.count;
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: drain_adc() %d\n", count));
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (count <= 0) {
|
|
CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4281: drain_adc() count<0\n"));
|
|
break;
|
|
}
|
|
if (signal_pending(current))
|
|
break;
|
|
if (nonblock) {
|
|
remove_wait_queue(&s->dma_adc.wait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
return -EBUSY;
|
|
}
|
|
tmo =
|
|
3 * HZ * (count +
|
|
s->dma_adc.fragsize) / 2 / s->prop_adc.rate;
|
|
if (s->prop_adc.fmt & (AFMT_S16_LE | AFMT_U16_LE))
|
|
tmo >>= 1;
|
|
if (s->prop_adc.channels > 1)
|
|
tmo >>= 1;
|
|
if (!schedule_timeout(tmo + 1))
|
|
printk(KERN_DEBUG "cs4281: dma timed out??\n");
|
|
}
|
|
remove_wait_queue(&s->dma_adc.wait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
return 0;
|
|
}
|
|
|
|
static int drain_dac(struct cs4281_state *s, int nonblock)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
int count;
|
|
unsigned tmo;
|
|
|
|
if (s->dma_dac.mapped)
|
|
return 0;
|
|
add_wait_queue(&s->dma_dac.wait, &wait);
|
|
for (;;) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
count = s->dma_dac.count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (count <= 0)
|
|
break;
|
|
if (signal_pending(current))
|
|
break;
|
|
if (nonblock) {
|
|
remove_wait_queue(&s->dma_dac.wait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
return -EBUSY;
|
|
}
|
|
tmo =
|
|
3 * HZ * (count +
|
|
s->dma_dac.fragsize) / 2 / s->prop_dac.rate;
|
|
if (s->prop_dac.fmt & (AFMT_S16_LE | AFMT_U16_LE))
|
|
tmo >>= 1;
|
|
if (s->prop_dac.channels > 1)
|
|
tmo >>= 1;
|
|
if (!schedule_timeout(tmo + 1))
|
|
printk(KERN_DEBUG "cs4281: dma timed out??\n");
|
|
}
|
|
remove_wait_queue(&s->dma_dac.wait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
return 0;
|
|
}
|
|
|
|
//****************************************************************************
|
|
//
|
|
// CopySamples copies 16-bit stereo samples from the source to the
|
|
// destination, possibly converting down to either 8-bit or mono or both.
|
|
// count specifies the number of output bytes to write.
|
|
//
|
|
// Arguments:
|
|
//
|
|
// dst - Pointer to a destination buffer.
|
|
// src - Pointer to a source buffer
|
|
// count - The number of bytes to copy into the destination buffer.
|
|
// iChannels - Stereo - 2
|
|
// Mono - 1
|
|
// fmt - AFMT_xxx (soundcard.h formats)
|
|
//
|
|
// NOTES: only call this routine for conversion to 8bit from 16bit
|
|
//
|
|
//****************************************************************************
|
|
static void CopySamples(char *dst, char *src, int count, int iChannels,
|
|
unsigned fmt)
|
|
{
|
|
|
|
unsigned short *psSrc;
|
|
long lAudioSample;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: CopySamples()+ "));
|
|
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
|
|
" dst=%p src=%p count=%d iChannels=%d fmt=0x%x\n",
|
|
dst, src, (unsigned) count, (unsigned) iChannels, (unsigned) fmt));
|
|
|
|
// Gershwin does format conversion in hardware so normally
|
|
// we don't do any host based coversion. The data formatter
|
|
// truncates 16 bit data to 8 bit and that causes some hiss.
|
|
// We have already forced the HW to do 16 bit sampling and
|
|
// 2 channel so that we can use software to round instead
|
|
// of truncate
|
|
|
|
//
|
|
// See if the data should be output as 8-bit unsigned stereo.
|
|
// or if the data should be output at 8-bit unsigned mono.
|
|
//
|
|
if ( ((iChannels == 2) && (fmt & AFMT_U8)) ||
|
|
((iChannels == 1) && (fmt & AFMT_U8)) ) {
|
|
//
|
|
// Convert each 16-bit unsigned stereo sample to 8-bit unsigned
|
|
// stereo using rounding.
|
|
//
|
|
psSrc = (unsigned short *) src;
|
|
count = count / 2;
|
|
while (count--) {
|
|
lAudioSample = (long) psSrc[count] + (long) 0x80;
|
|
if (lAudioSample > 0xffff) {
|
|
lAudioSample = 0xffff;
|
|
}
|
|
dst[count] = (char) (lAudioSample >> 8);
|
|
}
|
|
}
|
|
//
|
|
// check for 8-bit signed stereo.
|
|
//
|
|
else if ((iChannels == 2) && (fmt & AFMT_S8)) {
|
|
//
|
|
// Convert each 16-bit stereo sample to 8-bit stereo using rounding.
|
|
//
|
|
psSrc = (short *) src;
|
|
while (count--) {
|
|
lAudioSample =
|
|
(((long) psSrc[0] + (long) psSrc[1]) / 2);
|
|
psSrc += 2;
|
|
*dst++ = (char) ((short) lAudioSample >> 8);
|
|
}
|
|
}
|
|
//
|
|
// Otherwise, the data should be output as 8-bit signed mono.
|
|
//
|
|
else if ((iChannels == 1) && (fmt & AFMT_S8)) {
|
|
//
|
|
// Convert each 16-bit signed mono sample to 8-bit signed mono
|
|
// using rounding.
|
|
//
|
|
psSrc = (short *) src;
|
|
count = count / 2;
|
|
while (count--) {
|
|
lAudioSample =
|
|
(((long) psSrc[0] + (long) psSrc[1]) / 2);
|
|
if (lAudioSample > 0x7fff) {
|
|
lAudioSample = 0x7fff;
|
|
}
|
|
psSrc += 2;
|
|
*dst++ = (char) ((short) lAudioSample >> 8);
|
|
}
|
|
}
|
|
}
|
|
|
|
//
|
|
// cs_copy_to_user()
|
|
// replacement for the standard copy_to_user, to allow for a conversion from
|
|
// 16 bit to 8 bit if the record conversion is active. the cs4281 has some
|
|
// issues with 8 bit capture, so the driver always captures data in 16 bit
|
|
// and then if the user requested 8 bit, converts from 16 to 8 bit.
|
|
//
|
|
static unsigned cs_copy_to_user(struct cs4281_state *s, void __user *dest,
|
|
unsigned *hwsrc, unsigned cnt,
|
|
unsigned *copied)
|
|
{
|
|
void *src = hwsrc; //default to the standard destination buffer addr
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 6, printk(KERN_INFO
|
|
"cs_copy_to_user()+ fmt=0x%x fmt_o=0x%x cnt=%d dest=%p\n",
|
|
s->prop_adc.fmt, s->prop_adc.fmt_original,
|
|
(unsigned) cnt, dest));
|
|
|
|
if (cnt > s->dma_adc.dmasize) {
|
|
cnt = s->dma_adc.dmasize;
|
|
}
|
|
if (!cnt) {
|
|
*copied = 0;
|
|
return 0;
|
|
}
|
|
if (s->conversion) {
|
|
if (!s->tmpbuff) {
|
|
*copied = cnt / 2;
|
|
return 0;
|
|
}
|
|
CopySamples(s->tmpbuff, (void *) hwsrc, cnt,
|
|
(unsigned) s->prop_adc.channels,
|
|
s->prop_adc.fmt_original);
|
|
src = s->tmpbuff;
|
|
cnt = cnt / 2;
|
|
}
|
|
|
|
if (copy_to_user(dest, src, cnt)) {
|
|
*copied = 0;
|
|
return -EFAULT;
|
|
}
|
|
*copied = cnt;
|
|
CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4281: cs_copy_to_user()- copied bytes is %d \n", cnt));
|
|
return 0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static ssize_t cs4281_read(struct file *file, char __user *buffer, size_t count,
|
|
loff_t * ppos)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned swptr;
|
|
int cnt;
|
|
unsigned copied = 0;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_read()+ %Zu \n", count));
|
|
|
|
VALIDATE_STATE(s);
|
|
if (s->dma_adc.mapped)
|
|
return -ENXIO;
|
|
if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_WRITE, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
//
|
|
// "count" is the amount of bytes to read (from app), is decremented each loop
|
|
// by the amount of bytes that have been returned to the user buffer.
|
|
// "cnt" is the running total of each read from the buffer (changes each loop)
|
|
// "buffer" points to the app's buffer
|
|
// "ret" keeps a running total of the amount of bytes that have been copied
|
|
// to the user buffer.
|
|
// "copied" is the total bytes copied into the user buffer for each loop.
|
|
//
|
|
while (count > 0) {
|
|
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
|
|
"_read() count>0 count=%Zu .count=%d .swptr=%d .hwptr=%d \n",
|
|
count, s->dma_adc.count,
|
|
s->dma_adc.swptr, s->dma_adc.hwptr));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
|
|
// get the current copy point of the sw buffer
|
|
swptr = s->dma_adc.swptr;
|
|
|
|
// cnt is the amount of unread bytes from the end of the
|
|
// hw buffer to the current sw pointer
|
|
cnt = s->dma_adc.dmasize - swptr;
|
|
|
|
// dma_adc.count is the current total bytes that have not been read.
|
|
// if the amount of unread bytes from the current sw pointer to the
|
|
// end of the buffer is greater than the current total bytes that
|
|
// have not been read, then set the "cnt" (unread bytes) to the
|
|
// amount of unread bytes.
|
|
|
|
if (s->dma_adc.count < cnt)
|
|
cnt = s->dma_adc.count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
//
|
|
// if we are converting from 8/16 then we need to copy
|
|
// twice the number of 16 bit bytes then 8 bit bytes.
|
|
//
|
|
if (s->conversion) {
|
|
if (cnt > (count * 2))
|
|
cnt = (count * 2);
|
|
} else {
|
|
if (cnt > count)
|
|
cnt = count;
|
|
}
|
|
//
|
|
// "cnt" NOW is the smaller of the amount that will be read,
|
|
// and the amount that is requested in this read (or partial).
|
|
// if there are no bytes in the buffer to read, then start the
|
|
// ADC and wait for the interrupt handler to wake us up.
|
|
//
|
|
if (cnt <= 0) {
|
|
|
|
// start up the dma engine and then continue back to the top of
|
|
// the loop when wake up occurs.
|
|
start_adc(s);
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&s->dma_adc.wait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
// there are bytes in the buffer to read.
|
|
// copy from the hw buffer over to the user buffer.
|
|
// user buffer is designated by "buffer"
|
|
// virtual address to copy from is rawbuf+swptr
|
|
// the "cnt" is the number of bytes to read.
|
|
|
|
CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO
|
|
"_read() copy_to cnt=%d count=%Zu ", cnt, count));
|
|
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
|
|
" .dmasize=%d .count=%d buffer=%p ret=%Zd\n",
|
|
s->dma_adc.dmasize, s->dma_adc.count, buffer, ret));
|
|
|
|
if (cs_copy_to_user
|
|
(s, buffer, s->dma_adc.rawbuf + swptr, cnt, &copied))
|
|
return ret ? ret : -EFAULT;
|
|
swptr = (swptr + cnt) % s->dma_adc.dmasize;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->dma_adc.swptr = swptr;
|
|
s->dma_adc.count -= cnt;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= copied;
|
|
buffer += copied;
|
|
ret += copied;
|
|
start_adc(s);
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_read()- %Zd\n", ret));
|
|
return ret;
|
|
}
|
|
|
|
|
|
static ssize_t cs4281_write(struct file *file, const char __user *buffer,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned swptr, hwptr, busaddr;
|
|
int cnt;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_write()+ count=%Zu\n",
|
|
count));
|
|
VALIDATE_STATE(s);
|
|
|
|
if (s->dma_dac.mapped)
|
|
return -ENXIO;
|
|
if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_READ, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
while (count > 0) {
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (s->dma_dac.count < 0) {
|
|
s->dma_dac.count = 0;
|
|
s->dma_dac.swptr = s->dma_dac.hwptr;
|
|
}
|
|
if (s->dma_dac.underrun) {
|
|
s->dma_dac.underrun = 0;
|
|
hwptr = readl(s->pBA0 + BA0_DCA0);
|
|
busaddr = virt_to_bus(s->dma_dac.rawbuf);
|
|
hwptr -= (unsigned) busaddr;
|
|
s->dma_dac.swptr = s->dma_dac.hwptr = hwptr;
|
|
}
|
|
swptr = s->dma_dac.swptr;
|
|
cnt = s->dma_dac.dmasize - swptr;
|
|
if (s->dma_dac.count + cnt > s->dma_dac.dmasize)
|
|
cnt = s->dma_dac.dmasize - s->dma_dac.count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
start_dac(s);
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&s->dma_dac.wait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
if (copy_from_user(s->dma_dac.rawbuf + swptr, buffer, cnt))
|
|
return ret ? ret : -EFAULT;
|
|
swptr = (swptr + cnt) % s->dma_dac.dmasize;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->dma_dac.swptr = swptr;
|
|
s->dma_dac.count += cnt;
|
|
s->dma_dac.endcleared = 0;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
start_dac(s);
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_write()- %Zd\n", ret));
|
|
return ret;
|
|
}
|
|
|
|
|
|
static unsigned int cs4281_poll(struct file *file,
|
|
struct poll_table_struct *wait)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
unsigned long flags;
|
|
unsigned int mask = 0;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_poll()+\n"));
|
|
VALIDATE_STATE(s);
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO
|
|
"cs4281: cs4281_poll() wait on FMODE_WRITE\n"));
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
poll_wait(file, &s->dma_dac.wait, wait);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO
|
|
"cs4281: cs4281_poll() wait on FMODE_READ\n"));
|
|
if(!s->dma_dac.ready && prog_dmabuf_adc(s))
|
|
return 0;
|
|
poll_wait(file, &s->dma_adc.wait, wait);
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (s->dma_dac.mapped) {
|
|
if (s->dma_dac.count >=
|
|
(signed) s->dma_dac.fragsize) {
|
|
if (s->dma_dac.wakeup)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
else
|
|
mask = 0;
|
|
s->dma_dac.wakeup = 0;
|
|
}
|
|
} else {
|
|
if ((signed) (s->dma_dac.dmasize/2) >= s->dma_dac.count)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
}
|
|
} else if (file->f_mode & FMODE_READ) {
|
|
if (s->dma_adc.mapped) {
|
|
if (s->dma_adc.count >= (signed) s->dma_adc.fragsize)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
} else {
|
|
if (s->dma_adc.count > 0)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_poll()- 0x%.8x\n",
|
|
mask));
|
|
return mask;
|
|
}
|
|
|
|
|
|
static int cs4281_mmap(struct file *file, struct vm_area_struct *vma)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
struct dmabuf *db;
|
|
int ret;
|
|
unsigned long size;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_PARMS | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_mmap()+\n"));
|
|
|
|
VALIDATE_STATE(s);
|
|
if (vma->vm_flags & VM_WRITE) {
|
|
if ((ret = prog_dmabuf_dac(s)) != 0)
|
|
return ret;
|
|
db = &s->dma_dac;
|
|
} else if (vma->vm_flags & VM_READ) {
|
|
if ((ret = prog_dmabuf_adc(s)) != 0)
|
|
return ret;
|
|
db = &s->dma_adc;
|
|
} else
|
|
return -EINVAL;
|
|
//
|
|
// only support PLAYBACK for now
|
|
//
|
|
db = &s->dma_dac;
|
|
|
|
if (cs4x_pgoff(vma) != 0)
|
|
return -EINVAL;
|
|
size = vma->vm_end - vma->vm_start;
|
|
if (size > (PAGE_SIZE << db->buforder))
|
|
return -EINVAL;
|
|
if (remap_pfn_range(vma, vma->vm_start,
|
|
virt_to_phys(db->rawbuf) >> PAGE_SHIFT,
|
|
size, vma->vm_page_prot))
|
|
return -EAGAIN;
|
|
db->mapped = 1;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_PARMS | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4281: cs4281_mmap()- 0 size=%d\n",
|
|
(unsigned) size));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int cs4281_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
unsigned long flags;
|
|
audio_buf_info abinfo;
|
|
count_info cinfo;
|
|
int val, mapped, ret;
|
|
int __user *p = (int __user *)arg;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): file=%p cmd=0x%.8x\n", file, cmd));
|
|
#if CSDEBUG
|
|
cs_printioctl(cmd);
|
|
#endif
|
|
VALIDATE_STATE(s);
|
|
mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) ||
|
|
((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
|
|
switch (cmd) {
|
|
case OSS_GETVERSION:
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): SOUND_VERSION=0x%.8x\n",
|
|
SOUND_VERSION));
|
|
return put_user(SOUND_VERSION, p);
|
|
|
|
case SNDCTL_DSP_SYNC:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_SYNC\n"));
|
|
if (file->f_mode & FMODE_WRITE)
|
|
return drain_dac(s,
|
|
0 /*file->f_flags & O_NONBLOCK */
|
|
);
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETCAPS:
|
|
return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME |
|
|
DSP_CAP_TRIGGER | DSP_CAP_MMAP,
|
|
p);
|
|
|
|
case SNDCTL_DSP_RESET:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_RESET\n"));
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
synchronize_irq(s->irq);
|
|
s->dma_dac.swptr = s->dma_dac.hwptr =
|
|
s->dma_dac.count = s->dma_dac.total_bytes =
|
|
s->dma_dac.blocks = s->dma_dac.wakeup = 0;
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
synchronize_irq(s->irq);
|
|
s->dma_adc.swptr = s->dma_adc.hwptr =
|
|
s->dma_adc.count = s->dma_adc.total_bytes =
|
|
s->dma_adc.blocks = s->dma_dac.wakeup = 0;
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SPEED:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_SPEED val=%d\n", val));
|
|
//
|
|
// support independent capture and playback channels
|
|
// assume that the file mode bit determines the
|
|
// direction of the data flow.
|
|
//
|
|
if (file->f_mode & FMODE_READ) {
|
|
if (val >= 0) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
// program sampling rates
|
|
if (val > 48000)
|
|
val = 48000;
|
|
if (val < 6300)
|
|
val = 6300;
|
|
s->prop_adc.rate = val;
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (val >= 0) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
// program sampling rates
|
|
if (val > 48000)
|
|
val = 48000;
|
|
if (val < 6300)
|
|
val = 6300;
|
|
s->prop_dac.rate = val;
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
}
|
|
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = s->prop_dac.rate;
|
|
else if (file->f_mode & FMODE_READ)
|
|
val = s->prop_adc.rate;
|
|
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_STEREO:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_STEREO val=%d\n", val));
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
s->prop_adc.channels = val ? 2 : 1;
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
s->prop_dac.channels = val ? 2 : 1;
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_CHANNELS:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_CHANNELS val=%d\n",
|
|
val));
|
|
if (val != 0) {
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
if (val >= 2)
|
|
s->prop_adc.channels = 2;
|
|
else
|
|
s->prop_adc.channels = 1;
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
if (val >= 2)
|
|
s->prop_dac.channels = 2;
|
|
else
|
|
s->prop_dac.channels = 1;
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
}
|
|
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = s->prop_dac.channels;
|
|
else if (file->f_mode & FMODE_READ)
|
|
val = s->prop_adc.channels;
|
|
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_GETFMTS: // Returns a mask
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_GETFMT val=0x%.8x\n",
|
|
AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
|
|
AFMT_U8));
|
|
return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
|
|
AFMT_U8, p);
|
|
|
|
case SNDCTL_DSP_SETFMT:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_SETFMT val=0x%.8x\n",
|
|
val));
|
|
if (val != AFMT_QUERY) {
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
if (val != AFMT_S16_LE
|
|
&& val != AFMT_U16_LE && val != AFMT_S8
|
|
&& val != AFMT_U8)
|
|
val = AFMT_U8;
|
|
s->prop_adc.fmt = val;
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
if (val != AFMT_S16_LE
|
|
&& val != AFMT_U16_LE && val != AFMT_S8
|
|
&& val != AFMT_U8)
|
|
val = AFMT_U8;
|
|
s->prop_dac.fmt = val;
|
|
s->prop_dac.fmt_original = s->prop_dac.fmt;
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
} else {
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = s->prop_dac.fmt_original;
|
|
else if (file->f_mode & FMODE_READ)
|
|
val = s->prop_adc.fmt_original;
|
|
}
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_SETFMT return val=0x%.8x\n",
|
|
val));
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_POST:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): DSP_POST\n"));
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETTRIGGER:
|
|
val = 0;
|
|
if (file->f_mode & s->ena & FMODE_READ)
|
|
val |= PCM_ENABLE_INPUT;
|
|
if (file->f_mode & s->ena & FMODE_WRITE)
|
|
val |= PCM_ENABLE_OUTPUT;
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_SETTRIGGER:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
if (file->f_mode & FMODE_READ) {
|
|
if (val & PCM_ENABLE_INPUT) {
|
|
if (!s->dma_adc.ready
|
|
&& (ret = prog_dmabuf_adc(s)))
|
|
return ret;
|
|
start_adc(s);
|
|
} else
|
|
stop_adc(s);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (val & PCM_ENABLE_OUTPUT) {
|
|
if (!s->dma_dac.ready
|
|
&& (ret = prog_dmabuf_dac(s)))
|
|
return ret;
|
|
start_dac(s);
|
|
} else
|
|
stop_dac(s);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETOSPACE:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s)))
|
|
return val;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
abinfo.fragsize = s->dma_dac.fragsize;
|
|
if (s->dma_dac.mapped)
|
|
abinfo.bytes = s->dma_dac.dmasize;
|
|
else
|
|
abinfo.bytes =
|
|
s->dma_dac.dmasize - s->dma_dac.count;
|
|
abinfo.fragstotal = s->dma_dac.numfrag;
|
|
abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
|
|
CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4281: cs4281_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n",
|
|
abinfo.fragsize,abinfo.bytes,abinfo.fragstotal,
|
|
abinfo.fragments));
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user(p, &abinfo,
|
|
sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETISPACE:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)))
|
|
return val;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
if (s->conversion) {
|
|
abinfo.fragsize = s->dma_adc.fragsize / 2;
|
|
abinfo.bytes = s->dma_adc.count / 2;
|
|
abinfo.fragstotal = s->dma_adc.numfrag;
|
|
abinfo.fragments =
|
|
abinfo.bytes >> (s->dma_adc.fragshift - 1);
|
|
} else {
|
|
abinfo.fragsize = s->dma_adc.fragsize;
|
|
abinfo.bytes = s->dma_adc.count;
|
|
abinfo.fragstotal = s->dma_adc.numfrag;
|
|
abinfo.fragments =
|
|
abinfo.bytes >> s->dma_adc.fragshift;
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user(p, &abinfo,
|
|
sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
file->f_flags |= O_NONBLOCK;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETODELAY:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
val = s->dma_dac.count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_GETIPTR:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if(!s->dma_adc.ready && prog_dmabuf_adc(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
cinfo.bytes = s->dma_adc.total_bytes;
|
|
if (s->dma_adc.mapped) {
|
|
cinfo.blocks =
|
|
(cinfo.bytes >> s->dma_adc.fragshift) -
|
|
s->dma_adc.blocks;
|
|
s->dma_adc.blocks =
|
|
cinfo.bytes >> s->dma_adc.fragshift;
|
|
} else {
|
|
if (s->conversion) {
|
|
cinfo.blocks =
|
|
s->dma_adc.count /
|
|
2 >> (s->dma_adc.fragshift - 1);
|
|
} else
|
|
cinfo.blocks =
|
|
s->dma_adc.count >> s->dma_adc.
|
|
fragshift;
|
|
}
|
|
if (s->conversion)
|
|
cinfo.ptr = s->dma_adc.hwptr / 2;
|
|
else
|
|
cinfo.ptr = s->dma_adc.hwptr;
|
|
if (s->dma_adc.mapped)
|
|
s->dma_adc.count &= s->dma_adc.fragsize - 1;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (copy_to_user(p, &cinfo, sizeof(cinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETOPTR:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_update_ptr(s,CS_FALSE);
|
|
cinfo.bytes = s->dma_dac.total_bytes;
|
|
if (s->dma_dac.mapped) {
|
|
cinfo.blocks =
|
|
(cinfo.bytes >> s->dma_dac.fragshift) -
|
|
s->dma_dac.blocks;
|
|
s->dma_dac.blocks =
|
|
cinfo.bytes >> s->dma_dac.fragshift;
|
|
} else {
|
|
cinfo.blocks =
|
|
s->dma_dac.count >> s->dma_dac.fragshift;
|
|
}
|
|
cinfo.ptr = s->dma_dac.hwptr;
|
|
if (s->dma_dac.mapped)
|
|
s->dma_dac.count &= s->dma_dac.fragsize - 1;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (copy_to_user(p, &cinfo, sizeof(cinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if ((val = prog_dmabuf_dac(s)))
|
|
return val;
|
|
return put_user(s->dma_dac.fragsize, p);
|
|
}
|
|
if ((val = prog_dmabuf_adc(s)))
|
|
return val;
|
|
if (s->conversion)
|
|
return put_user(s->dma_adc.fragsize / 2, p);
|
|
else
|
|
return put_user(s->dma_adc.fragsize, p);
|
|
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
return 0; // Say OK, but do nothing.
|
|
|
|
case SNDCTL_DSP_SUBDIVIDE:
|
|
if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision)
|
|
|| (file->f_mode & FMODE_WRITE
|
|
&& s->dma_dac.subdivision)) return -EINVAL;
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
if (val != 1 && val != 2 && val != 4)
|
|
return -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
s->dma_adc.subdivision = val;
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
s->dma_dac.subdivision = val;
|
|
return 0;
|
|
|
|
case SOUND_PCM_READ_RATE:
|
|
if (file->f_mode & FMODE_READ)
|
|
return put_user(s->prop_adc.rate, p);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return put_user(s->prop_dac.rate, p);
|
|
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
if (file->f_mode & FMODE_READ)
|
|
return put_user(s->prop_adc.channels, p);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return put_user(s->prop_dac.channels, p);
|
|
|
|
case SOUND_PCM_READ_BITS:
|
|
if (file->f_mode & FMODE_READ)
|
|
return
|
|
put_user(
|
|
(s->prop_adc.
|
|
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
|
|
p);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return
|
|
put_user(
|
|
(s->prop_dac.
|
|
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
|
|
p);
|
|
|
|
case SOUND_PCM_WRITE_FILTER:
|
|
case SNDCTL_DSP_SETSYNCRO:
|
|
case SOUND_PCM_READ_FILTER:
|
|
return -EINVAL;
|
|
}
|
|
return mixer_ioctl(s, cmd, arg);
|
|
}
|
|
|
|
|
|
static int cs4281_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_release(): inode=%p file=%p f_mode=%d\n",
|
|
inode, file, file->f_mode));
|
|
|
|
VALIDATE_STATE(s);
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
drain_dac(s, file->f_flags & O_NONBLOCK);
|
|
down(&s->open_sem_dac);
|
|
stop_dac(s);
|
|
dealloc_dmabuf(s, &s->dma_dac);
|
|
s->open_mode &= ~FMODE_WRITE;
|
|
up(&s->open_sem_dac);
|
|
wake_up(&s->open_wait_dac);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
drain_adc(s, file->f_flags & O_NONBLOCK);
|
|
down(&s->open_sem_adc);
|
|
stop_adc(s);
|
|
dealloc_dmabuf(s, &s->dma_adc);
|
|
s->open_mode &= ~FMODE_READ;
|
|
up(&s->open_sem_adc);
|
|
wake_up(&s->open_wait_adc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cs4281_open(struct inode *inode, struct file *file)
|
|
{
|
|
unsigned int minor = iminor(inode);
|
|
struct cs4281_state *s=NULL;
|
|
struct list_head *entry;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_open(): inode=%p file=%p f_mode=0x%x\n",
|
|
inode, file, file->f_mode));
|
|
|
|
list_for_each(entry, &cs4281_devs)
|
|
{
|
|
s = list_entry(entry, struct cs4281_state, list);
|
|
|
|
if (!((s->dev_audio ^ minor) & ~0xf))
|
|
break;
|
|
}
|
|
if (entry == &cs4281_devs)
|
|
return -ENODEV;
|
|
if (!s) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_open(): Error - unable to find audio state struct\n"));
|
|
return -ENODEV;
|
|
}
|
|
VALIDATE_STATE(s);
|
|
file->private_data = s;
|
|
|
|
// wait for device to become free
|
|
if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_open(): Error - must open READ and/or WRITE\n"));
|
|
return -ENODEV;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
down(&s->open_sem_dac);
|
|
while (s->open_mode & FMODE_WRITE) {
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
up(&s->open_sem_dac);
|
|
return -EBUSY;
|
|
}
|
|
up(&s->open_sem_dac);
|
|
interruptible_sleep_on(&s->open_wait_dac);
|
|
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
down(&s->open_sem_dac);
|
|
}
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
down(&s->open_sem_adc);
|
|
while (s->open_mode & FMODE_READ) {
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
up(&s->open_sem_adc);
|
|
return -EBUSY;
|
|
}
|
|
up(&s->open_sem_adc);
|
|
interruptible_sleep_on(&s->open_wait_adc);
|
|
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
down(&s->open_sem_adc);
|
|
}
|
|
}
|
|
s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
|
|
if (file->f_mode & FMODE_READ) {
|
|
s->prop_adc.fmt = AFMT_U8;
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
s->prop_adc.channels = 1;
|
|
s->prop_adc.rate = 8000;
|
|
s->prop_adc.clkdiv = 96 | 0x80;
|
|
s->conversion = 0;
|
|
s->ena &= ~FMODE_READ;
|
|
s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
|
|
s->dma_adc.subdivision = 0;
|
|
up(&s->open_sem_adc);
|
|
|
|
if (prog_dmabuf_adc(s)) {
|
|
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
|
|
"cs4281: adc Program dmabufs failed.\n"));
|
|
cs4281_release(inode, file);
|
|
return -ENOMEM;
|
|
}
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
s->prop_dac.fmt = AFMT_U8;
|
|
s->prop_dac.fmt_original = s->prop_dac.fmt;
|
|
s->prop_dac.channels = 1;
|
|
s->prop_dac.rate = 8000;
|
|
s->prop_dac.clkdiv = 96 | 0x80;
|
|
s->conversion = 0;
|
|
s->ena &= ~FMODE_WRITE;
|
|
s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
|
|
s->dma_dac.subdivision = 0;
|
|
up(&s->open_sem_dac);
|
|
|
|
if (prog_dmabuf_dac(s)) {
|
|
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
|
|
"cs4281: dac Program dmabufs failed.\n"));
|
|
cs4281_release(inode, file);
|
|
return -ENOMEM;
|
|
}
|
|
prog_codec(s, CS_TYPE_DAC);
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_open()- 0\n"));
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
|
|
// ******************************************************************************************
|
|
// Wave (audio) file operations struct.
|
|
// ******************************************************************************************
|
|
static /*const */ struct file_operations cs4281_audio_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = cs4281_read,
|
|
.write = cs4281_write,
|
|
.poll = cs4281_poll,
|
|
.ioctl = cs4281_ioctl,
|
|
.mmap = cs4281_mmap,
|
|
.open = cs4281_open,
|
|
.release = cs4281_release,
|
|
};
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
// hold spinlock for the following!
|
|
static void cs4281_handle_midi(struct cs4281_state *s)
|
|
{
|
|
unsigned char ch;
|
|
int wake;
|
|
unsigned temp1;
|
|
|
|
wake = 0;
|
|
while (!(readl(s->pBA0 + BA0_MIDSR) & 0x80)) {
|
|
ch = readl(s->pBA0 + BA0_MIDRP);
|
|
if (s->midi.icnt < MIDIINBUF) {
|
|
s->midi.ibuf[s->midi.iwr] = ch;
|
|
s->midi.iwr = (s->midi.iwr + 1) % MIDIINBUF;
|
|
s->midi.icnt++;
|
|
}
|
|
wake = 1;
|
|
}
|
|
if (wake)
|
|
wake_up(&s->midi.iwait);
|
|
wake = 0;
|
|
while (!(readl(s->pBA0 + BA0_MIDSR) & 0x40) && s->midi.ocnt > 0) {
|
|
temp1 = (s->midi.obuf[s->midi.ord]) & 0x000000ff;
|
|
writel(temp1, s->pBA0 + BA0_MIDWP);
|
|
s->midi.ord = (s->midi.ord + 1) % MIDIOUTBUF;
|
|
s->midi.ocnt--;
|
|
if (s->midi.ocnt < MIDIOUTBUF - 16)
|
|
wake = 1;
|
|
}
|
|
if (wake)
|
|
wake_up(&s->midi.owait);
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct cs4281_state *s = (struct cs4281_state *) dev_id;
|
|
unsigned int temp1;
|
|
|
|
// fastpath out, to ease interrupt sharing
|
|
temp1 = readl(s->pBA0 + BA0_HISR); // Get Int Status reg.
|
|
|
|
CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
|
|
"cs4281: cs4281_interrupt() BA0_HISR=0x%.8x\n", temp1));
|
|
/*
|
|
* If not DMA or MIDI interrupt, then just return.
|
|
*/
|
|
if (!(temp1 & (HISR_DMA0 | HISR_DMA1 | HISR_MIDI))) {
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR);
|
|
CS_DBGOUT(CS_INTERRUPT, 9, printk(KERN_INFO
|
|
"cs4281: cs4281_interrupt(): returning not cs4281 interrupt.\n"));
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (temp1 & HISR_DMA0) // If play interrupt,
|
|
readl(s->pBA0 + BA0_HDSR0); // clear the source.
|
|
|
|
if (temp1 & HISR_DMA1) // Same for play.
|
|
readl(s->pBA0 + BA0_HDSR1);
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Local EOI
|
|
|
|
spin_lock(&s->lock);
|
|
cs4281_update_ptr(s,CS_TRUE);
|
|
cs4281_handle_midi(s);
|
|
spin_unlock(&s->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
// **************************************************************************
|
|
|
|
static void cs4281_midi_timer(unsigned long data)
|
|
{
|
|
struct cs4281_state *s = (struct cs4281_state *) data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_handle_midi(s);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
s->midi.timer.expires = jiffies + 1;
|
|
add_timer(&s->midi.timer);
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static ssize_t cs4281_midi_read(struct file *file, char __user *buffer,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned ptr;
|
|
int cnt;
|
|
|
|
VALIDATE_STATE(s);
|
|
if (!access_ok(VERIFY_WRITE, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
while (count > 0) {
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
ptr = s->midi.ird;
|
|
cnt = MIDIINBUF - ptr;
|
|
if (s->midi.icnt < cnt)
|
|
cnt = s->midi.icnt;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&s->midi.iwait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
if (copy_to_user(buffer, s->midi.ibuf + ptr, cnt))
|
|
return ret ? ret : -EFAULT;
|
|
ptr = (ptr + cnt) % MIDIINBUF;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->midi.ird = ptr;
|
|
s->midi.icnt -= cnt;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static ssize_t cs4281_midi_write(struct file *file, const char __user *buffer,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned ptr;
|
|
int cnt;
|
|
|
|
VALIDATE_STATE(s);
|
|
if (!access_ok(VERIFY_READ, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
while (count > 0) {
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
ptr = s->midi.owr;
|
|
cnt = MIDIOUTBUF - ptr;
|
|
if (s->midi.ocnt + cnt > MIDIOUTBUF)
|
|
cnt = MIDIOUTBUF - s->midi.ocnt;
|
|
if (cnt <= 0)
|
|
cs4281_handle_midi(s);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&s->midi.owait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
if (copy_from_user(s->midi.obuf + ptr, buffer, cnt))
|
|
return ret ? ret : -EFAULT;
|
|
ptr = (ptr + cnt) % MIDIOUTBUF;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->midi.owr = ptr;
|
|
s->midi.ocnt += cnt;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4281_handle_midi(s);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static unsigned int cs4281_midi_poll(struct file *file,
|
|
struct poll_table_struct *wait)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
unsigned long flags;
|
|
unsigned int mask = 0;
|
|
|
|
VALIDATE_STATE(s);
|
|
if (file->f_flags & FMODE_WRITE)
|
|
poll_wait(file, &s->midi.owait, wait);
|
|
if (file->f_flags & FMODE_READ)
|
|
poll_wait(file, &s->midi.iwait, wait);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (file->f_flags & FMODE_READ) {
|
|
if (s->midi.icnt > 0)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
}
|
|
if (file->f_flags & FMODE_WRITE) {
|
|
if (s->midi.ocnt < MIDIOUTBUF)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return mask;
|
|
}
|
|
|
|
|
|
static int cs4281_midi_open(struct inode *inode, struct file *file)
|
|
{
|
|
unsigned long flags, temp1;
|
|
unsigned int minor = iminor(inode);
|
|
struct cs4281_state *s=NULL;
|
|
struct list_head *entry;
|
|
list_for_each(entry, &cs4281_devs)
|
|
{
|
|
s = list_entry(entry, struct cs4281_state, list);
|
|
|
|
if (s->dev_midi == minor)
|
|
break;
|
|
}
|
|
|
|
if (entry == &cs4281_devs)
|
|
return -ENODEV;
|
|
if (!s)
|
|
{
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_open(): Error - unable to find audio state struct\n"));
|
|
return -ENODEV;
|
|
}
|
|
VALIDATE_STATE(s);
|
|
file->private_data = s;
|
|
// wait for device to become free
|
|
down(&s->open_sem);
|
|
while (s->open_mode & (file->f_mode << FMODE_MIDI_SHIFT)) {
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
up(&s->open_sem);
|
|
return -EBUSY;
|
|
}
|
|
up(&s->open_sem);
|
|
interruptible_sleep_on(&s->open_wait);
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
down(&s->open_sem);
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) {
|
|
s->midi.ird = s->midi.iwr = s->midi.icnt = 0;
|
|
s->midi.ord = s->midi.owr = s->midi.ocnt = 0;
|
|
writel(1, s->pBA0 + BA0_MIDCR); // Reset the interface.
|
|
writel(0, s->pBA0 + BA0_MIDCR); // Return to normal mode.
|
|
s->midi.ird = s->midi.iwr = s->midi.icnt = 0;
|
|
writel(0x0000000f, s->pBA0 + BA0_MIDCR); // Enable transmit, record, ints.
|
|
temp1 = readl(s->pBA0 + BA0_HIMR);
|
|
writel(temp1 & 0xffbfffff, s->pBA0 + BA0_HIMR); // Enable midi int. recognition.
|
|
writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts
|
|
init_timer(&s->midi.timer);
|
|
s->midi.timer.expires = jiffies + 1;
|
|
s->midi.timer.data = (unsigned long) s;
|
|
s->midi.timer.function = cs4281_midi_timer;
|
|
add_timer(&s->midi.timer);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
s->midi.ird = s->midi.iwr = s->midi.icnt = 0;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
s->midi.ord = s->midi.owr = s->midi.ocnt = 0;
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
s->open_mode |=
|
|
(file->
|
|
f_mode << FMODE_MIDI_SHIFT) & (FMODE_MIDI_READ |
|
|
FMODE_MIDI_WRITE);
|
|
up(&s->open_sem);
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
|
|
static int cs4281_midi_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct cs4281_state *s =
|
|
(struct cs4281_state *) file->private_data;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
unsigned count, tmo;
|
|
|
|
VALIDATE_STATE(s);
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
add_wait_queue(&s->midi.owait, &wait);
|
|
for (;;) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
count = s->midi.ocnt;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (count <= 0)
|
|
break;
|
|
if (signal_pending(current))
|
|
break;
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
remove_wait_queue(&s->midi.owait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
return -EBUSY;
|
|
}
|
|
tmo = (count * HZ) / 3100;
|
|
if (!schedule_timeout(tmo ? : 1) && tmo)
|
|
printk(KERN_DEBUG
|
|
"cs4281: midi timed out??\n");
|
|
}
|
|
remove_wait_queue(&s->midi.owait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
}
|
|
down(&s->open_sem);
|
|
s->open_mode &=
|
|
(~(file->f_mode << FMODE_MIDI_SHIFT)) & (FMODE_MIDI_READ |
|
|
FMODE_MIDI_WRITE);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) {
|
|
writel(0, s->pBA0 + BA0_MIDCR); // Disable Midi interrupts.
|
|
del_timer(&s->midi.timer);
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
up(&s->open_sem);
|
|
wake_up(&s->open_wait);
|
|
return 0;
|
|
}
|
|
|
|
// ******************************************************************************************
|
|
// Midi file operations struct.
|
|
// ******************************************************************************************
|
|
static /*const */ struct file_operations cs4281_midi_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = cs4281_midi_read,
|
|
.write = cs4281_midi_write,
|
|
.poll = cs4281_midi_poll,
|
|
.open = cs4281_midi_open,
|
|
.release = cs4281_midi_release,
|
|
};
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
// maximum number of devices
|
|
#define NR_DEVICE 8 // Only eight devices supported currently.
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static struct initvol {
|
|
int mixch;
|
|
int vol;
|
|
} initvol[] __devinitdata = {
|
|
|
|
{
|
|
SOUND_MIXER_WRITE_VOLUME, 0x4040}, {
|
|
SOUND_MIXER_WRITE_PCM, 0x4040}, {
|
|
SOUND_MIXER_WRITE_SYNTH, 0x4040}, {
|
|
SOUND_MIXER_WRITE_CD, 0x4040}, {
|
|
SOUND_MIXER_WRITE_LINE, 0x4040}, {
|
|
SOUND_MIXER_WRITE_LINE1, 0x4040}, {
|
|
SOUND_MIXER_WRITE_RECLEV, 0x0000}, {
|
|
SOUND_MIXER_WRITE_SPEAKER, 0x4040}, {
|
|
SOUND_MIXER_WRITE_MIC, 0x0000}
|
|
};
|
|
|
|
|
|
#ifndef NOT_CS4281_PM
|
|
static void __devinit cs4281_BuildFIFO(
|
|
struct cs4281_pipeline *p,
|
|
struct cs4281_state *s)
|
|
{
|
|
switch(p->number)
|
|
{
|
|
case 0: /* playback */
|
|
{
|
|
p->u32FCRnAddress = BA0_FCR0;
|
|
p->u32FSICnAddress = BA0_FSIC0;
|
|
p->u32FPDRnAddress = BA0_FPDR0;
|
|
break;
|
|
}
|
|
case 1: /* capture */
|
|
{
|
|
p->u32FCRnAddress = BA0_FCR1;
|
|
p->u32FSICnAddress = BA0_FSIC1;
|
|
p->u32FPDRnAddress = BA0_FPDR1;
|
|
break;
|
|
}
|
|
|
|
case 2:
|
|
{
|
|
p->u32FCRnAddress = BA0_FCR2;
|
|
p->u32FSICnAddress = BA0_FSIC2;
|
|
p->u32FPDRnAddress = BA0_FPDR2;
|
|
break;
|
|
}
|
|
case 3:
|
|
{
|
|
p->u32FCRnAddress = BA0_FCR3;
|
|
p->u32FSICnAddress = BA0_FSIC3;
|
|
p->u32FPDRnAddress = BA0_FPDR3;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
//
|
|
// first read the hardware to initialize the member variables
|
|
//
|
|
p->u32FCRnValue = readl(s->pBA0 + p->u32FCRnAddress);
|
|
p->u32FSICnValue = readl(s->pBA0 + p->u32FSICnAddress);
|
|
p->u32FPDRnValue = readl(s->pBA0 + p->u32FPDRnAddress);
|
|
|
|
}
|
|
|
|
static void __devinit cs4281_BuildDMAengine(
|
|
struct cs4281_pipeline *p,
|
|
struct cs4281_state *s)
|
|
{
|
|
/*
|
|
* initialize all the addresses of this pipeline dma info.
|
|
*/
|
|
switch(p->number)
|
|
{
|
|
case 0: /* playback */
|
|
{
|
|
p->u32DBAnAddress = BA0_DBA0;
|
|
p->u32DCAnAddress = BA0_DCA0;
|
|
p->u32DBCnAddress = BA0_DBC0;
|
|
p->u32DCCnAddress = BA0_DCC0;
|
|
p->u32DMRnAddress = BA0_DMR0;
|
|
p->u32DCRnAddress = BA0_DCR0;
|
|
p->u32HDSRnAddress = BA0_HDSR0;
|
|
break;
|
|
}
|
|
|
|
case 1: /* capture */
|
|
{
|
|
p->u32DBAnAddress = BA0_DBA1;
|
|
p->u32DCAnAddress = BA0_DCA1;
|
|
p->u32DBCnAddress = BA0_DBC1;
|
|
p->u32DCCnAddress = BA0_DCC1;
|
|
p->u32DMRnAddress = BA0_DMR1;
|
|
p->u32DCRnAddress = BA0_DCR1;
|
|
p->u32HDSRnAddress = BA0_HDSR1;
|
|
break;
|
|
}
|
|
|
|
case 2:
|
|
{
|
|
p->u32DBAnAddress = BA0_DBA2;
|
|
p->u32DCAnAddress = BA0_DCA2;
|
|
p->u32DBCnAddress = BA0_DBC2;
|
|
p->u32DCCnAddress = BA0_DCC2;
|
|
p->u32DMRnAddress = BA0_DMR2;
|
|
p->u32DCRnAddress = BA0_DCR2;
|
|
p->u32HDSRnAddress = BA0_HDSR2;
|
|
break;
|
|
}
|
|
|
|
case 3:
|
|
{
|
|
p->u32DBAnAddress = BA0_DBA3;
|
|
p->u32DCAnAddress = BA0_DCA3;
|
|
p->u32DBCnAddress = BA0_DBC3;
|
|
p->u32DCCnAddress = BA0_DCC3;
|
|
p->u32DMRnAddress = BA0_DMR3;
|
|
p->u32DCRnAddress = BA0_DCR3;
|
|
p->u32HDSRnAddress = BA0_HDSR3;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Initialize the dma values for this pipeline
|
|
//
|
|
p->u32DBAnValue = readl(s->pBA0 + p->u32DBAnAddress);
|
|
p->u32DBCnValue = readl(s->pBA0 + p->u32DBCnAddress);
|
|
p->u32DMRnValue = readl(s->pBA0 + p->u32DMRnAddress);
|
|
p->u32DCRnValue = readl(s->pBA0 + p->u32DCRnAddress);
|
|
|
|
}
|
|
|
|
static void __devinit cs4281_InitPM(struct cs4281_state *s)
|
|
{
|
|
int i;
|
|
struct cs4281_pipeline *p;
|
|
|
|
for(i=0;i<CS4281_NUMBER_OF_PIPELINES;i++)
|
|
{
|
|
p = &s->pl[i];
|
|
p->number = i;
|
|
cs4281_BuildDMAengine(p,s);
|
|
cs4281_BuildFIFO(p,s);
|
|
/*
|
|
* currently only 2 pipelines are used
|
|
* so, only set the valid bit on the playback and capture.
|
|
*/
|
|
if( (i == CS4281_PLAYBACK_PIPELINE_NUMBER) ||
|
|
(i == CS4281_CAPTURE_PIPELINE_NUMBER))
|
|
p->flags |= CS4281_PIPELINE_VALID;
|
|
}
|
|
s->pm.u32SSPM_BITS = 0x7e; /* rev c, use 0x7c for rev a or b */
|
|
}
|
|
#endif
|
|
|
|
static int __devinit cs4281_probe(struct pci_dev *pcidev,
|
|
const struct pci_device_id *pciid)
|
|
{
|
|
struct cs4281_state *s;
|
|
dma_addr_t dma_mask;
|
|
mm_segment_t fs;
|
|
int i, val;
|
|
unsigned int temp1, temp2;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_INIT, 2,
|
|
printk(KERN_INFO "cs4281: probe()+\n"));
|
|
|
|
if (pci_enable_device(pcidev)) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: pci_enable_device() failed\n"));
|
|
return -1;
|
|
}
|
|
if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM) ||
|
|
!(pci_resource_flags(pcidev, 1) & IORESOURCE_MEM)) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe()- Memory region not assigned\n"));
|
|
return -ENODEV;
|
|
}
|
|
if (pcidev->irq == 0) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() IRQ not assigned\n"));
|
|
return -ENODEV;
|
|
}
|
|
dma_mask = 0xffffffff; /* this enables playback and recording */
|
|
i = pci_set_dma_mask(pcidev, dma_mask);
|
|
if (i) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() architecture does not support 32bit PCI busmaster DMA\n"));
|
|
return i;
|
|
}
|
|
if (!(s = kmalloc(sizeof(struct cs4281_state), GFP_KERNEL))) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() no memory for state struct.\n"));
|
|
return -1;
|
|
}
|
|
memset(s, 0, sizeof(struct cs4281_state));
|
|
init_waitqueue_head(&s->dma_adc.wait);
|
|
init_waitqueue_head(&s->dma_dac.wait);
|
|
init_waitqueue_head(&s->open_wait);
|
|
init_waitqueue_head(&s->open_wait_adc);
|
|
init_waitqueue_head(&s->open_wait_dac);
|
|
init_waitqueue_head(&s->midi.iwait);
|
|
init_waitqueue_head(&s->midi.owait);
|
|
init_MUTEX(&s->open_sem);
|
|
init_MUTEX(&s->open_sem_adc);
|
|
init_MUTEX(&s->open_sem_dac);
|
|
spin_lock_init(&s->lock);
|
|
s->pBA0phys = pci_resource_start(pcidev, 0);
|
|
s->pBA1phys = pci_resource_start(pcidev, 1);
|
|
|
|
/* Convert phys to linear. */
|
|
s->pBA0 = ioremap_nocache(s->pBA0phys, 4096);
|
|
if (!s->pBA0) {
|
|
CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR
|
|
"cs4281: BA0 I/O mapping failed. Skipping part.\n"));
|
|
goto err_free;
|
|
}
|
|
s->pBA1 = ioremap_nocache(s->pBA1phys, 65536);
|
|
if (!s->pBA1) {
|
|
CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR
|
|
"cs4281: BA1 I/O mapping failed. Skipping part.\n"));
|
|
goto err_unmap;
|
|
}
|
|
|
|
temp1 = readl(s->pBA0 + BA0_PCICFG00);
|
|
temp2 = readl(s->pBA0 + BA0_PCICFG04);
|
|
|
|
CS_DBGOUT(CS_INIT, 2,
|
|
printk(KERN_INFO
|
|
"cs4281: probe() BA0=0x%.8x BA1=0x%.8x pBA0=%p pBA1=%p \n",
|
|
(unsigned) temp1, (unsigned) temp2, s->pBA0, s->pBA1));
|
|
CS_DBGOUT(CS_INIT, 2,
|
|
printk(KERN_INFO
|
|
"cs4281: probe() pBA0phys=0x%.8x pBA1phys=0x%.8x\n",
|
|
(unsigned) s->pBA0phys, (unsigned) s->pBA1phys));
|
|
|
|
#ifndef NOT_CS4281_PM
|
|
s->pm.flags = CS4281_PM_IDLE;
|
|
#endif
|
|
temp1 = cs4281_hw_init(s);
|
|
if (temp1) {
|
|
CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR
|
|
"cs4281: cs4281_hw_init() failed. Skipping part.\n"));
|
|
goto err_irq;
|
|
}
|
|
s->magic = CS4281_MAGIC;
|
|
s->pcidev = pcidev;
|
|
s->irq = pcidev->irq;
|
|
if (request_irq
|
|
(s->irq, cs4281_interrupt, SA_SHIRQ, "Crystal CS4281", s)) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1,
|
|
printk(KERN_ERR "cs4281: irq %u in use\n", s->irq));
|
|
goto err_irq;
|
|
}
|
|
if ((s->dev_audio = register_sound_dsp(&cs4281_audio_fops, -1)) <
|
|
0) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() register_sound_dsp() failed.\n"));
|
|
goto err_dev1;
|
|
}
|
|
if ((s->dev_mixer = register_sound_mixer(&cs4281_mixer_fops, -1)) <
|
|
0) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() register_sound_mixer() failed.\n"));
|
|
goto err_dev2;
|
|
}
|
|
if ((s->dev_midi = register_sound_midi(&cs4281_midi_fops, -1)) < 0) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4281: probe() register_sound_midi() failed.\n"));
|
|
goto err_dev3;
|
|
}
|
|
#ifndef NOT_CS4281_PM
|
|
cs4281_InitPM(s);
|
|
s->pm.flags |= CS4281_PM_NOT_REGISTERED;
|
|
#endif
|
|
|
|
pci_set_master(pcidev); // enable bus mastering
|
|
|
|
fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
val = SOUND_MASK_LINE;
|
|
mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val);
|
|
for (i = 0; i < sizeof(initvol) / sizeof(initvol[0]); i++) {
|
|
val = initvol[i].vol;
|
|
mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val);
|
|
}
|
|
val = 1; // enable mic preamp
|
|
mixer_ioctl(s, SOUND_MIXER_PRIVATE1, (unsigned long) &val);
|
|
set_fs(fs);
|
|
|
|
pci_set_drvdata(pcidev, s);
|
|
list_add(&s->list, &cs4281_devs);
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4281: probe()- device allocated successfully\n"));
|
|
return 0;
|
|
|
|
err_dev3:
|
|
unregister_sound_mixer(s->dev_mixer);
|
|
err_dev2:
|
|
unregister_sound_dsp(s->dev_audio);
|
|
err_dev1:
|
|
free_irq(s->irq, s);
|
|
err_irq:
|
|
iounmap(s->pBA1);
|
|
err_unmap:
|
|
iounmap(s->pBA0);
|
|
err_free:
|
|
kfree(s);
|
|
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4281: probe()- no device allocated\n"));
|
|
return -ENODEV;
|
|
} // probe_cs4281
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static void __devexit cs4281_remove(struct pci_dev *pci_dev)
|
|
{
|
|
struct cs4281_state *s = pci_get_drvdata(pci_dev);
|
|
// stop DMA controller
|
|
synchronize_irq(s->irq);
|
|
free_irq(s->irq, s);
|
|
unregister_sound_dsp(s->dev_audio);
|
|
unregister_sound_mixer(s->dev_mixer);
|
|
unregister_sound_midi(s->dev_midi);
|
|
iounmap(s->pBA1);
|
|
iounmap(s->pBA0);
|
|
pci_set_drvdata(pci_dev,NULL);
|
|
list_del(&s->list);
|
|
kfree(s);
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_remove()-: remove successful\n"));
|
|
}
|
|
|
|
static struct pci_device_id cs4281_pci_tbl[] = {
|
|
{
|
|
.vendor = PCI_VENDOR_ID_CIRRUS,
|
|
.device = PCI_DEVICE_ID_CRYSTAL_CS4281,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, cs4281_pci_tbl);
|
|
|
|
static struct pci_driver cs4281_pci_driver = {
|
|
.name = "cs4281",
|
|
.id_table = cs4281_pci_tbl,
|
|
.probe = cs4281_probe,
|
|
.remove = __devexit_p(cs4281_remove),
|
|
.suspend = CS4281_SUSPEND_TBL,
|
|
.resume = CS4281_RESUME_TBL,
|
|
};
|
|
|
|
static int __init cs4281_init_module(void)
|
|
{
|
|
int rtn = 0;
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4281: cs4281_init_module()+ \n"));
|
|
printk(KERN_INFO "cs4281: version v%d.%02d.%d time " __TIME__ " "
|
|
__DATE__ "\n", CS4281_MAJOR_VERSION, CS4281_MINOR_VERSION,
|
|
CS4281_ARCH);
|
|
rtn = pci_register_driver(&cs4281_pci_driver);
|
|
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cs4281_init_module()- (%d)\n",rtn));
|
|
return rtn;
|
|
}
|
|
|
|
static void __exit cs4281_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&cs4281_pci_driver);
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4281: cleanup_cs4281() finished\n"));
|
|
}
|
|
// ---------------------------------------------------------------------
|
|
|
|
MODULE_AUTHOR("gw boynton, audio@crystal.cirrus.com");
|
|
MODULE_DESCRIPTION("Cirrus Logic CS4281 Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
module_init(cs4281_init_module);
|
|
module_exit(cs4281_cleanup_module);
|
|
|