forked from luck/tmp_suning_uos_patched
d9bdffd210
Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
91 lines
2.3 KiB
C
91 lines
2.3 KiB
C
/*
|
|
* Copyright 2002 Integrated Device Technology, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* GPIO register definition.
|
|
*
|
|
* Author : ryan.holmQVist@idt.com
|
|
* Date : 20011005
|
|
* Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
|
|
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
|
|
*/
|
|
|
|
#ifndef _RC32434_GPIO_H_
|
|
#define _RC32434_GPIO_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
#define NR_BUILTIN_GPIO 32
|
|
|
|
#define gpio_get_value __gpio_get_value
|
|
#define gpio_set_value __gpio_set_value
|
|
#define gpio_cansleep __gpio_cansleep
|
|
|
|
#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio)
|
|
#define irq_to_gpio(irq) (irq - (8 + 4 * 32))
|
|
|
|
struct rb532_gpio_reg {
|
|
u32 gpiofunc; /* GPIO Function Register
|
|
* gpiofunc[x]==0 bit = gpio
|
|
* func[x]==1 bit = altfunc
|
|
*/
|
|
u32 gpiocfg; /* GPIO Configuration Register
|
|
* gpiocfg[x]==0 bit = input
|
|
* gpiocfg[x]==1 bit = output
|
|
*/
|
|
u32 gpiod; /* GPIO Data Register
|
|
* gpiod[x] read/write gpio pinX status
|
|
*/
|
|
u32 gpioilevel; /* GPIO Interrupt Status Register
|
|
* interrupt level (see gpioistat)
|
|
*/
|
|
u32 gpioistat; /* Gpio Interrupt Status Register
|
|
* istat[x] = (gpiod[x] == level[x])
|
|
* cleared in ISR (STICKY bits)
|
|
*/
|
|
u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */
|
|
};
|
|
|
|
/* UART GPIO signals */
|
|
#define RC32434_UART0_SOUT (1 << 0)
|
|
#define RC32434_UART0_SIN (1 << 1)
|
|
#define RC32434_UART0_RTS (1 << 2)
|
|
#define RC32434_UART0_CTS (1 << 3)
|
|
|
|
/* M & P bus GPIO signals */
|
|
#define RC32434_MP_BIT_22 (1 << 4)
|
|
#define RC32434_MP_BIT_23 (1 << 5)
|
|
#define RC32434_MP_BIT_24 (1 << 6)
|
|
#define RC32434_MP_BIT_25 (1 << 7)
|
|
|
|
/* CPU GPIO signals */
|
|
#define RC32434_CPU_GPIO (1 << 8)
|
|
|
|
/* Reserved GPIO signals */
|
|
#define RC32434_AF_SPARE_6 (1 << 9)
|
|
#define RC32434_AF_SPARE_4 (1 << 10)
|
|
#define RC32434_AF_SPARE_3 (1 << 11)
|
|
#define RC32434_AF_SPARE_2 (1 << 12)
|
|
|
|
/* PCI messaging unit */
|
|
#define RC32434_PCI_MSU_GPIO (1 << 13)
|
|
|
|
/* NAND GPIO signals */
|
|
#define GPIO_RDY 8
|
|
#define GPIO_WPX 9
|
|
#define GPIO_ALE 10
|
|
#define GPIO_CLE 11
|
|
|
|
/* Compact Flash GPIO pin */
|
|
#define CF_GPIO_NUM 13
|
|
|
|
/* S1 button GPIO (shared with UART0_SIN) */
|
|
#define GPIO_BTN_S1 1
|
|
|
|
extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
|
|
extern void rb532_gpio_set_istat(int bit, unsigned gpio);
|
|
extern void rb532_gpio_set_func(unsigned gpio);
|
|
|
|
#endif /* _RC32434_GPIO_H_ */
|