forked from luck/tmp_suning_uos_patched
bd59b343a9
Per the spec, the BCM2835's IRQs are all disabled when coming out of
power-on reset. Its IRQ driver assumes that's still the case when the
kernel boots and does not perform any initialization of the registers.
However the Raspberry Pi Foundation's bootloader leaves the USB
interrupt enabled when handing over control to the kernel.
Quiesce IRQs and the FIQ if they were left enabled and log a message to
let users know that they should update the bootloader once a fixed
version is released.
If the USB interrupt is not quiesced and the USB driver later on claims
the FIQ (as it does on the Raspberry Pi Foundation's downstream kernel),
interrupt latency for all other peripherals increases and occasional
lockups occur. That's because both the FIQ and the normal USB interrupt
fire simultaneously:
On a multicore Raspberry Pi, if normal interrupts are routed to CPU 0
and the FIQ to CPU 1 (hardcoded in the Foundation's kernel), then a USB
interrupt causes CPU 0 to spin in bcm2836_chained_handle_irq() until the
FIQ on CPU 1 has cleared it. Other peripherals' interrupts are starved
as long. I've seen CPU 0 blocked for up to 2.9 msec. eMMC throughput
on a Compute Module 3 irregularly dips to 23.0 MB/s without this commit
but remains relatively constant at 23.5 MB/s with this commit.
The lockups occur when CPU 0 receives a USB interrupt while holding a
lock which CPU 1 is trying to acquire while the FIQ is temporarily
disabled on CPU 1. At best users get RCU CPU stall warnings, but most
of the time the system just freezes.
Fixes: 89214f009c
("ARM: bcm2835: add interrupt controller driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/f97868ba4e9b86ddad71f44ec9d8b3b7d8daa1ea.1582618537.git.lukas@wunner.de
264 lines
7.3 KiB
C
264 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2010 Broadcom
|
|
* Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
|
|
*
|
|
* Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
|
|
*
|
|
* If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
|
|
* on bank 0 is set to signify that an interrupt in bank 1 has fired, and
|
|
* to look in the bank 1 status register for more information.
|
|
*
|
|
* If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
|
|
* shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
|
|
* status register, but bank 0 bit 8 is _not_ set.
|
|
*
|
|
* Quirk 2: You can't mask the register 1/2 pending interrupts
|
|
*
|
|
* In a proper cascaded interrupt controller, the interrupt lines with
|
|
* cascaded interrupt controllers on them are just normal interrupt lines.
|
|
* You can mask the interrupts and get on with things. With this controller
|
|
* you can't do that.
|
|
*
|
|
* Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
|
|
*
|
|
* Those interrupts that have shortcuts can only be masked/unmasked in
|
|
* their respective banks' enable/disable registers. Doing so in the bank 0
|
|
* enable/disable registers has no effect.
|
|
*
|
|
* The FIQ control register:
|
|
* Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
|
|
* Bit 7: Enable FIQ generation
|
|
* Bits 8+: Unused
|
|
*
|
|
* An interrupt must be disabled before configuring it for FIQ generation
|
|
* otherwise both handlers will fire at the same time!
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqdomain.h>
|
|
|
|
#include <asm/exception.h>
|
|
|
|
/* Put the bank and irq (32 bits) into the hwirq */
|
|
#define MAKE_HWIRQ(b, n) ((b << 5) | (n))
|
|
#define HWIRQ_BANK(i) (i >> 5)
|
|
#define HWIRQ_BIT(i) BIT(i & 0x1f)
|
|
|
|
#define NR_IRQS_BANK0 8
|
|
#define BANK0_HWIRQ_MASK 0xff
|
|
/* Shortcuts can't be disabled so any unknown new ones need to be masked */
|
|
#define SHORTCUT1_MASK 0x00007c00
|
|
#define SHORTCUT2_MASK 0x001f8000
|
|
#define SHORTCUT_SHIFT 10
|
|
#define BANK1_HWIRQ BIT(8)
|
|
#define BANK2_HWIRQ BIT(9)
|
|
#define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
|
|
| SHORTCUT1_MASK | SHORTCUT2_MASK)
|
|
|
|
#define REG_FIQ_CONTROL 0x0c
|
|
#define FIQ_CONTROL_ENABLE BIT(7)
|
|
|
|
#define NR_BANKS 3
|
|
#define IRQS_PER_BANK 32
|
|
|
|
static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
|
|
static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
|
|
static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
|
|
static const int bank_irqs[] __initconst = { 8, 32, 32 };
|
|
|
|
static const int shortcuts[] = {
|
|
7, 9, 10, 18, 19, /* Bank 1 */
|
|
21, 22, 23, 24, 25, 30 /* Bank 2 */
|
|
};
|
|
|
|
struct armctrl_ic {
|
|
void __iomem *base;
|
|
void __iomem *pending[NR_BANKS];
|
|
void __iomem *enable[NR_BANKS];
|
|
void __iomem *disable[NR_BANKS];
|
|
struct irq_domain *domain;
|
|
};
|
|
|
|
static struct armctrl_ic intc __read_mostly;
|
|
static void __exception_irq_entry bcm2835_handle_irq(
|
|
struct pt_regs *regs);
|
|
static void bcm2836_chained_handle_irq(struct irq_desc *desc);
|
|
|
|
static void armctrl_mask_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
|
|
}
|
|
|
|
static void armctrl_unmask_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
|
|
}
|
|
|
|
static struct irq_chip armctrl_chip = {
|
|
.name = "ARMCTRL-level",
|
|
.irq_mask = armctrl_mask_irq,
|
|
.irq_unmask = armctrl_unmask_irq
|
|
};
|
|
|
|
static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(intsize != 2))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[0] >= NR_BANKS))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
|
|
return -EINVAL;
|
|
|
|
*out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
|
|
*out_type = IRQ_TYPE_NONE;
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops armctrl_ops = {
|
|
.xlate = armctrl_xlate
|
|
};
|
|
|
|
static int __init armctrl_of_init(struct device_node *node,
|
|
struct device_node *parent,
|
|
bool is_2836)
|
|
{
|
|
void __iomem *base;
|
|
int irq, b, i;
|
|
u32 reg;
|
|
|
|
base = of_iomap(node, 0);
|
|
if (!base)
|
|
panic("%pOF: unable to map IC registers\n", node);
|
|
|
|
intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
|
|
&armctrl_ops, NULL);
|
|
if (!intc.domain)
|
|
panic("%pOF: unable to create IRQ domain\n", node);
|
|
|
|
for (b = 0; b < NR_BANKS; b++) {
|
|
intc.pending[b] = base + reg_pending[b];
|
|
intc.enable[b] = base + reg_enable[b];
|
|
intc.disable[b] = base + reg_disable[b];
|
|
|
|
for (i = 0; i < bank_irqs[b]; i++) {
|
|
irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
|
|
BUG_ON(irq <= 0);
|
|
irq_set_chip_and_handler(irq, &armctrl_chip,
|
|
handle_level_irq);
|
|
irq_set_probe(irq);
|
|
}
|
|
|
|
reg = readl_relaxed(intc.enable[b]);
|
|
if (reg) {
|
|
writel_relaxed(reg, intc.disable[b]);
|
|
pr_err(FW_BUG "Bootloader left irq enabled: "
|
|
"bank %d irq %*pbl\n", b, IRQS_PER_BANK, ®);
|
|
}
|
|
}
|
|
|
|
reg = readl_relaxed(base + REG_FIQ_CONTROL);
|
|
if (reg & FIQ_CONTROL_ENABLE) {
|
|
writel_relaxed(0, base + REG_FIQ_CONTROL);
|
|
pr_err(FW_BUG "Bootloader left fiq enabled\n");
|
|
}
|
|
|
|
if (is_2836) {
|
|
int parent_irq = irq_of_parse_and_map(node, 0);
|
|
|
|
if (!parent_irq) {
|
|
panic("%pOF: unable to get parent interrupt.\n",
|
|
node);
|
|
}
|
|
irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
|
|
} else {
|
|
set_handle_irq(bcm2835_handle_irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init bcm2835_armctrl_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
return armctrl_of_init(node, parent, false);
|
|
}
|
|
|
|
static int __init bcm2836_armctrl_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
return armctrl_of_init(node, parent, true);
|
|
}
|
|
|
|
|
|
/*
|
|
* Handle each interrupt across the entire interrupt controller. This reads the
|
|
* status register before handling each interrupt, which is necessary given that
|
|
* handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
|
|
*/
|
|
|
|
static u32 armctrl_translate_bank(int bank)
|
|
{
|
|
u32 stat = readl_relaxed(intc.pending[bank]);
|
|
|
|
return MAKE_HWIRQ(bank, ffs(stat) - 1);
|
|
}
|
|
|
|
static u32 armctrl_translate_shortcut(int bank, u32 stat)
|
|
{
|
|
return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
|
|
}
|
|
|
|
static u32 get_next_armctrl_hwirq(void)
|
|
{
|
|
u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
|
|
|
|
if (stat == 0)
|
|
return ~0;
|
|
else if (stat & BANK0_HWIRQ_MASK)
|
|
return MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
|
|
else if (stat & SHORTCUT1_MASK)
|
|
return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
|
|
else if (stat & SHORTCUT2_MASK)
|
|
return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
|
|
else if (stat & BANK1_HWIRQ)
|
|
return armctrl_translate_bank(1);
|
|
else if (stat & BANK2_HWIRQ)
|
|
return armctrl_translate_bank(2);
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void __exception_irq_entry bcm2835_handle_irq(
|
|
struct pt_regs *regs)
|
|
{
|
|
u32 hwirq;
|
|
|
|
while ((hwirq = get_next_armctrl_hwirq()) != ~0)
|
|
handle_domain_irq(intc.domain, hwirq, regs);
|
|
}
|
|
|
|
static void bcm2836_chained_handle_irq(struct irq_desc *desc)
|
|
{
|
|
u32 hwirq;
|
|
|
|
while ((hwirq = get_next_armctrl_hwirq()) != ~0)
|
|
generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
|
|
}
|
|
|
|
IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
|
|
bcm2835_armctrl_of_init);
|
|
IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
|
|
bcm2836_armctrl_of_init);
|