AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
0b700a6a25
kernel_optimize_test/arch/arm
History
David Brownell 34f32c9701 usb: musb: make Davinci *work* in mainline 
Now that the musb build fixes for DaVinci got merged (RC3?), kick in
the other bits needed to get it finally *working* in mainline:

 - Use clk_enable()/clk_disable() ... the "always enable USB clocks"
   code this originally relied on has since been removed.

 - Initialize the USB device only after the relevant I2C GPIOs are
   available, so the host side can properly enable VBUS.

 - Tweak init sequencing to cope with mainline's relatively late init
   of the I2C system bus for power switches, transceivers, and so on.

Sanity tested on DM6664 EVM for host and peripheral modes; that system
won't boot with CONFIG_PM enabled, so OTG can't yet be tested.  Also
verified on OMAP3.

(Unrelated:  correct the MODULE_PARM_DESC spelling of musb_debug.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 14:40:51 -08:00
..
boot
common [ARM] clkdev: fix clock matching 2009-01-24 11:41:20 +00:00
configs [ARM] 5390/1: AT91: Watchdog fixes 2009-02-14 16:01:57 +00:00
include/asm byteorder: make swab.h include asm/swab.h like a regular header 2009-01-14 19:56:50 -08:00
kernel [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC 2009-02-19 14:45:27 +00:00
lib
mach-aaec2000 arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-at91 [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller 2009-02-16 21:40:39 +00:00
mach-clps711x [ARM] clps711x: fix warning in edb7211-mm.c 2009-01-08 16:29:42 +00:00
mach-davinci usb: musb: make Davinci *work* in mainline 2009-02-27 14:40:51 -08:00
mach-ebsa110
mach-ep93xx [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header 2009-02-19 16:13:02 +00:00
mach-footbridge Merge branch 'devel' 2009-01-08 22:01:49 +00:00
mach-h720x [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-imx [ARM] i.MX add missing include 2009-01-12 12:14:40 +01:00
mach-integrator libata-sff: fix incorrect EH message 2009-01-26 06:36:16 -05:00
mach-iop13xx
mach-iop32x
mach-iop33x
mach-ixp4xx
mach-ixp23xx
mach-ixp2000
mach-kirkwood [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-ks8695 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-l7200
mach-lh7a40x arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-loki
mach-msm [ARM] msm: fix build errors 2009-01-28 10:19:52 +00:00
mach-mv78xx0 [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-mx1
mach-mx2 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-mx3 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-netx [ARM] fix netx 2009-01-08 16:29:44 +00:00
mach-ns9xxx
mach-omap1 ARM: OMAP: Fix hsmmc init, v2 2009-01-29 08:57:16 -08:00
mach-omap2 [ARM] omap: fix clock reparenting in omap2_clk_set_parent() 2009-02-19 13:25:16 +00:00
mach-orion5x [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-pnx4008 [ARM] fix pnx4008 2009-01-08 16:29:43 +00:00
mach-pxa [ARM] pxa: stop and disable IRQ for each DMA channels at startup 2009-01-21 11:29:19 +08:00
mach-realview [ARM] Fix realview build 2009-01-08 16:29:41 +00:00
mach-rpc Add i2c_board_info for RiscPC PCF8583 2009-02-24 19:19:50 +01:00
mach-s3c24a0/include/mach
mach-s3c2400
mach-s3c2410 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-s3c2412
mach-s3c2440 [ARM] 5358/1: AT2440EVB: Use new include path of mci.h 2009-01-08 16:29:41 +00:00
mach-s3c2442
mach-s3c2443
mach-s3c6400 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-s3c6410
mach-sa1100 rename platform_driver name "flash" to "sa1100-mtd" 2009-01-31 01:21:58 +01:00
mach-shark
mach-versatile arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-w90x900 [ARM] w90x900: fix build errors and warnings 2009-01-12 13:51:03 +00:00
mm [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() 2009-02-19 09:49:45 +00:00
nwfpe
oprofile
plat-iop
plat-mxc mmc: Add a MX2/MX3 specific SDHC driver 2009-02-02 20:57:05 +01:00
plat-omap ARM: OMAP: Fix hsmmc init, v2 2009-01-29 08:57:16 -08:00
plat-orion [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
plat-s3c [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
plat-s3c24xx [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
plat-s3c64xx [ARM] S3C64XX: Fix EINT group macro definition 2009-01-08 16:25:24 +00:00
tools
vfp
Kconfig Staging: Kconfig for ARCH=arm,8300, cris 2009-01-06 13:51:38 -08:00
Kconfig-nommu
Kconfig.debug
Makefile