kernel_optimize_test/drivers/ata
Tejun Heo 0bcc65ad78 libata: make qc->nbytes include extra buffers
qc->nbytes didn't use to include extra buffers setup by libata core
layer and my be odd.  This patch makes qc->nbytes include any extra
buffers setup by libata core layer and guaranteed to be aligned on 4
byte boundary.

This value is to be used to program the host controller.  As this
represents the actual length of buffer available to the controller and
the controller must be able to deal with short transfers for ATAPI
commands which can transfer variable length, this shouldn't break any
controllers while making problems like rounding-down and controllers
choking up on odd transfer bytes much less likely.

The unmodified value is stored in new field qc->raw_nbytes.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-23 05:24:15 -05:00
..
ahci.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
ata_generic.c libata: kill ata_id_to_dma_mode() 2008-01-23 05:24:11 -05:00
ata_piix.c ata_piix: separate controller IDs into separate enum 2008-01-23 05:24:12 -05:00
Kconfig pata_ninja32: Cardbus ATA initial support 2008-01-23 05:24:10 -05:00
libata-acpi.c libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() 2008-01-23 05:24:12 -05:00
libata-core.c libata: make qc->nbytes include extra buffers 2008-01-23 05:24:15 -05:00
libata-eh.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
libata-pmp.c libata-pmp: 4726 hates SRST 2008-01-10 16:53:12 -05:00
libata-scsi.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
libata-sff.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
libata.h libata: move ata_set_mode() to libata-eh.c 2008-01-23 05:24:10 -05:00
Makefile pata_ninja32: Cardbus ATA initial support 2008-01-23 05:24:10 -05:00
pata_acpi.c libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi 2008-01-23 05:24:12 -05:00
pata_ali.c libata: checkpatch fixes 2008-01-23 05:24:10 -05:00
pata_amd.c pata_amd: update mode selection for NV PATAs 2008-01-23 05:24:12 -05:00
pata_artop.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_at32.c Several fixes for the AVR32 PATA driver 2007-12-01 17:35:58 -05:00
pata_atiixp.c pata_atiixp: Audit notes on locking 2007-10-12 14:55:42 -04:00
pata_bf54x.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
pata_cmd64x.c pata_cmd64x.c typo fix 2007-10-20 01:02:48 +02:00
pata_cmd640.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cs5520.c [libata] struct pci_dev related cleanups 2007-10-12 14:55:47 -04:00
pata_cs5530.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5535.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5536.c pata_cs5536: MWDMA fix 2007-10-19 22:55:03 -04:00
pata_cypress.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_efar.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x2n.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x3.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_hpt37x.c pata_hpt37x: checkpatch fixes 2008-01-23 05:24:13 -05:00
pata_hpt366.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_icside.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
pata_isapnp.c pata_isapnp: Polled devices 2007-11-23 19:33:27 -05:00
pata_it821x.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_it8213.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ixp4xx_cf.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_jmicron.c pata_jmicron: fix disabled port handling in jmicron_pre_reset() 2007-11-23 19:23:55 -05:00
pata_legacy.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_marvell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_mpc52xx.c mpc52xx-ata: fix compile warning (unused variable) 2007-10-14 08:57:30 -07:00
pata_mpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_netcell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ninja32.c libata: checkpatch fixes 2008-01-23 05:24:10 -05:00
pata_ns87410.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_ns87415.c pata_ns87415: define SUPERIO_IDE_MAX_RETRIES 2007-10-29 06:21:33 -04:00
pata_oldpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_opti.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_optidma.c [libata] fix 'if(' and similar areas that lack whitespace 2007-10-29 06:15:27 -04:00
pata_pcmcia.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
pata_pdc202xx_old.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
pata_pdc2027x.c [libata] fix 'if(' and similar areas that lack whitespace 2007-10-29 06:15:27 -04:00
pata_platform.c libata: pata_platform: Support polling-mode configuration. 2007-11-08 13:08:41 -05:00
pata_qdi.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_radisys.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_rz1000.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sc1200.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_scc.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pata_serverworks.c pata_serverworks: Fix problem with some drive combinations 2007-11-05 18:08:46 -05:00
pata_sil680.c pata_sil680: kill bogus reset code (take 2) 2007-11-23 19:23:55 -05:00
pata_sis.c pata_sis.c: Add Packard Bell EasyNote K5305 to laptops 2007-11-19 12:28:11 +09:00
pata_sl82c105.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_triflex.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_via.c libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() 2008-01-23 05:24:12 -05:00
pata_winbond.c libata: update ->data_xfer hook for ATAPI 2008-01-23 05:24:14 -05:00
pdc_adma.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_fsl.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_inic162x.c libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* 2008-01-23 05:24:14 -05:00
sata_mv.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_nv.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_promise.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_promise.h
sata_qstor.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_sil24.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_sil.c libata: implement protocol tests 2008-01-23 05:24:10 -05:00
sata_sis.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_svw.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_sx4.c libata: convert to chained sg 2008-01-23 05:24:14 -05:00
sata_uli.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_via.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sata_vsc.c [libata] Address some checkpatch-spotted issues 2007-10-29 06:15:27 -04:00
sis.h libata: PATA-mode fixes for sis_sata 2007-07-02 10:17:42 -04:00