kernel_optimize_test/drivers/remoteproc/ste_modem_rproc.c
Suman Anna 9aa1cfca25 remoteproc/ste: add blank lines after declarations
Fix couple of checkpatch warnings of the type,
"WARNING: Missing a blank line after declarations"

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02 11:03:07 +03:00

343 lines
8.6 KiB
C

/*
* Copyright (C) ST-Ericsson AB 2012
* Author: Sjur Brændeland <sjur.brandeland@stericsson.com>
* License terms: GNU General Public License (GPL), version 2
*/
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/remoteproc.h>
#include <linux/ste_modem_shm.h>
#include "remoteproc_internal.h"
#define SPROC_FW_SIZE (50 * 4096)
#define SPROC_MAX_TOC_ENTRIES 32
#define SPROC_MAX_NOTIFY_ID 14
#define SPROC_RESOURCE_NAME "rsc-table"
#define SPROC_MODEM_NAME "ste-modem"
#define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin"
#define sproc_dbg(sproc, fmt, ...) \
dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
#define sproc_err(sproc, fmt, ...) \
dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
/* STE-modem control structure */
struct sproc {
struct rproc *rproc;
struct ste_modem_device *mdev;
int error;
void *fw_addr;
size_t fw_size;
dma_addr_t fw_dma_addr;
};
/* STE-Modem firmware entry */
struct ste_toc_entry {
__le32 start;
__le32 size;
__le32 flags;
__le32 entry_point;
__le32 load_addr;
char name[12];
};
/*
* The Table Of Content is located at the start of the firmware image and
* at offset zero in the shared memory region. The resource table typically
* contains the initial boot image (boot strap) and other information elements
* such as remoteproc resource table. Each entry is identified by a unique
* name.
*/
struct ste_toc {
struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES];
};
/* Loads the firmware to shared memory. */
static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw)
{
struct sproc *sproc = rproc->priv;
memcpy(sproc->fw_addr, fw->data, fw->size);
return 0;
}
/* Find the entry for resource table in the Table of Content */
static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data)
{
int i;
const struct ste_toc *toc = data;
/* Search the table for the resource table */
for (i = 0; i < SPROC_MAX_TOC_ENTRIES &&
toc->table[i].start != 0xffffffff; i++) {
if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME,
sizeof(toc->table[i].name)))
return &toc->table[i];
}
return NULL;
}
/* Find the resource table inside the remote processor's firmware. */
static struct resource_table *
sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
int *tablesz)
{
struct sproc *sproc = rproc->priv;
struct resource_table *table;
const struct ste_toc_entry *entry;
if (!fw)
return NULL;
entry = sproc_find_rsc_entry(fw->data);
if (!entry) {
sproc_err(sproc, "resource table not found in fw\n");
return NULL;
}
table = (void *)(fw->data + entry->start);
/* sanity check size and offset of resource table */
if (entry->start > SPROC_FW_SIZE ||
entry->size > SPROC_FW_SIZE ||
fw->size > SPROC_FW_SIZE ||
entry->start + entry->size > fw->size ||
sizeof(struct resource_table) > entry->size) {
sproc_err(sproc, "bad size of fw or resource table\n");
return NULL;
}
/* we don't support any version beyond the first */
if (table->ver != 1) {
sproc_err(sproc, "unsupported fw ver: %d\n", table->ver);
return NULL;
}
/* make sure reserved bytes are zeroes */
if (table->reserved[0] || table->reserved[1]) {
sproc_err(sproc, "non zero reserved bytes\n");
return NULL;
}
/* make sure the offsets array isn't truncated */
if (table->num > SPROC_MAX_TOC_ENTRIES ||
table->num * sizeof(table->offset[0]) +
sizeof(struct resource_table) > entry->size) {
sproc_err(sproc, "resource table incomplete\n");
return NULL;
}
/* If the fw size has grown, release the previous fw allocation */
if (SPROC_FW_SIZE < fw->size) {
sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n",
SPROC_FW_SIZE, fw->size);
return NULL;
}
sproc->fw_size = fw->size;
*tablesz = entry->size;
return table;
}
/* Find the resource table inside the remote processor's firmware. */
static struct resource_table *
sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw)
{
struct sproc *sproc = rproc->priv;
const struct ste_toc_entry *entry;
if (!fw || !sproc->fw_addr)
return NULL;
entry = sproc_find_rsc_entry(sproc->fw_addr);
if (!entry) {
sproc_err(sproc, "resource table not found in fw\n");
return NULL;
}
return sproc->fw_addr + entry->start;
}
/* STE modem firmware handler operations */
static const struct rproc_fw_ops sproc_fw_ops = {
.load = sproc_load_segments,
.find_rsc_table = sproc_find_rsc_table,
.find_loaded_rsc_table = sproc_find_loaded_rsc_table,
};
/* Kick the modem with specified notification id */
static void sproc_kick(struct rproc *rproc, int vqid)
{
struct sproc *sproc = rproc->priv;
sproc_dbg(sproc, "kick vqid:%d\n", vqid);
/*
* We need different notification IDs for RX and TX so add
* an offset on TX notification IDs.
*/
sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID);
}
/* Received a kick from a modem, kick the virtqueue */
static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid)
{
struct sproc *sproc = mdev->drv_data;
if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE)
sproc_dbg(sproc, "no message was found in vqid %d\n", vqid);
}
static struct ste_modem_dev_cb sproc_dev_cb = {
.kick = sproc_kick_callback,
};
/* Start the STE modem */
static int sproc_start(struct rproc *rproc)
{
struct sproc *sproc = rproc->priv;
int i, err;
sproc_dbg(sproc, "start ste-modem\n");
/* Sanity test the max_notifyid */
if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) {
sproc_err(sproc, "Notification IDs too high:%d\n",
rproc->max_notifyid);
return -EINVAL;
}
/* Subscribe to notifications */
for (i = 0; i <= rproc->max_notifyid; i++) {
err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i);
if (err) {
sproc_err(sproc,
"subscription of kicks failed:%d\n", err);
return err;
}
}
/* Request modem start-up*/
return sproc->mdev->ops.power(sproc->mdev, true);
}
/* Stop the STE modem */
static int sproc_stop(struct rproc *rproc)
{
struct sproc *sproc = rproc->priv;
sproc_dbg(sproc, "stop ste-modem\n");
return sproc->mdev->ops.power(sproc->mdev, false);
}
static struct rproc_ops sproc_ops = {
.start = sproc_start,
.stop = sproc_stop,
.kick = sproc_kick,
};
/* STE modem device is unregistered */
static int sproc_drv_remove(struct platform_device *pdev)
{
struct ste_modem_device *mdev =
container_of(pdev, struct ste_modem_device, pdev);
struct sproc *sproc = mdev->drv_data;
sproc_dbg(sproc, "remove ste-modem\n");
/* Reset device callback functions */
sproc->mdev->ops.setup(sproc->mdev, NULL);
/* Unregister as remoteproc device */
rproc_del(sproc->rproc);
dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE,
sproc->fw_addr, sproc->fw_dma_addr);
rproc_put(sproc->rproc);
mdev->drv_data = NULL;
return 0;
}
/* Handle probe of a modem device */
static int sproc_probe(struct platform_device *pdev)
{
struct ste_modem_device *mdev =
container_of(pdev, struct ste_modem_device, pdev);
struct sproc *sproc;
struct rproc *rproc;
int err;
dev_dbg(&mdev->pdev.dev, "probe ste-modem\n");
if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe ||
!mdev->ops.power) {
dev_err(&mdev->pdev.dev, "invalid mdev ops\n");
return -EINVAL;
}
rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops,
SPROC_MODEM_FIRMWARE, sizeof(*sproc));
if (!rproc)
return -ENOMEM;
sproc = rproc->priv;
sproc->mdev = mdev;
sproc->rproc = rproc;
rproc->has_iommu = false;
mdev->drv_data = sproc;
/* Provide callback functions to modem device */
sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb);
/* Set the STE-modem specific firmware handler */
rproc->fw_ops = &sproc_fw_ops;
/*
* STE-modem requires the firmware to be located
* at the start of the shared memory region. So we need to
* reserve space for firmware at the start.
*/
sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE,
&sproc->fw_dma_addr,
GFP_KERNEL);
if (!sproc->fw_addr) {
sproc_err(sproc, "Cannot allocate memory for fw\n");
err = -ENOMEM;
goto free_rproc;
}
/* Register as a remoteproc device */
err = rproc_add(rproc);
if (err)
goto free_mem;
return 0;
free_mem:
dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE,
sproc->fw_addr, sproc->fw_dma_addr);
free_rproc:
/* Reset device data upon error */
mdev->drv_data = NULL;
rproc_put(rproc);
return err;
}
static struct platform_driver sproc_driver = {
.driver = {
.name = SPROC_MODEM_NAME,
},
.probe = sproc_probe,
.remove = sproc_drv_remove,
};
module_platform_driver(sproc_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework");