kernel_optimize_test/arch/arm/mach-rockchip/pm.h
Chris Zhong 0ea001d3b4 ARM: rockchip: disable dapswjdp during suspend
Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
not "jtag_trstn". the AP would think this pin is always high, so it can
not reset before resume. When system resume, but the dapswjdp is not in
a default state, it may Access some illegal address, it cause system
crash during resume.
Let's disable this jtag function by clear the dapdeviceen bit, it
prohibit the dapswjdp to access memory and registers. This bit would
be enable in MASKROM, so we need clear it in suspend everytime.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-04-16 21:15:47 +02:00

116 lines
3.1 KiB
C

/*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
* Author: Tony Xie <tony.xie@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef __MACH_ROCKCHIP_PM_H
#define __MACH_ROCKCHIP_PM_H
extern unsigned long rkpm_bootdata_cpusp;
extern unsigned long rkpm_bootdata_cpu_code;
extern unsigned long rkpm_bootdata_l2ctlr_f;
extern unsigned long rkpm_bootdata_l2ctlr;
extern unsigned long rkpm_bootdata_ddr_code;
extern unsigned long rkpm_bootdata_ddr_data;
extern unsigned long rk3288_bootram_sz;
void rockchip_slp_cpu_resume(void);
#ifdef CONFIG_PM_SLEEP
void __init rockchip_suspend_init(void);
#else
static inline void rockchip_suspend_init(void)
{
}
#endif
/****** following is rk3288 defined **********/
#define RK3288_PMU_WAKEUP_CFG0 0x00
#define RK3288_PMU_WAKEUP_CFG1 0x04
#define RK3288_PMU_PWRMODE_CON 0x18
#define RK3288_PMU_OSC_CNT 0x20
#define RK3288_PMU_PLL_CNT 0x24
#define RK3288_PMU_STABL_CNT 0x28
#define RK3288_PMU_DDR0IO_PWRON_CNT 0x2c
#define RK3288_PMU_DDR1IO_PWRON_CNT 0x30
#define RK3288_PMU_CORE_PWRDWN_CNT 0x34
#define RK3288_PMU_CORE_PWRUP_CNT 0x38
#define RK3288_PMU_GPU_PWRDWN_CNT 0x3c
#define RK3288_PMU_GPU_PWRUP_CNT 0x40
#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44
#define RK3288_PMU_PWRMODE_CON1 0x90
#define RK3288_SGRF_SOC_CON0 (0x0000)
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
#define SGRF_PCLK_WDT_GATE BIT(6)
#define SGRF_PCLK_WDT_GATE_WRITE BIT(22)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
#define RK3288_SGRF_CPU_CON0 (0x40)
#define SGRF_DAPDEVICEEN BIT(0)
#define SGRF_DAPDEVICEEN_WRITE BIT(16)
#define RK3288_CRU_MODE_CON 0x50
#define RK3288_CRU_SEL0_CON 0x60
#define RK3288_CRU_SEL1_CON 0x64
#define RK3288_CRU_SEL10_CON 0x88
#define RK3288_CRU_SEL33_CON 0xe4
#define RK3288_CRU_SEL37_CON 0xf4
/* PMU_WAKEUP_CFG1 bits */
#define PMU_ARMINT_WAKEUP_EN BIT(0)
/* wait 30ms for OSC stable and 30ms for pmic stable */
#define OSC_STABL_CNT_THRESH (32 * 30)
#define PMU_STABL_CNT_THRESH (32 * 30)
enum rk3288_pwr_mode_con {
PMU_PWR_MODE_EN = 0,
PMU_CLK_CORE_SRC_GATE_EN,
PMU_GLOBAL_INT_DISABLE,
PMU_L2FLUSH_EN,
PMU_BUS_PD_EN,
PMU_A12_0_PD_EN,
PMU_SCU_EN,
PMU_PLL_PD_EN,
PMU_CHIP_PD_EN, /* POWER OFF PIN ENABLE */
PMU_PWROFF_COMB,
PMU_ALIVE_USE_LF,
PMU_PMU_USE_LF,
PMU_OSC_24M_DIS,
PMU_INPUT_CLAMP_EN,
PMU_WAKEUP_RESET_EN,
PMU_SREF0_ENTER_EN,
PMU_SREF1_ENTER_EN,
PMU_DDR0IO_RET_EN,
PMU_DDR1IO_RET_EN,
PMU_DDR0_GATING_EN,
PMU_DDR1_GATING_EN,
PMU_DDR0IO_RET_DE_REQ,
PMU_DDR1IO_RET_DE_REQ
};
enum rk3288_pwr_mode_con1 {
PMU_CLR_BUS = 0,
PMU_CLR_CORE,
PMU_CLR_CPUP,
PMU_CLR_ALIVE,
PMU_CLR_DMA,
PMU_CLR_PERI,
PMU_CLR_GPU,
PMU_CLR_VIDEO,
PMU_CLR_HEVC,
PMU_CLR_VIO,
};
#endif /* __MACH_ROCKCHIP_PM_H */