forked from luck/tmp_suning_uos_patched
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
48 lines
1.8 KiB
Plaintext
48 lines
1.8 KiB
Plaintext
The SA1100 serial port had its major/minor numbers officially assigned:
|
|
|
|
> Date: Sun, 24 Sep 2000 21:40:27 -0700
|
|
> From: H. Peter Anvin <hpa@transmeta.com>
|
|
> To: Nicolas Pitre <nico@CAM.ORG>
|
|
> Cc: Device List Maintainer <device@lanana.org>
|
|
> Subject: Re: device
|
|
>
|
|
> Okay. Note that device numbers 204 and 205 are used for "low density
|
|
> serial devices", so you will have a range of minors on those majors (the
|
|
> tty device layer handles this just fine, so you don't have to worry about
|
|
> doing anything special.)
|
|
>
|
|
> So your assignments are:
|
|
>
|
|
> 204 char Low-density serial ports
|
|
> 5 = /dev/ttySA0 SA1100 builtin serial port 0
|
|
> 6 = /dev/ttySA1 SA1100 builtin serial port 1
|
|
> 7 = /dev/ttySA2 SA1100 builtin serial port 2
|
|
>
|
|
> 205 char Low-density serial ports (alternate device)
|
|
> 5 = /dev/cusa0 Callout device for ttySA0
|
|
> 6 = /dev/cusa1 Callout device for ttySA1
|
|
> 7 = /dev/cusa2 Callout device for ttySA2
|
|
>
|
|
|
|
If you're not using devfs, you must create those inodes in /dev
|
|
on the root filesystem used by your SA1100-based device:
|
|
|
|
mknod ttySA0 c 204 5
|
|
mknod ttySA1 c 204 6
|
|
mknod ttySA2 c 204 7
|
|
mknod cusa0 c 205 5
|
|
mknod cusa1 c 205 6
|
|
mknod cusa2 c 205 7
|
|
|
|
In addition to the creation of the appropriate device nodes above, you
|
|
must ensure your user space applications make use of the correct device
|
|
name. The classic example is the content of the /etc/inittab file where
|
|
you might have a getty process started on ttyS0. In this case:
|
|
|
|
- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
|
|
|
|
- don't forget to add 'ttySA0', 'console', or the appropriate tty name
|
|
in /etc/securetty for root to be allowed to login as well.
|
|
|
|
|