kernel_optimize_test/include/linux/percpu-refcount.h
Linus Torvalds c798360cd1 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "A lot of activities on percpu front.  Notable changes are...

   - percpu allocator now can take @gfp.  If @gfp doesn't contain
     GFP_KERNEL, it tries to allocate from what's already available to
     the allocator and a work item tries to keep the reserve around
     certain level so that these atomic allocations usually succeed.

     This will replace the ad-hoc percpu memory pool used by
     blk-throttle and also be used by the planned blkcg support for
     writeback IOs.

     Please note that I noticed a bug in how @gfp is interpreted while
     preparing this pull request and applied the fix 6ae833c7fe
     ("percpu: fix how @gfp is interpreted by the percpu allocator")
     just now.

   - percpu_ref now uses longs for percpu and global counters instead of
     ints.  It leads to more sparse packing of the percpu counters on
     64bit machines but the overhead should be negligible and this
     allows using percpu_ref for refcnting pages and in-memory objects
     directly.

   - The switching between percpu and single counter modes of a
     percpu_ref is made independent of putting the base ref and a
     percpu_ref can now optionally be initialized in single or killed
     mode.  This allows avoiding percpu shutdown latency for cases where
     the refcounted objects may be synchronously created and destroyed
     in rapid succession with only a fraction of them reaching fully
     operational status (SCSI probing does this when combined with
     blk-mq support).  It's also planned to be used to implement forced
     single mode to detect underflow more timely for debugging.

  There's a separate branch percpu/for-3.18-consistent-ops which cleans
  up the duplicate percpu accessors.  That branch causes a number of
  conflicts with s390 and other trees.  I'll send a separate pull
  request w/ resolutions once other branches are merged"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
  percpu: fix how @gfp is interpreted by the percpu allocator
  blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
  percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
  percpu_ref: add PERCPU_REF_INIT_* flags
  percpu_ref: decouple switching to percpu mode and reinit
  percpu_ref: decouple switching to atomic mode and killing
  percpu_ref: add PCPU_REF_DEAD
  percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
  percpu_ref: replace pcpu_ prefix with percpu_
  percpu_ref: minor code and comment updates
  percpu_ref: relocate percpu_ref_reinit()
  Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
  Revert "percpu: free percpu allocation info for uniprocessor system"
  percpu-refcount: make percpu_ref based on longs instead of ints
  percpu-refcount: improve WARN messages
  percpu: fix locking regression in the failure path of pcpu_alloc()
  percpu-refcount: add @gfp to percpu_ref_init()
  proportions: add @gfp to init functions
  percpu_counter: add @gfp to percpu_counter_init()
  percpu_counter: make percpu_counters_lock irq-safe
  ...
2014-10-10 07:26:02 -04:00

268 lines
8.0 KiB
C

/*
* Percpu refcounts:
* (C) 2012 Google, Inc.
* Author: Kent Overstreet <koverstreet@google.com>
*
* This implements a refcount with similar semantics to atomic_t - atomic_inc(),
* atomic_dec_and_test() - but percpu.
*
* There's one important difference between percpu refs and normal atomic_t
* refcounts; you have to keep track of your initial refcount, and then when you
* start shutting down you call percpu_ref_kill() _before_ dropping the initial
* refcount.
*
* The refcount will have a range of 0 to ((1U << 31) - 1), i.e. one bit less
* than an atomic_t - this is because of the way shutdown works, see
* percpu_ref_kill()/PERCPU_COUNT_BIAS.
*
* Before you call percpu_ref_kill(), percpu_ref_put() does not check for the
* refcount hitting 0 - it can't, if it was in percpu mode. percpu_ref_kill()
* puts the ref back in single atomic_t mode, collecting the per cpu refs and
* issuing the appropriate barriers, and then marks the ref as shutting down so
* that percpu_ref_put() will check for the ref hitting 0. After it returns,
* it's safe to drop the initial ref.
*
* USAGE:
*
* See fs/aio.c for some example usage; it's used there for struct kioctx, which
* is created when userspaces calls io_setup(), and destroyed when userspace
* calls io_destroy() or the process exits.
*
* In the aio code, kill_ioctx() is called when we wish to destroy a kioctx; it
* calls percpu_ref_kill(), then hlist_del_rcu() and synchronize_rcu() to remove
* the kioctx from the proccess's list of kioctxs - after that, there can't be
* any new users of the kioctx (from lookup_ioctx()) and it's then safe to drop
* the initial ref with percpu_ref_put().
*
* Code that does a two stage shutdown like this often needs some kind of
* explicit synchronization to ensure the initial refcount can only be dropped
* once - percpu_ref_kill() does this for you, it returns true once and false if
* someone else already called it. The aio code uses it this way, but it's not
* necessary if the code has some other mechanism to synchronize teardown.
* around.
*/
#ifndef _LINUX_PERCPU_REFCOUNT_H
#define _LINUX_PERCPU_REFCOUNT_H
#include <linux/atomic.h>
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/rcupdate.h>
#include <linux/gfp.h>
struct percpu_ref;
typedef void (percpu_ref_func_t)(struct percpu_ref *);
/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
enum {
__PERCPU_REF_ATOMIC = 1LU << 0, /* operating in atomic mode */
__PERCPU_REF_DEAD = 1LU << 1, /* (being) killed */
__PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
__PERCPU_REF_FLAG_BITS = 2,
};
/* @flags for percpu_ref_init() */
enum {
/*
* Start w/ ref == 1 in atomic mode. Can be switched to percpu
* operation using percpu_ref_switch_to_percpu(). If initialized
* with this flag, the ref will stay in atomic mode until
* percpu_ref_switch_to_percpu() is invoked on it.
*/
PERCPU_REF_INIT_ATOMIC = 1 << 0,
/*
* Start dead w/ ref == 0 in atomic mode. Must be revived with
* percpu_ref_reinit() before used. Implies INIT_ATOMIC.
*/
PERCPU_REF_INIT_DEAD = 1 << 1,
};
struct percpu_ref {
atomic_long_t count;
/*
* The low bit of the pointer indicates whether the ref is in percpu
* mode; if set, then get/put will manipulate the atomic_t.
*/
unsigned long percpu_count_ptr;
percpu_ref_func_t *release;
percpu_ref_func_t *confirm_switch;
bool force_atomic:1;
struct rcu_head rcu;
};
int __must_check percpu_ref_init(struct percpu_ref *ref,
percpu_ref_func_t *release, unsigned int flags,
gfp_t gfp);
void percpu_ref_exit(struct percpu_ref *ref);
void percpu_ref_switch_to_atomic(struct percpu_ref *ref,
percpu_ref_func_t *confirm_switch);
void percpu_ref_switch_to_percpu(struct percpu_ref *ref);
void percpu_ref_kill_and_confirm(struct percpu_ref *ref,
percpu_ref_func_t *confirm_kill);
void percpu_ref_reinit(struct percpu_ref *ref);
/**
* percpu_ref_kill - drop the initial ref
* @ref: percpu_ref to kill
*
* Must be used to drop the initial ref on a percpu refcount; must be called
* precisely once before shutdown.
*
* Puts @ref in non percpu mode, then does a call_rcu() before gathering up the
* percpu counters and dropping the initial ref.
*/
static inline void percpu_ref_kill(struct percpu_ref *ref)
{
return percpu_ref_kill_and_confirm(ref, NULL);
}
/*
* Internal helper. Don't use outside percpu-refcount proper. The
* function doesn't return the pointer and let the caller test it for NULL
* because doing so forces the compiler to generate two conditional
* branches as it can't assume that @ref->percpu_count is not NULL.
*/
static inline bool __ref_is_percpu(struct percpu_ref *ref,
unsigned long __percpu **percpu_countp)
{
unsigned long percpu_ptr = ACCESS_ONCE(ref->percpu_count_ptr);
/* paired with smp_store_release() in percpu_ref_reinit() */
smp_read_barrier_depends();
if (unlikely(percpu_ptr & __PERCPU_REF_ATOMIC))
return false;
*percpu_countp = (unsigned long __percpu *)percpu_ptr;
return true;
}
/**
* percpu_ref_get - increment a percpu refcount
* @ref: percpu_ref to get
*
* Analagous to atomic_long_inc().
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_get(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count))
this_cpu_inc(*percpu_count);
else
atomic_long_inc(&ref->count);
rcu_read_unlock_sched();
}
/**
* percpu_ref_tryget - try to increment a percpu refcount
* @ref: percpu_ref to try-get
*
* Increment a percpu refcount unless its count already reached zero.
* Returns %true on success; %false on failure.
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_tryget(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
int ret;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count)) {
this_cpu_inc(*percpu_count);
ret = true;
} else {
ret = atomic_long_inc_not_zero(&ref->count);
}
rcu_read_unlock_sched();
return ret;
}
/**
* percpu_ref_tryget_live - try to increment a live percpu refcount
* @ref: percpu_ref to try-get
*
* Increment a percpu refcount unless it has already been killed. Returns
* %true on success; %false on failure.
*
* Completion of percpu_ref_kill() in itself doesn't guarantee that this
* function will fail. For such guarantee, percpu_ref_kill_and_confirm()
* should be used. After the confirm_kill callback is invoked, it's
* guaranteed that no new reference will be given out by
* percpu_ref_tryget_live().
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_tryget_live(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
int ret = false;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count)) {
this_cpu_inc(*percpu_count);
ret = true;
} else if (!(ACCESS_ONCE(ref->percpu_count_ptr) & __PERCPU_REF_DEAD)) {
ret = atomic_long_inc_not_zero(&ref->count);
}
rcu_read_unlock_sched();
return ret;
}
/**
* percpu_ref_put - decrement a percpu refcount
* @ref: percpu_ref to put
*
* Decrement the refcount, and if 0, call the release function (which was passed
* to percpu_ref_init())
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_put(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count))
this_cpu_dec(*percpu_count);
else if (unlikely(atomic_long_dec_and_test(&ref->count)))
ref->release(ref);
rcu_read_unlock_sched();
}
/**
* percpu_ref_is_zero - test whether a percpu refcount reached zero
* @ref: percpu_ref to test
*
* Returns %true if @ref reached zero.
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_is_zero(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
if (__ref_is_percpu(ref, &percpu_count))
return false;
return !atomic_long_read(&ref->count);
}
#endif