forked from luck/tmp_suning_uos_patched
3f1a9696ae
This pin-muxing is best done in the board files. The driver should not do this explicitly. Also, this code causes a warning to be thrown when OMAP2430 and OMAP3/4 support are enabled in the same kernel. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
325 lines
8.3 KiB
C
325 lines
8.3 KiB
C
/*
|
|
* Copyright (C) 2005-2007 by Texas Instruments
|
|
* Some code has been taken from tusb6010.c
|
|
* Copyrights for that are attributable to:
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* The Inventra Controller Driver for Linux is free software; you
|
|
* can redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License version 2 as published by the Free Software
|
|
* Foundation.
|
|
*
|
|
* The Inventra Controller Driver for Linux is distributed in
|
|
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
* License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with The Inventra Controller Driver for Linux ; if not,
|
|
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
|
* Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "musb_core.h"
|
|
#include "omap2430.h"
|
|
|
|
|
|
static struct timer_list musb_idle_timer;
|
|
|
|
static void musb_do_idle(unsigned long _musb)
|
|
{
|
|
struct musb *musb = (void *)_musb;
|
|
unsigned long flags;
|
|
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
|
u8 power;
|
|
#endif
|
|
u8 devctl;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
switch (musb->xceiv->state) {
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
break;
|
|
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
|
case OTG_STATE_A_SUSPEND:
|
|
/* finish RESUME signaling? */
|
|
if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
|
|
power = musb_readb(musb->mregs, MUSB_POWER);
|
|
power &= ~MUSB_POWER_RESUME;
|
|
DBG(1, "root port resume stopped, power %02x\n", power);
|
|
musb_writeb(musb->mregs, MUSB_POWER, power);
|
|
musb->is_active = 1;
|
|
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
|
|
| MUSB_PORT_STAT_RESUME);
|
|
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
|
|
usb_hcd_poll_rh_status(musb_to_hcd(musb));
|
|
/* NOTE: it might really be A_WAIT_BCON ... */
|
|
musb->xceiv->state = OTG_STATE_A_HOST;
|
|
}
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
|
case OTG_STATE_A_HOST:
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE)
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
else
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
}
|
|
|
|
|
|
void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
|
|
{
|
|
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
|
|
static unsigned long last_timer;
|
|
|
|
if (timeout == 0)
|
|
timeout = default_timeout;
|
|
|
|
/* Never idle if active, or when VBUS timeout is not set as host */
|
|
if (musb->is_active || ((musb->a_wait_bcon == 0)
|
|
&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
|
|
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
|
|
del_timer(&musb_idle_timer);
|
|
last_timer = jiffies;
|
|
return;
|
|
}
|
|
|
|
if (time_after(last_timer, timeout)) {
|
|
if (!timer_pending(&musb_idle_timer))
|
|
last_timer = timeout;
|
|
else {
|
|
DBG(4, "Longer idle timer already pending, ignoring\n");
|
|
return;
|
|
}
|
|
}
|
|
last_timer = timeout;
|
|
|
|
DBG(4, "%s inactive, for idle timer for %lu ms\n",
|
|
otg_state_string(musb),
|
|
(unsigned long)jiffies_to_msecs(timeout - jiffies));
|
|
mod_timer(&musb_idle_timer, timeout);
|
|
}
|
|
|
|
void musb_platform_enable(struct musb *musb)
|
|
{
|
|
}
|
|
void musb_platform_disable(struct musb *musb)
|
|
{
|
|
}
|
|
static void omap_set_vbus(struct musb *musb, int is_on)
|
|
{
|
|
u8 devctl;
|
|
/* HDRC controls CPEN, but beware current surges during device
|
|
* connect. They can trigger transient overcurrent conditions
|
|
* that must be ignored.
|
|
*/
|
|
|
|
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
if (is_on) {
|
|
musb->is_active = 1;
|
|
musb->xceiv->default_a = 1;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
|
|
MUSB_HST_MODE(musb);
|
|
} else {
|
|
musb->is_active = 0;
|
|
|
|
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
|
|
* jumping right to B_IDLE...
|
|
*/
|
|
|
|
musb->xceiv->default_a = 0;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
|
|
MUSB_DEV_MODE(musb);
|
|
}
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
DBG(1, "VBUS %s, devctl %02x "
|
|
/* otg %3x conf %08x prcm %08x */ "\n",
|
|
otg_state_string(musb),
|
|
musb_readb(musb->mregs, MUSB_DEVCTL));
|
|
}
|
|
|
|
static int musb_platform_resume(struct musb *musb);
|
|
|
|
int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
|
|
{
|
|
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
|
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init musb_platform_init(struct musb *musb, void *board_data)
|
|
{
|
|
u32 l;
|
|
struct omap_musb_board_data *data = board_data;
|
|
|
|
/* We require some kind of external transceiver, hooked
|
|
* up through ULPI. TWL4030-family PMICs include one,
|
|
* which needs a driver, drivers aren't always needed.
|
|
*/
|
|
musb->xceiv = otg_get_transceiver();
|
|
if (!musb->xceiv) {
|
|
pr_err("HS USB OTG: no transceiver configured\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
musb_platform_resume(musb);
|
|
|
|
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
|
|
l &= ~ENABLEWAKEUP; /* disable wakeup */
|
|
l &= ~NOSTDBY; /* remove possible nostdby */
|
|
l |= SMARTSTDBY; /* enable smart standby */
|
|
l &= ~AUTOIDLE; /* disable auto idle */
|
|
l &= ~NOIDLE; /* remove possible noidle */
|
|
l |= SMARTIDLE; /* enable smart idle */
|
|
/*
|
|
* MUSB AUTOIDLE don't work in 3430.
|
|
* Workaround by Richard Woodruff/TI
|
|
*/
|
|
if (!cpu_is_omap3430())
|
|
l |= AUTOIDLE; /* enable auto idle */
|
|
musb_writel(musb->mregs, OTG_SYSCONFIG, l);
|
|
|
|
l = musb_readl(musb->mregs, OTG_INTERFSEL);
|
|
|
|
if (data->interface_type == MUSB_INTERFACE_UTMI) {
|
|
/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
|
|
l &= ~ULPI_12PIN; /* Disable ULPI */
|
|
l |= UTMI_8BIT; /* Enable UTMI */
|
|
} else {
|
|
l |= ULPI_12PIN;
|
|
}
|
|
|
|
musb_writel(musb->mregs, OTG_INTERFSEL, l);
|
|
|
|
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
|
|
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
|
|
musb_readl(musb->mregs, OTG_REVISION),
|
|
musb_readl(musb->mregs, OTG_SYSCONFIG),
|
|
musb_readl(musb->mregs, OTG_SYSSTATUS),
|
|
musb_readl(musb->mregs, OTG_INTERFSEL),
|
|
musb_readl(musb->mregs, OTG_SIMENABLE));
|
|
|
|
if (is_host_enabled(musb))
|
|
musb->board_set_vbus = omap_set_vbus;
|
|
|
|
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
void musb_platform_save_context(struct musb *musb,
|
|
struct musb_context_registers *musb_context)
|
|
{
|
|
musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
|
|
musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
}
|
|
|
|
void musb_platform_restore_context(struct musb *musb,
|
|
struct musb_context_registers *musb_context)
|
|
{
|
|
musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
|
|
}
|
|
#endif
|
|
|
|
static int musb_platform_suspend(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
if (!musb->clock)
|
|
return 0;
|
|
|
|
/* in any role */
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l |= ENABLEFORCE; /* enable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
|
|
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
|
|
l |= ENABLEWAKEUP; /* enable wakeup */
|
|
musb_writel(musb->mregs, OTG_SYSCONFIG, l);
|
|
|
|
otg_set_suspend(musb->xceiv, 1);
|
|
|
|
if (musb->set_clock)
|
|
musb->set_clock(musb->clock, 0);
|
|
else
|
|
clk_disable(musb->clock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int musb_platform_resume(struct musb *musb)
|
|
{
|
|
u32 l;
|
|
|
|
if (!musb->clock)
|
|
return 0;
|
|
|
|
otg_set_suspend(musb->xceiv, 0);
|
|
|
|
if (musb->set_clock)
|
|
musb->set_clock(musb->clock, 1);
|
|
else
|
|
clk_enable(musb->clock);
|
|
|
|
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
|
|
l &= ~ENABLEWAKEUP; /* disable wakeup */
|
|
musb_writel(musb->mregs, OTG_SYSCONFIG, l);
|
|
|
|
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
|
|
l &= ~ENABLEFORCE; /* disable MSTANDBY */
|
|
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int musb_platform_exit(struct musb *musb)
|
|
{
|
|
|
|
musb_platform_suspend(musb);
|
|
|
|
return 0;
|
|
}
|