kernel_optimize_test/drivers/i2c/busses/i2c-designware-baytrail.c
Jean Delvare 942ab128ea i2c: designware-platform: Drop duplicate module information
The i2c-designware-platform module has duplicate module information
when CONFIG_I2C_DESIGNWARE_BAYTRAIL is set. It gets the information
from both i2c-designware-platdrv and i2c-designware-baytrail. The
latter is optional extra code which ends up in the same module so it
should not export module information.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-12 20:40:13 +01:00

153 lines
3.6 KiB
C

/*
* Intel BayTrail PMIC I2C bus semaphore implementaion
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <asm/iosf_mbi.h>
#include "i2c-designware-core.h"
#define SEMAPHORE_TIMEOUT 100
#define PUNIT_SEMAPHORE 0x7
#define PUNIT_SEMAPHORE_BIT BIT(0)
#define PUNIT_SEMAPHORE_ACQUIRE BIT(1)
static unsigned long acquired;
static int get_sem(struct device *dev, u32 *sem)
{
u32 data;
int ret;
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
if (ret) {
dev_err(dev, "iosf failed to read punit semaphore\n");
return ret;
}
*sem = data & PUNIT_SEMAPHORE_BIT;
return 0;
}
static void reset_semaphore(struct device *dev)
{
u32 data;
if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
dev_err(dev, "iosf failed to reset punit semaphore during read\n");
return;
}
data &= ~PUNIT_SEMAPHORE_BIT;
if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
dev_err(dev, "iosf failed to reset punit semaphore during write\n");
}
static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
{
u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
int ret;
unsigned long start, end;
might_sleep();
if (!dev || !dev->dev)
return -ENODEV;
if (!dev->release_lock)
return 0;
/* host driver writes to side band semaphore register */
ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, sem);
if (ret) {
dev_err(dev->dev, "iosf punit semaphore request failed\n");
return ret;
}
/* host driver waits for bit 0 to be set in semaphore register */
start = jiffies;
end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
do {
ret = get_sem(dev->dev, &sem);
if (!ret && sem) {
acquired = jiffies;
dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
jiffies_to_msecs(jiffies - start));
return 0;
}
usleep_range(1000, 2000);
} while (time_before(jiffies, end));
dev_err(dev->dev, "punit semaphore timed out, resetting\n");
reset_semaphore(dev->dev);
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
if (ret)
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
else
dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
WARN_ON(1);
return -ETIMEDOUT;
}
static void baytrail_i2c_release(struct dw_i2c_dev *dev)
{
if (!dev || !dev->dev)
return;
if (!dev->acquire_lock)
return;
reset_semaphore(dev->dev);
dev_dbg(dev->dev, "punit semaphore held for %ums\n",
jiffies_to_msecs(jiffies - acquired));
}
int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
{
acpi_status status;
unsigned long long shared_host = 0;
acpi_handle handle;
if (!dev || !dev->dev)
return 0;
handle = ACPI_HANDLE(dev->dev);
if (!handle)
return 0;
status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
if (ACPI_FAILURE(status))
return 0;
if (shared_host) {
dev_info(dev->dev, "I2C bus managed by PUNIT\n");
dev->acquire_lock = baytrail_i2c_acquire;
dev->release_lock = baytrail_i2c_release;
dev->pm_runtime_disabled = true;
}
if (!iosf_mbi_available())
return -EPROBE_DEFER;
return 0;
}