forked from luck/tmp_suning_uos_patched
4c21541d8d
Using pci_alloc_irq_vectors() instead of the deprecated pci_enable_msix() allows to remove the msix_entry from struct octeon_i2c and thus to get rid of the config symbol check. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
219 lines
6.5 KiB
C
219 lines
6.5 KiB
C
#include <linux/atomic.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-smbus.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
|
|
/* Controller command patterns */
|
|
#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
|
|
#define SW_TWSI_EIA BIT_ULL(61) /* Extended internal address */
|
|
#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */
|
|
#define SW_TWSI_SOVR BIT_ULL(55) /* Size override */
|
|
#define SW_TWSI_SIZE_SHIFT 52
|
|
#define SW_TWSI_ADDR_SHIFT 40
|
|
#define SW_TWSI_IA_SHIFT 32 /* Internal address */
|
|
|
|
/* Controller opcode word (bits 60:57) */
|
|
#define SW_TWSI_OP_SHIFT 57
|
|
#define SW_TWSI_OP_7 (0ULL << SW_TWSI_OP_SHIFT)
|
|
#define SW_TWSI_OP_7_IA (1ULL << SW_TWSI_OP_SHIFT)
|
|
#define SW_TWSI_OP_10 (2ULL << SW_TWSI_OP_SHIFT)
|
|
#define SW_TWSI_OP_10_IA (3ULL << SW_TWSI_OP_SHIFT)
|
|
#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT)
|
|
#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
|
|
|
|
/* Controller extended opcode word (bits 34:32) */
|
|
#define SW_TWSI_EOP_SHIFT 32
|
|
#define SW_TWSI_EOP_TWSI_DATA (SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
|
|
#define SW_TWSI_EOP_TWSI_CTL (SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
|
|
#define SW_TWSI_EOP_TWSI_CLKCTL (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
|
|
#define SW_TWSI_EOP_TWSI_STAT (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
|
|
#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
|
|
|
|
/* Controller command and status bits */
|
|
#define TWSI_CTL_CE 0x80 /* High level controller enable */
|
|
#define TWSI_CTL_ENAB 0x40 /* Bus enable */
|
|
#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
|
|
#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
|
|
#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
|
|
#define TWSI_CTL_AAK 0x04 /* Assert ACK */
|
|
|
|
/* Status values */
|
|
#define STAT_ERROR 0x00
|
|
#define STAT_START 0x08
|
|
#define STAT_REP_START 0x10
|
|
#define STAT_TXADDR_ACK 0x18
|
|
#define STAT_TXADDR_NAK 0x20
|
|
#define STAT_TXDATA_ACK 0x28
|
|
#define STAT_TXDATA_NAK 0x30
|
|
#define STAT_LOST_ARB_38 0x38
|
|
#define STAT_RXADDR_ACK 0x40
|
|
#define STAT_RXADDR_NAK 0x48
|
|
#define STAT_RXDATA_ACK 0x50
|
|
#define STAT_RXDATA_NAK 0x58
|
|
#define STAT_SLAVE_60 0x60
|
|
#define STAT_LOST_ARB_68 0x68
|
|
#define STAT_SLAVE_70 0x70
|
|
#define STAT_LOST_ARB_78 0x78
|
|
#define STAT_SLAVE_80 0x80
|
|
#define STAT_SLAVE_88 0x88
|
|
#define STAT_GENDATA_ACK 0x90
|
|
#define STAT_GENDATA_NAK 0x98
|
|
#define STAT_SLAVE_A0 0xA0
|
|
#define STAT_SLAVE_A8 0xA8
|
|
#define STAT_LOST_ARB_B0 0xB0
|
|
#define STAT_SLAVE_LOST 0xB8
|
|
#define STAT_SLAVE_NAK 0xC0
|
|
#define STAT_SLAVE_ACK 0xC8
|
|
#define STAT_AD2W_ACK 0xD0
|
|
#define STAT_AD2W_NAK 0xD8
|
|
#define STAT_IDLE 0xF8
|
|
|
|
/* TWSI_INT values */
|
|
#define TWSI_INT_ST_INT BIT_ULL(0)
|
|
#define TWSI_INT_TS_INT BIT_ULL(1)
|
|
#define TWSI_INT_CORE_INT BIT_ULL(2)
|
|
#define TWSI_INT_ST_EN BIT_ULL(4)
|
|
#define TWSI_INT_TS_EN BIT_ULL(5)
|
|
#define TWSI_INT_CORE_EN BIT_ULL(6)
|
|
#define TWSI_INT_SDA_OVR BIT_ULL(8)
|
|
#define TWSI_INT_SCL_OVR BIT_ULL(9)
|
|
#define TWSI_INT_SDA BIT_ULL(10)
|
|
#define TWSI_INT_SCL BIT_ULL(11)
|
|
|
|
#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
|
|
|
|
/* Register offsets */
|
|
struct octeon_i2c_reg_offset {
|
|
unsigned int sw_twsi;
|
|
unsigned int twsi_int;
|
|
unsigned int sw_twsi_ext;
|
|
};
|
|
|
|
#define SW_TWSI(x) (x->roff.sw_twsi)
|
|
#define TWSI_INT(x) (x->roff.twsi_int)
|
|
#define SW_TWSI_EXT(x) (x->roff.sw_twsi_ext)
|
|
|
|
struct octeon_i2c {
|
|
wait_queue_head_t queue;
|
|
struct i2c_adapter adap;
|
|
struct octeon_i2c_reg_offset roff;
|
|
struct clk *clk;
|
|
int irq;
|
|
int hlc_irq; /* For cn7890 only */
|
|
u32 twsi_freq;
|
|
int sys_freq;
|
|
void __iomem *twsi_base;
|
|
struct device *dev;
|
|
bool hlc_enabled;
|
|
bool broken_irq_mode;
|
|
bool broken_irq_check;
|
|
void (*int_enable)(struct octeon_i2c *);
|
|
void (*int_disable)(struct octeon_i2c *);
|
|
void (*hlc_int_enable)(struct octeon_i2c *);
|
|
void (*hlc_int_disable)(struct octeon_i2c *);
|
|
atomic_t int_enable_cnt;
|
|
atomic_t hlc_int_enable_cnt;
|
|
struct i2c_smbus_alert_setup alert_data;
|
|
struct i2c_client *ara;
|
|
};
|
|
|
|
static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
|
|
{
|
|
__raw_writeq(val, addr);
|
|
__raw_readq(addr); /* wait for write to land */
|
|
}
|
|
|
|
/**
|
|
* octeon_i2c_reg_write - write an I2C core register
|
|
* @i2c: The struct octeon_i2c
|
|
* @eop_reg: Register selector
|
|
* @data: Value to be written
|
|
*
|
|
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
|
|
*/
|
|
static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
|
|
{
|
|
int tries = 1000;
|
|
u64 tmp;
|
|
|
|
__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
|
|
do {
|
|
tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
|
|
if (--tries < 0)
|
|
return;
|
|
} while ((tmp & SW_TWSI_V) != 0);
|
|
}
|
|
|
|
#define octeon_i2c_ctl_write(i2c, val) \
|
|
octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
|
|
#define octeon_i2c_data_write(i2c, val) \
|
|
octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
|
|
|
|
/**
|
|
* octeon_i2c_reg_read - read lower bits of an I2C core register
|
|
* @i2c: The struct octeon_i2c
|
|
* @eop_reg: Register selector
|
|
*
|
|
* Returns the data.
|
|
*
|
|
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
|
|
*/
|
|
static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
|
|
int *error)
|
|
{
|
|
int tries = 1000;
|
|
u64 tmp;
|
|
|
|
__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
|
|
do {
|
|
tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
|
|
if (--tries < 0) {
|
|
/* signal that the returned data is invalid */
|
|
if (error)
|
|
*error = -EIO;
|
|
return 0;
|
|
}
|
|
} while ((tmp & SW_TWSI_V) != 0);
|
|
|
|
return tmp & 0xFF;
|
|
}
|
|
|
|
#define octeon_i2c_ctl_read(i2c) \
|
|
octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL, NULL)
|
|
#define octeon_i2c_data_read(i2c, error) \
|
|
octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA, error)
|
|
#define octeon_i2c_stat_read(i2c) \
|
|
octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)
|
|
|
|
/**
|
|
* octeon_i2c_read_int - read the TWSI_INT register
|
|
* @i2c: The struct octeon_i2c
|
|
*
|
|
* Returns the value of the register.
|
|
*/
|
|
static inline u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
|
|
{
|
|
return __raw_readq(i2c->twsi_base + TWSI_INT(i2c));
|
|
}
|
|
|
|
/**
|
|
* octeon_i2c_write_int - write the TWSI_INT register
|
|
* @i2c: The struct octeon_i2c
|
|
* @data: Value to be written
|
|
*/
|
|
static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
|
|
{
|
|
octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
|
|
}
|
|
|
|
/* Prototypes */
|
|
irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
|
|
int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
|
|
int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c);
|
|
void octeon_i2c_set_clock(struct octeon_i2c *i2c);
|
|
extern struct i2c_bus_recovery_info octeon_i2c_recovery_info;
|