kernel_optimize_test/Documentation/powerpc/mpc52xx.rst
Mauro Carvalho Chehab 4d2e26a38f docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-17 06:57:51 -03:00

44 lines
1.2 KiB
ReStructuredText

=============================
Linux 2.6.x on MPC52xx family
=============================
For the latest info, go to http://www.246tNt.com/mpc52xx/
To compile/use :
- U-Boot::
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
# make uImage
then, on U-boot:
=> tftpboot 200000 uImage
=> tftpboot 400000 pRamdisk
=> bootm 200000 400000
- DBug::
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
# cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
# make zImage.initrd
# make
then in DBug:
DBug> dn -i zImage.initrd.lite5200
Some remarks:
- The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
is not supported, and I'm not sure anyone is interesting in working on it
so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
nothing to do with the MPC5200. I also included the 'MPC' for the same
reason.
- Of course, I inspired myself from the 2.4 port. If you think I forgot to
mention you/your company in the copyright of some code, I'll correct it
ASAP.