forked from luck/tmp_suning_uos_patched
0854fa22b9
The only usage of mchp_tc_ops is to assign its address to the ops field in the counter_device struct which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/20200922201941.41328-1-rikard.falkeborn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
398 lines
10 KiB
C
398 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/**
|
|
* Copyright (C) 2020 Microchip
|
|
*
|
|
* Author: Kamel Bouhara <kamel.bouhara@bootlin.com>
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/counter.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <soc/at91/atmel_tcb.h>
|
|
|
|
#define ATMEL_TC_CMR_MASK (ATMEL_TC_LDRA_RISING | ATMEL_TC_LDRB_FALLING | \
|
|
ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_LDBDIS | \
|
|
ATMEL_TC_LDBSTOP)
|
|
|
|
#define ATMEL_TC_QDEN BIT(8)
|
|
#define ATMEL_TC_POSEN BIT(9)
|
|
|
|
struct mchp_tc_data {
|
|
const struct atmel_tcb_config *tc_cfg;
|
|
struct counter_device counter;
|
|
struct regmap *regmap;
|
|
int qdec_mode;
|
|
int num_channels;
|
|
int channel[2];
|
|
bool trig_inverted;
|
|
};
|
|
|
|
enum mchp_tc_count_function {
|
|
MCHP_TC_FUNCTION_INCREASE,
|
|
MCHP_TC_FUNCTION_QUADRATURE,
|
|
};
|
|
|
|
static enum counter_count_function mchp_tc_count_functions[] = {
|
|
[MCHP_TC_FUNCTION_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
|
|
[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
|
|
};
|
|
|
|
enum mchp_tc_synapse_action {
|
|
MCHP_TC_SYNAPSE_ACTION_NONE = 0,
|
|
MCHP_TC_SYNAPSE_ACTION_RISING_EDGE,
|
|
MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE,
|
|
MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE
|
|
};
|
|
|
|
static enum counter_synapse_action mchp_tc_synapse_actions[] = {
|
|
[MCHP_TC_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
|
|
[MCHP_TC_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
|
|
[MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
|
|
[MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
|
|
};
|
|
|
|
static struct counter_signal mchp_tc_count_signals[] = {
|
|
{
|
|
.id = 0,
|
|
.name = "Channel A",
|
|
},
|
|
{
|
|
.id = 1,
|
|
.name = "Channel B",
|
|
}
|
|
};
|
|
|
|
static struct counter_synapse mchp_tc_count_synapses[] = {
|
|
{
|
|
.actions_list = mchp_tc_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(mchp_tc_synapse_actions),
|
|
.signal = &mchp_tc_count_signals[0]
|
|
},
|
|
{
|
|
.actions_list = mchp_tc_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(mchp_tc_synapse_actions),
|
|
.signal = &mchp_tc_count_signals[1]
|
|
}
|
|
};
|
|
|
|
static int mchp_tc_count_function_get(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
size_t *function)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
|
|
if (priv->qdec_mode)
|
|
*function = MCHP_TC_FUNCTION_QUADRATURE;
|
|
else
|
|
*function = MCHP_TC_FUNCTION_INCREASE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_tc_count_function_set(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
size_t function)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
u32 bmr, cmr;
|
|
|
|
regmap_read(priv->regmap, ATMEL_TC_BMR, &bmr);
|
|
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
|
|
|
|
/* Set capture mode */
|
|
cmr &= ~ATMEL_TC_WAVE;
|
|
|
|
switch (function) {
|
|
case MCHP_TC_FUNCTION_INCREASE:
|
|
priv->qdec_mode = 0;
|
|
/* Set highest rate based on whether soc has gclk or not */
|
|
bmr &= ~(ATMEL_TC_QDEN | ATMEL_TC_POSEN);
|
|
if (priv->tc_cfg->has_gclk)
|
|
cmr |= ATMEL_TC_TIMER_CLOCK2;
|
|
else
|
|
cmr |= ATMEL_TC_TIMER_CLOCK1;
|
|
/* Setup the period capture mode */
|
|
cmr |= ATMEL_TC_CMR_MASK;
|
|
cmr &= ~(ATMEL_TC_ABETRG | ATMEL_TC_XC0);
|
|
break;
|
|
case MCHP_TC_FUNCTION_QUADRATURE:
|
|
if (!priv->tc_cfg->has_qdec)
|
|
return -EINVAL;
|
|
/* In QDEC mode settings both channels 0 and 1 are required */
|
|
if (priv->num_channels < 2 || priv->channel[0] != 0 ||
|
|
priv->channel[1] != 1) {
|
|
pr_err("Invalid channels number or id for quadrature mode\n");
|
|
return -EINVAL;
|
|
}
|
|
priv->qdec_mode = 1;
|
|
bmr |= ATMEL_TC_QDEN | ATMEL_TC_POSEN;
|
|
cmr |= ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_ABETRG | ATMEL_TC_XC0;
|
|
break;
|
|
}
|
|
|
|
regmap_write(priv->regmap, ATMEL_TC_BMR, bmr);
|
|
regmap_write(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), cmr);
|
|
|
|
/* Enable clock and trigger counter */
|
|
regmap_write(priv->regmap, ATMEL_TC_REG(priv->channel[0], CCR),
|
|
ATMEL_TC_CLKEN | ATMEL_TC_SWTRG);
|
|
|
|
if (priv->qdec_mode) {
|
|
regmap_write(priv->regmap,
|
|
ATMEL_TC_REG(priv->channel[1], CMR), cmr);
|
|
regmap_write(priv->regmap,
|
|
ATMEL_TC_REG(priv->channel[1], CCR),
|
|
ATMEL_TC_CLKEN | ATMEL_TC_SWTRG);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_tc_count_signal_read(struct counter_device *counter,
|
|
struct counter_signal *signal,
|
|
enum counter_signal_value *val)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
bool sigstatus;
|
|
u32 sr;
|
|
|
|
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], SR), &sr);
|
|
|
|
if (priv->trig_inverted)
|
|
sigstatus = (sr & ATMEL_TC_MTIOB);
|
|
else
|
|
sigstatus = (sr & ATMEL_TC_MTIOA);
|
|
|
|
*val = sigstatus ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_tc_count_action_get(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_synapse *synapse,
|
|
size_t *action)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
u32 cmr;
|
|
|
|
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
|
|
|
|
*action = MCHP_TC_SYNAPSE_ACTION_NONE;
|
|
|
|
if (cmr & ATMEL_TC_ETRGEDG_NONE)
|
|
*action = MCHP_TC_SYNAPSE_ACTION_NONE;
|
|
else if (cmr & ATMEL_TC_ETRGEDG_RISING)
|
|
*action = MCHP_TC_SYNAPSE_ACTION_RISING_EDGE;
|
|
else if (cmr & ATMEL_TC_ETRGEDG_FALLING)
|
|
*action = MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE;
|
|
else if (cmr & ATMEL_TC_ETRGEDG_BOTH)
|
|
*action = MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_tc_count_action_set(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_synapse *synapse,
|
|
size_t action)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
u32 edge = ATMEL_TC_ETRGEDG_NONE;
|
|
|
|
/* QDEC mode is rising edge only */
|
|
if (priv->qdec_mode)
|
|
return -EINVAL;
|
|
|
|
switch (action) {
|
|
case MCHP_TC_SYNAPSE_ACTION_NONE:
|
|
edge = ATMEL_TC_ETRGEDG_NONE;
|
|
break;
|
|
case MCHP_TC_SYNAPSE_ACTION_RISING_EDGE:
|
|
edge = ATMEL_TC_ETRGEDG_RISING;
|
|
break;
|
|
case MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE:
|
|
edge = ATMEL_TC_ETRGEDG_FALLING;
|
|
break;
|
|
case MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE:
|
|
edge = ATMEL_TC_ETRGEDG_BOTH;
|
|
break;
|
|
}
|
|
|
|
return regmap_write_bits(priv->regmap,
|
|
ATMEL_TC_REG(priv->channel[0], CMR),
|
|
ATMEL_TC_ETRGEDG, edge);
|
|
}
|
|
|
|
static int mchp_tc_count_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
unsigned long *val)
|
|
{
|
|
struct mchp_tc_data *const priv = counter->priv;
|
|
u32 cnt;
|
|
|
|
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CV), &cnt);
|
|
*val = cnt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct counter_count mchp_tc_counts[] = {
|
|
{
|
|
.id = 0,
|
|
.name = "Timer Counter",
|
|
.functions_list = mchp_tc_count_functions,
|
|
.num_functions = ARRAY_SIZE(mchp_tc_count_functions),
|
|
.synapses = mchp_tc_count_synapses,
|
|
.num_synapses = ARRAY_SIZE(mchp_tc_count_synapses),
|
|
},
|
|
};
|
|
|
|
static const struct counter_ops mchp_tc_ops = {
|
|
.signal_read = mchp_tc_count_signal_read,
|
|
.count_read = mchp_tc_count_read,
|
|
.function_get = mchp_tc_count_function_get,
|
|
.function_set = mchp_tc_count_function_set,
|
|
.action_get = mchp_tc_count_action_get,
|
|
.action_set = mchp_tc_count_action_set
|
|
};
|
|
|
|
static const struct atmel_tcb_config tcb_rm9200_config = {
|
|
.counter_width = 16,
|
|
};
|
|
|
|
static const struct atmel_tcb_config tcb_sam9x5_config = {
|
|
.counter_width = 32,
|
|
};
|
|
|
|
static const struct atmel_tcb_config tcb_sama5d2_config = {
|
|
.counter_width = 32,
|
|
.has_gclk = true,
|
|
.has_qdec = true,
|
|
};
|
|
|
|
static const struct atmel_tcb_config tcb_sama5d3_config = {
|
|
.counter_width = 32,
|
|
.has_qdec = true,
|
|
};
|
|
|
|
static const struct of_device_id atmel_tc_of_match[] = {
|
|
{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
|
|
{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
|
|
{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
|
|
{ .compatible = "atmel,sama5d3-tcb", .data = &tcb_sama5d3_config, },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static void mchp_tc_clk_remove(void *ptr)
|
|
{
|
|
clk_disable_unprepare((struct clk *)ptr);
|
|
}
|
|
|
|
static int mchp_tc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
const struct atmel_tcb_config *tcb_config;
|
|
const struct of_device_id *match;
|
|
struct mchp_tc_data *priv;
|
|
char clk_name[7];
|
|
struct regmap *regmap;
|
|
struct clk *clk[3];
|
|
int channel;
|
|
int ret, i;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
match = of_match_node(atmel_tc_of_match, np->parent);
|
|
tcb_config = match->data;
|
|
if (!tcb_config) {
|
|
dev_err(&pdev->dev, "No matching parent node found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regmap = syscon_node_to_regmap(np->parent);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
/* max. channels number is 2 when in QDEC mode */
|
|
priv->num_channels = of_property_count_u32_elems(np, "reg");
|
|
if (priv->num_channels < 0) {
|
|
dev_err(&pdev->dev, "Invalid or missing channel\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Register channels and initialize clocks */
|
|
for (i = 0; i < priv->num_channels; i++) {
|
|
ret = of_property_read_u32_index(np, "reg", i, &channel);
|
|
if (ret < 0 || channel > 2)
|
|
return -ENODEV;
|
|
|
|
priv->channel[i] = channel;
|
|
|
|
snprintf(clk_name, sizeof(clk_name), "t%d_clk", channel);
|
|
|
|
clk[i] = of_clk_get_by_name(np->parent, clk_name);
|
|
if (IS_ERR(clk[i])) {
|
|
/* Fallback to t0_clk */
|
|
clk[i] = of_clk_get_by_name(np->parent, "t0_clk");
|
|
if (IS_ERR(clk[i]))
|
|
return PTR_ERR(clk[i]);
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk[i]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&pdev->dev,
|
|
mchp_tc_clk_remove,
|
|
clk[i]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(&pdev->dev,
|
|
"Initialized capture mode on channel %d\n",
|
|
channel);
|
|
}
|
|
|
|
priv->tc_cfg = tcb_config;
|
|
priv->regmap = regmap;
|
|
priv->counter.name = dev_name(&pdev->dev);
|
|
priv->counter.parent = &pdev->dev;
|
|
priv->counter.ops = &mchp_tc_ops;
|
|
priv->counter.num_counts = ARRAY_SIZE(mchp_tc_counts);
|
|
priv->counter.counts = mchp_tc_counts;
|
|
priv->counter.num_signals = ARRAY_SIZE(mchp_tc_count_signals);
|
|
priv->counter.signals = mchp_tc_count_signals;
|
|
priv->counter.priv = priv;
|
|
|
|
return devm_counter_register(&pdev->dev, &priv->counter);
|
|
}
|
|
|
|
static const struct of_device_id mchp_tc_dt_ids[] = {
|
|
{ .compatible = "microchip,tcb-capture", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mchp_tc_dt_ids);
|
|
|
|
static struct platform_driver mchp_tc_driver = {
|
|
.probe = mchp_tc_probe,
|
|
.driver = {
|
|
.name = "microchip-tcb-capture",
|
|
.of_match_table = mchp_tc_dt_ids,
|
|
},
|
|
};
|
|
module_platform_driver(mchp_tc_driver);
|
|
|
|
MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
|
|
MODULE_DESCRIPTION("Microchip TCB Capture driver");
|
|
MODULE_LICENSE("GPL v2");
|