forked from luck/tmp_suning_uos_patched
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
102 lines
2.8 KiB
C
102 lines
2.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* usr/include/linux/lp.h c.1991-1992 James Wiegand
|
|
* many modifications copyright (C) 1992 Michael K. Johnson
|
|
* Interrupt support added 1993 Nigel Gamble
|
|
* Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti
|
|
*/
|
|
#ifndef _LINUX_LP_H
|
|
#define _LINUX_LP_H
|
|
|
|
|
|
#include <linux/wait.h>
|
|
#include <linux/mutex.h>
|
|
#include <uapi/linux/lp.h>
|
|
|
|
/* Magic numbers for defining port-device mappings */
|
|
#define LP_PARPORT_UNSPEC -4
|
|
#define LP_PARPORT_AUTO -3
|
|
#define LP_PARPORT_OFF -2
|
|
#define LP_PARPORT_NONE -1
|
|
|
|
#define LP_F(minor) lp_table[(minor)].flags /* flags for busy, etc. */
|
|
#define LP_CHAR(minor) lp_table[(minor)].chars /* busy timeout */
|
|
#define LP_TIME(minor) lp_table[(minor)].time /* wait time */
|
|
#define LP_WAIT(minor) lp_table[(minor)].wait /* strobe wait */
|
|
#define LP_IRQ(minor) lp_table[(minor)].dev->port->irq /* interrupt # */
|
|
/* PARPORT_IRQ_NONE means polled */
|
|
#ifdef LP_STATS
|
|
#define LP_STAT(minor) lp_table[(minor)].stats /* statistics area */
|
|
#endif
|
|
#define LP_BUFFER_SIZE PAGE_SIZE
|
|
|
|
#define LP_BASE(x) lp_table[(x)].dev->port->base
|
|
|
|
#ifdef LP_STATS
|
|
struct lp_stats {
|
|
unsigned long chars;
|
|
unsigned long sleeps;
|
|
unsigned int maxrun;
|
|
unsigned int maxwait;
|
|
unsigned int meanwait;
|
|
unsigned int mdev;
|
|
};
|
|
#endif
|
|
|
|
struct lp_struct {
|
|
struct pardevice *dev;
|
|
unsigned long flags;
|
|
unsigned int chars;
|
|
unsigned int time;
|
|
unsigned int wait;
|
|
char *lp_buffer;
|
|
#ifdef LP_STATS
|
|
unsigned int lastcall;
|
|
unsigned int runchars;
|
|
struct lp_stats stats;
|
|
#endif
|
|
wait_queue_head_t waitq;
|
|
unsigned int last_error;
|
|
struct mutex port_mutex;
|
|
wait_queue_head_t dataq;
|
|
long timeout;
|
|
unsigned int best_mode;
|
|
unsigned int current_mode;
|
|
unsigned long bits;
|
|
};
|
|
|
|
/*
|
|
* The following constants describe the various signals of the printer port
|
|
* hardware. Note that the hardware inverts some signals and that some
|
|
* signals are active low. An example is LP_STROBE, which must be programmed
|
|
* with 1 for being active and 0 for being inactive, because the strobe signal
|
|
* gets inverted, but it is also active low.
|
|
*/
|
|
|
|
|
|
/*
|
|
* defines for 8255 control port
|
|
* base + 2
|
|
* accessed with LP_C(minor)
|
|
*/
|
|
#define LP_PINTEN 0x10 /* high to read data in or-ed with data out */
|
|
#define LP_PSELECP 0x08 /* inverted output, active low */
|
|
#define LP_PINITP 0x04 /* unchanged output, active low */
|
|
#define LP_PAUTOLF 0x02 /* inverted output, active low */
|
|
#define LP_PSTROBE 0x01 /* short high output on raising edge */
|
|
|
|
/*
|
|
* the value written to ports to test existence. PC-style ports will
|
|
* return the value written. AT-style ports will return 0. so why not
|
|
* make them the same ?
|
|
*/
|
|
#define LP_DUMMY 0x00
|
|
|
|
/*
|
|
* This is the port delay time, in microseconds.
|
|
* It is used only in the lp_init() and lp_reset() routine.
|
|
*/
|
|
#define LP_DELAY 50
|
|
|
|
#endif
|