kernel_optimize_test/drivers/scsi/libsas/sas_dump.c
James Bottomley 96db6fa992 [SCSI] libsas: convert to standard kernel debugging
Instead of using a config option for debugging, just dump the
messages with KERN_DEBUG.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 12:05:38 -06:00

73 lines
2.3 KiB
C

/*
* Serial Attached SCSI (SAS) Dump/Debugging routines
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_dump.h"
static const char *sas_hae_str[] = {
[0] = "HAE_RESET",
};
static const char *sas_porte_str[] = {
[0] = "PORTE_BYTES_DMAED",
[1] = "PORTE_BROADCAST_RCVD",
[2] = "PORTE_LINK_RESET_ERR",
[3] = "PORTE_TIMER_EVENT",
[4] = "PORTE_HARD_RESET",
};
static const char *sas_phye_str[] = {
[0] = "PHYE_LOSS_OF_SIGNAL",
[1] = "PHYE_OOB_DONE",
[2] = "PHYE_OOB_ERROR",
[3] = "PHYE_SPINUP_HOLD",
};
void sas_dprint_porte(int phyid, enum port_event pe)
{
SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
}
void sas_dprint_phye(int phyid, enum phy_event pe)
{
SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
}
void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
{
SAS_DPRINTK("ha %s: %s event\n", dev_name(sas_ha->dev),
sas_hae_str[he]);
}
void sas_dump_port(struct asd_sas_port *port)
{
SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
SAS_ADDR(port->sas_addr));
SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
SAS_ADDR(port->attached_sas_addr));
SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
}