kernel_optimize_test/drivers/serial
Robert Reif 227739bf4c sparc: sunzilog uart order
I have a sparcstation 20 clone with a lot of on board serial ports.
The serial core code assumes that uarts are assigned contiguously
and that may not be the case when there are multiple zs devices
present.  This patch insures that uart chips are placed in front of
keyboard/mouse chips in the port table.

ffd37420: ttyS0 at MMIO 0xf1100000 (irq = 44) is a zs (ESCC)
Console: ttyS0 (SunZilog zs0)
console [ttyS0] enabled
ffd37420: ttyS1 at MMIO 0xf1100004 (irq = 44) is a zs (ESCC)
ffd37500: Keyboard at MMIO 0xf1000000 (irq = 44) is a zs
ffd37500: Mouse at MMIO 0xf1000004 (irq = 44) is a zs
ffd3c5c0: ttyS2 at MMIO 0xf1100008 (irq = 44) is a zs (ESCC)
ffd3c5c0: ttyS3 at MMIO 0xf110000c (irq = 44) is a zs (ESCC)
ffd3c6a0: ttyS4 at MMIO 0xf1100010 (irq = 44) is a zs (ESCC)
ffd3c6a0: ttyS5 at MMIO 0xf1100014 (irq = 44) is a zs (ESCC)
ffd3c780: ttyS6 at MMIO 0xf1100018 (irq = 44) is a zs (ESCC)
ffd3c780: ttyS7 at MMIO 0xf110001c (irq = 44) is a zs (ESCC)

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 03:37:51 -07:00
..
cpm_uart [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms. 2008-04-17 01:01:36 -05:00
jsm jsm: Remove further unneeded crud 2007-10-17 08:42:52 -07:00
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c 8250_early: coding style 2008-02-08 09:22:25 -08:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c 8250_gsc: coding style 2008-02-08 09:22:25 -08:00
8250_hp300.c 8250_hp300: coding style 2008-02-08 09:22:25 -08:00
8250_hub6.c 8250_hub6: codding style 2008-02-08 09:22:25 -08:00
8250_mca.c
8250_pci.c 8250_pci: duplicate initializer in array ([pbn_b0_8_115200]) 2008-03-30 14:20:24 -07:00
8250_pnp.c serial: add PNP ID GVC0303 for Archtek 3334BRV ISA modem 2008-03-04 16:35:09 -08:00
8250.c consoles: polling support, kgdboc 2008-04-17 20:05:37 +02:00
8250.h
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c Char: char/serial, remove SERIAL_TYPE_NORMAL redefines 2008-02-07 08:42:33 -08:00
68328serial.h
68360serial.c 68360serial: remove broken optimisation 2007-07-16 09:05:51 -07:00
amba-pl010.c
amba-pl011.c kgdb: kgdboc pl011 I/O module 2008-04-17 20:05:39 +02:00
atmel_serial.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
bfin_5xx.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
clps711x.c
crisv10.c Char: char/serial, remove SERIAL_TYPE_NORMAL redefines 2008-02-07 08:42:33 -08:00
crisv10.h CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
dz.c dz.c: Resource management 2008-02-07 08:42:24 -08:00
dz.h dz: clean up and improve the setup of termios settings 2008-02-07 08:42:24 -08:00
icom.c kobject: convert icom to use kref, not kobject 2008-01-24 20:40:09 -08:00
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c Merge branch 'merge-fixes' into devel 2008-04-19 17:17:34 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c IP22ZILOG: fix lockup and sysrq 2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig consoles: polling support, kgdboc 2008-04-17 20:05:37 +02:00
kgdboc.c kgdb: fix kgdboc dynamic module configuration 2008-04-17 20:05:38 +02:00
m32r_sio_reg.h
m32r_sio.c drivers/serial/m32r_sio.c: correct use of ! and & 2008-03-04 16:35:16 -08:00
m32r_sio.h m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
Makefile consoles: polling support, kgdboc 2008-04-17 20:05:37 +02:00
mcf.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mcfserial.c drivers: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:32 -04:00
mcfserial.h
mpc52xx_uart.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mpsc.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
of_serial.c [POWERPC] of_serial: Fix possible null dereference. 2008-04-02 20:29:32 -05:00
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h
pnx8xxx_uart.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
pxa.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
s3c2410.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
sa1100.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
sc26xx.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
serial_core.c PM: Fix misuse of wakeup flag accessors in serial core 2008-04-19 19:10:25 -07:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c serial: fix serial_txx9 console initialization 2007-10-30 08:06:55 -07:00
sh-sci.c sh: Add support for SH7723 CPU subtype. 2008-04-18 09:50:07 -07:00
sh-sci.h sh: Add support for SH7723 CPU subtype. 2008-04-18 09:50:07 -07:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SERIAL]: Fix section mismatches in Sun serial console drivers. 2007-12-29 01:19:49 -08:00
suncore.h [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunhv.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.c sparc: sunzilog uart order 2008-04-24 03:37:51 -07:00
sunzilog.h
uartlite.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
ucc_uart.c [POWERPC] QE: UCC nodes cleanup 2008-04-17 01:01:38 -05:00
v850e_uart.c
vr41xx_siu.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00