forked from luck/tmp_suning_uos_patched
685f5f2410
The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.
Fixes: 57aadb46bd
("usb: musb: jz4740: Add support for DMA")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
298 lines
7.7 KiB
C
298 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Ingenic JZ4740 "glue layer"
|
|
*
|
|
* Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/role.h>
|
|
#include <linux/usb/usb_phy_generic.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
struct jz4740_glue {
|
|
struct platform_device *pdev;
|
|
struct musb *musb;
|
|
struct clk *clk;
|
|
struct usb_role_switch *role_sw;
|
|
};
|
|
|
|
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
|
|
{
|
|
unsigned long flags;
|
|
irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
|
|
struct musb *musb = __hci;
|
|
|
|
if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
|
|
retval_dma = dma_controller_irq(irq, musb->dma_controller);
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
|
|
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
|
|
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
|
|
|
|
/*
|
|
* The controller is gadget only, the state of the host mode IRQ bits is
|
|
* undefined. Mask them to make sure that the musb driver core will
|
|
* never see them set
|
|
*/
|
|
musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
|
|
MUSB_INTR_RESET | MUSB_INTR_SOF;
|
|
|
|
if (musb->int_usb || musb->int_tx || musb->int_rx)
|
|
retval = musb_interrupt(musb);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
|
|
return IRQ_HANDLED;
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
|
|
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
|
|
};
|
|
|
|
static const struct musb_hdrc_config jz4740_musb_config = {
|
|
/* Silicon does not implement USB OTG. */
|
|
.multipoint = 0,
|
|
/* Max EPs scanned, driver will decide which EP can be used. */
|
|
.num_eps = 4,
|
|
/* RAMbits needed to configure EPs from table */
|
|
.ram_bits = 9,
|
|
.fifo_cfg = jz4740_musb_fifo_cfg,
|
|
.fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
|
|
};
|
|
|
|
static int jz4740_musb_role_switch_set(struct usb_role_switch *sw,
|
|
enum usb_role role)
|
|
{
|
|
struct jz4740_glue *glue = usb_role_switch_get_drvdata(sw);
|
|
struct usb_phy *phy = glue->musb->xceiv;
|
|
|
|
switch (role) {
|
|
case USB_ROLE_NONE:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_NONE, phy);
|
|
break;
|
|
case USB_ROLE_DEVICE:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_VBUS, phy);
|
|
break;
|
|
case USB_ROLE_HOST:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_ID, phy);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_musb_init(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller->parent;
|
|
struct jz4740_glue *glue = dev_get_drvdata(dev);
|
|
struct usb_role_switch_desc role_sw_desc = {
|
|
.set = jz4740_musb_role_switch_set,
|
|
.driver_data = glue,
|
|
.fwnode = dev_fwnode(dev),
|
|
};
|
|
int err;
|
|
|
|
glue->musb = musb;
|
|
|
|
if (dev->of_node)
|
|
musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
|
|
else
|
|
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR(musb->xceiv)) {
|
|
err = PTR_ERR(musb->xceiv);
|
|
if (err != -EPROBE_DEFER)
|
|
dev_err(dev, "No transceiver configured: %d", err);
|
|
return err;
|
|
}
|
|
|
|
glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
|
|
if (IS_ERR(glue->role_sw)) {
|
|
dev_err(dev, "Failed to register USB role switch");
|
|
return PTR_ERR(glue->role_sw);
|
|
}
|
|
|
|
/*
|
|
* Silicon does not implement ConfigData register.
|
|
* Set dyn_fifo to avoid reading EP config from hardware.
|
|
*/
|
|
musb->dyn_fifo = true;
|
|
|
|
musb->isr = jz4740_musb_interrupt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_musb_exit(struct musb *musb)
|
|
{
|
|
struct jz4740_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
|
|
usb_role_switch_unregister(glue->role_sw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops jz4740_musb_ops = {
|
|
.quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
|
|
.fifo_mode = 2,
|
|
.init = jz4740_musb_init,
|
|
.exit = jz4740_musb_exit,
|
|
#ifdef CONFIG_USB_INVENTRA_DMA
|
|
.dma_init = musbhs_dma_controller_create_noirq,
|
|
.dma_exit = musbhs_dma_controller_destroy,
|
|
#endif
|
|
};
|
|
|
|
static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
|
|
.mode = MUSB_PERIPHERAL,
|
|
.config = &jz4740_musb_config,
|
|
.platform_ops = &jz4740_musb_ops,
|
|
};
|
|
|
|
static struct musb_fifo_cfg jz4770_musb_fifo_cfg[] = {
|
|
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
|
|
};
|
|
|
|
static struct musb_hdrc_config jz4770_musb_config = {
|
|
.multipoint = 1,
|
|
.num_eps = 11,
|
|
.ram_bits = 11,
|
|
.fifo_cfg = jz4770_musb_fifo_cfg,
|
|
.fifo_cfg_size = ARRAY_SIZE(jz4770_musb_fifo_cfg),
|
|
};
|
|
|
|
static const struct musb_hdrc_platform_data jz4770_musb_pdata = {
|
|
.mode = MUSB_PERIPHERAL, /* TODO: support OTG */
|
|
.config = &jz4770_musb_config,
|
|
.platform_ops = &jz4740_musb_ops,
|
|
};
|
|
|
|
static int jz4740_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct musb_hdrc_platform_data *pdata;
|
|
struct platform_device *musb;
|
|
struct jz4740_glue *glue;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue)
|
|
return -ENOMEM;
|
|
|
|
pdata = of_device_get_match_data(dev);
|
|
if (!pdata) {
|
|
dev_err(dev, "missing platform data");
|
|
return -EINVAL;
|
|
}
|
|
|
|
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
|
|
if (!musb) {
|
|
dev_err(dev, "failed to allocate musb device");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
clk = devm_clk_get(dev, "udc");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to get clock");
|
|
ret = PTR_ERR(clk);
|
|
goto err_platform_device_put;
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock");
|
|
goto err_platform_device_put;
|
|
}
|
|
|
|
musb->dev.parent = dev;
|
|
musb->dev.dma_mask = &musb->dev.coherent_dma_mask;
|
|
musb->dev.coherent_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
glue->pdev = musb;
|
|
glue->clk = clk;
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
ret = platform_device_add_resources(musb, pdev->resource,
|
|
pdev->num_resources);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add resources");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
|
|
if (ret) {
|
|
dev_err(dev, "failed to add platform_data");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register musb device");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk_disable:
|
|
clk_disable_unprepare(clk);
|
|
err_platform_device_put:
|
|
platform_device_put(musb);
|
|
return ret;
|
|
}
|
|
|
|
static int jz4740_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz4740_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(glue->pdev);
|
|
clk_disable_unprepare(glue->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id jz4740_musb_of_match[] = {
|
|
{ .compatible = "ingenic,jz4740-musb", .data = &jz4740_musb_pdata },
|
|
{ .compatible = "ingenic,jz4770-musb", .data = &jz4770_musb_pdata },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
|
|
|
|
static struct platform_driver jz4740_driver = {
|
|
.probe = jz4740_probe,
|
|
.remove = jz4740_remove,
|
|
.driver = {
|
|
.name = "musb-jz4740",
|
|
.of_match_table = jz4740_musb_of_match,
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
|
|
MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
|
|
MODULE_LICENSE("GPL v2");
|
|
module_platform_driver(jz4740_driver);
|