forked from luck/tmp_suning_uos_patched
7eb25ebee8
Directives such as .long and .word do not magically cause the
assembler location counter to become aligned in gas. As a result,
using these directives in code sections can result in misaligned
data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL).
This is a Bad Thing, since the ABI permits the compiler to assume
that fundamental types of word size or above are word- aligned when
accessing them from C. If the data is not really word-aligned,
this can cause impaired performance and stray alignment faults in
some circumstances.
In general, the following rules should be applied when using data
word declaration directives inside code sections:
* .quad and .double:
.align 3
* .long, .word, .single, .float:
.align (or .align 2)
* .short:
No explicit alignment required, since Thumb-2
instructions are always 2 or 4 bytes in size.
immediately after an instruction.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
287 lines
7.3 KiB
ArmAsm
287 lines
7.3 KiB
ArmAsm
/*
|
|
* linux/arch/arm/vfp/vfphw.S
|
|
*
|
|
* Copyright (C) 2004 ARM Limited.
|
|
* Written by Deep Blue Solutions Limited.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This code is called from the kernel's undefined instruction trap.
|
|
* r9 holds the return address for successful handling.
|
|
* lr holds the return address for unrecognised instructions.
|
|
* r10 points at the start of the private FP workspace in the thread structure
|
|
* sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
|
|
*/
|
|
#include <asm/thread_info.h>
|
|
#include <asm/vfpmacros.h>
|
|
#include "../kernel/entry-header.S"
|
|
|
|
.macro DBGSTR, str
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
add r0, pc, #4
|
|
bl printk
|
|
b 1f
|
|
.asciz "<7>VFP: \str\n"
|
|
.balign 4
|
|
1: ldmfd sp!, {r0-r3, ip, lr}
|
|
#endif
|
|
.endm
|
|
|
|
.macro DBGSTR1, str, arg
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r1, \arg
|
|
add r0, pc, #4
|
|
bl printk
|
|
b 1f
|
|
.asciz "<7>VFP: \str\n"
|
|
.balign 4
|
|
1: ldmfd sp!, {r0-r3, ip, lr}
|
|
#endif
|
|
.endm
|
|
|
|
.macro DBGSTR3, str, arg1, arg2, arg3
|
|
#ifdef DEBUG
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r3, \arg3
|
|
mov r2, \arg2
|
|
mov r1, \arg1
|
|
add r0, pc, #4
|
|
bl printk
|
|
b 1f
|
|
.asciz "<7>VFP: \str\n"
|
|
.balign 4
|
|
1: ldmfd sp!, {r0-r3, ip, lr}
|
|
#endif
|
|
.endm
|
|
|
|
|
|
@ VFP hardware support entry point.
|
|
@
|
|
@ r0 = faulted instruction
|
|
@ r2 = faulted PC+4
|
|
@ r9 = successful return
|
|
@ r10 = vfp_state union
|
|
@ r11 = CPU number
|
|
@ lr = failure return
|
|
|
|
ENTRY(vfp_support_entry)
|
|
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
|
|
|
|
VFPFMRX r1, FPEXC @ Is the VFP enabled?
|
|
DBGSTR1 "fpexc %08x", r1
|
|
tst r1, #FPEXC_EN
|
|
bne look_for_VFP_exceptions @ VFP is already enabled
|
|
|
|
DBGSTR1 "enable %x", r10
|
|
ldr r3, last_VFP_context_address
|
|
orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set
|
|
ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer
|
|
bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled
|
|
cmp r4, r10
|
|
beq check_for_exception @ we are returning to the same
|
|
@ process, so the registers are
|
|
@ still there. In this case, we do
|
|
@ not want to drop a pending exception.
|
|
|
|
VFPFMXR FPEXC, r5 @ enable VFP, disable any pending
|
|
@ exceptions, so we can get at the
|
|
@ rest of it
|
|
|
|
#ifndef CONFIG_SMP
|
|
@ Save out the current registers to the old thread state
|
|
@ No need for SMP since this is not done lazily
|
|
|
|
DBGSTR1 "save old state %p", r4
|
|
cmp r4, #0
|
|
beq no_old_VFP_process
|
|
VFPFSTMIA r4, r5 @ save the working registers
|
|
VFPFMRX r5, FPSCR @ current status
|
|
#ifndef CONFIG_CPU_FEROCEON
|
|
tst r1, #FPEXC_EX @ is there additional state to save?
|
|
beq 1f
|
|
VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
|
|
beq 1f
|
|
VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present)
|
|
1:
|
|
#endif
|
|
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
|
|
@ and point r4 at the word at the
|
|
@ start of the register dump
|
|
#endif
|
|
|
|
no_old_VFP_process:
|
|
DBGSTR1 "load state %p", r10
|
|
str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
|
|
@ Load the saved state back into the VFP
|
|
VFPFLDMIA r10, r5 @ reload the working registers while
|
|
@ FPEXC is in a safe state
|
|
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
|
|
#ifndef CONFIG_CPU_FEROCEON
|
|
tst r1, #FPEXC_EX @ is there additional state to restore?
|
|
beq 1f
|
|
VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to write?
|
|
beq 1f
|
|
VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present)
|
|
1:
|
|
#endif
|
|
VFPFMXR FPSCR, r5 @ restore status
|
|
|
|
check_for_exception:
|
|
tst r1, #FPEXC_EX
|
|
bne process_exception @ might as well handle the pending
|
|
@ exception before retrying branch
|
|
@ out before setting an FPEXC that
|
|
@ stops us reading stuff
|
|
VFPFMXR FPEXC, r1 @ restore FPEXC last
|
|
sub r2, r2, #4
|
|
str r2, [sp, #S_PC] @ retry the instruction
|
|
#ifdef CONFIG_PREEMPT
|
|
get_thread_info r10
|
|
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
|
|
sub r11, r4, #1 @ decrement it
|
|
str r11, [r10, #TI_PREEMPT]
|
|
#endif
|
|
mov pc, r9 @ we think we have handled things
|
|
|
|
|
|
look_for_VFP_exceptions:
|
|
@ Check for synchronous or asynchronous exception
|
|
tst r1, #FPEXC_EX | FPEXC_DEX
|
|
bne process_exception
|
|
@ On some implementations of the VFP subarch 1, setting FPSCR.IXE
|
|
@ causes all the CDP instructions to be bounced synchronously without
|
|
@ setting the FPEXC.EX bit
|
|
VFPFMRX r5, FPSCR
|
|
tst r5, #FPSCR_IXE
|
|
bne process_exception
|
|
|
|
@ Fall into hand on to next handler - appropriate coproc instr
|
|
@ not recognised by VFP
|
|
|
|
DBGSTR "not VFP"
|
|
#ifdef CONFIG_PREEMPT
|
|
get_thread_info r10
|
|
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
|
|
sub r11, r4, #1 @ decrement it
|
|
str r11, [r10, #TI_PREEMPT]
|
|
#endif
|
|
mov pc, lr
|
|
|
|
process_exception:
|
|
DBGSTR "bounce"
|
|
mov r2, sp @ nothing stacked - regdump is at TOS
|
|
mov lr, r9 @ setup for a return to the user code.
|
|
|
|
@ Now call the C code to package up the bounce to the support code
|
|
@ r0 holds the trigger instruction
|
|
@ r1 holds the FPEXC value
|
|
@ r2 pointer to register dump
|
|
b VFP_bounce @ we have handled this - the support
|
|
@ code will raise an exception if
|
|
@ required. If not, the user code will
|
|
@ retry the faulted instruction
|
|
ENDPROC(vfp_support_entry)
|
|
|
|
ENTRY(vfp_save_state)
|
|
@ Save the current VFP state
|
|
@ r0 - save location
|
|
@ r1 - FPEXC
|
|
DBGSTR1 "save VFP state %p", r0
|
|
VFPFSTMIA r0, r2 @ save the working registers
|
|
VFPFMRX r2, FPSCR @ current status
|
|
tst r1, #FPEXC_EX @ is there additional state to save?
|
|
beq 1f
|
|
VFPFMRX r3, FPINST @ FPINST (only if FPEXC.EX is set)
|
|
tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
|
|
beq 1f
|
|
VFPFMRX r12, FPINST2 @ FPINST2 if needed (and present)
|
|
1:
|
|
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
|
|
mov pc, lr
|
|
ENDPROC(vfp_save_state)
|
|
|
|
.align
|
|
last_VFP_context_address:
|
|
.word last_VFP_context
|
|
|
|
.macro tbl_branch, base, tmp, shift
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
adr \tmp, 1f
|
|
add \tmp, \tmp, \base, lsl \shift
|
|
mov pc, \tmp
|
|
#else
|
|
add pc, pc, \base, lsl \shift
|
|
mov r0, r0
|
|
#endif
|
|
1:
|
|
.endm
|
|
|
|
ENTRY(vfp_get_float)
|
|
tbl_branch r0, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
ENDPROC(vfp_get_float)
|
|
|
|
ENTRY(vfp_put_float)
|
|
tbl_branch r1, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
ENDPROC(vfp_put_float)
|
|
|
|
ENTRY(vfp_get_double)
|
|
tbl_branch r0, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: fmrrd r0, r1, d\dr
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
#ifdef CONFIG_VFPv3
|
|
@ d16 - d31 registers
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
#endif
|
|
|
|
@ virtual register 16 (or 32 if VFPv3) for compare with zero
|
|
mov r0, #0
|
|
mov r1, #0
|
|
mov pc, lr
|
|
ENDPROC(vfp_get_double)
|
|
|
|
ENTRY(vfp_put_double)
|
|
tbl_branch r2, r3, #3
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: fmdrr d\dr, r0, r1
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
#ifdef CONFIG_VFPv3
|
|
@ d16 - d31 registers
|
|
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
|
|
1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
|
|
mov pc, lr
|
|
.org 1b + 8
|
|
.endr
|
|
#endif
|
|
ENDPROC(vfp_put_double)
|